[U-Boot] [PATCH v2 00/18] spi: mpc8xxx: DM conversion

[Joakim Tjernlund]

On Thu, 2018-04-26 at 11:35 +0530, Jagan Teki wrote:
> CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
> 
> 
> On Thu, Apr 26, 2018 at 11:24 AM, Mario Six <mario.six at gdsys.cc> wrote:
> > Hi Jagan,
> > 
> > On Thu, Apr 26, 2018 at 7:30 AM, Jagan Teki <jagannadh.teki at gmail.com> wrote:
> > > On Thu, Apr 19, 2018 at 6:06 PM, Mario Six <mario.six at gdsys.cc> wrote:
> > > > This is v2 of a patch series that adds support for DM to the MPC8XXX SPI
> > > > driver, cleans up the driver code, fixes a few minor problems.
> > > > 
> > > > Some TODOs are left over for later, such as proper SPI speed setting,
> > > > and support for SPI mode setting. These would be enhancements to the
> > > > original functionality, and can come later.
> > > > 
> > > > The legacy functionality is removed in this version, so old boards in
> > > > the tree might end up with broken SPI functionality.
> > > > 
> > > > Mario Six (18):
> > > >   spi: mpc8xxx: Use short type names
> > > >   spi: mpc8xxx: Fix comments
> > > >   spi: mpc8xxx: Rename camel-case variables
> > > >   spi: mpc8xxx: Fix space after cast
> > > >   spi: mpc8xxx: Fix function names in strings
> > > >   spi: mpc8xxx: Replace defines with enums
> > > >   spi: mpc8xxx: Use IO accessors
> > > >   spi: mpc8xxx: Simplify if
> > > >   spi: mpc8xxx: Get rid of is_read
> > > >   spi: mpc8xxx: Simplify logic a bit
> > > >   spi: mpc8xxx: Reduce scope of loop variables
> > > >   spi: mpc8xxx: Make code more readable
> > > >   spi: mpc8xxx: Rename variable
> > > >   spi: mpc8xxx: Document LEN setting better
> > > >   spi: mpc8xxx: Re-order transfer setup
> > > >   spi: mpc8xxx: Fix if check
> > > >   spi: mpc8xxx: Use get_timer
> > > >   spi: mpc8xxx: Convert to DM
> > > 
> > > Boards with
> > > - configs/MPC8349EMDS_defconfig
> > > - configs/ids8313_defconfig
> > > 
> > > are using this driver, so Kim, Heiko please convert enable DM_SPI for the same.
> > > 
> > > Use below tree for respective changes and update on top of this.
> > > http://git.denx.de/?p=u-boot-spi.git;a=shortlog;h=refs/heads/next
> > > 
> > 
> > I have a few series in the making that will enable DM on the MPC83xx platform
> > (I'm doing a respin on the first right now). If there is still interests in the
> > boards, I could push it to the MPC83xx repository (but mind that the work
> > required per board is quite extensive).
> > 
> > Also, MPC8349EMDS is de facto abandoned, and I don't have access to the
> > hardware, so I can't really maintain it.
> 
> It's up to you, look like this board maintained by Kim is not
> available with freescale e-mail (or may be changed) if none can't
> maintain, it better to drop the board.

we use custom 832x boards so please don't remove 83xx from u-boot.

 Jocke