[U-Boot] [PATCH 5/6] i2c: designware: add reset ctrl to driver

[Dinh Nguyen]

Add code to look for a reset manager property. Specifically, look for the
reset-names of 'i2c'. A reset property is an optional feature, so only print
out a warning and do not fail if a reset property is not present.

If a reset property is discovered, then use it to deassert, thus bringing the
IP out of reset.

Signed-off-by: Dinh Nguyen <dinguyen at kernel.org>
---
 drivers/i2c/designware_i2c.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c
index 8cfed21..419d021 100644
--- a/drivers/i2c/designware_i2c.c
+++ b/drivers/i2c/designware_i2c.c
@@ -9,6 +9,7 @@
 #include <dm.h>
 #include <i2c.h>
 #include <pci.h>
+#include <reset.h>
 #include <asm/io.h>
 #include "designware_i2c.h"
 
@@ -34,6 +35,7 @@ static struct dw_scl_sda_cfg byt_config = {
 struct dw_i2c {
 	struct i2c_regs *regs;
 	struct dw_scl_sda_cfg *scl_sda_cfg;
+	struct reset_ctl reset_ctl;
 };
 
 #ifdef CONFIG_SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED
@@ -534,6 +536,7 @@ static int designware_i2c_probe_chip(struct udevice *bus, uint chip_addr,
 static int designware_i2c_probe(struct udevice *bus)
 {
 	struct dw_i2c *priv = dev_get_priv(bus);
+	int ret;
 
 	if (device_is_on_pci_bus(bus)) {
 #ifdef CONFIG_DM_PCI
@@ -549,6 +552,13 @@ static int designware_i2c_probe(struct udevice *bus)
 		priv->regs = (struct i2c_regs *)devfdt_get_addr_ptr(bus);
 	}
 
+	ret = reset_get_by_name(bus, "i2c", &priv->reset_ctl);
+	if (ret)
+		pr_info("reset_get_by_name() failed: %d\n", ret);
+
+	if (&priv->reset_ctl)
+		reset_deassert(&priv->reset_ctl);
+
 	__dw_i2c_init(priv->regs, 0, 0);
 
 	return 0;
-- 
2.7.4