[U-Boot] [PATCH 1/2] imx6ul: opos6ul: add SPL_DM support
Sébastien Szymanski
sebastien.szymanski at armadeus.com
Tue Apr 17 13:41:11 UTC 2018
Since commit commit 152038ea1886 ("i.MX6UL: icore: Add SPL_OF_CONTROL
support") the OPOS6UL board doesn't boot anymore. Adding SPL_DM support
makes the board boot again.
Fixes: commit 152038ea1886 ("i.MX6UL: icore: Add SPL_OF_CONTROL support")
Signed-off-by: Sébastien Szymanski <sebastien.szymanski at armadeus.com>
---
arch/arm/dts/imx6ul-opos6ul.dtsi | 4 ++-
arch/arm/dts/imx6ul-opos6uldev.dts | 2 ++
arch/arm/dts/imx6ul.dtsi | 1 +
arch/arm/include/asm/arch-mx6/opos6ul.h | 4 ---
arch/arm/mach-imx/mx6/Kconfig | 4 +++
arch/arm/mach-imx/mx6/opos6ul.c | 50 ++++-----------------------------
board/armadeus/opos6uldev/board.c | 20 +------------
configs/opos6uldev_defconfig | 5 ++++
include/configs/opos6uldev.h | 9 ++----
9 files changed, 25 insertions(+), 74 deletions(-)
diff --git a/arch/arm/dts/imx6ul-opos6ul.dtsi b/arch/arm/dts/imx6ul-opos6ul.dtsi
index 51095df33a..d51ad4de20 100644
--- a/arch/arm/dts/imx6ul-opos6ul.dtsi
+++ b/arch/arm/dts/imx6ul-opos6ul.dtsi
@@ -1,5 +1,5 @@
/*
- * Copyright 2017 Armadeus Systems <support at armadeus.com>
+ * Copyright 2018 Armadeus Systems <support at armadeus.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
@@ -99,6 +99,7 @@
/* eMMC */
&usdhc1 {
+ u-boot,dm-spl;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1>;
bus-width = <8>;
@@ -161,6 +162,7 @@
};
pinctrl_usdhc1: usdhc1grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
diff --git a/arch/arm/dts/imx6ul-opos6uldev.dts b/arch/arm/dts/imx6ul-opos6uldev.dts
index 0e59ee57fd..9a51d1e54f 100644
--- a/arch/arm/dts/imx6ul-opos6uldev.dts
+++ b/arch/arm/dts/imx6ul-opos6uldev.dts
@@ -228,6 +228,7 @@
};
&uart1 {
+ u-boot,dm-spl;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
@@ -373,6 +374,7 @@
};
pinctrl_uart1: uart1grp {
+ u-boot,dm-spl;
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
diff --git a/arch/arm/dts/imx6ul.dtsi b/arch/arm/dts/imx6ul.dtsi
index b63f5a53ac..d5ce3f13c2 100644
--- a/arch/arm/dts/imx6ul.dtsi
+++ b/arch/arm/dts/imx6ul.dtsi
@@ -194,6 +194,7 @@
#size-cells = <1>;
reg = <0x02000000 0x40000>;
ranges;
+ u-boot,dm-spl;
ecspi1: ecspi at 02008000 {
#address-cells = <1>;
diff --git a/arch/arm/include/asm/arch-mx6/opos6ul.h b/arch/arm/include/asm/arch-mx6/opos6ul.h
index b5363850d2..8adff67cea 100644
--- a/arch/arm/include/asm/arch-mx6/opos6ul.h
+++ b/arch/arm/include/asm/arch-mx6/opos6ul.h
@@ -9,8 +9,4 @@
int opos6ul_board_late_init(void);
-#ifdef CONFIG_SPL_BUILD
-void opos6ul_setup_uart_debug(void);
-#endif
-
#endif
diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig
index aa6f5facbf..98ea1f566c 100644
--- a/arch/arm/mach-imx/mx6/Kconfig
+++ b/arch/arm/mach-imx/mx6/Kconfig
@@ -73,6 +73,10 @@ config MX6UL_OPOS6UL
select DM_MMC
select DM_THERMAL
select SUPPORT_SPL
+ select SPL_DM if SPL
+ select SPL_OF_CONTROL if SPL
+ select SPL_SEPARATE_BSS if SPL
+ select SPL_PINCTRL if SPL
config MX6ULL
select SYS_L2CACHE_OFF
diff --git a/arch/arm/mach-imx/mx6/opos6ul.c b/arch/arm/mach-imx/mx6/opos6ul.c
index 2de1321b56..ef70a7d323 100644
--- a/arch/arm/mach-imx/mx6/opos6ul.c
+++ b/arch/arm/mach-imx/mx6/opos6ul.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2017 Armadeus Systems
+ * Copyright (C) 2018 Armadeus Systems
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -9,15 +9,12 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mx6-pins.h>
-#include <asm/arch/mx6ul_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/io.h>
#include <common.h>
#include <environment.h>
-#include <fsl_esdhc.h>
-#include <mmc.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -138,12 +135,6 @@ int board_late_init(void)
return opos6ul_board_late_init();
}
-int board_mmc_getcd(struct mmc *mmc)
-{
- struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
- return cfg->esdhc_base == USDHC1_BASE_ADDR;
-}
-
int dram_init(void)
{
gd->ram_size = imx_ddr_size();
@@ -153,32 +144,9 @@ int dram_init(void)
#ifdef CONFIG_SPL_BUILD
#include <asm/arch/mx6-ddr.h>
-#include <asm/arch/opos6ul.h>
#include <linux/libfdt.h>
#include <spl.h>
-#define USDHC_PAD_CTRL ( \
- PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST \
-)
-
-struct fsl_esdhc_cfg usdhc_cfg[1] = {
- {USDHC1_BASE_ADDR, 0, 8},
