August 2018 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed Aug 1 00:15:07 UTC 2018
Ending: Fri Aug 31 23:57:06 UTC 2018
Messages: 3165

• [U-Boot] Get number of seconds since beginning of epoch   Jonas Mark (BT-FIR/ENG1)
• [U-Boot] Talos Security Advisory (TALOS-2018-0633/CVE-2018-3968 )   Regina Wilson (regiwils)
• [U-Boot] Unaligned memory accesses exception   Fernando AE
• [U-Boot] boot partition access at HS200 speed in eMMC   Faiz Abbas
• [U-Boot] boot partition access at HS200 speed in eMMC   Faiz Abbas
• [U-Boot] Problem booting uImage with u-boot   Saeed Abdoli
• [U-Boot] [PATCH v1 1/2] board: toradex: common: fail gracefully on missing NAND chip   Stefan Agner
• [U-Boot] [PATCH v1 2/2] colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support   Stefan Agner
• [U-Boot] [RESEND 1/3] imx: mx7: psci: add cpu hotplug support   Stefan Agner
• [U-Boot] [RESEND 2/3] imx: mx7: add gpc initialization for low power mode   Stefan Agner
• [U-Boot] [RESEND 3/3] imx: mx7: add system suspend/resume support   Stefan Agner
• [U-Boot] [RESEND 1/3] imx: mx7: psci: add cpu hotplug support   Stefan Agner
• [U-Boot] [RESEND 1/3] imx: mx7: psci: add cpu hotplug support   Stefan Agner
• [U-Boot] [RESEND PATCH V2 3/3] imx: mx7: add system suspend/resume support   Stefan Agner
• [U-Boot] [RESEND PATCH V2 3/3] imx: mx7: add system suspend/resume support   Stefan Agner
• [U-Boot] [PATCH] common: add board specific hook for os preboot config   Stefan Agner
• [U-Boot] [RESEND PATCH V2 3/3] imx: mx7: add system suspend/resume support   Stefan Agner
• [U-Boot] [PATCH 1/1] distro_bootcmd: Switch bootefi to use loadaddr by default.   Kristian Amlie
• [U-Boot] [PATCH 1/1] distro_bootcmd: Switch bootefi to use loadaddr by default.   Kristian Amlie
• [U-Boot] [PATCH 1/1] distro_bootcmd: Switch bootefi to use loadaddr by default.   Kristian Amlie
• [U-Boot] [RFC PATCH] arm: zynq: read mac address from SPI flash memory   Luis Araneda
• [U-Boot] [RFC PATCH] arm: zynq: read mac address from SPI flash memory   Luis Araneda
• [U-Boot] [U-Boot, u-boot, 2/2] clk: clk_meson: Add mux and div support for reparent and rate setting   Neil Armstrong
• [U-Boot] [PATCH u-boot 1/2] power: domain: Add the VPU Power Domain driver   Neil Armstrong
• [U-Boot] [PATCH v2 u-boot 0/2] Add the VPU Power Domain support   Neil Armstrong
• [U-Boot] [PATCH v2 u-boot 1/2] power: domain: Add the VPU Power Domain driver   Neil Armstrong
• [U-Boot] [PATCH v2 u-boot 2/2] clk: clk_meson: Add mux and div support for reparent and rate setting   Neil Armstrong
• [U-Boot] [PATCH v2 u-boot 1/2] power: domain: Add the VPU Power Domain driver   Neil Armstrong
• [U-Boot] [PATCH u-boot 1/3] boards: amlogic: remove ethernet gpio reset code from boards   Neil Armstrong
• [U-Boot] [PATCH u-boot 2/3] boards: amlogic: use common function for environment initialization   Neil Armstrong
• [U-Boot] [PATCH 01/11] imx: Add bootcmd to load and run UEFI from mmc   Stefano Babic
• [U-Boot] [PATCH 04/11] spl: imx: Add optional lds to keep SPL entirely in on-chip RAM   Stefano Babic
• [U-Boot] [RESEND PATCH V2 3/3] imx: mx7: add system suspend/resume support   Stefano Babic
• [U-Boot] [PATCH] imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PULL] Please pull u-boot-imx   Stefano Babic
• [U-Boot] [PATCH] configs: am57xx: change default board name to beagle_x15   Praneeth Bajjuri
• [U-Boot] [PATCH 0/2] Ethernet name length changes   Pankaj Bansal
• [U-Boot] [PATCH 1/2] fsl/mc: Limit the ethernet name to ETH_NAME_LEN   Pankaj Bansal
• [U-Boot] [PATCH 2/2] net: Increase ethernet name string size to 20 chars   Pankaj Bansal
• [U-Boot] [PATCH 0/2] Ethernet name length changes   Pankaj Bansal
• [U-Boot] Get Phy device ID for non standard phy   Pankaj Bansal
• [U-Boot] Get Phy device ID for non standard phy   Pankaj Bansal
• [U-Boot] Get Phy device ID for non standard phy   Pankaj Bansal
• [U-Boot] [PATCH v2 2/2] board: sunxi: sun8i-v40: Add Bananapi M2 Berry support   Alan Beard
• [U-Boot] [PATCH 01/11] imx: Add bootcmd to load and run UEFI from mmc   Henry Beberman
• [U-Boot] [PATCH 04/11] spl: imx: Add optional lds to keep SPL entirely in on-chip RAM   Henry Beberman
• [U-Boot] [PATCH u-boot-marvell v2 00/12] Updates for Turris Mox   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v2 01/12] phy: marvell: Support changing SERDES map in board file   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v2 02/12] clk: armada-37xx-periph: Support changing clock parent and rate   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v2 03/12] board: turris_mox: Fix watchdog macro name   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v2 04/12] board: turris_mox: Fixup U-Boot's device tree if PCIe connected   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v2 05/12] board: turris_mox: Enable PCI in defconfig   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v2 06/12] board: turris_mox: Cosmetic restructurization   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v2 07/12] board: turris_mox: Change SERDES map depending on module topology   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v2 08/12] board: turris_mox: Check and configure modules   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v2 09/12] board: turris_mox: Setup Linux's device tree before boot   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v2 10/12] board: turris_mox: Add gpio command to defconfig   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v2 11/12] arch/arm/dts: Update Turris Mox device tree   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v2 12/12] arch/arm/mvebu: Support 1 GB version of Turris Mox   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 04/12] board: turris_mox: Fixup U-Boot's device tree if PCIe connected   Marek Behún
• [U-Boot] [PATCH v6 1/8] armv8: fsl-layerscape: add missing register blocks base address defines   Bharat Bhushan
• [U-Boot] [PATCH v6 2/8] armv8: ls1046a: advertise QMan v3 in configuration   Bharat Bhushan
• [U-Boot] [PATCH v6 3/8] misc: fsl_portals: setup QMAN_BAR{E} also on ARM platforms   Bharat Bhushan
• [U-Boot] [PATCH v6 4/8] armv8: fsl-layerscape: add missing debug stream ID   Bharat Bhushan
• [U-Boot] [PATCH v6 5/8] armv8: ls1046a: initial icid setup support   Bharat Bhushan
• [U-Boot] [PATCH v6 6/8] armv8: ls1046a: add icid setup for qman portals   Bharat Bhushan
• [U-Boot] [PATCH v6 7/8] armv8: ls1046a: setup fman ports ICIDs and device tree   Bharat Bhushan
• [U-Boot] [PATCH v6 8/8] armv8: ls1046a: setup SEC ICIDs and fix up device tree   Bharat Bhushan
• [U-Boot] [PATCH 1/1] elf: Add support for PPC64 ELF V1 ABI in bootelf   Rob Bracero
• [U-Boot] [PATCH v6 00/27] SPI-NAND support   Boris Brezillon
• [U-Boot] [PATCH 1/4] spi: spi-mem: Add optional half-duplex SPI transfer mode   Boris Brezillon
• [U-Boot] [PATCH 2/4] mtd: nand: Don't abort erase operation when a bad block is detected   Boris Brezillon
• [U-Boot] [PATCH 3/4] cmd: mtd: Don't use with negative return codes for shell commands   Boris Brezillon
• [U-Boot] [PATCH 4/4] cmd: mtd: Add info text to mtd erase subcommand   Boris Brezillon
• [U-Boot] [PATCH v6 00/27] SPI-NAND support   Boris Brezillon
• [U-Boot] [PATCH 1/4] spi: spi-mem: Add optional half-duplex SPI transfer mode   Boris Brezillon
• [U-Boot] [PATCH 2/4 v2] cmd: mtd: Don't abort erase operation when a bad block is detected   Boris Brezillon
• [U-Boot] [PATCH 1/4 v2] spi: spi-mem: Use 2 SPI messages instead of a single full-duplex one   Boris Brezillon
• [U-Boot] [PATCH 3/4 v2] cmd: mtd: Don't use with negative return codes for shell commands   Boris Brezillon
• [U-Boot] [PATCH 4/4 v2] cmd: mtd: Add info text to mtd erase subcommand   Boris Brezillon
• [U-Boot] [PATCH v6 06/31] mtd: fix build issue with includes   Boris Brezillon
• [U-Boot] [PATCH v6 04/31] mtd: Fallback to ->_read/write() when ->_read/write_oob() is missing   Boris Brezillon
• [U-Boot] [PATCH v6 20/31] mtd: declare MTD_PARTITIONS symbol in Kconfig   Boris Brezillon
• [U-Boot] [PATCH v6 22/31] cmd: ubi: delete useless and misleading definitions   Boris Brezillon
• [U-Boot] [PATCH v6 24/31] cmd: mtdparts: accept spi-nand devices   Boris Brezillon
• [U-Boot] [PATCH v6 06/31] mtd: fix build issue with includes   Boris Brezillon
• [U-Boot] [PATCH v6 27/31] mtd: move mtdparts_init() declaration   Boris Brezillon
• [U-Boot] [PATCH v6 28/31] mtd: mtdpart: implement proper partition handling   Boris Brezillon
• [U-Boot] [PATCH v6 29/31] cmd: mtd: add 'mtd' command   Boris Brezillon
• [U-Boot] [PATCH v6 00/31] SPI-NAND support   Boris Brezillon
• [U-Boot] [PATCH v6 25/31] cmd: mtdparts: add a generic 'mtdparts' parser   Boris Brezillon
• [U-Boot] [PATCH v6 30/31] cmd: mtdparts: try to probe the MTD devices as a fallback   Boris Brezillon
• [U-Boot] [PATCH v6 31/31] cmd: ubi: clean the partition handling   Boris Brezillon
• [U-Boot] [PATCH v6 29/31] cmd: mtd: add 'mtd' command   Boris Brezillon
