[U-Boot] [PULL] Please pull u-boot-imx

[Stefano Babic]

Hi Tom,

please pull from u-.boot-imx, thanks !

The following changes since commit 5512f5ccf1dc5cec068f8efa1d8ce81f51a988d3:

  Merge git://git.denx.de/u-boot-video (2018-04-24 20:27:43 -0400)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 07a8f79ee850b1e59371519f179d32fea171bbec:

  ARM: mxs: support full SPL framework (2018-04-27 09:32:54 +0200)

----------------------------------------------------------------
Bryan O'Donoghue (20):
      tools/imximage: Fix fruity lack of 0x prefix in DCD Blocks
      imximage: Specify default IVT offset in IMX image
      warp7: hab: Add a CSF location definition
      warp7: hab: Set environment variable indicating HAB enable
      warp7: defconfig: Enable OPTEE for WaRP7
      warp7: Allocate specific region of memory to OPTEE
      warp7: Print out the OPTEE DRAM region
      warp7: Specify CONFIG_OPTEE_LOAD_ADDR
      warp7: defconfig: Enable CONFIG_SECURE_BOOT
      warp7: defconfig: Enable CONFIG_BOOTM_TEE
      warp7: Make CONFIG_SYS_FDT_ADDR a define
      warp7: Add Kconfig WARP7_ROOT_PART
      warp7: select uuid partition based on rootpart
      warp7: Define the name of a signed boot-script file
      warp7: add warp7_auth_or_fail
      warp7: hab: Set environment variable indicating IVT offset
      warp7: defconfig: Enable CMD_SETEXPR
      warp7: Add support for automated secure boot.scr verification
      warp7: secure_defconfig: Remove secure_defconfig
      warp7: defconfig: Fix CAAM on boot with tip-of-tree

Fabio Estevam (2):
      mx7dsabresd: Remove the mx7dsabresd_secure_defconfig target
      Revert "imximage: Remove failure when no IVT offset is found"

Lukasz Majewski (2):
      eth: dm: fec: Change FEC PHY mask setting from CONFIG_PHYLIB to
CONFIG_FEC_MXC_PHYADDR
      dts: dm: fec: imx53: Provide proper compatible string for imx53
fec driver

Mans Rullgard (5):
      ARM: mxs: make lowlevel_init() weak
      ARM: arm926ejs: fix lowlevel_init call
      ARM: spl: include arm/thumb glue sections
      ARM: mxs: move spl data
      ARM: mxs: support full SPL framework

Mark Jonas (1):
      arm,imx6: fix PAD_CTL_SPEED_LOW constant

Pierre-Jean TEXIER (2):
      warp7: include/configs: use generic fs commands in
CONFIG_EXTRA_ENV_SETTINGS
      warp7: configs: enable CONFIG_CMD_FS_GENERIC

Sébastien Szymanski (2):
      imx6ul: opos6ul: add SPL_DM support
      imx6ul: opos6ul: in Serial Downloader boot mode use ymodem

 arch/arm/Kconfig                                 |  2 +-
 arch/arm/cpu/arm926ejs/mxs/Makefile              |  4 ++--
 arch/arm/cpu/arm926ejs/mxs/mxs.c                 |  8 +++-----
 arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg |  5 +++++
 arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx28.cfg |  6 ++++++
 arch/arm/cpu/arm926ejs/mxs/spl_boot.c            |  5 +++--
 arch/arm/cpu/arm926ejs/start.S                   |  4 ++--
 arch/arm/cpu/u-boot-spl.lds                      |  1 +
 arch/arm/dts/imx6ul-opos6ul.dtsi                 |  4 +++-
 arch/arm/dts/imx6ul-opos6uldev.dts               |  2 ++
 arch/arm/dts/imx6ul.dtsi                         |  1 +
 arch/arm/include/asm/arch-mx6/opos6ul.h          |  4 ----
 arch/arm/include/asm/arch-mxs/sys_proto.h        |  2 ++
 arch/arm/include/asm/mach-imx/iomux-v3.h         |  6 +++---
 arch/arm/mach-imx/mx6/Kconfig                    |  4 ++++
 arch/arm/mach-imx/mx6/opos6ul.c                  | 54
+++++++++++++-----------------------------------------
 board/armadeus/opos6uldev/board.c                | 20 +-------------------
 board/freescale/mx7dsabresd/MAINTAINERS          |  1 -
 board/warp7/Kconfig                              | 14 ++++++++++++++
 board/warp7/MAINTAINERS                          |  1 -
 board/warp7/imximage.cfg                         |  4 ++++
 board/warp7/warp7.c                              | 23
+++++++++++++++++++++++
 configs/mx7dsabresd_defconfig                    |  1 +
 configs/mx7dsabresd_secure_defconfig             | 78
------------------------------------------------------------------------------
 configs/opos6uldev_defconfig                     |  5 +++++
 configs/warp7_defconfig                          |  8 +++++++-
 configs/warp7_secure_defconfig                   | 43
-------------------------------------------
 drivers/net/fec_mxc.c                            |  3 ++-
 include/configs/mxs.h                            |  2 ++
 include/configs/opos6uldev.h                     |  9 +++------
 include/configs/warp7.h                          | 28
+++++++++++++++++++++++-----
 include/imximage.h                               |  3 +++
 tools/imximage.c                                 |  7 ++++++-
 33 files changed, 145 insertions(+), 217 deletions(-)
 create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx23.cfg
 create mode 100644 arch/arm/cpu/arm926ejs/mxs/mxsimage-spl.mx28.cfg
 delete mode 100644 configs/mx7dsabresd_secure_defconfig
 delete mode 100644 configs/warp7_secure_defconfig


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================