[U-Boot] [PATCH 2/2] tools/imximage: use 0x prefix in HAB Blocks line

[Stefano Babic]

On 23/03/2018 12:08, Rasmus Villemoes wrote:
> The u-boot-ivt.img.log file contains 0x prefixes in the HAB Blocks line,
> while the SPL.log does not. For consistency, and to make it easier to
> extract and put into a .csf file for use with NXP's code signing tool,
> add 0x prefixes here.
> 
> Signed-off-by: Rasmus Villemoes <rasmus.villemoes at prevas.dk>
> ---
>  doc/README.mxc_hab | 14 +++++++-------
>  tools/imximage.c   |  2 +-
>  2 files changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/doc/README.mxc_hab b/doc/README.mxc_hab
> index 75390a505e..a40ebf3e84 100644
> --- a/doc/README.mxc_hab
> +++ b/doc/README.mxc_hab
> @@ -33,12 +33,12 @@ Image Ver:    2 (i.MX53/6 compatible)
>  Data Size:    327680 Bytes = 320.00 kB = 0.31 MB
>  Load Address: 177ff420
>  Entry Point:  17800000
> -HAB Blocks:   177ff400 00000000 0004dc00
> -	      ^^^^^^^^ ^^^^^^^^ ^^^^^^^^
> -		|	|	   |
> -		|	|	   -------- (1)
> -		|	|
> -		|	------------------- (2)
> +HAB Blocks:   0x177ff400 0x00000000 0x0004dc00
> +	      ^^^^^^^^^^ ^^^^^^^^^^ ^^^^^^^^^^
> +		|	   |	      |
> +		|	   |	      ----- (1)
> +		|	   |
> +		|	   ---------------- (2)
>  		|
>  		--------------------------- (3)
>  
> @@ -78,7 +78,7 @@ Example Output of the SPL (imximage) creation:
>   Data Size:    61440 Bytes = 60.00 kB = 0.06 MB
>   Load Address: 00907420
>   Entry Point:  00908000
> - HAB Blocks:   00907400 00000000 0000cc00
> + HAB Blocks:   0x00907400 0x00000000 0x0000cc00
>  
>  Example Output of the u-boot-ivt.img (firmware_ivt) creation:
>   Image Name:   U-Boot 2016.11-rc1-31589-g2a4411
> diff --git a/tools/imximage.c b/tools/imximage.c
> index ed9d935903..6dabb13520 100644
> --- a/tools/imximage.c
> +++ b/tools/imximage.c
> @@ -516,7 +516,7 @@ static void print_hdr_v2(struct imx_header *imx_hdr)
>  			offs = (char *)&hdr_v2->data.dcd_table
>  				- (char *)hdr_v2;
>  
> -			printf("HAB Blocks:   %08x %08x %08x\n",
> +			printf("HAB Blocks:   0x%08x 0x%08x 0x%08x\n",
>  			       (uint32_t)fhdr_v2->self, 0,
>  			       hdr_v2->boot_data.size - imximage_ivt_offset -
>  			       imximage_csf_size);
> 

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================