• [U-Boot] [PATCH v6 29/31] cmd: mtd: add 'mtd' command   Boris Brezillon
• [U-Boot] [PATCH v6 29/31] cmd: mtd: add 'mtd' command   Boris Brezillon
• [U-Boot] [PATCH] EMDK: Enable bootelf   Alexey Brodkin
• [U-Boot] [PATCH] ram: stm32_sdram: Adds stm32f746-disco fix for HardFault at booting   Patrice CHOTARD
• [U-Boot] [PATCH] ram: stm32_sdram: Adds stm32f746-disco fix for HardFault at booting   Patrice CHOTARD
• [U-Boot] [PATCH] stm32f7: board: Fix memory init   Patrice CHOTARD
• [U-Boot] [PATCH v2 1/3] dm: serial: Replace setparity by setconfig   Patrice CHOTARD
• [U-Boot] [PATCH v2 3/3] sandbox: Add serial test   Patrice CHOTARD
• [U-Boot] [PATCH v2 2/3] serial: stm32: Replace setparity by setconfig   Patrice CHOTARD
• [U-Boot] [PATCH v1 1/5] dm: gpio: Add get_function_number ops   Patrice CHOTARD
• [U-Boot] [U-Boot, v4, 9/9] ARM: dts: stm32: remove cd-inverted for stm32f746-disco   Patrice CHOTARD
• [U-Boot] [U-Boot,v2,6/6] ARM: dts: stm32mp157: Add ADC DT node   Patrice CHOTARD
• [U-Boot] [PATCH] ARM: dts: stm32f4: Fix DT dtc warnings   Patrice CHOTARD
• [U-Boot] [PATCH] phy: Fix off-by-one error when parsing DT PHY bindings   Patrice CHOTARD
• [U-Boot] [PATCH] usb: ehci-generic: Add vbus-supply regulator support   Patrice CHOTARD
• [U-Boot] [Uboot-stm32] [PATCH v2 1/5] dm: gpio: Add get_alternate_function ops   Patrice CHOTARD
• [U-Boot] [Uboot-stm32] [PATCH v2 4/5] gpio: sandbox: Rename GPIOF_(OUTPUT|HIGH|ODR) to SDBX_GPIO_(OUTPUT|HIGH|ODR)   Patrice CHOTARD
• [U-Boot] [PATCH v2] usb: ehci-generic: Add vbus-supply regulator support   Patrice CHOTARD
• [U-Boot] [PATCH v2] usb: ehci-generic: Add vbus-supply regulator support   Patrice CHOTARD
• [U-Boot] u-boot-rockchip: firefly-rk3288 hangs on: Loading Environment from MMC   Vagrant Cascadian
• [U-Boot] u-boot-rockchip: firefly-rk3288 hangs on: Loading Environment from MMC   Vagrant Cascadian
• [U-Boot] u-boot-rockchip: firefly-rk3288 hangs on: Loading Environment from MMC   Vagrant Cascadian
• [U-Boot] [PATCH] Revert "Revert "fdt_support: Use CONFIG_NR_DRAM_BANKS if defined""   Vagrant Cascadian
• [U-Boot] [PATCH] Revert "Revert "fdt_support: Use CONFIG_NR_DRAM_BANKS if defined""   Vagrant Cascadian
• [U-Boot] [PATCH 1/1] riscv: allow native compilation   Rick Chen
• [U-Boot] [PATCH v2 0/3] Replace serial setparity by setconfig   Patrice Chotard
• [U-Boot] [PATCH v2 1/3] dm: serial: Replace setparity by setconfig   Patrice Chotard
• [U-Boot] [PATCH v2 2/3] serial: stm32: Replace setparity by setconfig   Patrice Chotard
• [U-Boot] [PATCH v2 3/3] sandbox: Add serial test   Patrice Chotard
• [U-Boot] [PATCH v1 0/5] Add get_function_number ops   Patrice Chotard
• [U-Boot] [PATCH v1 1/5] dm: gpio: Add get_function_number ops   Patrice Chotard
• [U-Boot] [PATCH v1 2/5] gpio: stm32f7: Add ops get_function   Patrice Chotard
• [U-Boot] [PATCH v1 3/5] gpio: stm32f7: Add ops get_function_number   Patrice Chotard
• [U-Boot] [PATCH v1 4/5] gpio: sandbox: Rename GPIOF_(OUTPUT|HIGH|ODR) to SDBX_GPIO_(OUTPUT|HIGH|ODR)   Patrice Chotard
• [U-Boot] [PATCH v1 5/5] test: dm: Add gpio get_function_number ops test   Patrice Chotard
• [U-Boot] [PATCH] stm32f7: board: Fix memory init   Patrice Chotard
• [U-Boot] [PATCH v1 00/11] Update STM32 MCU configs   Patrice Chotard
• [U-Boot] [PATCH v1 01/11] board: stm32: use bi_dram[0].start instead of hardcoded value   Patrice Chotard
• [U-Boot] [PATCH v1 02/11] configs: stm32fxxx: Remove CONFIG_SYS_CLK_FREQ   Patrice Chotard
• [U-Boot] [PATCH v1 03/11] configs: stm32f429-disco: Remove CONFIG_SYS_RAM_CS   Patrice Chotard
• [U-Boot] [PATCH v1 04/11] configs: stm32f4xx: Enable ICACHE and DCACHE   Patrice Chotard
• [U-Boot] [PATCH v1 05/11] configs: stm32f746-disco: Migrate CONFIG_CMD_CACHE to defconfig   Patrice Chotard
• [U-Boot] [PATCH v1 06/11] configs: stm32h7xx: Migrate CONFIG_CMD_CACHE to defconfig   Patrice Chotard
• [U-Boot] [PATCH v1 07/11] configs: stm32f4xx: Remove CONFIG_SYS_RAM_FREQ_DIV   Patrice Chotard
• [U-Boot] [PATCH v1 08/11] configs: stm32h743-evaluation: Add DISTRO_DEFAULT support   Patrice Chotard
• [U-Boot] [PATCH v1 09/11] configs: stm32h743-discovery: Add DISTRO_DEFAULT support   Patrice Chotard
• [U-Boot] [PATCH v1 10/11] configs: stm32f469-discovery: Add DISTRO_DEFAULT support   Patrice Chotard
• [U-Boot] [PATCH v1 11/11] configs: stm32f429-evaluation: Add DISTRO_DEFAULT support   Patrice Chotard
• [U-Boot] [PATCH v2] stm32f7: board: Fix memory init   Patrice Chotard
• [U-Boot] [PATCH v3 0/4] Replace serial setparity by setconfig   Patrice Chotard
• [U-Boot] [PATCH v3 1/4] dm: serial: Replace setparity by setconfig   Patrice Chotard
• [U-Boot] [PATCH v3 2/4] serial: stm32: Replace setparity by setconfig   Patrice Chotard
• [U-Boot] [PATCH v3 3/4] dm: serial: Remove setparity ops   Patrice Chotard
• [U-Boot] [PATCH v3 4/4] sandbox: Add serial test   Patrice Chotard
• [U-Boot] [PATCH v2 0/5] Add get_alternate_function ops   Patrice Chotard
• [U-Boot] [PATCH v2 1/5] dm: gpio: Add get_alternate_function ops   Patrice Chotard
• [U-Boot] [PATCH v2 2/5] gpio: stm32f7: Add ops get_function   Patrice Chotard
• [U-Boot] [PATCH v2 3/5] gpio: stm32f7: Add ops get_alternate_function   Patrice Chotard
• [U-Boot] [PATCH v2 4/5] gpio: sandbox: Rename GPIOF_(OUTPUT|HIGH|ODR) to SDBX_GPIO_(OUTPUT|HIGH|ODR)   Patrice Chotard
• [U-Boot] [PATCH v2 5/5] test: dm: Add gpio get_alternate_function ops test   Patrice Chotard
• [U-Boot] [PATCH 0/2] Remove DT cd-inverted property for stm32f7   Patrice Chotard
• [U-Boot] [PATCH 1/2] ARM: dts: stm32: remove cd-inverted for stm32f769-disco   Patrice Chotard
• [U-Boot] [PATCH 2/2] ARM: dts: stm32: remove cd-inverted for stm32f746-disco   Patrice Chotard
• [U-Boot] [PATCH] ARM: dts: stm32mp157: Add ADC DT node   Patrice Chotard
• [U-Boot] [PATCH] ARM: dts: stm32f4: Fix DT dtc warnings   Patrice Chotard
• [U-Boot] [PATCH] MAINTAINERS: Update STM32MP fragments   Patrice Chotard
• [U-Boot] [PATCH] usb: ehci-generic: Add vbus-supply regulator support   Patrice Chotard
• [U-Boot] [PATCH v2] usb: ehci-generic: Add vbus-supply regulator support   Patrice Chotard
• [U-Boot] [PATCH] gpio: stm32f7: replace ODR update by BSRR write   Patrice Chotard
• [U-Boot] [PATCH v3] usb: ehci-generic: Add vbus-supply regulator support   Patrice Chotard
• [U-Boot] [PATCH v1 0/4] Add USB EHCI and gadget support for STM32MP1   Patrice Chotard
• [U-Boot] [PATCH v1 1/4] ARM: dts: stm32mp1: Add usb gadget support for stm32mp157c-ev1 board   Patrice Chotard
• [U-Boot] [PATCH v1 2/4] ARM: dts: stm32mp1: Add EHCI support for stm32mp157c-ev1 board   Patrice Chotard
• [U-Boot] [PATCH v1 3/4] configs: stm32mp15: Enable USB relative flags   Patrice Chotard
• [U-Boot] [PATCH v1 4/4] board: st: stm32mp1: Add usb gadget support   Patrice Chotard
• [U-Boot] [PATCH] configs: sama5d2_xplained: Add defconfig for ENV/boot from eMMC   Codrin Ciubotariu
• [U-Boot] [PATCH 0/3] configs: sama5d27_som1_ek: Cleanup and new   Codrin Ciubotariu
• [U-Boot] [PATCH 1/3] configs: sama5d27_som1_ek: Remove unnecessary FAT_ENV_xxx macros   Codrin Ciubotariu
• [U-Boot] [PATCH 2/3] configs: sama5d27_som1_ek: Set CONFIG_BOOTARGS using Kconfig   Codrin Ciubotariu
• [U-Boot] [PATCH 3/3] configs: sama5d27_som1_ek: Add defconfig for ENV/boot from uSD   Codrin Ciubotariu
• [U-Boot] UNDEF_SYM   LIU Tim - Contractor
• [U-Boot] [PATCH 3/9] common: include <inttypes.h> always   Patrick DELAUNAY
• [U-Boot] [PATCH 6/9] ram: stm32mp1: use PRIx64 macros for printing ram size   Patrick DELAUNAY
• [U-Boot] [PATCH] fs/fat: debug-print file read position during file_fat_read_at()   Andreas Dannenberg
• [U-Boot] [PATCH] fs/fat: debug-print file read position during file_fat_read_at()   Andreas Dannenberg
• [U-Boot] [PATCH 11/25] clk: Allow clock defaults to be set also during re-reloc state   Andreas Dannenberg
• [U-Boot] [PATCH 11/25] clk: Allow clock defaults to be set also during re-reloc state   Andreas Dannenberg
• [U-Boot] [PATCH 11/25] clk: Allow clock defaults to be set also during re-reloc state   Andreas Dannenberg
• [U-Boot] [U-Boot, v4, 7/7] net: gmac_rockchip: Add handeling for RGMII_ID/RXID/TXID   David.Wu
• [U-Boot] [U-Boot, v4, 6/7] net: gmac_rockchip: Fix a register write in rk3328_gmac_set_to_rgmii   David.Wu
• [U-Boot] [Resend] [U-Boot, v4, 7/7] net: gmac_rockchip: Add handeling for RGMII_ID/RXID/TXID   David.Wu
• [U-Boot] [PATCH v3 1/1] avb2.0: add get_size_of_partition()   Andrew F. Davis
• [U-Boot] [PATCH] configs: am57xx: change default board name to beagle_x15   Andrew F. Davis
• [U-Boot] [PATCH 0/4] Solve issue with serial rx buffer when MUX is deactivated   Patrick Delaunay
• [U-Boot] [PATCH 1/4] stm32mp1: activate serial rx buffer   Patrick Delaunay
• [U-Boot] [PATCH 2/4] serial: protect access to serial rx buffer   Patrick Delaunay
• [U-Boot] [PATCH 3/4] console: unify fgetc function when console MUX is deactivated   Patrick Delaunay
• [U-Boot] [PATCH 4/4] cli: handle getch error   Patrick Delaunay
• [U-Boot] Get number of seconds since beginning of epoch   Wolfgang Denk
