[U-Boot] [PATCH v4 00/11] Add support for DM_USB for TI's DRA7 EVMs and AM57 EVMs platforms

[Jean-Jacques Hiblot]

Supporting DM USB is required to support DM_ETH and USB network adapters
with the same binary.
This series adds support for DM_USB for the DRA7/AM57 families. As a bonus
it adds support for USB3.

This series applies on the usb tree with the following fixes:
-[PATCH] reset: fix bulk API when DM_RESET is disabled
-[PATCH] usb: dwc3-of-simple: fix error check of clk_get_bulk when disabled

limitation:
- only Host mode is supported. The Device mode can be added later.

Tested on:
- dra7 evm
- dra71 evm
- dra72 evm
- dra72 evm rev C
- dra76 evm
- AM572 evm

Changes in v4:
- Fix word missing in commit log
- Remove dependency on MISC
- Renamed the commit "configs: enable DM_USB for all the platforms of the DRA7 family"
- Remove omap specific glue layer and use dwc3-of-simple glue layer

Changes in v3:
- in syscon_regmap_lookup_by_phandle(), use dev_dbg() instead of printf()
- added unit test for syscon_regmap_lookup_by_phandle()

Changes in v2:
- Add USB3 support to ti-pipe3-phy driver
- omap-usb2-phy: Implement power_on and power_off callbacks
- am57xx boards: when DM_USB is used, turn on the required USB clocks
- split dts changes in 2 commits: one for binding the children of
  ocp2scp at 4a080000, and one to disable USB1  on all DRA7 EVMs
- Instead of disabling USB1 port in dts files, use *-u-boot.dtsi files
- Enable DM_USB in am57xx_evm_defconfig. USB3 (super speed) is supported.

Jean-Jacques Hiblot (9):
  usb: dwc3-of-simple: Fix dependencies
  usb: dwc3-of-simple: Add support for DRA7/AM57 platforms.
  syscon: dm: Add a new method to get a regmap from DTS
  phy: Add a new driver for OMAP's USB2 PHYs
  board: ti: dra7xx-evm: turn on USB clocks in late init stage
  dts: dra7x: make ocp2scp at 4a080000 compatible with simple-bus
  dts: dra7x: Disable USB1 on all evms
  configs: enable OMAP_USB2_PHY for all DRA7 platforms
  configs: am57xx_evm: Enable DM_USB and dependencies

Vignesh R (2):
  phy: ti-pip3-phy: Add support for USB3 PHY
  board; ti: am57xx: turn on USB clocks

 arch/arm/dts/dra7-evm-u-boot.dtsi       |   8 ++
 arch/arm/dts/dra71-evm-u-boot.dtsi      |   9 ++
 arch/arm/dts/dra72-evm-revc-u-boot.dtsi |   8 ++
 arch/arm/dts/dra72-evm-u-boot.dtsi      |  22 ++++
 arch/arm/dts/dra76-evm-u-boot.dtsi      |   9 ++
 arch/arm/dts/omap5-u-boot.dtsi          |   4 +
 arch/sandbox/dts/test.dts               |   6 +-
 board/ti/am57xx/board.c                 |  19 ++++
 board/ti/dra7xx/evm.c                   |  19 ++++
 configs/am57xx_evm_defconfig            |   4 +
 configs/dra7xx_evm_defconfig            |   1 +
 configs/dra7xx_hs_evm_defconfig         |   1 +
 drivers/core/syscon-uclass.c            |  23 ++++
 drivers/phy/Kconfig                     |   8 ++
 drivers/phy/Makefile                    |   1 +
 drivers/phy/omap-usb2-phy.c             | 196 ++++++++++++++++++++++++++++++++
 drivers/phy/ti-pipe3-phy.c              |  30 +++--
 drivers/usb/host/Kconfig                |   3 +-
 drivers/usb/host/dwc3-of-simple.c       |   1 +
 include/syscon.h                        |  13 +++
 test/dm/syscon.c                        |  29 +++++
 21 files changed, 404 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/dts/dra72-evm-u-boot.dtsi
 create mode 100644 drivers/phy/omap-usb2-phy.c

-- 
2.7.4