[U-Boot] [PATCH] arm64: mvebu: a8k: Add distro boot support

[Joe Hershberger]

On Fri, Mar 30, 2018 at 9:10 AM, Stefan Roese <stefan.roese at gmail.com> wrote:
> On 17.03.2018 09:34, Mark Kettenis wrote:
>>
>> The various load address values are taken from the a37xx configuration
>> and match the dowstream 'u-boot-2017.03-armada-17.10' release where
>> appropriate.
>>
>> Signed-off-by: Mark Kettenis <kettenis at openbsd.org>
>> ---
>>   include/configs/mvebu_armada-8k.h | 19 +++++++++++++++++++
>>   1 file changed, 19 insertions(+)
>>
>> diff --git a/include/configs/mvebu_armada-8k.h
>> b/include/configs/mvebu_armada-8k.h
>> index f288cf5b17..1cd0fa93d3 100644
>> --- a/include/configs/mvebu_armada-8k.h
>> +++ b/include/configs/mvebu_armada-8k.h
>> @@ -106,4 +106,23 @@
>>   #define CONFIG_E1000
>>   #endif
>>   +#define BOOT_TARGET_DEVICES(func) \
>> +       func(MMC, mmc, 1) \
>> +       func(MMC, mmc, 0) \
>> +       func(USB, usb, 0) \
>> +       func(SCSI, scsi, 0) \
>> +       func(PXE, pxe, na) \
>> +       func(DHCP, dhcp, na)

Make sure you only add DHCP if CONFIG_CMD_DHCP is set and only add PXE
if CONFIG_CMD_DHCP and CONFIG_CMD_PXE are set.

>> +
>> +#include <config_distro_bootcmd.h>
>> +
>> +#define CONFIG_EXTRA_ENV_SETTINGS      \
>> +       "scriptaddr=0x4d00000\0"        \
>> +       "pxefile_addr_r=0x4e00000\0"    \
>> +       "fdt_addr_r=0x4f00000\0"        \
>> +       "kernel_addr_r=0x5000000\0"     \
>> +       "ramdisk_addr_r=0x8000000\0"    \
>> +       "fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
>> +       BOOTENV
>> +
>>   #endif /* _CONFIG_MVEBU_ARMADA_8K_H */
>>
>
> Applied to u-boot-marvell/master.
>
> Thanks,
> Stefan
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot