[U-Boot] [[RESEND] PATCH v3 2/2] mmc: zynq_sdhci: use correct quirk if CONFIG_ZYNQ_HISPD_BROKEN is defined

[Hannes Schmelzer]

The 'SDHCI_QUIRK_NO_HISPD_BIT' is used wrong here. The purpose of this
quirk is to tell the sdhci-driver that the IP-core doesn't have a "high-
speed-enable" bit in its registers.

With this commit we change this to the correct quirk:
SDHCI_QUIRK_BROKEN_HISPD_MODE

Signed-off-by: Hannes Schmelzer <hannes.schmelzer at br-automation.com>
---

Changes in v3: None
Changes in v2: None

 drivers/mmc/zynq_sdhci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c
index 9463a06..76fe97f 100644
--- a/drivers/mmc/zynq_sdhci.c
+++ b/drivers/mmc/zynq_sdhci.c
@@ -54,7 +54,7 @@ static int arasan_sdhci_probe(struct udevice *dev)
 		       SDHCI_QUIRK_BROKEN_R1B;
 
 #ifdef CONFIG_ZYNQ_HISPD_BROKEN
-	host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
+	host->quirks |= SDHCI_QUIRK_BROKEN_HISPD_MODE;
 #endif
 
 	host->max_clk = clock;
-- 
2.7.4