• [U-Boot] [PATCH] common: Increase LOGLEVEL back to 6   Wolfgang Denk
• [U-Boot] [PATCH] Kirkwood: NAS220: remove bootdelay from CONFIG_EXTRA_ENV_SETTINGS   Evgeni Dobrev
• [U-Boot] [PATCH] drivers: esdhc: add support for coldfire mcf5441x family   Angelo Dureghello
• [U-Boot] [PATCH] m68k: fix multiple memory accesses on swap operations   Angelo Dureghello
• [U-Boot] [PATCH] m68k: ColdFire mcf5441x, add eSDHC support   Angelo Dureghello
• [U-Boot] [PATCH v3] drivers: spi: migrate cf_spi to DM   Angelo Dureghello
• [U-Boot] [PATCH] drivers: esdhc: add support for coldfire mcf5441x family   Angelo Dureghello
• [U-Boot] [PATCH v2] drivers: esdhc: add support for ColdFire mcf5441x family   Angelo Dureghello
• [U-Boot] [PATCH v4] spi: Add SPI driver for MT76xx SoCs   Piotr Dymacz
• [U-Boot] [PATCH] ARM: display5: config: Replace hardcoded size of kernel (0x2000) with variable (fitImg_fw_sz)   Fabio Estevam
• [U-Boot] [PATCH V3 32/32] imx: add i.MX8QXP MEK board support   Fabio Estevam
• [U-Boot] Booting into winCE .nb0 without access to source files   Fabio Estevam
• [U-Boot] [RESEND PATCH V2 3/3] imx: mx7: add system suspend/resume support   Fabio Estevam
• [U-Boot] [PATCH] wandboard: README: Include the mx6qp variant in the list   Fabio Estevam
• [U-Boot] [PATCH] spl: Kconfig: Fix typo in 'Upgrade'   Fabio Estevam
• [U-Boot] [PATCH 11/15] efi_loader: capitalization table   Mike FABIAN
• [U-Boot] [PATCH v3 03/10] video: add support of MIPI DSI interface   Yannick FERTRE
• [U-Boot] [PATCH] board: arm: Add support for Broadcom BCM7260   Florian Fainelli
• [U-Boot] [PATCH] arm: bcm7445: Move config defines to bcm7445.h   Florian Fainelli
• [U-Boot] [PATCH V3 00/32] i.MX: Add i.MX8QXP support   Peng Fan
• [U-Boot] [PATCH V3 01/32] dt-bindings: pinctrl: add i.MX8QXP pads definition   Peng Fan
• [U-Boot] [PATCH V3 02/32] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QXP clocks definition   Peng Fan
• [U-Boot] [PATCH V3 03/32] dt-bindings: soc: add i.MX8QXP pm and rsrc definition   Peng Fan
• [U-Boot] [PATCH V3 04/32] imx8: add scfw macro definition   Peng Fan
• [U-Boot] [PATCH V3 05/32] imx: add Kconfig entry for i.MX8QXP   Peng Fan
• [U-Boot] [PATCH V3 06/32] arm: build mach-imx for i.MX8   Peng Fan
• [U-Boot] [PATCH V3 07/32] misc: add i.MX8 misc driver   Peng Fan
• [U-Boot] [PATCH V3 08/32] misc: imx8: add scfw api impementation   Peng Fan
• [U-Boot] [PATCH V3 09/32] arm: global_data: add scu_dev for i.MX8   Peng Fan
• [U-Boot] [PATCH V3 10/32] imx: boot_mode: Add FLEXSPI boot entry   Peng Fan
• [U-Boot] [PATCH V3 11/32] imx8: add imx-regs header file   Peng Fan
• [U-Boot] [PATCH V3 12/32] imx8: pins: include i.MX8QXP pin header when CONFIG_IMX8QXP defined   Peng Fan
• [U-Boot] [PATCH V3 13/32] imx: add i.MX8 cpu type   Peng Fan
• [U-Boot] [PATCH V3 14/32] armv8: add cpu core helper functions   Peng Fan
• [U-Boot] [PATCH V3 15/32] imx8: add basic cpu support   Peng Fan
• [U-Boot] [PATCH V3 16/32] imx8: add boot device detection   Peng Fan
• [U-Boot] [PATCH V3 17/32] imx8: implement mmc_get_env_dev   Peng Fan
• [U-Boot] [PATCH V3 18/32] imx8: add mmu and dram related functiions   Peng Fan
• [U-Boot] [PATCH V3 19/32] imx8: add arch_cpu_init arch_cpu_init_dm   Peng Fan
• [U-Boot] [PATCH V3 20/32] imx8: add iomux configuration api   Peng Fan
• [U-Boot] [PATCH V3 21/32] imx8: add dummy clock   Peng Fan
• [U-Boot] [PATCH V3 22/32] gpio: mxc_gpio: add support for i.MX8   Peng Fan
• [U-Boot] [PATCH V3 23/32] pinctrl: Add pinctrl driver for i.MX8   Peng Fan
• [U-Boot] [PATCH V3 24/32] power: Add power domain driver for i.MX8   Peng Fan
• [U-Boot] [PATCH V3 25/32] clk: imx: add clk driver for i.MX8QXP   Peng Fan
• [U-Boot] [PATCH V3 26/32] serial_lpuart: Update lpuart driver to support i.MX8   Peng Fan
• [U-Boot] [PATCH V3 27/32] serial: lpuart: Enable RX and TX FIFO   Peng Fan
• [U-Boot] [PATCH V3 28/32] serial: lpuart: support uclass clk api   Peng Fan
• [U-Boot] [PATCH V3 29/32] fsl_esdhc: Update usdhc driver to support i.MX8   Peng Fan
• [U-Boot] [PATCH V3 30/32] mmc: fsl_esdhc: add uclass clk support   Peng Fan
• [U-Boot] [PATCH V3 31/32] arm: dts: introduce dtsi for i.MX8QXP   Peng Fan
• [U-Boot] [PATCH V3 32/32] imx: add i.MX8QXP MEK board support   Peng Fan
• [U-Boot] [PATCH V2 1/4] power-domain: add dummy functions when CONFIG_POWER_DOMAIN not defined   Peng Fan
• [U-Boot] [PATCH V2] drivers: regulator: fixed: add u-boot, off-on-delay-us   Peng Fan
• [U-Boot] [PATCH 1/2] i2c-mux: pca954x: support pca9646 i2c switch   Peng Fan
• [U-Boot] [PATCH V3 07/32] misc: add i.MX8 misc driver   Peng Fan
• [U-Boot] [PATCH V3 1/2] mmc: add HS400 support   Peng Fan
• [U-Boot] [PATCH V4 1/2] mmc: add HS400 support   Peng Fan
• [U-Boot] [PATCH V4 2/2] mmc: fsl_esdhc: enable HS400 feature   Peng Fan
• [U-Boot] [PATCH V4 1/2] mmc: add HS400 support   Peng Fan
• [U-Boot] [PATCH v3 00/10] splash screen on the stm32f769 disco board   Yannick Fertré
• [U-Boot] [PATCH v3 01/10] video: stm32: stm32_ltdc: add bridge to display controller   Yannick Fertré
• [U-Boot] [PATCH v3 02/10] include: Add new DCS commands in the enum list   Yannick Fertré
• [U-Boot] [PATCH v3 03/10] video: add support of MIPI DSI interface   Yannick Fertré
• [U-Boot] [PATCH v3 04/10] video: add MIPI DSI host controller bridge   Yannick Fertré
• [U-Boot] [PATCH v3 05/10] video: add support of STM32 MIPI DSI controller driver   Yannick Fertré
• [U-Boot] [PATCH v3 06/10] video: add support of panel OTM8009A   Yannick Fertré
• [U-Boot] [PATCH v3 07/10] video: add support of panel RM68200   Yannick Fertré
• [U-Boot] [PATCH v3 08/10] arm: dts: stm32: add dsi for STM32F746   Yannick Fertré
• [U-Boot] [PATCH v3 09/10] arm: dts: stm32: add display for STM32F769 disco board   Yannick Fertré
• [U-Boot] [PATCH v3 10/10] board: Add STM32F769 SoC, discovery board support   Yannick Fertré
• [U-Boot] [PATCH] board: arm: bcmstb: Declare get_ticks in timer.h   Thomas Fitzsimmons
• [U-Boot] [PATCH] board: arm: Add support for Broadcom BCM7260   Thomas Fitzsimmons
• [U-Boot] [PATCH v2 0/2] board: arm: Add support for Broadcom BCM7260   Thomas Fitzsimmons
• [U-Boot] [PATCH v2 1/2] arm: bcm7445: Change serial console index   Thomas Fitzsimmons
• [U-Boot] [PATCH v2 2/2] board: arm: Add support for Broadcom BCM7260   Thomas Fitzsimmons
• [U-Boot] [PATCH] board: arm: Add support for Broadcom BCM7260   Thomas Fitzsimmons
• [U-Boot] Is there a omap_gpmc.c maintainer?   Adam Ford
• [U-Boot] [PATCH] Convert CONFIG_USB_ULPI_TIMEOUT to Kconfig   Adam Ford
• [U-Boot] [PATCH] Convert CONFIG_VIDEO_OMAP3 to Kconfig   Adam Ford
• [U-Boot] [PATCH V2] Convert CONFIG_USB_ULPI_TIMEOUT to Kconfig   Adam Ford
• [U-Boot] [PATCH] Convert CONFIG_USB_ULPI_TIMEOUT to Kconfig   Adam Ford
• [U-Boot] [PATCH] arm: armv7-a: Enable mtune when CONFIG_CPU_V7A   Adam Ford
• [U-Boot] armv5 and OMAP3 Question   Adam Ford
• [U-Boot] armv5 and OMAP3 Question   Adam Ford
• [U-Boot] armv5 and OMAP3 Question   Adam Ford
• [U-Boot] armv5 and OMAP3 Question   Adam Ford
• [U-Boot] [PATCH] arm: armv7-a: Compile and tune for armv7-a instead of armv5   Adam Ford
• [U-Boot] MMC_DAVINCI not compliant with CONFIG_BLK   Adam Ford
• [U-Boot] DM_SPI, DM_SPI_FLASH due 2018.09   Adam Ford
• [U-Boot] [PATCHv2 2/2] Convert all of CONFIG_CONS_INDEX to Kconfig   Adam Ford
• [U-Boot] [PATCH] Convert CONFIG_TWL4030_LED et al to Kconfig   Adam Ford
• [U-Boot] MMC_DAVINCI not compliant with CONFIG_BLK   Adam Ford
• [U-Boot] MMC_DAVINCI not compliant with CONFIG_BLK   Adam Ford
• [U-Boot] MMC_DAVINCI not compliant with CONFIG_BLK   Adam Ford
• [U-Boot] [PATCH] Removed unused references to CONFIG_SERIALx   Adam Ford
• [U-Boot] [PATCH] arm: omap: configs: various: Remove references to OMAP34XX_UARTx   Adam Ford
• [U-Boot] [PATCH v4] spi: davinci: Full dm conversion   Adam Ford
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Adam Ford
• [U-Boot] MMC_DAVINCI not compliant with CONFIG_BLK   Adam Ford
• [U-Boot] [PATCH 1/3] MMC: Enable DM_MMC for Davinci   Adam Ford
• [U-Boot] [PATCH 2/3] ARM: davinci: da850evm: Support DM_MMC   Adam Ford
• [U-Boot] [PATCH 3/3] ARM: davinci: omapl138_lcdk: Enable DM_MMC   Adam Ford
• [U-Boot] [PATCH] omap3_logic: Fix CONS_INDEX   Adam Ford
• [U-Boot] [PATCH 5/6] serial: ns16550: fix debug uart putc called before init   Adam Ford
• [U-Boot] [PATCH] Convert CONFIG_SYS_I2C_DAVINCI to Kconfig   Adam Ford
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Adam Ford
• [U-Boot] [PATCH] configs: da850evm: Remove DM_I2C_COMPAT   Adam Ford
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Adam Ford
• [U-Boot] [PATCH] serial: omap: Introduce DM specific omap serial   Adam Ford
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Adam Ford
• [U-Boot] [PATCH] ARM: da850evm: Enable USE_TINY_PRINTF   Adam Ford
• [U-Boot] [PATCH] ARM: da850evm: Enable SPL_SYS_MALLOC_SIMPLE   Adam Ford
• [U-Boot] [PATCH] ARM: da8xxevm: README: Add NOR booting instructions   Adam Ford
