[U-Boot] [PATCH v1 08/16] arm: socfpga: stratix10: Add mailbox support for Stratix10 SoC
Marek Vasut
marex at denx.de
Thu Apr 19 02:53:07 UTC 2018
On 04/19/2018 11:50 AM, Ley Foon Tan wrote:
> Add mailbox support for Stratix SoC
>
> Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>
> Signed-off-by: Chin Liang See <chin.liang.see at intel.com>
> ---
> arch/arm/mach-socfpga/Makefile | 1 +
> arch/arm/mach-socfpga/include/mach/mailbox_s10.h | 155 +++++++++
> arch/arm/mach-socfpga/mailbox_s10.c | 378 ++++++++++++++++++++++
> 3 files changed, 534 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/mach-socfpga/include/mach/mailbox_s10.h
> create mode 100644 arch/arm/mach-socfpga/mailbox_s10.c
>
> diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
> index b253914..43e18d2 100644
> --- a/arch/arm/mach-socfpga/Makefile
> +++ b/arch/arm/mach-socfpga/Makefile
> @@ -32,6 +32,7 @@ endif
>
> ifdef CONFIG_TARGET_SOCFPGA_STRATIX10
> obj-y += clock_manager_s10.o
> +obj-y += mailbox_s10.o
> obj-y += misc_s10.o
> obj-y += reset_manager_s10.o
> obj-y += system_manager_s10.o
> diff --git a/arch/arm/mach-socfpga/include/mach/mailbox_s10.h b/arch/arm/mach-socfpga/include/mach/mailbox_s10.h
> new file mode 100644
> index 0000000..85e7f84
> --- /dev/null
> +++ b/arch/arm/mach-socfpga/include/mach/mailbox_s10.h
> @@ -0,0 +1,155 @@
> +/* SPDX-License-Identifier: GPL-2.0
> + *
> + * Copyright (C) 2017-2018 Intel Corporation <www.intel.com>
> + *
> + */
> +
> +#ifndef _MAILBOX_S10_H_
> +#define _MAILBOX_S10_H_
> +
> +/* user define Uboot ID */
> +#define MBOX_CLIENT_ID_UBOOT 0xB
> +#define MBOX_ID_UBOOT 0x1
> +
> +#define MBOX_CMD_DIRECT 0
> +#define MBOX_CMD_INDIRECT 1
> +
> +#define MBOX_MAX_CMD_INDEX 2047
> +#define MBOX_CMD_BUFFER_SIZE 32
> +#define MBOX_RESP_BUFFER_SIZE 16
> +
> +#define MBOX_HDR_CMD_LSB 0
> +#define MBOX_HDR_CMD_MSK (BIT(11) - 1)
> +#define MBOX_HDR_I_LSB 11
> +#define MBOX_HDR_I_MSK BIT(11)
> +#define MBOX_HDR_LEN_LSB 12
> +#define MBOX_HDR_LEN_MSK 0x007FF000
> +#define MBOX_HDR_ID_LSB 24
> +#define MBOX_HDR_ID_MSK 0x0F000000
> +#define MBOX_HDR_CLIENT_LSB 28
> +#define MBOX_HDR_CLIENT_MSK 0xF0000000
> +
> +/* Interrupt flags */
> +#define MBOX_FLAGS_INT_COE BIT(0) /* COUT update interrupt enable */
