[U-Boot] [RFC PATCH] net: phy: Don't limit phy addresses by default
Neil Armstrong
narmstrong at baylibre.com
Mon Apr 9 08:01:42 UTC 2018
On 30/03/2018 18:52, Joe Hershberger wrote:
> Some boards expect to find more than one phy while other boards are old
> and need to be limited to a specific phy address. Only limit the phy
> address for boards that opt in.
>
> Signed-off-by: Joe Hershberger <joe.hershberger at ni.com>
>
> ---
>
> configs/am335x_baltos_defconfig | 1 +
> configs/am335x_shc_defconfig | 1 +
> configs/am335x_shc_ict_defconfig | 1 +
> configs/am335x_shc_netboot_defconfig | 1 +
> configs/am335x_shc_prompt_defconfig | 1 +
> configs/am335x_shc_sdboot_defconfig | 1 +
> configs/am335x_shc_sdboot_prompt_defconfig | 1 +
> configs/devkit3250_defconfig | 1 +
> configs/ds414_defconfig | 1 +
> configs/khadas-vim_defconfig | 1 +
> configs/libretech-cc_defconfig | 1 +
> configs/p212_defconfig | 1 +
> configs/pepper_defconfig | 1 +
> configs/work_92105_defconfig | 1 +
> configs/x600_defconfig | 1 +
> drivers/net/phy/Kconfig | 8 ++++++++
> 16 files changed, 23 insertions(+)
>
> diff --git a/configs/am335x_baltos_defconfig b/configs/am335x_baltos_defconfig
> index ab7d96d..ed7d3a7 100644
> --- a/configs/am335x_baltos_defconfig
> +++ b/configs/am335x_baltos_defconfig
> @@ -42,6 +42,7 @@ CONFIG_BOOTCOUNT_LIMIT=y
> CONFIG_SYS_OMAP24_I2C_SPEED=1000
> CONFIG_MMC_OMAP_HS=y
> CONFIG_NAND=y
> +CONFIG_PHY_ADDR_ENABLE=y
> CONFIG_PHYLIB=y
> CONFIG_SYS_NS16550=y
> CONFIG_OMAP3_SPI=y
> diff --git a/configs/am335x_shc_defconfig b/configs/am335x_shc_defconfig
> index fb714da..ade16b9 100644
> --- a/configs/am335x_shc_defconfig
> +++ b/configs/am335x_shc_defconfig
> @@ -35,6 +35,7 @@ CONFIG_CMD_MMC=y
> # CONFIG_SPL_ISO_PARTITION is not set
> CONFIG_ENV_IS_IN_MMC=y
> CONFIG_MMC_OMAP_HS=y
> +CONFIG_PHY_ADDR_ENABLE=y
> CONFIG_PHYLIB=y
> CONFIG_SYS_NS16550=y
> CONFIG_OMAP3_SPI=y
> diff --git a/configs/am335x_shc_ict_defconfig b/configs/am335x_shc_ict_defconfig
> index 2568e3d..ac19a74 100644
> --- a/configs/am335x_shc_ict_defconfig
> +++ b/configs/am335x_shc_ict_defconfig
> @@ -36,6 +36,7 @@ CONFIG_CMD_MMC=y
> # CONFIG_SPL_ISO_PARTITION is not set
> CONFIG_ENV_IS_IN_MMC=y
> CONFIG_MMC_OMAP_HS=y
> +CONFIG_PHY_ADDR_ENABLE=y
> CONFIG_PHYLIB=y
> CONFIG_SYS_NS16550=y
> CONFIG_OMAP3_SPI=y
> diff --git a/configs/am335x_shc_netboot_defconfig b/configs/am335x_shc_netboot_defconfig
> index 16071fb..31f1847 100644
> --- a/configs/am335x_shc_netboot_defconfig
> +++ b/configs/am335x_shc_netboot_defconfig
> @@ -37,6 +37,7 @@ CONFIG_CMD_MMC=y
> # CONFIG_SPL_ISO_PARTITION is not set
> CONFIG_ENV_IS_IN_MMC=y
