[U-Boot] [PATCH V3 1/3] imx6: Define 'soc' env var for imx6 SoC

[Guillaume Gardet]

Le 11/04/2018 à 18:06, Fabio Estevam a écrit :
> On Wed, Apr 11, 2018 at 12:52 PM, Guillaume Gardet
> <guillaume.gardet at free.fr> wrote:
>
>> So, how to handle dtb filenames? Update with wrong soc definition ? Or drop
>> this patch and define a FDTFILE for each flavor?
> You can take a look at how we handle this for wandboard, cuboxi,
> sabresd, for example.
>
> Taking mx6sabresd as an example you can look at board_late_init() in
> board/freescale/mx6sabresd/mx6sabresd.c
>
> Then inside  include/configs/mx6sabre_common.h check for the findfdt
> script that picks the correct dtb.
>
Ok. So, how would you like to proceed?
Remove the generic mx6 'soc' definition and use a board sepcific 'board_rev' (or maybe a static definition if one configuration match a single dtb) to define the right dtb?

Could you tell me which DTB should work with the various nitrogen6x boards config?

Here are the one I could get from upstream kernel dts folder and possible config match:
* imx6q-nitrogen6x.dts     =>     nitrogen6q2g_defconfig nitrogen6q_defconfig
* imx6q-nitrogen6_max.dts     =>     none?
* imx6q-nitrogen6_som2.dts     =>     none?
* imx6qp-nitrogen6_max.dts     =>     none?
* imx6qp-nitrogen6_som2.dts     =>     none?
* imx6dl-nitrogen6x.dts     =>     nitrogen6dl2g_defconfig nitrogen6dl_defconfig
* imx6sx-nitrogen6sx.dts     =>     nitrogen6s1g_defconfig nitrogen6s_defconfig
* imx6q-sabrelite.dts     =>     mx6qsabrelite_defconfig
* imx6dl-sabrelite.dts     =>     none?


Guillaume