[U-Boot] [PATCH v2] arm64: zynqmp: Setup MMU map for DDR at run time
Michal Simek
michal.simek at xilinx.com
Mon Apr 30 07:23:04 UTC 2018
From: Nitin Jain <nitin.jain at xilinx.com>
This patch fills the MMU map for DDR at run time based information read
from Device Tree or automatically detected from static configuration.
The patch is needed because for systems which has for example 1GB of memory
but MMU map is 2GB there could be spurious accesses which was seen in past
when mapping is not fitting with actual memory installed.
Signed-off-by: Nitin Jain <nitin.jain at xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
Changes in v2:
- Fix and extended commit description (asked-by: agraf)
arch/arm/cpu/armv8/zynqmp/cpu.c | 84 ++++++++++++--------
arch/arm/include/asm/arch-zynqmp/sys_proto.h | 2 +-
board/xilinx/zynqmp/zynqmp.c | 22 ++++-
3 files changed, 74 insertions(+), 34 deletions(-)
diff --git a/arch/arm/cpu/armv8/zynqmp/cpu.c b/arch/arm/cpu/armv8/zynqmp/cpu.c
index 14e7d4006494..5db5fafc6f65 100644
--- a/arch/arm/cpu/armv8/zynqmp/cpu.c
+++ b/arch/arm/cpu/armv8/zynqmp/cpu.c
@@ -16,16 +16,28 @@
DECLARE_GLOBAL_DATA_PTR;
-static struct mm_region zynqmp_mem_map[] = {
+/*
+ * Number of filled static entries and also the first empty
+ * slot in zynqmp_mem_map.
+ */
+#define ZYNQMP_MEM_MAP_USED 4
+
#if !defined(CONFIG_ZYNQMP_NO_DDR)
- {
- .virt = 0x0UL,
- .phys = 0x0UL,
- .size = 0x80000000UL,
- .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
- PTE_BLOCK_INNER_SHARE
- },
+#define DRAM_BANKS CONFIG_NR_DRAM_BANKS
+#else
+#define DRAM_BANKS 0
#endif
+
+#if defined(CONFIG_DEFINE_TCM_OCM_MMAP)
+#define TCM_MAP 1
+#else
+#define TCM_MAP 0
+#endif
+
+/* +1 is end of list which needs to be empty */
+#define ZYNQMP_MEM_MAP_MAX (ZYNQMP_MEM_MAP_USED + DRAM_BANKS + TCM_MAP + 1)
+
+static struct mm_region zynqmp_mem_map[ZYNQMP_MEM_MAP_MAX] = {
{
.virt = 0x80000000UL,
.phys = 0x80000000UL,
@@ -33,8 +45,7 @@ static struct mm_region zynqmp_mem_map[] = {
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
- },
- {
+ }, {
.virt = 0xf8000000UL,
.phys = 0xf8000000UL,
.size = 0x07e00000UL,
@@ -42,42 +53,51 @@ static struct mm_region zynqmp_mem_map[] = {
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
-#if defined(CONFIG_DEFINE_TCM_OCM_MMAP)
- .virt = 0xffe00000UL,
- .phys = 0xffe00000UL,
- .size = 0x00200000UL,
- .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
- PTE_BLOCK_INNER_SHARE
- }, {
-#endif
.virt = 0x400000000UL,
.phys = 0x400000000UL,
.size = 0x400000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
- },
-#if !defined(CONFIG_ZYNQMP_NO_DDR)
- {
- .virt = 0x800000000UL,
- .phys = 0x800000000UL,
- .size = 0x800000000UL,
- .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
- PTE_BLOCK_INNER_SHARE
- },
-#endif
- {
+ }, {
.virt = 0x1000000000UL,
.phys = 0x1000000000UL,
.size = 0xf000000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
- }, {
- /* List terminator */
- 0,
}
};
+
+void mem_map_fill(void)
+{
+ int banks = ZYNQMP_MEM_MAP_USED;
+
+#if defined(CONFIG_DEFINE_TCM_OCM_MMAP)
+ zynqmp_mem_map[banks].virt = 0xffe00000UL;
+ zynqmp_mem_map[banks].phys = 0xffe00000UL;
+ zynqmp_mem_map[banks].size = 0x00200000UL;
+ zynqmp_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE;
+ banks = banks + 1;
+#endif
+
+#if !defined(CONFIG_ZYNQMP_NO_DDR)
+ for (int i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ /* Skip empty banks */
+ if (!gd->bd->bi_dram[i].size)
+ break;
+
+ zynqmp_mem_map[banks].virt = gd->bd->bi_dram[i].start;
+ zynqmp_mem_map[banks].phys = gd->bd->bi_dram[i].start;
+ zynqmp_mem_map[banks].size = gd->bd->bi_dram[i].size;
+ zynqmp_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE;
+ banks = banks + 1;
+ }
+#endif
+}
+
struct mm_region *mem_map = zynqmp_mem_map;
u64 get_page_table_size(void)
diff --git a/arch/arm/include/asm/arch-zynqmp/sys_proto.h b/arch/arm/include/asm/arch-zynqmp/sys_proto.h
index 3daf0e81d80c..d11c0782b8dd 100644
--- a/arch/arm/include/asm/arch-zynqmp/sys_proto.h
+++ b/arch/arm/include/asm/arch-zynqmp/sys_proto.h
@@ -46,7 +46,7 @@ int invoke_smc(u32 pm_api_id, u32 arg0, u32 arg1, u32 arg2, u32 arg3,
u32 *ret_payload);
void initialize_tcm(bool mode);
-
+void mem_map_fill(void);
int chip_id(unsigned char id);
#endif /* _ASM_ARCH_SYS_PROTO_H */
diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c
index aeef0b4cdd7e..6d09a4c73139 100644
--- a/board/xilinx/zynqmp/zynqmp.c
+++ b/board/xilinx/zynqmp/zynqmp.c
@@ -406,7 +406,15 @@ unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc,
#if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
int dram_init_banksize(void)
{
- return fdtdec_setup_memory_banksize();
+ int ret;
+
+ ret = fdtdec_setup_memory_banksize();
+ if (ret)
+ return ret;
+
+ mem_map_fill();
+
+ return 0;
}
int dram_init(void)
@@ -417,6 +425,18 @@ int dram_init(void)
return 0;
}
#else
+int dram_init_banksize(void)
+{
+#if defined(CONFIG_NR_DRAM_BANKS)
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_dram[0].size = get_effective_memsize();
+#endif
+
+ mem_map_fill();
+
+ return 0;
+}
+
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
--
2.17.0
More information about the U-Boot
mailing list