[U-Boot] [PATCH v1 1/3] arm: socfpga: stratix10: Add Stratix10 FPGA Reconfiguration Driver
Marek Vasut
marex at denx.de
Fri Apr 20 03:41:05 UTC 2018
On 04/20/2018 05:26 AM, chee.hong.ang at intel.com wrote:
> From: Chee Hong Ang <chee.hong.ang at intel.com>
>
> Enable FPGA reconfiguration support on Stratix10 SoC.
>
> Signed-off-by: Chee Hong Ang <chee.hong.ang at intel.com>
> ---
> drivers/fpga/Kconfig | 10 ++
> drivers/fpga/Makefile | 1 +
> drivers/fpga/stratix10.c | 298 +++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 309 insertions(+)
> create mode 100644 drivers/fpga/stratix10.c
>
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index d36c4c5..255683d 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -31,6 +31,16 @@ config FPGA_CYCLON2
> Enable FPGA driver for loading bitstream in BIT and BIN format
> on Altera Cyclone II device.
>
> +config FPGA_STRATIX10
> + bool "Enable Altera FPGA driver for Stratix 10"
> + depends on FPGA_ALTERA && TARGET_SOCFPGA_STRATIX10
> + help
> + Say Y here to enable the Altera Stratix 10 FPGA specific driver
> +
> + This provides common functionality for Altera Stratix 10 devices.
> + Enable FPGA driver for writing bitstream into Altera Stratix10
> + device.
> +
> config FPGA_XILINX
> bool "Enable Xilinx FPGA drivers"
> select FPGA
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index 08c9ff8..3c906ec 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -19,6 +19,7 @@ obj-$(CONFIG_FPGA_ACEX1K) += ACEX1K.o
> obj-$(CONFIG_FPGA_CYCLON2) += cyclon2.o
> obj-$(CONFIG_FPGA_STRATIX_II) += stratixII.o
> obj-$(CONFIG_FPGA_STRATIX_V) += stratixv.o
> +obj-$(CONFIG_FPGA_STRATIX10) += stratix10.o
> obj-$(CONFIG_FPGA_SOCFPGA) += socfpga.o
> obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += socfpga_gen5.o
> obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += socfpga_arria10.o
> diff --git a/drivers/fpga/stratix10.c b/drivers/fpga/stratix10.c
> new file mode 100644
> index 0000000..f0c5ace
> --- /dev/null
> +++ b/drivers/fpga/stratix10.c
> @@ -0,0 +1,298 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
> + *
> + */
> +
> +#include <common.h>
> +#include <altera.h>
> +#include <asm/arch/mailbox_s10.h>
> +
> +#define RECONFIG_STATUS_POLL_RESP_TIMEOUT_MS 60000
> +#define RECONFIG_STATUS_INTERVAL_DELAY_US 1000000
> +
> +static const struct mbox_cfgstat_state {
> + int err_no;
> + const char *error_name;
> +} mbox_cfgstat_state[] = {
> + {MBOX_CFGSTAT_STATE_IDLE, "FPGA in idle mode."},
> + {MBOX_CFGSTAT_STATE_CONFIG, "FPGA in config mode."},
> + {MBOX_CFGSTAT_STATE_FAILACK, "Acknowledgement failed!"},
> + {MBOX_CFGSTAT_STATE_ERROR_INVALID, "Invalid bitstream!"},
> + {MBOX_CFGSTAT_STATE_ERROR_CORRUPT, "Corrupted bitstream!"},
> + {MBOX_CFGSTAT_STATE_ERROR_AUTH, "Authentication failed!"},
> + {MBOX_CFGSTAT_STATE_ERROR_CORE_IO, "I/O error!"},
> + {MBOX_CFGSTAT_STATE_ERROR_HARDWARE, "Hardware error!"},
> + {MBOX_CFGSTAT_STATE_ERROR_FAKE, "Fake error!"},
> + {MBOX_CFGSTAT_STATE_ERROR_BOOT_INFO, "Error in boot info!"},
> + {MBOX_CFGSTAT_STATE_ERROR_QSPI_ERROR, "Error in QSPI!"},
> + {-ETIMEDOUT, "I/O timeout error"},
> + {-1, "Unknown error!"}
> +};
> +
> +#define MBOX_CFGSTAT_MAX \
> + (sizeof(mbox_cfgstat_state) / sizeof(struct mbox_cfgstat_state))
> +
> +static const char *mbox_cfgstat_to_str(int err)
> +{
> + int i;
> +
> + for (i = 0; i < MBOX_CFGSTAT_MAX - 1; i++) {
> + if (mbox_cfgstat_state[i].err_no == err)
> + return mbox_cfgstat_state[i].error_name;
> + }
> +
> + return mbox_cfgstat_state[MBOX_CFGSTAT_MAX - 1].error_name;
> +}
> +
> +static void inc_cmd_id(u8 *id)
> +{
> + u8 val = *id + 1;
> +
> + if (val > 15)
> + val = 1;
What's this function about, elaborate implementation of (i % 15) + 1 ?