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Adam Ford
• [U-Boot] [PATCH] ARM: configs: Add da850evm_nand to boot from NAND   Adam Ford
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Adam Ford
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Adam Ford
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Adam Ford
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Adam Ford
• [U-Boot] [PATCH] ARM: da850evm_direct_nor: Enable CONFIG_BLK   Adam Ford
• [U-Boot] [PATCH] ARM: da850evm_direct_nor_defconfig: Enable DM_SERIAL   Adam Ford
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Adam Ford
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Adam Ford
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Adam Ford
• [U-Boot] [PATCH V2] ARM: configs: Add da850evm_nand to boot from NAND   Adam Ford
• [U-Boot] [PATCH] ARM: CPU: arm926ejs: Consolidate cache routines to common file   Adam Ford
• [U-Boot] [PATCH] DM: GPIO: Fix da8xx GPIO indexing over GPIO 32   Adam Ford
• [U-Boot] [PATCH] dm: gpio: da8xx_gpio: Add support for GPIO_ACTIVE_LOW/HIGH   Adam Ford
• [U-Boot] [PATCH] MMC: davinici_mmc: Enable CD and WP with DM and OF_CONTROL   Adam Ford
• [U-Boot] [PATCH] configs: Migrate CONFIG_NR_DRAM_BANKS   Adam Ford
• [U-Boot] [PATCH] arm: dts: da850: Re-sync da850-evm.dts from Linux 4.18   Adam Ford
• [U-Boot] [PATCH] ARM: dts: da850-evm-u-boot: Remove redundant entries   Adam Ford
• [U-Boot] [PATCH] GPIO: omap_gpio: Fix gpio name names with device tree   Adam Ford
• [U-Boot] Disabling CONFIG_DM_I2C_COMPAT in twl4030 PMIC   Adam Ford
• [U-Boot] Disabling CONFIG_DM_I2C_COMPAT in twl4030 PMIC   Adam Ford
• [U-Boot] [PATCH 1/2] Configs: am3517_evm: Remove TWL4030 reference   Adam Ford
• [U-Boot] [PATCH 2/2] ARM: am3517_evm: Disable DM_I2C_COMPAT   Adam Ford
• [U-Boot] Disabling CONFIG_DM_I2C_COMPAT in twl4030 PMIC   Adam Ford
• [U-Boot] [PATCH] regulator: pbias: Add additional compatible flags   Adam Ford
• [U-Boot] arm: omap: configs: various: Remove references to OMAP34XX_UARTx   Adam Ford
• [U-Boot] [PATCH 1/2] DM: I2C: Reduce overhead when used with OF_PLATDATA   Adam Ford
• [U-Boot] [PATCH 2/2] DM: OMAP24XX_I2C: Reduce overhead when used with OF_PLATDATA   Adam Ford
• [U-Boot] [PATCH] DM: omap_gpio: Reduce overhead when used with OF_PLATDATA   Adam Ford
• [U-Boot] [PATCH] ARM: mach-omap2: Don't initialize I2C if DM_I2C is enabled   Adam Ford
• [U-Boot] [PATCH] DM: serial: ti_omap3_common: Don't define serial unless !DM_SERIAL   Adam Ford
• [U-Boot] [PATCH] mmc: omap_hsmmc: Make DM_GPIO calls dependent on DM_GPIO   Adam Ford
• [U-Boot] [PATCH] ARM: omap3_logic_defconfig: Convert to DM_SPL   Adam Ford
• [U-Boot] [PATCH] MMC: davinici_mmc: Enable CD and WP with DM and OF_CONTROL   Adam Ford
• [U-Boot] [PATCH v2] serial: omap: Introduce DM specific omap serial   Adam Ford
• [U-Boot] [PATCH v1 0/3] Let U-Boot generate MAC address for db410   Ramon Fried
• [U-Boot] [PATCH v1 1/3] snapdragon: added msm_board_serial() func   Ramon Fried
• [U-Boot] [PATCH v1 2/3] snapdragon: added MAC generation functions   Ramon Fried
• [U-Boot] [PATCH v1 3/3] db410: alter WLAN/BT MAC address fixup   Ramon Fried
• [U-Boot] [PATCH] db410c: add FIT support   Ramon Fried
• [U-Boot] [PATCH] MAINTAINERS: Add more sources to Arch Snapdragon   Ramon Fried
• [U-Boot] [PATCH] common: fdt: set the value of MEMORY_BANKS_MAX to 8   Ramon Fried
• [U-Boot] BUG num banks 8 exceeds hardcoded limit 4   Ramon Fried
• [U-Boot] [PATCH] fdt_support: Use VLA instead of MEMORY_BANKS_MAX   Ramon Fried
• [U-Boot] [PATCH v2] fdt_support: Use VLA instead of MEMORY_BANKS_MAX   Ramon Fried
• [U-Boot] [PATCH v2] fdt_support: Use VLA instead of MEMORY_BANKS_MAX   Ramon Fried
• [U-Boot] [PATCH] fdt_support: Use VLA instead of MEMORY_BANKS_MAX   Ramon Fried
• [U-Boot] [PATCH] fdt_support: Use VLA instead of MEMORY_BANKS_MAX   Ramon Fried
• [U-Boot] [PATCH] fdt_support: Use VLA instead of MEMORY_BANKS_MAX   Ramon Fried
• [U-Boot] [PATCH] fdt_support: Use VLA instead of MEMORY_BANKS_MAX   Ramon Fried
• [U-Boot] [PATCH] fdt_support: Use VLA instead of MEMORY_BANKS_MAX   Ramon Fried
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if necessary   Ramon Fried
• [U-Boot] [PATCH] Kconfig: Migrate CONFIG_NR_DRAM_BANKS   Ramon Fried
• [U-Boot] [PATCH] Kconfig: Migrate CONFIG_NR_DRAM_BANKS   Ramon Fried
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if necessary   Ramon Fried
• [U-Boot] fdt_support: Use CONFIG_NR_DRAM_BANKS if necessary   Ramon Fried
• [U-Boot] [PATCH] Convert CONFIG_BOARD_LATE_INIT to Kconfig   Ramon Fried
• [U-Boot] [PATCH v2] Convert CONFIG_BOARD_LATE_INIT to Kconfig   Ramon Fried
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Andreas Färber
• [U-Boot] Problem with v2018-09-rc2 to boot EFI on Arndale board   Guillaume GARDET
• [U-Boot] [PATCH u-boot 0/3] amlogic: clean up board files   Beniamino Galvani
• [U-Boot] [PATCH u-boot 1/3] boards: amlogic: remove ethernet gpio reset code from boards   Beniamino Galvani
• [U-Boot] [PATCH u-boot 2/3] boards: amlogic: use common function for environment initialization   Beniamino Galvani
• [U-Boot] [PATCH u-boot 3/3] arm: meson: null-terminate the serial number   Beniamino Galvani
• [U-Boot] [PATCH v2 u-boot 1/2] power: domain: Add the VPU Power Domain driver   Beniamino Galvani
• [U-Boot] Cavium Octeon support for u-boot   Suneel Garapati
• [U-Boot] [PATCH v2 0/3] RK3399: Add support for Ficus board   Ezequiel Garcia
• [U-Boot] [PATCH v2 1/3] arm: dts: rockchip: add some common pin-settings to rk3399   Ezequiel Garcia
• [U-Boot] [PATCH v2 2/3] rockchip: rk3399: add Ficus board   Ezequiel Garcia
• [U-Boot] [PATCH v2 3/3] rockchip: rk3399: Add more instructions to the README   Ezequiel Garcia
• [U-Boot] [PATCH 2/2] board: Add Vamrs Limited Rock960 board support   Ezequiel Garcia
• [U-Boot] [PATCH 0/2] Add Rock960 board support   Ezequiel Garcia
• [U-Boot] [PATCH 0/2] Add Rock960 board support   Ezequiel Garcia
• [U-Boot] [PATCH 0/2] Add Rock960 board support   Ezequiel Garcia
• [U-Boot] [PATCH 0/2] Add Rock960 board support   Ezequiel Garcia
• [U-Boot] boot a bios/uefi with x86_64, without grub   Thierry Gayet
• [U-Boot] boot a bios/uefi with x86_64, without grub   Thierry Gayet
• [U-Boot] [PATCH 0/8][RESEND] Device Tree support for PowerPC in u-boot   Jagdish Gediya
• [U-Boot] [PATCH 1/8][RESEND] powerpc/dts: setup fdt blob at __init_end   Jagdish Gediya
• [U-Boot] [PATCH 2/8][RESEND] powerpc/dts: makefile changes to clean and build dts   Jagdish Gediya
• [U-Boot] [PATCH 3/8][RESEND] binman: Add a new "start-pos" property in section class   Jagdish Gediya
• [U-Boot] [PATCH 4/8][RESEND] binman: Add support for powerpc 'bootpg + resetvec' entry   Jagdish Gediya
• [U-Boot] [PATCH 5/8][RESEND] powerpc: mpc85xx: select BINMAN by default   Jagdish Gediya
• [U-Boot] [PATCH 6/8][RESEND] powerpc: dts: add u-boot.dtsi and mpc85xx-u-boot.dtsi   Jagdish Gediya
• [U-Boot] [PATCH 7/8][RESEND] powerpc: mpc85xx: Use binman to embed dtb inside u-boot   Jagdish Gediya
• [U-Boot] [PATCH 8/8][RESEND] powerpc: dts: Enable device tree support for T2080QDS   Jagdish Gediya
• [U-Boot] [PATCH] armv8: layerscape: Build u-boot-with-spl.bin for selected boards   Jagdish Gediya
• [U-Boot] [PATCH 4/8] binman: Add support for powerpc 'bootpg + resetvec' entry   Jagdish Gediya
• [U-Boot] [PATCH 8/8][RESEND] powerpc: dts: Enable device tree support for T2080QDS   Jagdish Gediya
• [U-Boot] [PATCH v2 1/8] powerpc/dts: Define '_end' symbol in mpc85xx u-boot lds files   Jagdish Gediya
• [U-Boot] [PATCH v2 0/8] Device tree support for Powerpc in u-boot   Jagdish Gediya
• [U-Boot] [PATCH v2 1/8] powerpc/dts: Define '_end' symbol in mpc85xx u-boot lds files   Jagdish Gediya
• [U-Boot] [PATCH v2 2/8] powerpc/dts: Makefile changes to clean and build dts   Jagdish Gediya
• [U-Boot] [PATCH v2 3/8] binman: Add a new "skip-at-start" property in Section class   Jagdish Gediya
• [U-Boot] [PATCH v2 4/8] binman: Add support for Powerpc mpc85xx 'bootpg + resetvec' entry   Jagdish Gediya
• [U-Boot] [PATCH v2 5/8] powerpc: mpc85xx: Select BINMAN by default   Jagdish Gediya
• [U-Boot] [PATCH v2 6/8] powerpc: mpc85xx: Use binman to embed dtb inside u-boot   Jagdish Gediya
• [U-Boot] [PATCH v2 7/8] powerpc: dts: Add u-boot.dtsi to use binman for MPC85xx boards   Jagdish Gediya
• [U-Boot] [PATCH v2 8/8] powerpc: dts: Enable device tree support for T2080QDS   Jagdish Gediya
• [U-Boot] [PATCH v2 3/8] binman: Add a new "skip-at-start" property in Section class   Jagdish Gediya
• [U-Boot] [PATCH v2 6/8] powerpc: mpc85xx: Use binman to embed dtb inside u-boot   Jagdish Gediya
• [U-Boot] [PATCH 4/6] mvebu: select boot device at SoC level   Dennis Gilmore
• [U-Boot] [PATCH v1 1/2] dm: serial: Replace setparity by setconfig   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH v2 02/29] binman: Rename 'position' to 'offset'   Simon Glass
• [U-Boot] [PATCH v2 07/29] binman: Add a new 'image-pos' property   Simon Glass
