[U-Boot] [PATCH v4 0/4] ARM: i.MX6: Add u-boot dtsi files

[Jagan Teki]

Stefano,

On Wed, Apr 11, 2018 at 6:02 PM, Jagan Teki <jagan at amarulasolutions.com> wrote:
> All CONFIG changes from arch/arm/mach-imx fromprevious version [1]
> since most of them won't agree with new naming convention that sync
> with Linux.
>
> This series add rest of changes like u-boot dtsi files for U-Boot
> definitions and arch/arm/boot/Makefile changes wrt imx.
>
> Changes for v4:
> - Drop patches related to CONFIG changes on arch/arm/mach-imx
> - Revised and rebased on master
>
> Changes for v3:
> - Drop patch "Change SYS_SOC from mx6 to imx6"
>
> Changes for v2:
> - Add new patch "ARM: dts: imx6ul-isiot: Move usdhc2 into dtsi"
> - Fixed *u-boot.dtsi files
> - Fixed board/logicpd/imx6/mx6q_2x_MT41K512M16HA.cfg to use imx6
>
> [1] https://patchwork.ozlabs.org/cover/890931/
>
> Jagan Teki (4):
>   ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot,dm-spl
>   ARM: dts: imx6ul-isiot: Move usdhc2 into dtsi
>   ARM: dts: i.MX6UL: U-Boot specific dts for u-boot,dm-spl
>   ARM: i.MX6: dts: Build dtb based on SOC type

Can you apply this if all OK?

Jagan.

-- 
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.