> CONFIG_MMC_OMAP_HS=y
> +CONFIG_PHY_ADDR_ENABLE=y
> CONFIG_PHYLIB=y
> CONFIG_SYS_NS16550=y
> CONFIG_OMAP3_SPI=y
> diff --git a/configs/am335x_shc_prompt_defconfig b/configs/am335x_shc_prompt_defconfig
> index bbad6dd..803304e 100644
> --- a/configs/am335x_shc_prompt_defconfig
> +++ b/configs/am335x_shc_prompt_defconfig
> @@ -34,6 +34,7 @@ CONFIG_CMD_MMC=y
> # CONFIG_SPL_ISO_PARTITION is not set
> CONFIG_ENV_IS_IN_MMC=y
> CONFIG_MMC_OMAP_HS=y
> +CONFIG_PHY_ADDR_ENABLE=y
> CONFIG_PHYLIB=y
> CONFIG_SYS_NS16550=y
> CONFIG_OMAP3_SPI=y
> diff --git a/configs/am335x_shc_sdboot_defconfig b/configs/am335x_shc_sdboot_defconfig
> index 82a61a3..2d4f4d1 100644
> --- a/configs/am335x_shc_sdboot_defconfig
> +++ b/configs/am335x_shc_sdboot_defconfig
> @@ -36,6 +36,7 @@ CONFIG_CMD_MMC=y
> # CONFIG_SPL_ISO_PARTITION is not set
> CONFIG_ENV_IS_IN_MMC=y
> CONFIG_MMC_OMAP_HS=y
> +CONFIG_PHY_ADDR_ENABLE=y
> CONFIG_PHYLIB=y
> CONFIG_SYS_NS16550=y
> CONFIG_OMAP3_SPI=y
> diff --git a/configs/am335x_shc_sdboot_prompt_defconfig b/configs/am335x_shc_sdboot_prompt_defconfig
> index 82a61a3..2d4f4d1 100644
> --- a/configs/am335x_shc_sdboot_prompt_defconfig
> +++ b/configs/am335x_shc_sdboot_prompt_defconfig
> @@ -36,6 +36,7 @@ CONFIG_CMD_MMC=y
> # CONFIG_SPL_ISO_PARTITION is not set
> CONFIG_ENV_IS_IN_MMC=y
> CONFIG_MMC_OMAP_HS=y
> +CONFIG_PHY_ADDR_ENABLE=y
> CONFIG_PHYLIB=y
> CONFIG_SYS_NS16550=y
> CONFIG_OMAP3_SPI=y
> diff --git a/configs/devkit3250_defconfig b/configs/devkit3250_defconfig
> index e1a9b49..b69808c 100644
> --- a/configs/devkit3250_defconfig
> +++ b/configs/devkit3250_defconfig
> @@ -36,6 +36,7 @@ CONFIG_MTD_NOR_FLASH=y
> CONFIG_NAND=y
> CONFIG_SPL_NAND_SIMPLE=y
> CONFIG_PHYLIB=y
> +CONFIG_PHY_ADDR_ENABLE=y
> CONFIG_PHY_ADDR=31
> CONFIG_DM_SERIAL=y
> CONFIG_SYS_NS16550=y
> diff --git a/configs/ds414_defconfig b/configs/ds414_defconfig
> index 5d1d6ab..d68e64e 100644
> --- a/configs/ds414_defconfig
> +++ b/configs/ds414_defconfig
> @@ -39,6 +39,7 @@ CONFIG_SPL_OF_TRANSLATE=y
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_BAR=y
> CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_PHY_ADDR_ENABLE=y
> CONFIG_PHY_GIGE=y
> CONFIG_MVNETA=y
> CONFIG_PCI=y
> diff --git a/configs/khadas-vim_defconfig b/configs/khadas-vim_defconfig
> index f4674ef..0bfb594 100644
> --- a/configs/khadas-vim_defconfig
> +++ b/configs/khadas-vim_defconfig
> @@ -20,6 +20,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_DM_GPIO=y
> CONFIG_DM_MMC=y
> CONFIG_MMC_MESON_GX=y
> +CONFIG_PHY_ADDR_ENABLE=y
> CONFIG_PHY_ADDR=8
> CONFIG_PHY_MESON_GXL=y
> CONFIG_DM_ETH=y
> diff --git a/configs/libretech-cc_defconfig b/configs/libretech-cc_defconfig