> +#define MBOX_FLAGS_INT_RIE BIT(1) /* RIN update interrupt enable */
> +#define MBOX_FLAGS_INT_UAE BIT(8) /* Urgent ACK interrupt enable */
> +#define MBOX_ALL_INTRS (MBOX_FLAGS_INT_COE | \
> + MBOX_FLAGS_INT_RIE | \
> + MBOX_FLAGS_INT_UAE)
> +
> +/* Status */
> +#define MBOX_STATUS_UA_MSK BIT(8)
> +
> +#define MBOX_CMD_HEADER(client, id, len, indirect, cmd) \
> + ((((cmd) << MBOX_HDR_CMD_LSB) & MBOX_HDR_CMD_MSK) | \
> + (((indirect) << MBOX_HDR_I_LSB) & MBOX_HDR_I_MSK) | \
> + (((len) << MBOX_HDR_LEN_LSB) & MBOX_HDR_LEN_MSK) | \
> + (((id) << MBOX_HDR_ID_LSB) & MBOX_HDR_ID_MSK) | \
> + (((client) << MBOX_HDR_CLIENT_LSB) & MBOX_HDR_CLIENT_MSK))
> +
> +#define MBOX_RESP_ERR_GET(resp) \
> + (((resp) & MBOX_HDR_CMD_MSK) >> MBOX_HDR_CMD_LSB)
> +#define MBOX_RESP_LEN_GET(resp) \
> + (((resp) & MBOX_HDR_LEN_MSK) >> MBOX_HDR_LEN_LSB)
> +#define MBOX_RESP_ID_GET(resp) \
> + (((resp) & MBOX_HDR_ID_MSK) >> MBOX_HDR_ID_LSB)
> +#define MBOX_RESP_CLIENT_GET(resp) \
> + (((resp) & MBOX_HDR_CLIENT_MSK) >> MBOX_HDR_CLIENT_LSB)
> +
> +/* Response error list */
> +enum ALT_SDM_MBOX_RESP_CODE {
> + /* CMD completed successfully, but check resp ARGS for any errors */
> + MBOX_RESP_STATOK = 0,
> + /* CMD is incorrectly formatted in some way */
> + MBOX_RESP_INVALID_COMMAND = 1,
> + /* BootROM Command code not undesrtood */
> + MBOX_RESP_UNKNOWN_BR = 2,
> + /* CMD code not recognized by firmware */
> + MBOX_RESP_UNKNOWN = 3,
> + /* Indicates that the device is not configured */
> + MBOX_RESP_NOT_CONFIGURED = 256,
> + /* Indicates that the device is busy */
> + MBOX_RESP_DEVICE_BUSY = 0x1FF,
> + /* Indicates that there is no valid response available */
> + MBOX_RESP_NO_VALID_RESP_AVAILABLE = 0x2FF,
> + /* General Error */
> + MBOX_RESP_ERROR = 0x3FF,
> +};
> +
> +/* Mailbox command list */
> +#define MBOX_RESTART 2
> +#define MBOX_CONFIG_STATUS 4
> +#define MBOX_RECONFIG 6
> +#define MBOX_RECONFIG_MSEL 7
> +#define MBOX_RECONFIG_DATA 8
> +#define MBOX_RECONFIG_STATUS 9
> +#define MBOX_QSPI_OPEN 50
> +#define MBOX_QSPI_CLOSE 51
> +#define MBOX_QSPI_DIRECT 59
> +#define MBOX_REBOOT_HPS 71
> +
> +struct socfpga_mailbox {
We should probably just use register offset macros in new code, this
struct {} stuff often doesn't work too well and the limitations are showing.