• [U-Boot] [PATCH] efi_loader: don't allocate unusable RAM   Simon Glass
• [U-Boot] [PATCH v3 11/13] misc: Sort Makefile entries   Simon Glass
• [U-Boot] [PATCH v3 10/13] test: regmap: Add test for regmap_{set, get}   Simon Glass
• [U-Boot] [PATCH v3 07/13] regmap: Add raw read/write functions   Simon Glass
• [U-Boot] [PATCH v3 06/13] regmap: Add error output   Simon Glass
• [U-Boot] [PATCH v3 05/13] regmap: Introduce init_range   Simon Glass
• [U-Boot] U-Boot: Verified Boot: signed configuration and mix and match attack   Simon Glass
• [U-Boot] [PATCH v2 5/8] ARM: Odroid XU3: Adjust BOOT_TARGET_DEVICES to allow booting from SD card (mmc2)   Simon Glass
• [U-Boot] [PATCH 1/2] lib: bitrev: Sync with Linux kernel v4.17   Simon Glass
• [U-Boot] Please pull u-boot-dm (take 2)   Simon Glass
• [U-Boot] [PATCH 6/9] ram: stm32mp1: use PRIx64 macros for printing ram size   Simon Glass
• [U-Boot] [PATCH 3/9] common: include <inttypes.h> always   Simon Glass
• [U-Boot] [PATCH 2/2] sandbox: Enable bitrev library build   Simon Glass
• [U-Boot] [PATCH] common: fdt: Make fdt_del_subnodes/fdt_del_partition static   Simon Glass
• [U-Boot] [PATCH v4 2/3] board: Add gazerbeam driver   Simon Glass
• [U-Boot] [PATCH v3 01/13] test: regmap: Increase size of syscon0 memory   Simon Glass
• [U-Boot] [PATCH v3 02/13] regmap: Fix documentation   Simon Glass
• [U-Boot] [PATCH v3 03/13] regmap: Add documentation   Simon Glass
• [U-Boot] [PATCH v3 04/13] regmap: Improve error handling   Simon Glass
• [U-Boot] [PATCH v3 12/13] misc: Add gdsys_soc driver   Simon Glass
• [U-Boot] [PATCH v3 13/13] misc: Add IHS FPGA driver   Simon Glass
• [U-Boot] [PATCH v4 3/4] test: Add tests for misc uclass   Simon Glass
• [U-Boot] [PATCH 04/20] W1-EEPROM: Add an W1-EEPROM uclass for 1 wire EEPROMs   Simon Glass
• [U-Boot] [PATCH v1 1/5] dm: gpio: Add get_function_number ops   Simon Glass
• [U-Boot] [PATCH v2 1/3] dm: serial: Replace setparity by setconfig   Simon Glass
• [U-Boot] [PATCH v2 2/3] serial: stm32: Replace setparity by setconfig   Simon Glass
• [U-Boot] [PATCH v2 3/3] sandbox: Add serial test   Simon Glass
• [U-Boot] [PATCH v1 2/5] gpio: stm32f7: Add ops get_function   Simon Glass
• [U-Boot] [PATCH 01/10] net: sandbox: Move disabled flag into priv struct   Simon Glass
• [U-Boot] [PATCH 02/10] net: sandbox: Refactor sandbox send function   Simon Glass
• [U-Boot] [PATCH 03/10] net: sandbox: Make the fake eth driver response configurable   Simon Glass
• [U-Boot] [PATCH 04/10] net: sandbox: Share the priv structure with tests   Simon Glass
• [U-Boot] [PATCH 05/10] net: sandbox: Allow fake eth to handle more than 1 packet response   Simon Glass
• [U-Boot] [PATCH 06/10] net: Add an accessor to know if waiting for ARP   Simon Glass
• [U-Boot] [PATCH 07/10] net: sandbox: Add a priv ptr for tests to use   Simon Glass
• [U-Boot] [PATCH 08/10] test: eth: Add a test for ARP requests   Simon Glass
• [U-Boot] [PATCH 09/10] test: eth: Add a test for the target being pinged   Simon Glass
• [U-Boot] [PATCH 10/10] net: Don't overwrite waiting packets with asynchronous replies   Simon Glass
• [U-Boot] U-Boot: Verified Boot: signed configuration and mix and match attack   Simon Glass
• [U-Boot] [PATCH] Revert "efi_loader: efi_allocate_pages is too restrictive"   Simon Glass
• [U-Boot] [PATCH u-boot 1/2] power: domain: Add the VPU Power Domain driver   Simon Glass
• [U-Boot] [PATCH u-boot 2/2] clk: clk_meson: Add mux and div support for reparent and rate setting   Simon Glass
• [U-Boot] [PATCH 1/9] dm: allow 4GB of DRAM on 32bit systems   Simon Glass
• [U-Boot] [PATCH 4/9] MIPS: use PRIx64 macros for printing ram size   Simon Glass
• [U-Boot] [PATCH 5/9] rockchip: rk3368: change type of ram-size field for a min()-calculation   Simon Glass
• [U-Boot] [PATCH 7/9] board: keymile: add explicit cast to truncate the 64bit ram size field   Simon Glass
• [U-Boot] [PATCH 8/9] board: cm_fx6: use PRIx64 macros for printing ram size   Simon Glass
• [U-Boot] [PATCH v1 01/17] cmd: fpga: Remove fit image support passed without fpga device   Simon Glass
• [U-Boot] [PATCH v1 12/17] cmd: fpga: Fix loadfs command   Simon Glass
• [U-Boot] [PATCH v1 14/17] cmd: fpga: Add support for missing fpga loadmk commands   Simon Glass
• [U-Boot] [PATCH v1 13/17] cmd: fpga: Fix loadmk command   Simon Glass
• [U-Boot] [PATCH v1 16/17] cmd: fpga: Fix loads command   Simon Glass
• [U-Boot] [PATCH v2 01/21] pci: Remove 440ep specific macros   Simon Glass
• [U-Boot] [PATCH v2 02/21] dm: Correct typos in uclass_first/next_device_check()   Simon Glass
• [U-Boot] [PATCH v2 03/21] dm: core: Add ofnode function to read PCI vendor and device id   Simon Glass
• [U-Boot] [PATCH v2 04/21] dm: pci: Extract vendor/device id in child_post_bind()   Simon Glass
• [U-Boot] [PATCH v2 05/21] dm: pci: Fix scanning multi-function device   Simon Glass
• [U-Boot] [PATCH v2 06/21] test: dm: pci: Remove unnecessary steps in dm_test_pci_swapcase()   Simon Glass
• [U-Boot] [PATCH v2 07/21] test: dm: pci: Test more than one device on the same bus   Simon Glass
• [U-Boot] [PATCH v2 08/21] pci: sandbox: swap_case: Preserve space indicator bit in BAR registers   Simon Glass
• [U-Boot] [PATCH v2 09/21] test: dm: pci: Test more than one PCI host controller   Simon Glass
• [U-Boot] [PATCH v2 10/21] test: dm: pci: Add tests for configuration space access   Simon Glass
• [U-Boot] [PATCH v2 11/21] pci: sandbox: emul: Fix the call to pci_bus_find_devfn()   Simon Glass
• [U-Boot] [PATCH v2 13/21] pci: sandbox: Support dynamically binding device driver   Simon Glass
• [U-Boot] [PATCH v2 14/21] pci: sandbox: swap_case: Declare dynamic driver matching   Simon Glass
• [U-Boot] [PATCH v2 15/21] sandbox: Update test.dts for dynamic PCI device driver matching   Simon Glass
• [U-Boot] [PATCH v2 16/21] test: dm: pci: Test driver binding with driver data provided   Simon Glass
• [U-Boot] [PATCH v2 17/21] pci: sandbox: emul: Rename priv structure   Simon Glass
• [U-Boot] [PATCH v2 18/21] test: dm: pci: Add tests for mixed static and dynamic devices on the same bus   Simon Glass
• [U-Boot] [PATCH v2 20/21] dm: pci: Add APIs to find capability and extended capability   Simon Glass
• [U-Boot] [PATCH v2 21/21] test: dm: pci: Add cases for finding PCI capability APIs   Simon Glass
• [U-Boot] [PATCH v3 15/21] sandbox: Update test.dts for dynamic PCI device driver matching   Simon Glass
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Simon Glass
• [U-Boot] [PULL] efi patch queue 2018-07-25   Simon Glass
• [U-Boot] [PATCH v9 00/18] efi: Enable sandbox support for EFI loader   Simon Glass
• [U-Boot] [PATCH v9 01/18] Revert "efi_loader: Rename sections to allow for implicit data"   Simon Glass
• [U-Boot] [PATCH v9 02/18] efi: Don't allow CMD_BOOTEFI_SELFTEST on sandbox   Simon Glass
• [U-Boot] [PATCH v9 03/18] efi: sandbox: Add distroboot support   Simon Glass
• [U-Boot] [PATCH v9 04/18] efi: sandbox: Enable EFI loader build for sandbox   Simon Glass
• [U-Boot] [PATCH v9 05/18] efi: Split out test init/uninit into functions   Simon Glass
• [U-Boot] [PATCH v9 06/18] efi: sandbox: Add a simple 'bootefi test' command   Simon Glass
• [U-Boot] [PATCH v9 07/18] efi: Create a function to set up for running EFI code   Simon Glass
• [U-Boot] [PATCH v9 08/18] efi: Rename bootefi_test_finish() to bootefi_run_finish()   Simon Glass
• [U-Boot] [PATCH v9 09/18] sandbox: Align RAM buffer to the machine page size   Simon Glass
• [U-Boot] [PATCH v9 10/18] sandbox: Try to start the RAM buffer at a particular address   Simon Glass
• [U-Boot] [PATCH v9 11/18] sandbox: Add support for calling abort()   Simon Glass
• [U-Boot] [PATCH v9 12/18] sandbox: Enhance map_to_sysmem() to handle foreign pointers   Simon Glass
• [U-Boot] [PATCH v9 13/18] efi: Add a call to exit() along with why we can't use it   Simon Glass
• [U-Boot] [PATCH v9 14/18] efi: Relocate FDT to 127MB instead of 128MB   Simon Glass
• [U-Boot] [PATCH v9 15/18] efi: sandbox: Tidy up copy_fdt() to work with sandbox   Simon Glass
• [U-Boot] [PATCH v9 16/18] efi: Add more debugging for memory allocations   Simon Glass
• [U-Boot] [PATCH v9 17/18] efi_loader: Pass address to fs_read()   Simon Glass
• [U-Boot] [PATCH v9 18/18] efi: sandbox: Enable selftest command   Simon Glass
• [U-Boot] [PATCH v2 0/5] Add get_alternate_function ops   Simon Glass
• [U-Boot] [PATCH v2 1/5] dm: gpio: Add get_alternate_function ops   Simon Glass
• [U-Boot] [PATCH v2 3/5] gpio: stm32f7: Add ops get_alternate_function   Simon Glass
• [U-Boot] [PATCH v2 4/5] gpio: sandbox: Rename GPIOF_(OUTPUT|HIGH|ODR) to SDBX_GPIO_(OUTPUT|HIGH|ODR)   Simon Glass
• [U-Boot] [PATCH v2 5/5] test: dm: Add gpio get_alternate_function ops test   Simon Glass
• [U-Boot] [PATCH v3 2/4] serial: stm32: Replace setparity by setconfig   Simon Glass
• [U-Boot] [PATCH v3 1/4] dm: serial: Replace setparity by setconfig   Simon Glass
• [U-Boot] [PATCH v3 4/4] sandbox: Add serial test   Simon Glass
• [U-Boot] [PATCH v3 3/4] dm: serial: Remove setparity ops   Simon Glass