> index 18ddb45..931496c 100644
> --- a/configs/libretech-cc_defconfig
> +++ b/configs/libretech-cc_defconfig
> @@ -20,6 +20,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_DM_GPIO=y
> CONFIG_DM_MMC=y
> CONFIG_MMC_MESON_GX=y
> +CONFIG_PHY_ADDR_ENABLE=y
> CONFIG_PHY_ADDR=8
> CONFIG_PHY_MESON_GXL=y
> CONFIG_DM_ETH=y
> diff --git a/configs/p212_defconfig b/configs/p212_defconfig
> index b6923f3..44221fc 100644
> --- a/configs/p212_defconfig
> +++ b/configs/p212_defconfig
> @@ -20,6 +20,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
> CONFIG_DM_GPIO=y
> CONFIG_DM_MMC=y
> CONFIG_MMC_MESON_GX=y
> +CONFIG_PHY_ADDR_ENABLE=y
> CONFIG_PHY_ADDR=8
> CONFIG_PHY_MESON_GXL=y
> CONFIG_DM_ETH=y
> diff --git a/configs/pepper_defconfig b/configs/pepper_defconfig
> index a802e57..2752436 100644
> --- a/configs/pepper_defconfig
> +++ b/configs/pepper_defconfig
> @@ -30,6 +30,7 @@ CONFIG_CMD_SPI=y
> CONFIG_CMD_EXT4_WRITE=y
> CONFIG_MMC_OMAP_HS=y
> CONFIG_PHYLIB=y
> +CONFIG_PHY_ADDR_ENABLE=y
> CONFIG_PHY_MICREL=y
> CONFIG_PHY_MICREL_KSZ90X1=y
> CONFIG_NETDEVICES=y
> diff --git a/configs/work_92105_defconfig b/configs/work_92105_defconfig
> index 2451b56..76418f0 100644
> --- a/configs/work_92105_defconfig
> +++ b/configs/work_92105_defconfig
> @@ -35,6 +35,7 @@ CONFIG_SPL_DM=y
> CONFIG_DM_GPIO=y
> # CONFIG_MMC is not set
> CONFIG_PHYLIB=y
> +CONFIG_PHY_ADDR_ENABLE=y
> CONFIG_DM_SERIAL=y
> CONFIG_SYS_NS16550=y
> CONFIG_LPC32XX_SSP=y
> diff --git a/configs/x600_defconfig b/configs/x600_defconfig
> index 445759e..10d596b 100644
> --- a/configs/x600_defconfig
> +++ b/configs/x600_defconfig
> @@ -44,6 +44,7 @@ CONFIG_FPGA_SPARTAN3=y
> CONFIG_SYS_I2C_DW=y
> # CONFIG_MMC is not set
> CONFIG_MTD_NOR_FLASH=y
> +CONFIG_PHY_ADDR_ENABLE=y
> CONFIG_PHY_MICREL=y
> CONFIG_PHY_MICREL_KSZ90X1=y
> CONFIG_NETDEVICES=y
> diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
> index 179e041..f5821df 100644
> --- a/drivers/net/phy/Kconfig
> +++ b/drivers/net/phy/Kconfig
> @@ -13,12 +13,20 @@ menuconfig PHYLIB
>
> if PHYLIB
>
> +config PHY_ADDR_ENABLE
> + bool "Limit phy address"
> + default y if ARCH_SUNXI
> + help
> + Select this if you want to control which phy address is used
> +
> +if PHY_ADDR_ENABLE
> config PHY_ADDR
> int "PHY address"
> default 1 if ARCH_SUNXI
> default 0
> help
> The address of PHY on MII bus. Usually in range of 0 to 31.
> +endif
>
> config B53_SWITCH
> bool "Broadcom BCM53xx (RoboSwitch) Ethernet switch PHY support."
>
Hi,
For p212, libretech-cc and khadas-vim,
Acked-by: Neil Armstrong <narmstrong at baylibre.com>
Neil
More information about the U-Boot
mailing list