> + u32 cin; /* command valid offset */
> + u32 rout; /* response output offset */
> + u32 urg; /* urgent command */
> + u32 flags; /* interrupt enables */
> + u32 pad_0x10_0x1f[4]; /* 0x10 - 0x1F reserved */
> + u32 cout; /* command free offset */
> + u32 rin; /* respond valid offset */
> + u32 pad_0x28; /* 0x28 reserved */
> + u32 status; /* mailbox status */
> + u32 pad_0x30_0x3f[4]; /* 0x30 - 0x3F reserved */
> + u32 cmd_buf[MBOX_CMD_BUFFER_SIZE]; /* 0x40 - 0xBC circular command
> + * buffer to SDM
> + */
> + u32 resp_buf[MBOX_RESP_BUFFER_SIZE]; /* 0xC0 - 0xFF circular
> + * response buffer
> + */
> +};
> +
> +/* Use define other than put into struct socfpga_mailbox to save spaces */
> +#define MBOX_DOORBELL_TO_SDM_REG (SOCFPGA_MAILBOX_ADDRESS + 0x400)
> +#define MBOX_DOORBELL_FROM_SDM_REG (SOCFPGA_MAILBOX_ADDRESS + 0x480)
> +
> +/******** Status and bit information returned by RECONFIG_STATUS ********/
> +#define RECONFIG_STATUS_RESPONSE_LEN 6
> +#define RECONFIG_STATUS_STATE 0
> +#define RECONFIG_STATUS_PIN_STATUS 2
> +#define RECONFIG_STATUS_SOFTFUNC_STATUS 3
> +
> +#define MBOX_CFGSTAT_STATE_IDLE 0x00000000
> +#define MBOX_CFGSTAT_STATE_CONFIG 0x10000000
> +#define MBOX_CFGSTAT_STATE_FAILACK 0x08000000
> +#define MBOX_CFGSTAT_STATE_ERROR_INVALID 0xf0000001
> +#define MBOX_CFGSTAT_STATE_ERROR_CORRUPT 0xf0000002
> +#define MBOX_CFGSTAT_STATE_ERROR_AUTH 0xf0000003
> +#define MBOX_CFGSTAT_STATE_ERROR_CORE_IO 0xf0000004
> +#define MBOX_CFGSTAT_STATE_ERROR_HARDWARE 0xf0000005
> +#define MBOX_CFGSTAT_STATE_ERROR_FAKE 0xf0000006
> +#define MBOX_CFGSTAT_STATE_ERROR_BOOT_INFO 0xf0000007
> +#define MBOX_CFGSTAT_STATE_ERROR_QSPI_ERROR 0xf0000008
> +
> +#define RCF_SOFTFUNC_STATUS_CONF_DONE BIT(0)
> +#define RCF_SOFTFUNC_STATUS_INIT_DONE BIT(1)
> +#define RCF_SOFTFUNC_STATUS_SEU_ERROR BIT(3)
> +#define RCF_PIN_STATUS_NSTATUS BIT(31)
> +/************************************************************************/
> +
> +int mbox_send_cmd(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg, u8 urgent,
> + u32 *resp_buf_len, u32 *resp_buf);
> +int mbox_send_cmd_psci(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg,
> + u8 urgent, u32 *resp_buf_len, u32 *resp_buf);
> +int mbox_send_cmd_only(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg);
> +int mbox_send_cmd_only_psci(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg);
> +int mbox_rcv_resp(u32 *resp_buf, u32 resp_buf_max_len);
> +int mbox_rcv_resp_psci(u32 *resp_buf, u32 resp_buf_max_len);
> +int mbox_init(void);
> +
> +#ifdef CONFIG_CADENCE_QSPI
> +int mbox_qspi_close(void);
> +int mbox_qspi_open(void);
> +#endif
> +
> +int mbox_reset_cold(void);
> +
> +#endif /* _MAILBOX_S10_H_ */
> diff --git a/arch/arm/mach-socfpga/mailbox_s10.c b/arch/arm/mach-socfpga/mailbox_s10.c
> new file mode 100644
> index 0000000..ed713a9
> --- /dev/null
> +++ b/arch/arm/mach-socfpga/mailbox_s10.c
> @@ -0,0 +1,378 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2017-2018 Intel Corporation <www.intel.com>
> + *
> + */
> +
> +#include <common.h>
> +#include <wait_bit.h>
> +#include <asm/io.h>
> +#include <asm/arch/mailbox_s10.h>
> +#include <asm/arch/system_manager.h>
> +#include <asm/secure.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static __always_inline int mbox_polling_resp(u32 rout)
> +{
> + static const struct socfpga_mailbox *mbox_base =
> + (void *)SOCFPGA_MAILBOX_ADDRESS;
> + u32 rin;
> + unsigned long i = ~0;
> +
> + while (i) {
> + rin = readl(&mbox_base->rin);
> + if (rout != rin)
> + return 0;
This looks like include/wait_bit.h reimplementation
> + i--;
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +/* Check for available slot and write to circular buffer.