• [U-Boot] [PATCH 3/4] console: unify fgetc function when console MUX is deactivated   Simon Glass
• [U-Boot] [PATCH 2/4] serial: protect access to serial rx buffer   Simon Glass
• [U-Boot] [PATCH v2 2/2] sandbox: Enable bitrev library build   Simon Glass
• [U-Boot] [PATCH 1/2] tpm: sandbox: fix wrong check on pcr_map   Simon Glass
• [U-Boot] [PATCH 2/2] tpm: sandbox: fix wrong assignment with a simplification   Simon Glass
• [U-Boot] [PATCH v1 14/17] cmd: fpga: Add support for missing fpga loadmk commands   Simon Glass
• [U-Boot] [PATCH v2 14/17] cmd: fpga: Add support for missing fpga loadmk commands   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH] common: fdt: set the value of MEMORY_BANKS_MAX to 8   Simon Glass
• [U-Boot] [PATCH 1/2] ofnode: add ofnode_by_prop_value()   Simon Glass
• [U-Boot] [PATCH 2/2] fdt: fdtdec_setup_memory_banksize() use livetree   Simon Glass
• [U-Boot] [PATCH 3/6] x86: dts: Remove coreboot_fb.dtsi   Simon Glass
• [U-Boot] [PATCH 6/6] x86: efi: payload: Add default TSC frequency in the device tree   Simon Glass
• [U-Boot] [PATCH v6 08/14] regmap: Add raw read/write functions   Simon Glass
• [U-Boot] [PATCH 1/4] env: fat: drop not needed #ifdef CMD_SAVEENV   Simon Glass
• [U-Boot] [PATCH 2/4] env: flash: drop not needed #ifdef CMD_SAVEENV   Simon Glass
• [U-Boot] [PATCH 3/4] env: nand: drop not needed #ifdef CMD_SAVEENV   Simon Glass
• [U-Boot] [PATCH 4/4] env: sf: drop not needed #ifdef CMD_SAVEENV   Simon Glass
• [U-Boot] [PATCH v4 3/7] uclass: Add dev_get_uclass_index() to get the uclass/index of a device   Simon Glass
• [U-Boot] [PATCH v4 5/7] dm: convert device_get_global_by_of_offset() to device_get_global_by_ofnode()   Simon Glass
• [U-Boot] [PATCH v4 7/7] cmd: Add bind/unbind commands to bind a device to a driver from the command line   Simon Glass
• [U-Boot] [PATCH v4 6/7] device: expose the functions used to remove and unbind children of a device   Simon Glass
• [U-Boot] [PATCH 04/10] Add UCLASS_TEE for Trusted Execution Environment   Simon Glass
• [U-Boot] [PATCH v2 1/3] efi: Fix truncation of constant value   Simon Glass
• [U-Boot] [RFC PATCH v2 3/6] dm: usb: Add UCLASS_USB_DEV_GENERIC shutdown   Simon Glass
• [U-Boot] [PATCH] sandbox: Move BSS after EFI sections   Simon Glass
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Simon Glass
• [U-Boot] [PATCH v3 8/8] video_display: Add Xilinx LogiCore DP TX   Simon Glass
• [U-Boot] [PATCH v3 7/8] video: Sort Makefile entries   Simon Glass
• [U-Boot] [UBOOT PATCH 2/2] dm: core: Scan "/firmware" node by default   Simon Glass
• [U-Boot] [UBOOT PATCH 1/2] dm: core: Move "/clock" node scan into function   Simon Glass
• [U-Boot] [PATCH 3/3] bootcount: add DM-based backing store for bootcount   Simon Glass
• [U-Boot] [PATCH v4 01/17] ram: Add driver for MPC83xx   Simon Glass
• [U-Boot] [UBOOT PATCH 2/2] dm: core: Scan "/firmware" node by default   Simon Glass
• [U-Boot] [PATCH v3 01/10] video: stm32: stm32_ltdc: add bridge to display controller   Simon Glass
• [U-Boot] [PATCH v3 02/10] include: Add new DCS commands in the enum list   Simon Glass
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Simon Glass
• [U-Boot] [RESEND PATCH v9 01/18] Revert "efi_loader: Rename sections to allow for implicit data"   Simon Glass
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Simon Glass
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Simon Glass
• [U-Boot] [PATCH] dm: test: Fix typo in test-main comment   Simon Glass
• [U-Boot] Disabling CONFIG_DM_I2C_COMPAT in twl4030 PMIC   Simon Glass
• [U-Boot] [PATCH v2 1/3] ofnode: add ofnode_by_prop_value()   Simon Glass
• [U-Boot] [PATCH v2 3/3] test: ofnode: test ofnode_by_prop_value()   Simon Glass
• [U-Boot] [PATCH v3 03/10] video: add support of MIPI DSI interface   Simon Glass
• [U-Boot] [PATCH v3 04/10] video: add MIPI DSI host controller bridge   Simon Glass
• [U-Boot] [RFC PATCH v2 3/6] dm: usb: Add UCLASS_USB_DEV_GENERIC shutdown   Simon Glass
• [U-Boot] [PULL 2018.09] efi patch queue 2018-08-21   Simon Glass
• [U-Boot] [RESEND PATCH v9 01/18] Revert "efi_loader: Rename sections to allow for implicit data"   Simon Glass
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Simon Glass
• [U-Boot] [PATCH] DM: omap_gpio: Reduce overhead when used with OF_PLATDATA   Simon Glass
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Simon Glass
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Simon Glass
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Simon Glass
• [U-Boot] [PATCH v3 22/58] reset: Add reset valid   Simon Glass
• [U-Boot] [PATCH v3 54/58] clk: Use clk_get_by_index_tail()   Simon Glass
• [U-Boot] [PATCH v3 55/58] reset: Get the RESET by index without device   Simon Glass
• [U-Boot] [PATCH v3 53/58] clk: Get the CLK by index without device   Simon Glass
• [U-Boot] [PATCH 3/3] bootcount: add DM-based backing store for bootcount   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH] DM: serial: ti_omap3_common: Don't define serial unless !DM_SERIAL   Simon Glass
• [U-Boot] [PATCH] ARM: mach-omap2: Don't initialize I2C if DM_I2C is enabled   Simon Glass
• [U-Boot] [RESEND PATCH v9 01/18] Revert "efi_loader: Rename sections to allow for implicit data"   Simon Glass
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Simon Glass
• [U-Boot] [PATCH] binman: fix a few typos in documentation   Simon Glass
• [U-Boot] [PATCH 00/10] AVB using OP-TEE   Simon Glass
• [U-Boot] [PATCH 04/10] Add UCLASS_TEE for Trusted Execution Environment   Simon Glass
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Simon Glass
• [U-Boot] [PATCH 00/10] AVB using OP-TEE   Simon Glass
• [U-Boot] [PATCH 04/10] Add UCLASS_TEE for Trusted Execution Environment   Simon Glass
• [U-Boot] [RESEND PATCH v9 01/18] Revert "efi_loader: Rename sections to allow for implicit data"   Simon Glass
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Simon Glass
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Simon Glass
• [U-Boot] [PATCH v9 16/18] efi: Add more debugging for memory allocations   Simon Glass
• [U-Boot] [PATCH v4 02/17] reset: Return 0 if no request ops   Simon Glass
• [U-Boot] [PATCH v2 2/8] powerpc/dts: Makefile changes to clean and build dts   Simon Glass
• [U-Boot] [PATCH 1/1] test: fix typo in cmd_ut_category() description   Simon Glass
• [U-Boot] [PATCH v2 01/15] dm: fdt: scan for devices under /firmware too   Simon Glass
• [U-Boot] [PATCH v2 02/15] cmd: avb read_rb: print rb_idx in hexadecimal   Simon Glass
• [U-Boot] [PATCH v2 03/15] cmd: avb: print error message if command fails   Simon Glass
• [U-Boot] [PATCH v2 05/15] Add UCLASS_TEE for Trusted Execution Environment   Simon Glass
• [U-Boot] [PATCH v2 07/15] tee: add OP-TEE driver   Simon Glass
• [U-Boot] [PATCH v2 08/15] Documentation: tee uclass and op-tee driver   Simon Glass
• [U-Boot] [PATCH v2 09/15] test: tee: test TEE uclass   Simon Glass
• [U-Boot] [PATCH v2 10/15] sandbox: dt: add sandbox_tee node   Simon Glass
• [U-Boot] [PATCH v2 11/15] configs: sandbox: enable CONFIG_TEE (TEE uclass)   Simon Glass
• [U-Boot] [PATCH v2 12/15] arm: dt: hikey: Add optee node   Simon Glass
• [U-Boot] [PATCH v2 14/15] tee: optee: support AVB trusted application   Simon Glass
• [U-Boot] [PATCH v2 13/15] optee: support routing of rpmb data frames to mmc   Simon Glass
• [U-Boot] [PATCH 1/4] x86: efi: payload: Install E820 map from EFI memory map   Simon Glass
• [U-Boot] [PATCH 3/3] bootcount: add DM-based backing store for bootcount   Simon Glass
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Simon Glass
• [U-Boot] [PATCH 2/4] efi: stub: Pass EFI system table address to U-Boot payload   Simon Glass
• [U-Boot] [PATCH 3/4] x86: zimage: Support booting Linux kernel from an EFI payload   Simon Glass
• [U-Boot] [PATCH 4/4] x86: efi: payload: Turn on acpi in the kernel command line   Simon Glass
• [U-Boot] [PATCH 4/8] binman: Add support for powerpc 'bootpg + resetvec' entry   Simon Glass
• [U-Boot] [PATCH] x86: zimage: Remove acpi_rsdp_addr propagation to kernel boot parameters   Simon Glass
• [U-Boot] [PATCH V2 2/2] pci: Update documentation to make 'compatible' string optional   Simon Glass
• [U-Boot] [PATCH] image-fdt: reserve lmb for fdt   Simon Glass
• [U-Boot] [PATCH v2 3/8] binman: Add a new "skip-at-start" property in Section class   Simon Glass
• [U-Boot] [PATCH 11/15] efi_loader: capitalization table   Simon Glass
• [U-Boot] [PATCH v2 13/13] configs: sandbox*: Enable UBSAN   Simon Glass
• [U-Boot] [PATCH 1/6] x86: coreboot: Add generic coreboot payload support   Christian Gmeiner
• [U-Boot] [PATCH 5/6] x86: coreboot: Add default TSC frequency in the device tree   Christian Gmeiner
• [U-Boot] [PATCH 4/6] x86: tsc: Try hardware calibration first   Christian Gmeiner
• [U-Boot] [PATCH v12 1/3] Consolidating UDP header functions.   Christian Gmeiner
• [U-Boot] [PATCH v12 2/3] Add TCP   Christian Gmeiner
• [U-Boot] [PATCH v12 3/3] Add wget application   Christian Gmeiner
