[U-Boot] [PATCH 1/2] ARM: rmobile: Ignore U-Boot env when started via JTAG on Stout

[Marek Vasut]

When U-Boot is started via JTAG, ignore the installed environment
as it may interfere with the recovery of the board.

Signed-off-by: Marek Vasut <marek.vasut+renesas at gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu at nigauri.org>
---
 board/renesas/stout/stout.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/board/renesas/stout/stout.c b/board/renesas/stout/stout.c
index d7e81292a0..192ee66a38 100644
--- a/board/renesas/stout/stout.c
+++ b/board/renesas/stout/stout.c
@@ -128,3 +128,18 @@ int board_phy_config(struct phy_device *phydev)
 const struct rmobile_sysinfo sysinfo = {
 	CONFIG_ARCH_RMOBILE_BOARD_STRING
 };
+
+enum env_location env_get_location(enum env_operation op, int prio)
+{
+	const u32 load_magic = 0xb33fc0de;
+
+	/* Block environment access if loaded using JTAG */
+	if ((readl(CONFIG_SPL_TEXT_BASE + 0x24) == load_magic) &&
+	    (op != ENVOP_INIT))
+		return ENVL_UNKNOWN;
+
+	if (prio)
+		return ENVL_UNKNOWN;
+
+	return ENVL_SPI_FLASH;
+}
-- 
2.16.2