[U-Boot] Problem booting uImage with u-boot

[Michael Nazzareno Trimarchi]

Hi

On Wed, Aug 1, 2018 at 9:08 PM, Saeed Abdoli <saeed2957 at gmail.com> wrote:
> Hi Michael
> Thank you for your quick response.
> Can you please tell me how to solve the problem. Where can I change the
> relocation address, in kernel config or somewhere else?
>

If you not top-post and keep it posted it's better. What is your its
file for generate fit-image?

Michael

> Regards
> Saeed
>
> On Wed, 1 Aug 2018, 11:25 p.m. Michael Nazzareno Trimarchi,
> <michael at amarulasolutions.com> wrote:
>>
>> Hi
>>
>> On Wed, Aug 1, 2018 at 8:47 PM, Saeed Abdoli <saeed2957 at gmail.com> wrote:
>> > Hello
>> > I am working on a project in which I need to boot a customized linux
>> > kernel
>> > on my board. The board components are stm32f429 processor, 8Mbyte SDRAM
>> > and
>> > 32Mbyte flash memory which are connected to the processer via FMC. I've
>> > booted u-boot on the internal flash of the processor and I've installed
>> > the
>> > linux image (networking.uImage) which is provided by EMCRAFT using TFTP
>> > successfully. Then I tried to build my own linux image by editing the
>> > example provided by EMCRAFT (rootfs). But when I build the image and try
>> > to
>> > boot it, the processor can not boot the image and it resets
>> > unexpectedly.
>> > This is the message u-boot shows when trying to boot the image:
>> > ## Booting kernel from Legacy Image at d0007fc0 ...
>> >    Image Name:   Linux-4.2.0
>> >    Image Type:   ARM Linux Multi-File Image (uncompressed)
>> >    Data Size:    3945195 Bytes =  3.8 MB
>> >    Load Address: d0008000
>> >    Entry Point:  d0008001
>> >    Contents:
>> >       Image 0: 3932720 Bytes =  3.8 MB
>> >       Image 1: 12463 Bytes = 12.2 kB
>> >    Verifying Checksum ... OK
>> > ## Flattened Device Tree from multi component Image at D0007FC0
>> >    Booting using the fdt at 0xd03c823c
>> >    Loading Multi-File Image ... OK
>> > OK
>> > WARNING: legacy format multi component image overwritten
>> >    Loading Device Tree to d07f9000, end d07ff0ae ... OK
>> >
>> > Starting kernel ...
>> >
>> > After this message the processor resets.
>> > Can you please tell me what is wrong?
>> >
>>
>> > WARNING: legacy format multi component image overwritten
>> >    Loading Device Tree to d07f9000, end d07ff0ae ... OK
>>
>> Problem look like relocation address of fit image
>>
>> Michael
>>
>> > Regards
>> > _______________________________________________
>> > U-Boot mailing list
>> > U-Boot at lists.denx.de
>> > https://lists.denx.de/listinfo/u-boot
>>
>>
>>
>> --
>> | Michael Nazzareno Trimarchi                     Amarula Solutions BV |
>> | COO  -  Founder                                      Cruquiuskade 47 |
>> | +31(0)851119172                                 Amsterdam 1018 AM NL |
>> |                  [`as] http://www.amarulasolutions.com               |



-- 
| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
| COO  -  Founder                                      Cruquiuskade 47 |
| +31(0)851119172                                 Amsterdam 1018 AM NL |
|                  [`as] http://www.amarulasolutions.com               |