[U-Boot] [PATCH v1 12/16] arm: socfpga: stratix10: Add SPL driver for Stratix10 SoC
Ley Foon Tan
lftan.linux at gmail.com
Fri Apr 27 02:14:50 UTC 2018
On Thu, Apr 19, 2018 at 10:58 AM, Marek Vasut <marex at denx.de> wrote:
> On 04/19/2018 11:50 AM, Ley Foon Tan wrote:
>> Add SPL driver support for Stratix SoC
>>
>> Signed-off-by: Chin Liang See <chin.liang.see at intel.com>
>> Signed-off-by: Ley Foon Tan <ley.foon.tan at intel.com>
>> ---
>> arch/arm/mach-socfpga/Makefile | 4 +
>> arch/arm/mach-socfpga/include/mach/firewall_s10.h | 84 +++++++++
>> arch/arm/mach-socfpga/spl_s10.c | 205 +++++++++++++++++++++
>> 3 files changed, 293 insertions(+), 0 deletions(-)
>> create mode 100644 arch/arm/mach-socfpga/include/mach/firewall_s10.h
>> create mode 100644 arch/arm/mach-socfpga/spl_s10.c
>>
>> diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
>> index b669d43..35b124a 100644
>> --- a/arch/arm/mach-socfpga/Makefile
>> +++ b/arch/arm/mach-socfpga/Makefile
>> @@ -40,6 +40,7 @@ obj-y += system_manager_s10.o
>> obj-y += wrap_pinmux_config_s10.o
>> obj-y += wrap_pll_config_s10.o
>> endif
>> +
>> ifdef CONFIG_SPL_BUILD
>> ifdef CONFIG_TARGET_SOCFPGA_GEN5
>> obj-y += spl_gen5.o
>> @@ -51,6 +52,9 @@ endif
>> ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
>> obj-y += spl_a10.o
>> endif
>> +ifdef CONFIG_TARGET_SOCFPGA_STRATIX10
>> +obj-y += spl_s10.o
>> +endif
>> endif
>>
>> ifdef CONFIG_TARGET_SOCFPGA_GEN5
>> diff --git a/arch/arm/mach-socfpga/include/mach/firewall_s10.h b/arch/arm/mach-socfpga/include/mach/firewall_s10.h
>> new file mode 100644
>> index 0000000..70aa9a6
>> --- /dev/null
>> +++ b/arch/arm/mach-socfpga/include/mach/firewall_s10.h
>> @@ -0,0 +1,84 @@
>> +/* SPDX-License-Identifier: GPL-2.0
>> + *
>> + * Copyright (C) 2017-2018 Intel Corporation <www.intel.com>
>> + *
>> + */
>> +
>> +#ifndef _FIREWALL_S10_
>> +#define _FIREWALL_S10_
>> +
>> +struct socfpga_firwall_l4_per {
>> + u32 nand; /* 0x00 */
>> + u32 nand_data;
>> + u32 _pad_0x8;
>> + u32 usb0;
>> + u32 usb1; /* 0x10 */
>> + u32 _pad_0x14;
>> + u32 _pad_0x18;
>> + u32 spim0;
>> + u32 spim1; /* 0x20 */
>> + u32 spis0;
>> + u32 spis1;
>> + u32 emac0;
>> + u32 emac1; /* 0x30 */
>> + u32 emac2;
>> + u32 _pad_0x38;
>> + u32 _pad_0x3c;
>> + u32 sdmmc; /* 0x40 */
>> + u32 gpio0;
>> + u32 gpio1;
>> + u32 _pad_0x4c;
>> + u32 i2c0; /* 0x50 */
>> + u32 i2c1;
>> + u32 i2c2;
>> + u32 i2c3;
>> + u32 i2c4; /* 0x60 */
>> + u32 timer0;
>> + u32 timer1;
>> + u32 uart0;
>> + u32 uart1; /* 0x70 */
>> +};
>> +
>> +struct socfpga_firwall_l4_sys {
>> + u32 _pad_0x00; /* 0x00 */
>> + u32 _pad_0x04;
>> + u32 dma_ecc;
>> + u32 emac0rx_ecc;
>> + u32 emac0tx_ecc; /* 0x10 */
>> + u32 emac1rx_ecc;
>> + u32 emac1tx_ecc;
>> + u32 emac2rx_ecc;
>> + u32 emac2tx_ecc; /* 0x20 */
>> + u32 _pad_0x24;
>> + u32 _pad_0x28;
>> + u32 nand_ecc;
>> + u32 nand_read_ecc; /* 0x30 */
>> + u32 nand_write_ecc;
>> + u32 ocram_ecc;
>> + u32 _pad_0x3c;
>> + u32 sdmmc_ecc; /* 0x40 */
>> + u32 usb0_ecc;
>> + u32 usb1_ecc;
>> + u32 clock_manager;
>> + u32 _pad_0x50; /* 0x50 */
>> + u32 io_manager;
>> + u32 reset_manager;
>> + u32 system_manager;
>> + u32 osc0_timer; /* 0x60 */
>> + u32 osc1_timer;
>> + u32 watchdog0;
>> + u32 watchdog1;
>> + u32 watchdog2; /* 0x70 */
>> + u32 watchdog3;
>> +};
>> +
>> +#define FIREWALL_L4_DISABLE_ALL (BIT(0) | BIT(24) | BIT(16))
>> +#define FIREWALL_BRIDGE_DISABLE_ALL (~0)
>> +
>> +#define CCU_CPU0_MPRT_ADMASK_MEM_RAM0_ADDR 0xf7004688
>> +#define CCU_IOM_MPRT_ADMASK_MEM_RAM0_ADDR 0xf7018628
>> +
>> +#define CCU_ADMASK_P_MASK (BIT(0))
>> +#define CCU_ADMASK_NS_MASK (BIT(1))
>
> Drop outer parenthesis
Noted.