> + *id = val;
> +}
> +
> +/*
> + * Polling the FPGA configuration status.
> + * Return 0 for success, non-zero for error.
> + */
> +static int reconfig_status_polling_resp(void)
> +{
> + u32 reconfig_status_resp_len;
> + u32 reconfig_status_resp[RECONFIG_STATUS_RESPONSE_LEN];
> + int ret;
> + unsigned long start = get_timer(0);
> +
> + while (1) {
> + reconfig_status_resp_len = RECONFIG_STATUS_RESPONSE_LEN;
> + ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_RECONFIG_STATUS,
> + MBOX_CMD_DIRECT, 0, NULL, 0,
> + &reconfig_status_resp_len,
> + reconfig_status_resp);
> +
> + if (ret) {
> + puts("Failure in RECONFIG_STATUS mailbox command!\n");
> + return ret;
> + }
> +
> + /* Check for any error */
> + ret = reconfig_status_resp[RECONFIG_STATUS_STATE];
> + if (ret && ret != MBOX_CFGSTAT_STATE_CONFIG)
> + return ret;
> +
> + /* Make sure nStatus is not 0 */
> + ret = reconfig_status_resp[RECONFIG_STATUS_PIN_STATUS];
> + if (!(ret & RCF_PIN_STATUS_NSTATUS))
> + return MBOX_CFGSTAT_STATE_ERROR_HARDWARE;
wait_for_bit_le32() or somesuch ?
> + ret = reconfig_status_resp[RECONFIG_STATUS_SOFTFUNC_STATUS];
> + if (ret & RCF_SOFTFUNC_STATUS_SEU_ERROR)
> + return MBOX_CFGSTAT_STATE_ERROR_HARDWARE;
> +
> + if ((ret & RCF_SOFTFUNC_STATUS_CONF_DONE) &&
> + (ret & RCF_SOFTFUNC_STATUS_INIT_DONE) &&
> + !reconfig_status_resp[RECONFIG_STATUS_STATE])
> + return 0; /* configuration success */
> +
> + if (get_timer(start) > RECONFIG_STATUS_POLL_RESP_TIMEOUT_MS)
> + break; /* time out */
> +
> + puts(".");
> + udelay(RECONFIG_STATUS_INTERVAL_DELAY_US);
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +static u32 get_resp_hdr(u32 *r_index, u32 *w_index, u32 *resp_count,
> + u32 *resp_buf, u32 buf_size, u32 client_id)
> +{
> + u32 i;
> + u32 mbox_hdr;
> + u32 resp_len;
> + u32 hdr_len;
> + u32 buf[MBOX_RESP_BUFFER_SIZE];
> +
> + if (*resp_count < buf_size) {
> + u32 rcv_len_max = buf_size - *resp_count;
> +
> + if (rcv_len_max > MBOX_RESP_BUFFER_SIZE)
> + rcv_len_max = MBOX_RESP_BUFFER_SIZE;
> + resp_len = mbox_rcv_resp(buf, rcv_len_max);
> +
> + for (i = 0; i < resp_len; i++) {
> + resp_buf[(*w_index)++] = buf[i];
Is this like a memcpy() ?
> + *w_index %= buf_size;
> + (*resp_count)++;
> + }
> + }
> +
> + /* No response in buffer */
> + if (*resp_count == 0)
> + return 0;
> +
> + mbox_hdr = resp_buf[*r_index];
> +
> + hdr_len = MBOX_RESP_LEN_GET(mbox_hdr);
> +
> + /* Insufficient header length to return a mailbox header */
> + if ((*resp_count - 1) < hdr_len)
> + return 0;
> +
> + *r_index += (hdr_len + 1);
> + *r_index %= buf_size;
> + *resp_count -= (hdr_len + 1);
> +
> + /* Make sure response belongs to us */
> + if (MBOX_RESP_CLIENT_GET(mbox_hdr) != client_id)
> + return 0;
> +
> + return mbox_hdr;
> +}
> +
> +static int send_reconfig_data(const void *rbf_data, size_t rbf_size,
> + u32 xfer_max, u32 buf_size_max)
> +{
> + u32 resp_rindex = 0;
> + u32 resp_windex = 0;
> + u32 resp_count = 0;
> + u32 response_buffer[MBOX_RESP_BUFFER_SIZE];
> + u8 resp_err = 0;
> + u8 cmd_id = 1;
> + u32 xfer_count = 0;
> + u32 xfer_pending[MBOX_RESP_BUFFER_SIZE];
> + u32 args[3];
> + int ret = 0;
> + u32 i;
> +
> + debug("SDM xfer_max = %d\n", xfer_max);
> + debug("SDM buf_size_max = %x\n\n", buf_size_max);
> +
> + for (i = 0; i < MBOX_RESP_BUFFER_SIZE; i++)
> + xfer_pending[i] = 0;
> +
> + while (rbf_size || xfer_count) {
> + if (!resp_err && rbf_size && xfer_count < xfer_max) {
This function is clearly too long, split it into separate functions
> + args[0] = (1 << 8);
That's BIT(8) .
