[U-Boot] [PATCH] sunxi: Add support for Libre Computer Board ALL-H3-CC H5 ver.

[Neil Armstrong]

The Libre Computer Board ALL-H3-CC from Libre Technology is a Raspberry
Pi B+ form factor single board computer based on the Allwinner H3 or H5 SoC.
The board has 1GB DDR3 SDRAM, provided by 4 2Gb chips. The mounting holes
and connectors are in the exact same position as on the Raspberry Pi B+.

This patch adds defconfig and dts files for the H5 variant of the same board.
The dts file simply includes the H3 variant since the board is the same.

The defconfig is based on the H3 variant and adapted to build for the H5.

This follows the corresponding Linux patchset at [1].

[1] http://lkml.kernel.org/r/1524561576-2201-1-git-send-email-narmstrong@baylibre.com

Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
 arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts | 12 ++++++++++++
 configs/libretech_all_h3_cc_h5_defconfig       | 17 +++++++++++++++++
 2 files changed, 29 insertions(+)
 create mode 100644 arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts
 create mode 100644 configs/libretech_all_h3_cc_h5_defconfig

diff --git a/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts b/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts
new file mode 100644
index 0000000..a72b0a3
--- /dev/null
+++ b/arch/arm/dts/sun50i-h5-libretech-all-h3-cc.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong at baylibre.com>
+ */
+
+#include "sun8i-h3-libretech-all-h3-cc.dts"
+
+/ {
+	model = "Libre Computer Board ALL-H3-CC H5";
+	compatible = "libretech,all-h3-cc-h5", "allwinner,sun50i-h5";
+};
diff --git a/configs/libretech_all_h3_cc_h5_defconfig b/configs/libretech_all_h3_cc_h5_defconfig
new file mode 100644
index 0000000..8e5021d
--- /dev/null
+++ b/configs/libretech_all_h3_cc_h5_defconfig
@@ -0,0 +1,17 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I_H5=y
+CONFIG_DRAM_CLK=672
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+CONFIG_R_I2C_ENABLE=y
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-libretech-all-h3-cc"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C_SUPPORT=y
+# CONFIG_CMD_FLASH is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-- 
2.7.4