[U-Boot] [PATCH V4 1/2] imx6: Convert sabrelite and nitrogen6x boards to distro boot support
Gary Bisson
gary.bisson at boundarydevices.com
Mon Apr 16 07:45:43 UTC 2018
Hi Guillaume,
On Thu, Apr 12, 2018 at 03:28:21PM +0200, Guillaume GARDET wrote:
> Boot tested on sabrelite board.
>
> Signed-off-by: Guillaume GARDET <guillaume.gardet at free.fr>
> Cc: Troy Kisky <troy.kisky at boundarydevices.com>
> Cc: Stefano Babic <sbabic at denx.de>
> Cc: Fabio Estevam <fabio.estevam at nxp.com>
> Cc: Gary Bisson <gary.bisson at boundarydevices.com>
>
> ---
> include/configs/nitrogen6x.h | 180 +++++++++++++------------------------------
> 1 file changed, 54 insertions(+), 126 deletions(-)
>
> diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
> index 7d2cf0bd8c..f6dce6c069 100644
> --- a/include/configs/nitrogen6x.h
> +++ b/include/configs/nitrogen6x.h
> @@ -101,140 +101,68 @@
> #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
> #define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
Many of the macros above this line are obsolete with that patch, please
remove.
@@ -80,27 +80,6 @@
#define CONFIG_PREBOOT ""
-#ifdef CONFIG_CMD_SATA
-#define CONFIG_DRIVE_SATA "sata "
-#else
-#define CONFIG_DRIVE_SATA
-#endif
-
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_DRIVE_MMC "mmc "
-#else
-#define CONFIG_DRIVE_MMC
-#endif
-
-#ifdef CONFIG_USB_STORAGE
-#define CONFIG_DRIVE_USB "usb "
-#else
-#define CONFIG_DRIVE_USB
-#endif
-
-#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
-#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
-
#ifdef CONFIG_CMD_MMC
> +#ifdef CONFIG_CMD_MMC
> +#define DISTRO_BOOT_DEV_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
> +#else
> +#define DISTRO_BOOT_DEV_MMC(func)
> +#endif
> +
> +#ifdef CONFIG_CMD_SATA
> +#define DISTRO_BOOT_DEV_SATA(func) func(SATA, sata, 0)
> +#else
> +#define DISTRO_BOOT_DEV_SATA(func)
> +#endif
> +
> +#ifdef CONFIG_USB_STORAGE
> +#define DISTRO_BOOT_DEV_USB(func) func(USB, usb, 0)
> +#else
> +#define DISTRO_BOOT_DEV_USB(func)
> +#endif
> +
> +#ifdef CONFIG_CMD_PXE
> +#define DISTRO_BOOT_DEV_PXE(func) func(PXE, pxe, na)
> +#else
> +#define DISTRO_BOOT_DEV_PXE(func)
> +#endif
> +
> +#ifdef CONFIG_CMD_DHCP
> +#define DISTRO_BOOT_DEV_DHCP(func) func(DHCP, dhcp, na)
> +#else
> +#define DISTRO_BOOT_DEV_DHCP(func)
> +#endif
> +
> +
> #if defined(CONFIG_SABRELITE)
> +#define FDTFILE "fdtfile=imx6q-sabrelite.dtb\0"
> +#else
> +/* FIXME: nitrogen6x covers multiple configs. Define fdtfile for each supported config. */
> +#define FDTFILE
> +#endif
> +
> +#define BOOT_TARGET_DEVICES(func) \
> + DISTRO_BOOT_DEV_MMC(func) \
> + DISTRO_BOOT_DEV_SATA(func) \
> + DISTRO_BOOT_DEV_USB(func) \
> + DISTRO_BOOT_DEV_PXE(func) \
> + DISTRO_BOOT_DEV_DHCP(func)
> +
> +#include <config_distro_bootcmd.h>
> +
> #define CONFIG_EXTRA_ENV_SETTINGS \
> - "script=boot.scr\0" \
> - "uimage=uImage\0" \
> "console=ttymxc1\0" \
> "fdt_high=0xffffffff\0" \
> "initrd_high=0xffffffff\0" \
> - "fdt_file=imx6q-sabrelite.dtb\0" \
> - "fdt_addr=0x18000000\0" \
> - "boot_fdt=try\0" \
> + "fdt_addr_r=0x18000000\0" \
> + FDTFILE \
> + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
> + "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
> + "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
> + "ramdisk_addr_r=0x13000000\0" \
> + "ramdiskaddr=0x13000000\0" \
> "ip_dyn=yes\0" \
> "usb_pgood_delay=2000\0" \
> - "mmcdevs=0 1\0" \
> - "mmcpart=1\0" \
> - "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
> - "mmcargs=setenv bootargs console=${console},${baudrate} " \
> - "root=${mmcroot}\0" \
> - "loadbootscript=" \
