[U-Boot] [PATCH] imx: mx7: snvs: Add an SNVS init routine

Bryan O'Donoghue bryan.odonoghue at linaro.org
Thu Apr 5 18:46:06 UTC 2018


Working with HAB on the i.MX7 we've encountered a case where a board that
successfully authenticates u-boot when booting Linux via OPTEE subsequently
fails to properly bring up the RTC.

The RTC registers live in the low-power block of the Secure Non-Volatile
Storage (SNVS) block.

The root cause of the error has been traced to the HAB handing off the
SNVS-RTC in a state where HPCOMR::NPSWA_EN = 0 in other words where the
Non-Privileged Software Access Enable bit is zero. In ordinary
circumstances this is OK since we typically do not run in TZ mode, however
when we boot via HAB and enablng TrustZone, it is required to set
HPCOMR::NPSWA_EN = 1 in order for the upstream Linux driver to have
sufficient permissions to manipulate the SNVS-LP block.

On our reference board it is the difference between Linux doing this:

root at imx7s-warp-mbl:~# dmesg | grep rtc
snvs_rtc_enable read 0x00000000 from SNVS_LPLR @ 0x00000034
snvs_rtc_enable read 0x00000021 from SNVS_LPCR @ 0x00000038
snvs_rtc_enable read 0x00000000 from SNVS_HPLR @ 0x00000000
snvs_rtc_enable read 0x80002100 from SNVS_HPCOMR @ 0x00000004
snvs_rtc 30370000.snvs:snvs-rtc-lp: rtc core: registered
         30370000.snvs:snvs-rtc-lp as rtc0
snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to2018-04-01 00:51:04 UTC (1522543864)

and doing this:

root at imx7s-warp-mbl:~# dmesg | grep rtc
snvs_rtc_enable read 0x00000000 from SNVS_LPLR @ 0x00000034
snvs_rtc_enable read 0x00000020 from SNVS_LPCR @ 0x00000038
snvs_rtc_enable read 0x00000001 from SNVS_HPLR @ 0x00000000
snvs_rtc_enable read 0x00002020 from SNVS_HPCOMR @ 0x00000004
snvs_rtc 30370000.snvs:snvs-rtc-lp: failed to enable rtc -110
snvs_rtc: probe of 30370000.snvs:snvs-rtc-lp failed with error -110
hctosys: unable to open rtc device (rtc0)

Note bit 1 of LPCR is not set in the second case and is set in the first
case and that bit 31 of HPCOMR is set in the second case but not in the
first.

Setting NPSWA_EN in HPCOMR allows us to boot through enabling TrustZone
and continue onto the kernel. The kernel then has the necessary permissions
to set LPCR::SRTC_ENV (RTC enable in the LP command register) whereas in
contrast - in the failing case the non-privileged kernel cannot do so.

This patch adds a simple init_snvs() call which sets the permission-bit
called from soc.c for the i.MX7. It may be possible, safe and desirable to
perform this on other i.MX processors but for now this is only tested on
i.MX7 as working.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>
---
 arch/arm/include/asm/mach-imx/sys_proto.h |  1 +
 arch/arm/mach-imx/mx7/Makefile            |  2 +-
 arch/arm/mach-imx/mx7/snvs.c              | 22 ++++++++++++++++++++++
 arch/arm/mach-imx/mx7/soc.c               |  2 ++
 4 files changed, 26 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/mach-imx/mx7/snvs.c

diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h
index 96795e1..aa51c0d 100644
--- a/arch/arm/include/asm/mach-imx/sys_proto.h
+++ b/arch/arm/include/asm/mach-imx/sys_proto.h
@@ -107,6 +107,7 @@ void set_chipselect_size(int const);
 
 void init_aips(void);
 void init_src(void);
+void init_snvs(void);
 void imx_wdog_disable_powerdown(void);
 
 int board_mmc_get_env_dev(int devno);
diff --git a/arch/arm/mach-imx/mx7/Makefile b/arch/arm/mach-imx/mx7/Makefile
index ce289c1..e6bef6a 100644
--- a/arch/arm/mach-imx/mx7/Makefile
+++ b/arch/arm/mach-imx/mx7/Makefile
@@ -5,7 +5,7 @@
 #
 #
 
-obj-y	:= soc.o clock.o clock_slice.o ddr.o
+obj-y	:= soc.o clock.o clock_slice.o ddr.o snvs.o
 
 ifdef CONFIG_ARMV7_PSCI
 obj-y  += psci-mx7.o psci.o
diff --git a/arch/arm/mach-imx/mx7/snvs.c b/arch/arm/mach-imx/mx7/snvs.c
new file mode 100644
index 0000000..7e649b8
--- /dev/null
+++ b/arch/arm/mach-imx/mx7/snvs.c
@@ -0,0 +1,22 @@
+/*
+ * Copyright 2018 Linaro
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <linux/bitops.h>
+
+#define SNVS_HPCOMR		0x04
+#define SNVS_HPCOMR_NPSWA_EN	BIT(31)
+
+void init_snvs(void)
+{
+	u32 val;
+
+	/* Ensure SNVS HPCOMR sets NPSWA_EN to allow unpriv access to SNVS LP */
+	val = readl(SNVS_BASE_ADDR + SNVS_HPCOMR);
+	val |= SNVS_HPCOMR_NPSWA_EN;
+	writel(val, SNVS_BASE_ADDR + SNVS_HPCOMR);
+}
diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c
index fb92a26..3ceeeff 100644
--- a/arch/arm/mach-imx/mx7/soc.c
+++ b/arch/arm/mach-imx/mx7/soc.c
@@ -180,6 +180,8 @@ int arch_cpu_init(void)
 	isolate_resource();
 #endif
 
+	init_snvs();
+
 	return 0;
 }
 
-- 
2.7.4



More information about the U-Boot mailing list