> + * It also update command valid offset (cin) register.
> + */
> +static __always_inline int mbox_fill_cmd_circular_buff(u32 header, u32 len,
> + u32 *arg)
> +{
> + static const struct socfpga_mailbox *mbox_base =
> + (void *)SOCFPGA_MAILBOX_ADDRESS;
> + u32 cin;
> + u32 cout;
> + u32 i;
> +
> + cin = readl(&mbox_base->cin) % MBOX_CMD_BUFFER_SIZE;
> + cout = readl(&mbox_base->cout) % MBOX_CMD_BUFFER_SIZE;
> +
> + /* if command buffer is full or not enough free space
> + * to fit the data
> + */
> + if (((cin + 1) % MBOX_CMD_BUFFER_SIZE) == cout ||
> + ((MBOX_CMD_BUFFER_SIZE - cin + cout - 1) %
> + MBOX_CMD_BUFFER_SIZE) < len)
> + return -ENOMEM;
> +
> + /* write header to circular buffer */
> + writel(header, &mbox_base->cmd_buf[cin++]);
> + /* wrapping around when it reach the buffer size */
> + cin %= MBOX_CMD_BUFFER_SIZE;
> +
> + /* write arguments */
> + for (i = 0; i < len; i++) {
> + writel(arg[i], &mbox_base->cmd_buf[cin++]);
> + /* wrapping around when it reach the buffer size */
> + cin %= MBOX_CMD_BUFFER_SIZE;
> + }
> +
> + /* write command valid offset */
> + writel(cin, &mbox_base->cin);
> +
> + return 0;
> +}
> +
> +/* Check the command and fill it into circular buffer */
> +static __always_inline int mbox_prepare_cmd_only(u8 id, u32 cmd,
> + u8 is_indirect, u32 len,
> + u32 *arg)
> +{
> + u32 header;
> + int ret;
> +
> + /* Total length is command + argument length */
> + if ((len + 1) > MBOX_CMD_BUFFER_SIZE)
> + return -EINVAL;
> +
> + if (cmd > MBOX_MAX_CMD_INDEX)
> + return -EINVAL;
> +
> + header = MBOX_CMD_HEADER(MBOX_CLIENT_ID_UBOOT, id, len,
> + (is_indirect) ? 1 : 0, cmd);
> +
> + ret = mbox_fill_cmd_circular_buff(header, len, arg);
> +
> + return ret;
> +}
> +
> +/* Send command only without waiting for responses from SDM */
> +static __always_inline int __mbox_send_cmd_only(u8 id, u32 cmd,
> + u8 is_indirect, u32 len,
> + u32 *arg)
> +{
> + int ret = mbox_prepare_cmd_only(id, cmd, is_indirect, len, arg);
> + /* write doorbell */
> + writel(1, MBOX_DOORBELL_TO_SDM_REG);
> +
> + return ret;
> +}
> +
> +/* Return number of responses received in buffer */
> +static __always_inline int __mbox_rcv_resp(u32 *resp_buf, u32 resp_buf_max_len)
