[U-Boot] [PATCH] tools: zynqmpbif: Add support for load=after
Alexander Graf
agraf at suse.de
Thu Apr 26 11:37:39 UTC 2018
Some times it's handy to have a partition loaded immediately after
the end of the previous blob. The most obvious example for this is
a U-Boot binary (coming from .elf) and a device tree file.
This patch adds that logic. With this, the following bif snippet
does what you would expect:
[destination_cpu=a5x-0, exception_level=el-2] u-boot.elf
[load=after] u-boot.dtb
converts to
FSBL payload on CPU a5x-0 (PS):
Offset : 0x00590500
Size : 577768 (0x8d0e8) bytes
Load : 0x08000000
Attributes : EL2
Checksum : 0xefca2cad
FSBL payload on CPU none (PS):
Offset : 0x0061d640
Size : 129760 (0x1fae0) bytes
Load : 0x0808d0e8 (entry=0x00000000)
Attributes : EL3
Checksum : 0xf7dd3d49
Signed-off-by: Alexander Graf <agraf at suse.de>
---
tools/zynqmpbif.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/tools/zynqmpbif.c b/tools/zynqmpbif.c
index 6c8f66055d..47c233c15f 100644
--- a/tools/zynqmpbif.c
+++ b/tools/zynqmpbif.c
@@ -42,6 +42,7 @@ enum bif_flag {
BIF_FLAG_PUF_FILE,
BIF_FLAG_AARCH32,
BIF_FLAG_PART_OWNER_UBOOT,
+ BIF_FLAG_LOAD_AFTER,
/* Internal flags */
BIF_FLAG_BIT_FILE,
@@ -151,6 +152,11 @@ static char *parse_load(char *line, struct bif_entry *bf)
{
char *endptr;
+ if (!strncmp(line, "after", strlen("after"))) {
+ bf->flags |= (1ULL << BIF_FLAG_LOAD_AFTER);
+ return line + strlen("after");
+ }
+
bf->load = strtoll(line, &endptr, 0);
return endptr;
@@ -336,6 +342,15 @@ static int bif_add_part(struct bif_entry *bf, const char *data, size_t len)
if (r)
return r;
+ if (bf->flags & (1ULL << BIF_FLAG_LOAD_AFTER) &&
+ bif_output.last_part) {
+ struct partition_header *p = bif_output.last_part;
+ uint64_t load = le64_to_cpu(p->load_address);
+
+ load += le32_to_cpu(p->len) * 4;
+ parthdr.load_address = cpu_to_le64(load);
+ }
+
parthdr.offset = cpu_to_le32(bf->offset / 4);
if (bf->flags & (1ULL << BIF_FLAG_BOOTLOADER)) {
--
2.12.3
More information about the U-Boot
mailing list