> + args[1] = (u32)rbf_data;
> + if (rbf_size >= buf_size_max) {
> + args[2] = buf_size_max;
> + rbf_size -= buf_size_max;
> + rbf_data += buf_size_max;
> + } else {
> + args[2] = (u32)rbf_size;
> + rbf_size = 0;
> + }
> +
> + debug("Sending MBOX_RECONFIG_DATA...\n");
> +
> + ret = mbox_send_cmd_only(cmd_id, MBOX_RECONFIG_DATA,
> + MBOX_CMD_INDIRECT, 3, args);
> + if (ret) {
> + resp_err = 1;
> + } else {
> + xfer_count++;
> + for (i = 0; i < MBOX_RESP_BUFFER_SIZE; i++) {
> + if (!xfer_pending[i]) {
> + xfer_pending[i] = cmd_id;
> + inc_cmd_id(&cmd_id);
> + break;
> + }
> + }
> + debug("+xfer_count = %d\n", xfer_count);
> + debug("xfer ID = %d\n", xfer_pending[i]);
> + debug("data offset = %08x\n", args[1]);
> + debug("data size = %08x\n", args[2]);
> + }
> +#ifndef DEBUG
> + puts(".");
debug(".") is the same, except without the ifdef
> +#endif
> + } else {
> + u32 r_id = 0;
> + u32 resp_hdr = get_resp_hdr(&resp_rindex, &resp_windex,
> + &resp_count,
> + response_buffer,
> + MBOX_RESP_BUFFER_SIZE,
> + MBOX_CLIENT_ID_UBOOT);
> +
> + /* If no valid response header found */
> + if (!resp_hdr)
> + continue;
> +
> + /* Expect 0 length from RECONFIG_DATA */
> + if (MBOX_RESP_LEN_GET(resp_hdr))
> + continue;
> +
> + /* Check for response's status */
> + if (!resp_err) {
> + ret = MBOX_RESP_ERR_GET(resp_hdr);
> + debug("Response error code: %08x\n", ret);
> + /* Error in response */
> + if (ret)
> + resp_err = 1;
> + }
> +
> + /* Read the response header's ID */
> + r_id = MBOX_RESP_ID_GET(resp_hdr);
> + for (i = 0; i < MBOX_RESP_BUFFER_SIZE; i++) {
> + if (r_id == xfer_pending[i]) {
> + /* Reclaim ID */
> + cmd_id = (u32)xfer_pending[i];
> + xfer_pending[i] = 0;
> + xfer_count--;
> + break;
> + }
> + }
> +
> + debug("Reclaimed xfer ID = %d\n", cmd_id);
> + debug("-xfer_count = %d\n", xfer_count);
> + if (resp_err && !xfer_count)
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * This is the interface used by FPGA driver.
> + * Return 0 for success, non-zero for error.
> + */
> +int stratix10_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
> +{
> + int ret;
> + u32 resp_len = 2;
> + u32 resp_buf[2];
> +
> + debug("Sending MBOX_RECONFIG...\n");
> + ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_RECONFIG, MBOX_CMD_DIRECT, 0,
> + NULL, 0, &resp_len, resp_buf);
> + if (ret) {
> + puts("Failure in RECONFIG mailbox command!\n");
> + return ret;
> + }
> +
> + ret = send_reconfig_data(rbf_data, rbf_size, resp_buf[0], resp_buf[1]);
> + if (ret) {
> + printf("RECONFIG_DATA error: %08x, %s\n", ret,
> + mbox_cfgstat_to_str(ret));
> + return ret;
> + }
> +
> + /* Make sure we don't send MBOX_RECONFIG_STATUS too fast */
> + udelay(RECONFIG_STATUS_INTERVAL_DELAY_US);
Hum, this is iffy, is that a hardware bug ?
> + debug("\nPolling with MBOX_RECONFIG_STATUS...\n");
> + ret = reconfig_status_polling_resp();
> + if (ret) {
> + printf("Error: %s\n", mbox_cfgstat_to_str(ret));
> + return ret;
> + }
> +
> + puts("\nFPGA reconfiguration OK!\n");
> +
> + return ret;
> +}
>
--
Best regards,
Marek Vasut
More information about the U-Boot
mailing list