[U-Boot] arm: socfpga: unable to boot cyclone5 devkit or SocKit

[Marek Vasut]

On 04/10/2018 08:28 PM, Dinh Nguyen wrote:
> Hi,
> 
> I'm seeking advice with an observation that I'm seeing on the Cyclone5
> devkit/sockit.
> 
> I'm working with U-Boot version v2018.05-rc1. Building the
> u-boot-with-spl.sfp, then writing the sfp file to the 0xa2 partition on
> the SD card, does not boot, all I get is this:
> 
> U-Boot SPL 2018.05-rc1 (Apr 10 2018 - 13:03:48 -0500)
> 
> U-Boot SPL 2018.05-rc1 (Apr 10 2018 - 13:03:48 -0500)
> 
> U-Boot SPL 2018.05-rc1 (Apr 10 2018 - 13:03:48 -0500)
> 
> 
> This issue doesn't happen at all on the DE0 Nano SoC board. I compared
> the defconfig and came across this. If I remove these config options in
> the socfpga_sockit_defconfig, then SPL -> U-Boot works fine.
> 
> -CONFIG_SPI_FLASH_MACRONIX=y
> -CONFIG_SPI_FLASH_SPANSION=y
> -CONFIG_SPI_FLASH_STMICRO=y
> 
> I'll continue to debug of course, but was wondering if anyone might have
> a better idea as to what could be happening, I'd appreciate the insight.

Check the size of the SPL , could it be too big ?

-- 
Best regards,
Marek Vasut