[U-Boot] [PATCH] ARM: uniphier: move SPL stack address

[Masahiro Yamada]

2018-04-23 15:10 GMT+09:00 Masahiro Yamada <yamada.masahiro at socionext.com>:
> Currently, the address region, 0xf8000 - 0x100000, is used for SPL
> stack for the 32bit SoCs.  Because the U-Boot proper image starts
> from 0x70000, the maximum size of the U-Boot proper image is 544KB
> (0x70000 - 0xf8000) for the NOR boot mode.  Now uniphier_v7_defconfig
> is almost hitting this size limit.  Changing CONFIG_SPL_STACK can
> raise the size limit with less impact.  With this, the size limit
> will increase to 576KB (0x70000 - 0x100000).  If we need to increase
> it even more, we would be able to change CONFIG_SYS_UBOOT_BASE at the
> cost of the flashing command changes.
>
> Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
> ---


Applied to u-boot-uniphier.




-- 
Best Regards
Masahiro Yamada