> - "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
> - "bootscript=echo Running bootscript from mmc ...; " \
> - "source\0" \
> - "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
> - "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
> - "mmcboot=echo Booting from mmc ...; " \
> - "run mmcargs; " \
> - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
> - "if run loadfdt; then " \
> - "bootm ${loadaddr} - ${fdt_addr}; " \
> - "else " \
> - "if test ${boot_fdt} = try; then " \
> - "bootm; " \
> - "else " \
> - "echo WARN: Cannot load the DT; " \
> - "fi; " \
> - "fi; " \
> - "else " \
> - "bootm; " \
> - "fi;\0" \
> - "netargs=setenv bootargs console=${console},${baudrate} " \
> - "root=/dev/nfs " \
> - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
> - "netboot=echo Booting from net ...; " \
> - "run netargs; " \
> - "if test ${ip_dyn} = yes; then " \
> - "setenv get_cmd dhcp; " \
> - "else " \
> - "setenv get_cmd tftp; " \
> - "fi; " \
> - "${get_cmd} ${uimage}; " \
> - "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
> - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
> - "bootm ${loadaddr} - ${fdt_addr}; " \
> - "else " \
> - "if test ${boot_fdt} = try; then " \
> - "bootm; " \
> - "else " \
> - "echo WARN: Cannot load the DT; " \
> - "fi; " \
> - "fi; " \
> - "else " \
> - "bootm; " \
> - "fi;\0"
> -
> -#define CONFIG_BOOTCOMMAND \
> - "for mmcdev in ${mmcdevs}; do " \
> - "mmc dev ${mmcdev}; " \
> - "if mmc rescan; then " \
> - "if run loadbootscript; then " \
> - "run bootscript; " \
> - "else " \
> - "if run loaduimage; then " \
> - "run mmcboot; " \
> - "fi; " \
> - "fi; " \
> - "fi; " \
> - "done; " \
> - "run netboot; "
> -#else
> -#define CONFIG_EXTRA_ENV_SETTINGS \
> - "bootdevs=" CONFIG_DRIVE_TYPES "\0" \
> - "umsdevs=" CONFIG_UMSDEVS "\0" \
> - "usb_pgood_delay=2000\0" \
> - "console=ttymxc1\0" \
> - "clearenv=if sf probe || sf probe || sf probe 1 ; then " \
> - "sf erase 0xc0000 0x2000 && " \
> - "echo restored environment to factory default ; fi\0" \
> - "bootcmd=for dtype in ${bootdevs}" \
> - "; do " \
> - "if itest.s \"xusb\" == \"x${dtype}\" ; then " \
> - "usb start ;" \
> - "fi; " \
> - "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
> - "load " \
> - "${dtype} ${disk}:1 " \
> - "10008000 " \
> - "/6x_bootscript" \
> - "&& source 10008000 ; " \
> - "done ; " \
> - "done; " \
> - "setenv stdout serial,vga ; " \
> - "echo ; echo 6x_bootscript not found ; " \
> - "echo ; echo serial console at 115200, 8N1 ; echo ; " \
> - "echo details at http://boundarydevices.com/6q_bootscript ; " \
> - "setenv stdout serial;" \
> - "setenv stdin serial,usbkbd;" \
> - "for dtype in ${umsdevs} ; do " \
> - "if itest.s sata == ${dtype}; then " \
> - "initcmd='sata init' ;" \
> - "else " \
> - "initcmd='mmc rescan' ;" \
> - "fi; " \
> - "for disk in 0 1 ; do " \
> - "if $initcmd && $dtype dev $disk ; then " \
> - "setenv stdout serial,vga; " \
> - "echo expose ${dtype} ${disk} " \
> - "over USB; " \
> - "ums 0 $dtype $disk ;" \
> - "fi; " \
> - " done; " \
> - "done ;" \
> - "setenv stdout serial,vga; " \
> - "echo no block devices found;" \
> - "\0" \
> - "initrd_high=0xffffffff\0" \
> - "upgradeu=for dtype in ${bootdevs}" \
> - "; do " \
> - "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
> - "load ${dtype} ${disk}:1 10008000 " \
> - "/6x_upgrade " \
> - "&& source 10008000 ; " \
> - "done ; " \
> - "done\0" \
> + BOOTENV
>
> -#endif
> /* Miscellaneous configurable options */
> #define CONFIG_SYS_MEMTEST_START 0x10000000
> #define CONFIG_SYS_MEMTEST_END 0x10010000
> --
> 2.13.6
Regards,
Gary
More information about the U-Boot
mailing list