>
>> +
>> +#endif /* _FIREWALL_S10_ */
>> diff --git a/arch/arm/mach-socfpga/spl_s10.c b/arch/arm/mach-socfpga/spl_s10.c
>> new file mode 100644
>> index 0000000..3b3833d
>> --- /dev/null
>> +++ b/arch/arm/mach-socfpga/spl_s10.c
>> @@ -0,0 +1,205 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
>> + *
>> + */
>> +
>> +#include <common.h>
>> +#include <asm/io.h>
>> +#include <asm/u-boot.h>
>> +#include <asm/utils.h>
>> +#include <image.h>
>> +#include <asm/arch/reset_manager.h>
>> +#include <spl.h>
>> +#include <asm/arch/system_manager.h>
>> +#include <asm/arch/clock_manager.h>
>> +#include <asm/arch/sdram_s10.h>
>> +#include <asm/arch/mailbox_s10.h>
>> +#include <asm/arch/firewall_s10.h>
>> +#include <watchdog.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +static const struct socfpga_firwall_l4_per *firwall_l4_per_base =
>> + (struct socfpga_firwall_l4_per *)SOCFPGA_FIREWALL_L4_PER;
>> +static const struct socfpga_firwall_l4_sys *firwall_l4_sys_base =
>> + (struct socfpga_firwall_l4_sys *)SOCFPGA_FIREWALL_L4_SYS;
>> +static struct socfpga_system_manager *sysmgr_regs =
>> + (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
>> +
>> +u32 spl_boot_device(void)
>> +{
>> + /* TODO: Get from SDM or handoff */
>> + return BOOT_DEVICE_MMC1;
>> +}
>> +
>> +#ifdef CONFIG_SPL_MMC_SUPPORT
>> +u32 spl_boot_mode(const u32 boot_device)
>> +{
>> +#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
>> + return MMCSD_MODE_FS;
>> +#else
>> + return MMCSD_MODE_RAW;
>> +#endif
>> +}
>> +#endif
>> +
>> +void board_init_f(ulong dummy)
>> +{
>> + const struct cm_config *cm_default_cfg = cm_get_default_config();
>> +
>> +#ifdef CONFIG_HW_WATCHDOG
>> + /* Ensure watchdog is paused when debugging is happening */
>> + writel(SYSMGR_WDDBG_PAUSE_ALL_CPU, &sysmgr_regs->wddbg);
>> +
>> + /* Enable watchdog before initializing the HW */
>> + socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
>> + socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
>> + hw_watchdog_init();
>> +#endif
>> +
>> + /* ensure all processors are not released prior Linux boot */
>> + writeq(0, CPU_RELEASE_ADDR);
>> +
>> + socfpga_per_reset(SOCFPGA_RESET(OSC1TIMER0), 0);
>> + timer_init();
>> +
>> + populate_sysmgr_pinmux();
>> +
>> + /* configuring the HPS clocks */
>> + cm_basic_init(cm_default_cfg);
>> +
>> + /* enable console uart printing */
>> +#if (CONFIG_SYS_NS16550_COM1 == SOCFPGA_UART0_ADDRESS)
>
> Yoda notation, please fix. Also, shouldn't the reset controller handle
> this ?
Will remove this and use reset framework.
>
>> + socfpga_per_reset(SOCFPGA_RESET(UART0), 0);
>> + /* enables nonsecure access to UART0 */
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->uart0);
>> +#elif (CONFIG_SYS_NS16550_COM1 == SOCFPGA_UART1_ADDRESS)
>> + socfpga_per_reset(SOCFPGA_RESET(UART1), 0);
>> + /* enables nonsecure access to UART1 */
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->uart1);
>> +#endif
>> +
>> + preloader_console_init();
>> + cm_print_clock_quick_summary();
>
> This function doesn't fit on my pivoted 4k screen with small font, it is
> clearly too long. Please split it.
Okay, will split this function into sub-functions.
>
>> + /* enable non-secure interface to DMA330 DMA and peripherals */
>> + writel(SYSMGR_DMA_IRQ_NS | SYSMGR_DMA_MGR_NS, &sysmgr_regs->dma);
>> + writel(SYSMGR_DMAPERIPH_ALL_NS, &sysmgr_regs->dma_periph);
>> + /* enable DMA330 DMA */
>> + socfpga_per_reset(SOCFPGA_RESET(DMA), 0);
>> +
>> + /*
>> + * The following lines of code will enable non-secure access
>> + * to nand, usb, spi, emac, sdmmc, gpio, i2c, and timers. This
>> + * is needed as most OS run in non-secure mode. Thus we need to
>> + * enable non-secure access to these peripherals in order for the
>> + * OS to use these peripherals.