• [U-Boot] [PATCH 4/6] x86: tsc: Try hardware calibration first   Christian Gmeiner
• [U-Boot] [PATCH 1/4] env: fat: drop not needed #ifdef CMD_SAVEENV   Christian Gmeiner
• [U-Boot] [PATCH 2/4] env: flash: drop not needed #ifdef CMD_SAVEENV   Christian Gmeiner
• [U-Boot] [PATCH 3/4] env: nand: drop not needed #ifdef CMD_SAVEENV   Christian Gmeiner
• [U-Boot] [PATCH 4/4] env: sf: drop not needed #ifdef CMD_SAVEENV   Christian Gmeiner
• [U-Boot] [PATCH] common: add board specific hook for os preboot config   Christian Gmeiner
• [U-Boot] Unable to boot evb-ast2500   Cédric Le Goater
• [U-Boot] Unable to boot evb-ast2500   Cédric Le Goater
• [U-Boot] [PATCH] dm: core: fix devfdt_remap_addr_index()   Cédric Le Goater
• [U-Boot] [PATCH] ftgmac100: Add DM support to the current driver   Cédric Le Goater
• [U-Boot] [PATCH] ARM: socfpga: Convert to DM serial   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: socfpga: Convert to DM serial   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: socfpga: Convert to DM serial   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: socfpga: Convert to DM serial   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: socfpga: Convert to DM serial   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: socfpga: Convert to DM serial   Simon Goldschmidt
• [U-Boot] [PATCH 0/5] Get socfpga gen5 SPL working again.   Simon Goldschmidt
• [U-Boot] [PATCH 1/5] arm: socfpga: fix SPL on gen5 after moving to DM serial   Simon Goldschmidt
• [U-Boot] [PATCH 2/5] arm: socfpga: fix device trees to work with DM serial   Simon Goldschmidt
• [U-Boot] [PATCH 3/5] arm: socfpga: cyclone5: handle debug uart   Simon Goldschmidt
• [U-Boot] [PATCH 4/5] board_init.c: fix simple malloc by storing malloc_limit   Simon Goldschmidt
• [U-Boot] [PATCH 5/5] malloc_simple: calloc: don't call memset if malloc failed   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI   Simon Goldschmidt
• [U-Boot] [PATCH 4/5] board_init.c: fix simple malloc by storing malloc_limit   Simon Goldschmidt
• [U-Boot] [PATCH 3/5] arm: socfpga: cyclone5: handle debug uart   Simon Goldschmidt
• [U-Boot] [PATCH 1/5] arm: socfpga: fix SPL on gen5 after moving to DM serial   Simon Goldschmidt
• [U-Boot] [PATCH 2/5] arm: socfpga: fix device trees to work with DM serial   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI   Simon Goldschmidt
• [U-Boot] [PATCH 2/5] arm: socfpga: fix device trees to work with DM serial   Simon Goldschmidt
• [U-Boot] [PATCH] sf: Add SPI_FLASH_4BYTE_MODE_ONLY option to support 4-byte mode   Simon Goldschmidt
• [U-Boot] [PATCH] sf: Add SPI_FLASH_4BYTE_MODE_ONLY option to support 4-byte mode   Simon Goldschmidt
• [U-Boot] [PATCH] sf: Add SPI_FLASH_4BYTE_MODE_ONLY option to support 4-byte mode   Simon Goldschmidt
• [U-Boot] [PATCH] sf: Add SPI_FLASH_4BYTE_MODE_ONLY option to support 4-byte mode   Simon Goldschmidt
• [U-Boot] [PATCH 2/5] arm: socfpga: fix device trees to work with DM serial   Simon Goldschmidt
• [U-Boot] [PATCH 0/6] Get socfpga gen5 SPL working again.   Simon Goldschmidt
• [U-Boot] [PATCH 1/6] arm: socfpga: fix SPL on gen5 after moving to DM serial   Simon Goldschmidt
• [U-Boot] [PATCH 2/6] arm: socfpga: fix device trees to work with DM serial   Simon Goldschmidt
• [U-Boot] [PATCH 3/6] arm: socfpga: spl_gen5: clean up malloc_base assignment   Simon Goldschmidt
• [U-Boot] [PATCH 4/6] arm: socfpga: cyclone5: handle debug uart   Simon Goldschmidt
• [U-Boot] [PATCH 5/6] serial: ns16550: fix debug uart putc called before init   Simon Goldschmidt
• [U-Boot] [PATCH 6/6] malloc_simple: calloc: don't call memset if malloc failed   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI   Simon Goldschmidt
• [U-Boot] [PATCH 5/6] serial: ns16550: fix debug uart putc called before init   Simon Goldschmidt
• [U-Boot] [PATCH 5/6] serial: ns16550: fix debug uart putc called before init   Simon Goldschmidt
• [U-Boot] [PATCH 1/6] arm: socfpga: fix SPL on gen5 after moving to DM serial   Simon Goldschmidt
• [U-Boot] [PATCH 1/6] arm: socfpga: fix SPL on gen5 after moving to DM serial   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI   Simon Goldschmidt
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI   Simon Goldschmidt
• [U-Boot] [PATCH v3 0/8] Get socfpga gen5 SPL working again.   Simon Goldschmidt
• [U-Boot] [PATCH v3 1/8] arm: socfpga: fix SPL on gen5 after moving to DM serial   Simon Goldschmidt
• [U-Boot] [PATCH v3 2/8] arm: socfpga: fix device trees to work with DM serial   Simon Goldschmidt
• [U-Boot] [PATCH v3 3/8] arm: socfpga: spl_gen5: clean up malloc_base assignment   Simon Goldschmidt
• [U-Boot] [PATCH v3 4/8] arm: socfpga: cyclone5: handle debug uart   Simon Goldschmidt
• [U-Boot] [PATCH v3 5/8] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH v3 6/8] arm: socfpga: gen5: combine some init code for SPL and U-Boot   Simon Goldschmidt
• [U-Boot] [PATCH v3 7/8] arm: socfpga: fix SPL booting from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH v3 8/8] malloc_simple: calloc: don't call memset if malloc failed   Simon Goldschmidt
• [U-Boot] [PATCH] spl: fix debug print in spl_common_init()   Simon Goldschmidt
• [U-Boot] [PATCH] kconfig: fix typo 'parition'   Simon Goldschmidt
• [U-Boot] [PATCH 1/2] Add domain mapping for Pepperl+Fuchs   Simon Goldschmidt
• [U-Boot] [PATCH 2/2] Add user alias for Simon Goldschmidt   Simon Goldschmidt
• [U-Boot] [PATCH v3 2/8] arm: socfpga: fix device trees to work with DM serial   Simon Goldschmidt
• [U-Boot] [PATCH] kconfig: fix typo 'parition'   Simon Goldschmidt
• [U-Boot] [PATCH v3 7/8] arm: socfpga: fix SPL booting from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH v3 5/8] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH v3 0/8] Get socfpga gen5 SPL working again.   Simon Goldschmidt
• [U-Boot] [PATCH v3 2/8] arm: socfpga: fix device trees to work with DM serial   Simon Goldschmidt
• [U-Boot] [PATCH v3 2/8] arm: socfpga: fix device trees to work with DM serial   Simon Goldschmidt
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Simon Goldschmidt
• [U-Boot] [PATCH v4 0/5] Get socfpga gen5 SPL working again.   Simon Goldschmidt
• [U-Boot] [PATCH v4 1/5] arm: socfpga: fix device trees to work with DM serial   Simon Goldschmidt
• [U-Boot] [PATCH v4 2/5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH v4 3/5] arm: socfpga: gen5: combine some init code for SPL and U-Boot   Simon Goldschmidt
• [U-Boot] [PATCH v4 4/5] arm: socfpga: fix SPL booting from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH v4 5/5] malloc_simple: calloc: don't call memset if malloc failed   Simon Goldschmidt
• [U-Boot] [PATCH v4 2/5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH v4 4/5] arm: socfpga: fix SPL booting from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH V2] spl: Weed out CONFIG_SYS_TEXT_BASE usage   Simon Goldschmidt
• [U-Boot] [PATCH V2] spl: Weed out CONFIG_SYS_TEXT_BASE usage   Simon Goldschmidt
• [U-Boot] [PATCH V2] spl: Weed out CONFIG_SYS_TEXT_BASE usage   Simon Goldschmidt
• [U-Boot] [PATCH V2] spl: Weed out CONFIG_SYS_TEXT_BASE usage   Simon Goldschmidt
• [U-Boot] [PATCH v4 2/5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH v4 4/5] arm: socfpga: fix SPL booting from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH V2] spl: Weed out CONFIG_SYS_TEXT_BASE usage   Simon Goldschmidt
• [U-Boot] [PATCH v4 4/5] arm: socfpga: fix SPL booting from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH v4 4/5] arm: socfpga: fix SPL booting from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH v5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH v2] kconfig: fix typo 'parition'   Simon Goldschmidt
• [U-Boot] [PATCH v1] malloc_simple: calloc: don't call memset if malloc failed   Simon Goldschmidt
• [U-Boot] [PATCH v5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH v5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH v5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH v5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH] sf: remove spi-flash chip names from SPL binary   Simon Goldschmidt
• [U-Boot] [PATCH v5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [PATCH v5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Simon Goldschmidt
• [U-Boot] [U-Boot, 2/2] FIT image: use compression = "none" for ramdisks   Simon Goldschmidt
• [U-Boot] sunxi: USB gadget does not work on H2+ after 92a30692b2b18f45aae6fdaae38d67ed03dd2d11   Nuno Gonçalves
• [U-Boot] sunxi: USB gadget does not work on H2+ after 92a30692b2b18f45aae6fdaae38d67ed03dd2d11   Nuno Gonçalves
• [U-Boot] sunxi: USB gadget does not work on H2+ after 92a30692b2b18f45aae6fdaae38d67ed03dd2d11   Nuno Gonçalves
• [U-Boot] sunxi: USB gadget does not work on H2+ after 92a30692b2b18f45aae6fdaae38d67ed03dd2d11   Nuno Gonçalves
• [U-Boot] sunxi: USB gadget does not work on H2+ after 92a30692b2b18f45aae6fdaae38d67ed03dd2d11   Nuno Gonçalves
• [U-Boot] sunxi: USB gadget does not work on H2+ after 92a30692b2b18f45aae6fdaae38d67ed03dd2d11   Nuno Gonçalves
