[U-Boot] [PATCH v2 1/2] imx: board: Add support for the K+P's kp_imx6q_tpc board

[Stefano Babic]

On 05/04/2018 09:04, Lukasz Majewski wrote:
> This commit provides support for Kieback & Peter GmbH IMX6Q based
> TPC board.
> 
> U-boot console output:
> 
> U-Boot SPL 2018.05-rc1-00005-g631e2d01fd (Apr 04 2018 - 21:16:24 +0200)
> Trying to boot from MMC1
> 
> U-Boot 2018.05-rc1-00005-g631e2d01fd (Apr 04 2018 - 21:16:24 +0200)
> 
> CPU:   Freescale i.MX6Q rev1.5 996 MHz (running at 792 MHz)
> CPU:   Extended Commercial temperature grade (-20C to 105C) at 37C
> Reset cause: POR
> Board: K+P KP_IMX6Q_TPC i.MX6Q
>        Watchdog enabled
> I2C:   ready
> DRAM:  2 GiB
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1
> Loading Environment from MMC... OK
> In:    serial
> Out:   serial
> Err:   serial
> Net:   FEC [PRIME]
> Autoboot in 3 seconds
> 
> ---
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================