__always_inline is nonsense, drop it. Let the compiler do it's thing.
> +{
> + static const struct socfpga_mailbox *mbox_base =
> + (void *)SOCFPGA_MAILBOX_ADDRESS;
> + u32 rin;
> + u32 rout;
> + u32 resp_len = 0;
> +
> + /* clear doorbell from SDM if it was SET */
> + if (readl((const u32 *)MBOX_DOORBELL_FROM_SDM_REG) & 1)
> + writel(0, MBOX_DOORBELL_FROM_SDM_REG);
> +
> + /* read current response offset */
> + rout = readl(&mbox_base->rout);
> + /* read response valid offset */
> + rin = readl(&mbox_base->rin);
> +
> + while (rin != rout && (resp_len < resp_buf_max_len)) {
> + /* Response received */
> + if (resp_buf)
> + resp_buf[resp_len++] =
> + readl(&mbox_base->resp_buf[rout]);
> + rout++;
> + /* wrapping around when it reach the buffer size */
> + rout %= MBOX_RESP_BUFFER_SIZE;
> + /* update next ROUT */
> + writel(rout, &mbox_base->rout);
> + }
> +
> + return resp_len;
> +}
> +
> +/* Support one command and up to 31 words argument length only */
> +static __always_inline int __mbox_send_cmd(u8 id, u32 cmd, u8 is_indirect,
> + u32 len, u32 *arg, u8 urgent,
> + u32 *resp_buf_len, u32 *resp_buf)
> +{
> + static const struct socfpga_mailbox *mbox_base =
> + (void *)SOCFPGA_MAILBOX_ADDRESS;
> +
> + u32 rin;
> + u32 resp;
> + u32 rout;
> + u32 status;
> + u32 resp_len;
> + u32 buf_len;
> + int ret;
> +
> + ret = mbox_prepare_cmd_only(id, cmd, is_indirect, len, arg);
> + if (ret)
> + return ret;
> +
> + if (urgent) {
> + /* Read status because it is toggled */
> + status = readl(&mbox_base->status) & MBOX_STATUS_UA_MSK;
> + /* Send command as urgent command */
> + writel(1, &mbox_base->urg);
> + }
> +
> + /* write doorbell */
> + writel(1, MBOX_DOORBELL_TO_SDM_REG);
> +
> + while (1) {
> + ret = ~0;
> +
> + /* Wait for doorbell from SDM */
> + while (!readl(MBOX_DOORBELL_FROM_SDM_REG) && ret--)
> + ;
> + if (!ret)
> + return -ETIMEDOUT;
wait_for_bit...
> + /* clear interrupt */
> + writel(0, MBOX_DOORBELL_FROM_SDM_REG);
> +
> + if (urgent) {
> + u32 new_status = readl(&mbox_base->status);
> + /* urgent command doesn't have response */
> + writel(0, &mbox_base->urg);
> + /* Urgent ACK is toggled */
> + if ((new_status & MBOX_STATUS_UA_MSK) ^ status)
> + return 0;
> +
> + return -ECOMM;
> + }
> +
> + /* read current response offset */
> + rout = readl(&mbox_base->rout);
> +
> + /* read response valid offset */
> + rin = readl(&mbox_base->rin);
> +
> + if (rout != rin) {
> + /* Response received */
> + resp = readl(&mbox_base->resp_buf[rout]);
> + rout++;
> + /* wrapping around when it reach the buffer size */
> + rout %= MBOX_RESP_BUFFER_SIZE;
> + /* update next ROUT */
> + writel(rout, &mbox_base->rout);
> +
> + /* check client ID and ID */
> + if ((MBOX_RESP_CLIENT_GET(resp) == MBOX_CLIENT_ID_UBOOT) &&
> + (MBOX_RESP_ID_GET(resp) == id)) {
> + ret = MBOX_RESP_ERR_GET(resp);
> + if (ret)
> + return ret;
> +
> + if (resp_buf_len) {
> + buf_len = *resp_buf_len;
> + *resp_buf_len = 0;
> + } else {
> + buf_len = 0;
> + }
> +
> + resp_len = MBOX_RESP_LEN_GET(resp);
> + while (resp_len) {
> + ret = mbox_polling_resp(rout);
> + if (ret)
> + return ret;
> + /* we need to process response buffer
> + * even caller doesn't need it