-};
-
-static iomux_v3_cfg_t const usdhc1_pads[] = {
- MX6_PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NAND_READY_B__USDHC1_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NAND_CE0_B__USDHC1_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NAND_CE1_B__USDHC1_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
- MX6_PAD_NAND_CLE__USDHC1_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-};
-
static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
.grp_addds = 0x00000030,
.grp_ddrmode_ctl = 0x00020000,
@@ -240,13 +208,6 @@ static struct mx6_ddr3_cfg mem_ddr = {
.trasmin = 3750,
};
-int board_mmc_init(bd_t *bis)
-{
- imx_iomux_v3_setup_multiple_pads(usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
- usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
- return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
-}
-
static void ccgr_init(void)
{
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
@@ -282,6 +243,11 @@ static void spl_dram_init(void)
mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
}
+void spl_board_init(void)
+{
+ preloader_console_init();
+}
+
void board_init_f(ulong dummy)
{
ccgr_init();
@@ -292,10 +258,6 @@ void board_init_f(ulong dummy)
/* setup GP timer */
timer_init();
- /* UART clocks enabled and gd valid - init serial console */
- opos6ul_setup_uart_debug();
- preloader_console_init();
-
/* DDR initialization */
spl_dram_init();
}
diff --git a/board/armadeus/opos6uldev/board.c b/board/armadeus/opos6uldev/board.c
index 646094aef4..a830dc326d 100644
--- a/board/armadeus/opos6uldev/board.c
+++ b/board/armadeus/opos6uldev/board.c
@@ -1,12 +1,11 @@
/*
- * Copyright (C) 2017 Armadeus Systems
+ * Copyright (C) 2018 Armadeus Systems
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/arch/clock.h>
#include <asm/arch/mx6-pins.h>
-#include <asm/arch/opos6ul.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/mach-imx/iomux-v3.h>
@@ -106,20 +105,3 @@ int opos6ul_board_late_init(void)
return 0;
}
-
-#ifdef CONFIG_SPL_BUILD
-#define UART_PAD_CTRL ( \
- PAD_CTL_HYS | PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
- PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST \
-)
-
-static iomux_v3_cfg_t const uart1_pads[] = {
- MX6_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
- MX6_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-void opos6ul_setup_uart_debug(void)
-{
- imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
-}
-#endif /* CONFIG_SPL_BUILD */
diff --git a/configs/opos6uldev_defconfig b/configs/opos6uldev_defconfig
index cff15a95cf..e3c056b9c9 100644
--- a/configs/opos6uldev_defconfig
+++ b/configs/opos6uldev_defconfig
@@ -1,8 +1,10 @@
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_SPL_GPIO_SUPPORT=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_TARGET_OPOS6ULDEV=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
@@ -11,6 +13,8 @@ CONFIG_SPL_WATCHDOG_SUPPORT=y
CONFIG_SPL=y
# CONFIG_CMD_BMODE is not set
CONFIG_DEFAULT_DEVICE_TREE="imx6ul-opos6uldev"
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x400
CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttymxc0,115200"
@@ -19,6 +23,7 @@ CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_DEFAULT_FDT_FILE="imx6ul-opos6uldev.dtb"
CONFIG_VERSION_VARIABLE=y
+CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_HUSH_PARSER=y
diff --git a/include/configs/opos6uldev.h b/include/configs/opos6uldev.h
index 24e1f80474..9e853f3d84 100644
--- a/include/configs/opos6uldev.h
+++ b/include/configs/opos6uldev.h
@@ -15,11 +15,7 @@
#include "imx6_spl.h"
#ifdef CONFIG_SPL_BUILD
-#undef CONFIG_DM_GPIO
-#undef CONFIG_DM_MMC
-#undef CONFIG_BLK
-
-#define CONFIG_MXC_UART_BASE UART1_BASE
+#undef CONFIG_DM_REGULATOR
#endif
#endif
@@ -40,7 +36,6 @@
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* MMC */
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SUPPORT_EMMC_BOOT
/* USB */
@@ -61,6 +56,7 @@
#endif
/* LCD */
+#ifndef CONFIG_SPL_BUILD
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_LOGO
#define CONFIG_SPLASH_SCREEN
@@ -72,6 +68,7 @@
#define CONFIG_VIDEO_MXS
#define MXS_LCDIF_BASE MX6UL_LCDIF1_BASE_ADDR
#endif
+#endif
/* Environment is stored in the eMMC boot partition */
#define CONFIG_SYS_MMC_ENV_DEV 0
--
2.16.1
More information about the U-Boot
mailing list