[U-Boot] [PATCH 1/2] nand: zynq: Fix driver initialization

[Michal Simek]

From: Ezequiel Garcia <ezequiel at vanguardiasur.com.ar>

This driver is currently broken, refusing to initialize properly.

The reason is that get_nand_dev_by_index() was being called before
nand_register(), thus returning a pointer into uninitialized memory.
In other words, the struct mtd_info used by the driver is total junk.

Fix it by getting the correct struct mtd_info, via nand_to_mtd()
on the driver's struct nand_chip.

Tested on a custom board, where the CPU is halted without this patch.

Signed-off-by: Ezequiel Garcia <ezequiel at vanguardiasur.com.ar>
Reviewed-by: Michal Simek <michal.simek at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 drivers/mtd/nand/zynq_nand.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/zynq_nand.c b/drivers/mtd/nand/zynq_nand.c
index 6494196049f1..9f6ff3d045c2 100644
--- a/drivers/mtd/nand/zynq_nand.c
+++ b/drivers/mtd/nand/zynq_nand.c
@@ -1025,7 +1025,7 @@ int zynq_nand_init(struct nand_chip *nand_chip, int devnum)
 	}
 
 	xnand->nand_base = (void __iomem *)ZYNQ_NAND_BASEADDR;
-	mtd = get_nand_dev_by_index(0);
+	mtd = nand_to_mtd(nand_chip);
 
 	nand_chip->priv = xnand;
 	mtd->priv = nand_chip;
-- 
2.17.0