> + */
> + resp = readl(&mbox_base->resp_buf[rout]);
> + rout++;
> + resp_len--;
> + rout %= MBOX_RESP_BUFFER_SIZE;
> + writel(rout, &mbox_base->rout);
> + if (buf_len) {
> + /* copy response to buffer */
> + resp_buf[*resp_buf_len] = resp;
> + (*resp_buf_len)++;
> + buf_len--;
> + }
> + }
> + return ret;
> + }
> + }
> + };
> +
> + return -EIO;
> +}
> +
> +int mbox_init(void)
> +{
> + static const struct socfpga_mailbox *mbox_base =
> + (void *)SOCFPGA_MAILBOX_ADDRESS;
> + int ret;
> +
> + /* enable mailbox interrupts */
> + writel(MBOX_ALL_INTRS, &mbox_base->flags);
> +
> + /* Ensure urgent request is cleared */
> + writel(0, &mbox_base->urg);
> +
> + /* Ensure the Doorbell Interrupt is cleared */
> + writel(0, MBOX_DOORBELL_FROM_SDM_REG);
> +
> + ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_RESTART, MBOX_CMD_DIRECT, 0,
> + NULL, 1, 0, NULL);
> + if (ret)
> + return ret;
> +
> + /* Renable mailbox interrupts after MBOX_RESTART */
> + writel(MBOX_ALL_INTRS, &mbox_base->flags);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_CADENCE_QSPI
> +int mbox_qspi_close(void)
> +{
> + return mbox_send_cmd(MBOX_ID_UBOOT, MBOX_QSPI_CLOSE, MBOX_CMD_DIRECT,
> + 0, NULL, 0, 0, NULL);
> +}
> +
> +int mbox_qspi_open(void)
> +{
> + static const struct socfpga_system_manager *sysmgr_regs =
> + (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
> +
> + int ret;
> + u32 resp_buf[1];
> + u32 resp_buf_len;
> +
> + ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_QSPI_OPEN, MBOX_CMD_DIRECT,
> + 0, NULL, 0, 0, NULL);
> + if (ret) {
> + /* retry again by closing and reopen the QSPI again */
> + ret = mbox_qspi_close();
> + if (ret)
> + return ret;
> +
> + ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_QSPI_OPEN,
> + MBOX_CMD_DIRECT, 0, NULL, 0, 0, NULL);
> + if (ret)
> + return ret;
> + }
> +
> + /* HPS will directly control the QSPI controller, no longer mailbox */
> + resp_buf_len = 1;
> + ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_QSPI_DIRECT, MBOX_CMD_DIRECT,
> + 0, NULL, 0, (u32 *)&resp_buf_len,
> + (u32 *)&resp_buf);
> + if (ret)
> + goto error;
> +
> + /* We are getting QSPI ref clock and set into sysmgr boot register */
> + printf("QSPI: Reference clock at %d Hz\n", resp_buf[0]);
Certainly something I can get out of clock or clk command, drop the print.
> + writel(resp_buf[0], &sysmgr_regs->boot_scratch_cold0);
> +
> + return 0;
> +
> +error:
> + mbox_qspi_close();
> +
> + return ret;
> +}
> +#endif /* CONFIG_CADENCE_QSPI */
> +
> +int mbox_reset_cold(void)
> +{
> + int ret;
> +
> + ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_REBOOT_HPS, MBOX_CMD_DIRECT,
> + 0, NULL, 0, 0, NULL);
> + if (ret) {
> + /* mailbox sent failure, wait for watchdog to kick in */
> + while (1)
> + ;
Is this supposed to be hang() ?
> + }
> + return 0;
> +}
> +
> +int mbox_send_cmd(u8 id, u32 cmd, u8 is_indirect, u32 len, u32 *arg,
> + u8 urgent, u32 *resp_buf_len, u32 *resp_buf)
> +{
> + return __mbox_send_cmd(id, cmd, is_indirect, len, arg, urgent,
> + resp_buf_len, resp_buf);
> +}
__anything is reserved for compiler, drop the leading underscores
>
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list