[U-Boot] u-boot 2018 SPI SPL

[Mehmet Ali İPİN]

Dear Fabio,

Thank you for your helps..

I applied the procedure which is explained in board/congatec/cgtqmx6eval/README document.
Upgraded u-boot to 1018.05-rc1, 
but as you will see below, I received same message;

I will compare my config/header files with congatec's, but I don't know which parameters/definitions (should be /should not be) used; There fore I will appreciate any help if you could..

Thanks and best regards.


=> setenv ipaddr 10.4.50.5
=> setenv serverip 10.4.50.50
=> ping 10.4.50.50
Using FEC device
host 10.4.50.50 is alive
=>  sf probe 0
SF: Detected M45PE16 with page size 256 Bytes, erase size 64 KiB, total 2 MiB
=> tftp 0x12000000 SPL
Using FEC device
TFTP from server 10.4.50.50; our IP address is 10.4.50.5
Filename 'SPL'.
Load address: 0x12000000
Loading: ####
         3.2 MiB/s
done
Bytes transferred = 56320 (dc00 hex)
=> sf erase 0x0 0x10000
SF: 65536 bytes @ 0x0 Erased: OK
=> sf write 0x12000000 0x400 0x10000
device 0 offset 0x400, size 0x10000
SF: 65536 bytes @ 0x400 Written: OK
=> tftp 0x12000000 u-boot.img
Using FEC device
TFTP from server 10.4.50.50; our IP address is 10.4.50.5
Filename 'u-boot.img'.
Load address: 0x12000000
Loading: ########################
         5.7 MiB/s
done
Bytes transferred = 349576 (55588 hex)
=> sf erase 0x10000 0x70000
SF: 458752 bytes @ 0x10000 Erased: OK
=> sf write 0x12000000 0x10000 0x70000
device 0 offset 0x10000, size 0x70000
SF: 458752 bytes @ 0x10000 Written: OK
=>

U-Boot SPL 2018.05-rc1 (Apr 16 2018 - 00:31:02 -0700)
SPL: Unsupported Boot Device!
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###


On Fri, Apr 13, 2018 at 10:13 AM, Mehmet Ali İPİN <mehmet.ipin at pavotek.com.tr> wrote:
>
> Dear Fabio,
>
>
> I received the following message
>
> U-Boot SPL 2018.01 (Jan 17 2018 - 05:49:34)

Please use mainline 2018.03 or 2018.05-rc1 instead.