[U-Boot] [PATCH] mx7dsabresd: Remove the mx7dsabresd_secure_defconfig target

[Bryan O'Donoghue]

On 19/04/18 20:34, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam at nxp.com>
> 
> mx7dsabresd_secure_defconfig was introduced to allow booting NXP kernel
> that has CAAM support and needs to boot in secure mode.
> 
> Instead of keeping two different config targets for the same board,
> remove mx7dsabresd_secure_defconfig and select
> CONFIG_ARMV7_BOOT_SEC_DEFAULT inside mx7dsabresd_defconfig so that
> this target could be used to boot both mainline and the vendor kernel.
> 
> This makes maintenance task easier and avoid potentially confusion
> for the end user.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>

Acked-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>