>> + */
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->nand);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->nand_data);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->usb0);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->usb1);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->spim0);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->spim1);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->emac0);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->emac1);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->emac2);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->sdmmc);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->sdmmc_ecc);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->gpio0);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->gpio1);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->i2c0);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->i2c1);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->i2c2);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->i2c3);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->i2c4);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->timer0);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_per_base->timer1);
>
> Turn this into a table ?
Okay.
>
>> + /* enables nonsecure access to clock mgr */
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->clock_manager);
>> +
>> + /* enables nonsecure access to reset mgr */
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->reset_manager);
>> +
>> + /* enables nonsecure access to system mgr */
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->system_manager);
>> +
>> + /* enables nonsecure access to OCRAM */
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->ocram_ecc);
>> +
>> + /* enables nonsecure access to all the emacs */
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->emac0rx_ecc);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->emac0tx_ecc);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->emac1rx_ecc);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->emac1tx_ecc);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->emac2rx_ecc);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->emac2tx_ecc);
>> +
>> + /* enables nonsecure access to SMMU */
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->io_manager);
>> +
>> + /* enables nonsecure access to watchdog */
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->watchdog0);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->watchdog1);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->watchdog2);
>> + writel(FIREWALL_L4_DISABLE_ALL, &firwall_l4_sys_base->watchdog3);
>> +
>> + /* enables SDMMC */
>> + socfpga_per_reset(SOCFPGA_RESET(SDMMC_OCP), 0);
>> + socfpga_per_reset(SOCFPGA_RESET(SDMMC), 0);
>> + /* enable usb0 and usb1 */
>> + socfpga_per_reset(SOCFPGA_RESET(USB0), 0);
>> + socfpga_per_reset(SOCFPGA_RESET(USB1), 0);
>> + socfpga_per_reset(SOCFPGA_RESET(USB0_OCP), 0);
>> + socfpga_per_reset(SOCFPGA_RESET(USB1_OCP), 0);
>> + /* enable SPIM1 */
>> + socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0);
>
> See below.
>
>> + /* disable lwsocf2fpga and soc2fpga bridge security */
>> + writel(FIREWALL_BRIDGE_DISABLE_ALL, SOCFPGA_FIREWALL_SOC2FPGA);
>> + writel(FIREWALL_BRIDGE_DISABLE_ALL, SOCFPGA_FIREWALL_LWSOC2FPGA);
>> +
>> + /* disable SMMU security */
>> + writel(FIREWALL_L4_DISABLE_ALL, SOCFPGA_FIREWALL_TCU);
>> +
>> + /* disable ocram security at CCU for non secure access */
>> + clrbits_le32(CCU_CPU0_MPRT_ADMASK_MEM_RAM0_ADDR,
>> + CCU_ADMASK_P_MASK | CCU_ADMASK_NS_MASK);
>> + clrbits_le32(CCU_IOM_MPRT_ADMASK_MEM_RAM0_ADDR,
>> + CCU_ADMASK_P_MASK | CCU_ADMASK_NS_MASK);
>> +
>> + /* enable i2c1 */
>> + socfpga_per_reset(SOCFPGA_RESET(I2C1), 0);
>> +
>> + /* Take GPIO0 & GPIO1 out of reset */
>> + socfpga_per_reset(SOCFPGA_RESET(GPIO0), 0);
>> + socfpga_per_reset(SOCFPGA_RESET(GPIO1), 0);
>
> Shouldn't this be done by the reset framework ?
Yes, will update DW GPIO to use reset framework.
>
>> + /* enable SPIM0 and SPIM1 */
>> + socfpga_per_reset(SOCFPGA_RESET(SPIM0), 0);
>> + socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0);
>
> You ungated this SPI block already like 20 lines above.
Will remove.
>
>> + puts("DDR: Initializing Hard Memory Controller\n");
>> + if (sdram_mmr_init_full(0)) {
>> + puts("DDR: Initialization failed.\n");
>> + hang();
>> + }
>> +
>> + gd->ram_size = sdram_calculate_size();
>> + printf("DDR: %d MiB\n", (int)(gd->ram_size >> 20));
>> +
>> + /* Sanity check ensure correct SDRAM size specified */
>> + puts("DDR: Running SDRAM size sanity check\n");
>> + if (get_ram_size(0, gd->ram_size) != gd->ram_size) {
>> + puts("DDR: SDRAM size check failed!\n");
>> + hang();
>> + }
>> + puts("DDR: SDRAM size check passed!\n");
>
> You can probably turn most of those ad-hoc prints into debug()s.
Noted.
>
>> +
>> +#ifdef CONFIG_CADENCE_QSPI
>> + mbox_init();
>> + mbox_qspi_open();
>> +#endif
>> +}
>>
>
>
> --
> Best regards,
> Marek Vasut
More information about the U-Boot
mailing list