• [U-Boot] sunxi: USB gadget does not work on H2+ after 92a30692b2b18f45aae6fdaae38d67ed03dd2d11   Nuno Gonçalves
• [U-Boot] [PATCH] efi_loader: don't allocate unusable RAM   Alexander Graf
• [U-Boot] [PATCH 1/1] distro_bootcmd: Switch bootefi to use loadaddr by default.   Alexander Graf
• [U-Boot] [PATCH] sandbox: Move BSS after EFI sections   Alexander Graf
• [U-Boot] [PATCH 01/11] imx: Add bootcmd to load and run UEFI from mmc   Alexander Graf
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Alexander Graf
• [U-Boot] [PATCH 1/1] distro_bootcmd: Switch bootefi to use loadaddr by default.   Alexander Graf
• [U-Boot] [RFC] efi_loader: workaround for EDK2's shell.efi   Alexander Graf
• [U-Boot] [RFC] efi_loader: workaround for EDK2's shell.efi   Alexander Graf
• [U-Boot] [U-Boot,6/8] efi_loader: Pass file path to payload   Alexander Graf
• [U-Boot] [PATCH 01/11] imx: Add bootcmd to load and run UEFI from mmc   Alexander Graf
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Alexander Graf
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Alexander Graf
• [U-Boot] [PATCH 0/3] efi_loader: Fix -fdata-section fallout with bss   Alexander Graf
• [U-Boot] [PATCH 1/3] x86: Include bss subsections in linker script   Alexander Graf
• [U-Boot] [PATCH 2/3] x86: Enable -fdata-sections always   Alexander Graf
• [U-Boot] [PATCH 3/3] riscv: Include bss subsections in linker script   Alexander Graf
• [U-Boot] [U-Boot, v2, 2/3] efi: Add EFI_MEMORY_{NV, MORE_RELIABLE, RO} attributes   Alexander Graf
• [U-Boot] [U-Boot,v2,1/3] efi: Fix truncation of constant value   Alexander Graf
• [U-Boot] [U-Boot, v2, 3/3] cmd: efi: Clarify calculation precedence for '&' and '?'   Alexander Graf
• [U-Boot] [RESEND PATCH v9 01/18] Revert "efi_loader: Rename sections to allow for implicit data"   Alexander Graf
• [U-Boot] Cavium Octeon support for u-boot   Alexander Graf
• [U-Boot] [PULL 2018.09] efi patch queue 2018-08-21   Alexander Graf
• [U-Boot] [PULL 2018.09] efi patch queue 2018-08-21   Alexander Graf
• [U-Boot] [RESEND PATCH v9 01/18] Revert "efi_loader: Rename sections to allow for implicit data"   Alexander Graf
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Alexander Graf
• [U-Boot] Cavium Octeon support for u-boot   Alexander Graf
• [U-Boot] [RESEND PATCH v9 01/18] Revert "efi_loader: Rename sections to allow for implicit data"   Alexander Graf
• [U-Boot] [PATCH 0/8] [1/3] Initial support Texas Instrument's AM654 Platform   Alexander Graf
• [U-Boot] [PATCH v9 02/18] efi: Don't allow CMD_BOOTEFI_SELFTEST on sandbox   Alexander Graf
• [U-Boot] [PATCH v9 03/18] efi: sandbox: Add distroboot support   Alexander Graf
• [U-Boot] [PATCH v9 04/18] efi: sandbox: Enable EFI loader build for sandbox   Alexander Graf
• [U-Boot] [PATCH v9 06/18] efi: sandbox: Add a simple 'bootefi test' command   Alexander Graf
• [U-Boot] [PATCH v9 09/18] sandbox: Align RAM buffer to the machine page size   Alexander Graf
• [U-Boot] [PATCH v9 10/18] sandbox: Try to start the RAM buffer at a particular address   Alexander Graf
• [U-Boot] [PATCH v9 12/18] sandbox: Enhance map_to_sysmem() to handle foreign pointers   Alexander Graf
• [U-Boot] [PATCH v9 13/18] efi: Add a call to exit() along with why we can't use it   Alexander Graf
• [U-Boot] [PATCH v9 16/18] efi: Add more debugging for memory allocations   Alexander Graf
• [U-Boot] [U-Boot, v9, 14/18] efi: Relocate FDT to 127MB instead of 128MB   Alexander Graf
• [U-Boot] [U-Boot, v9, 17/18] efi_loader: Pass address to fs_read()   Alexander Graf
• [U-Boot] [U-Boot, v9, 15/18] efi: sandbox: Tidy up copy_fdt() to work with sandbox   Alexander Graf
• [U-Boot] [PATCH v9 00/18] efi: Enable sandbox support for EFI loader   Alexander Graf
• [U-Boot] [PATCH 01/15] lib: build charset.o only if needed   Alexander Graf
• [U-Boot] [PATCH 02/15] efi_loader: rename utf16_strlen, utf16_strnlen   Alexander Graf
• [U-Boot] [PATCH 03/15] lib: charset: utility functions for Unicode   Alexander Graf
• [U-Boot] [PATCH 04/15] test: unit tests for Unicode functions   Alexander Graf
• [U-Boot] [PATCH 05/15] lib: vsprintf: correct printing of Unicode strings   Alexander Graf
• [U-Boot] [PATCH 06/15] test: test printing Unicode   Alexander Graf
• [U-Boot] [PATCH 07/15] efi_loader: remove limit on variable length   Alexander Graf
• [U-Boot] [PATCH 08/15] efi_loader: don't use unlimited stack as buffer   Alexander Graf
• [U-Boot] [PATCH 09/15] efi_loader: buffer size for load options   Alexander Graf
• [U-Boot] [PATCH 11/15] efi_loader: capitalization table   Alexander Graf
• [U-Boot] [PATCH 14/15] efi_loader: EFI_UNICODE_COLLATION_PROTOCOL   Alexander Graf
• [U-Boot] [PATCH 02/15] efi_loader: rename utf16_strlen, utf16_strnlen   Alexander Graf
• [U-Boot] [PATCH 02/15] efi_loader: rename utf16_strlen, utf16_strnlen   Alexander Graf
• [U-Boot] [PATCH 05/15] lib: vsprintf: correct printing of Unicode strings   Alexander Graf
• [U-Boot] [PATCH 07/15] efi_loader: remove limit on variable length   Alexander Graf
• [U-Boot] [PATCH 11/15] efi_loader: capitalization table   Alexander Graf
• [U-Boot] [PATCH 11/15] efi_loader: capitalization table   Alexander Graf
• [U-Boot] [PATCH 0/8] [1/3] Initial support Texas Instrument's AM654 Platform   Alexander Graf
• [U-Boot] [PATCH 1/2] ARM: tegra: reserve unmapped RAM so EFI doesn't use it   Alexander Graf
• [U-Boot] [PATCH V2 1/2] pci: Support parsing PCI controller DT subnodes   Alexander Graf
• [U-Boot] [PATCH 11/15] efi_loader: capitalization table   Alexander Graf
• [U-Boot] [PATCH V2 1/2] ARM: tegra: reserve unmapped RAM so EFI doesn't use it   Alexander Graf
• [U-Boot] [PATCH V2 1/2] ARM: tegra: reserve unmapped RAM so EFI doesn't use it   Alexander Graf
• [U-Boot] [RFC 1/3] test/py: convert fs-test.sh to pytest   Alexander Graf
• [U-Boot] [PATCH] u-boot: fixup the iommu-map property of fsl-mc node   Nipun Gupta
• [U-Boot] [PATCH] video: kconfig: remove DM_I2C dependency of I2C_EDID   Anatolij Gustschin
• [U-Boot] [ v2 02/10] video: stm32: stm32_ltdc: add bridge to display controller   Anatolij Gustschin
• [U-Boot] [ v2 01/10] dm: panel: get timings from panel   Anatolij Gustschin
• [U-Boot] [PATCH v3 1/6] drivers: Add OSD uclass   Anatolij Gustschin
• [U-Boot] [PATCH v3 2/6] video_osd: Add ihs_video_out driver   Anatolij Gustschin
• [U-Boot] [PATCH v3 01/13] test: regmap: Increase size of syscon0 memory   Anatolij Gustschin
• [U-Boot] [PATCH v3 02/13] regmap: Fix documentation   Anatolij Gustschin
• [U-Boot] [PATCH v3 03/13] regmap: Add documentation   Anatolij Gustschin
• [U-Boot] [PATCH v3 04/13] regmap: Improve error handling   Anatolij Gustschin
• [U-Boot] [PATCH v3 05/13] regmap: Introduce init_range   Anatolij Gustschin
• [U-Boot] [PATCH v3 06/13] regmap: Add error output   Anatolij Gustschin
• [U-Boot] [PATCH v3 07/13] regmap: Add raw read/write functions   Anatolij Gustschin
• [U-Boot] [PATCH v3 08/13] regmap: Support reading from specific range   Anatolij Gustschin
• [U-Boot] [PATCH v3 09/13] regmap: Define regmap_{get,set}   Anatolij Gustschin
• [U-Boot] [PATCH v3 10/13] test: regmap: Add test for regmap_{set, get}   Anatolij Gustschin
• [U-Boot] [PATCH v3 11/13] misc: Sort Makefile entries   Anatolij Gustschin
• [U-Boot] [PATCH V2 1/4] power-domain: add dummy functions when CONFIG_POWER_DOMAIN not defined   Anatolij Gustschin
• [U-Boot] [PATCH V2 2/4] power: Add CONFIG_SPL_POWER_DOMAIN config   Anatolij Gustschin
• [U-Boot] [PATCH V2 3/4] dm: core: device: enable power domain in probe   Anatolij Gustschin
• [U-Boot] [PATCH V2 4/4] dm: power-domain: query power domain after get device   Anatolij Gustschin
• [U-Boot] [PATCH v3 1/4] power-domain: add dummy functions when CONFIG_POWER_DOMAIN not defined   Anatolij Gustschin
• [U-Boot] [PATCH V2 1/4] power-domain: add dummy functions when CONFIG_POWER_DOMAIN not defined   Anatolij Gustschin
• [U-Boot] [PATCH v3 1/4] power-domain: add dummy functions when CONFIG_POWER_DOMAIN not defined   Anatolij Gustschin
• [U-Boot] [PATCH 1/2] i2c-mux: pca954x: support pca9646 i2c switch   Anatolij Gustschin
• [U-Boot] [PATCH 2/2] i2c: imx_lpi2c: add uclass api support   Anatolij Gustschin
• [U-Boot] [PATCH 1/2] i2c-mux: pca954x: support pca9646 i2c switch   Anatolij Gustschin
• [U-Boot] [PATCH 2/2] i2c: imx_lpi2c: add uclass api support   Anatolij Gustschin
• [U-Boot] [PATCH v4 01/13] test: regmap: Increase size of syscon0 memory   Anatolij Gustschin
• [U-Boot] [PATCH v4 02/13] regmap: Fix documentation   Anatolij Gustschin
• [U-Boot] [PATCH v4 03/13] regmap: Add documentation   Anatolij Gustschin
• [U-Boot] [PATCH v4 04/13] regmap: Improve error handling   Anatolij Gustschin
• [U-Boot] [PATCH v4 05/13] regmap: Introduce init_range   Anatolij Gustschin
• [U-Boot] [PATCH v4 06/13] regmap: Add error output   Anatolij Gustschin
• [U-Boot] [PATCH v4 07/13] regmap: Add raw read/write functions   Anatolij Gustschin
• [U-Boot] [PATCH v4 08/13] regmap: Support reading from specific range   Anatolij Gustschin
• [U-Boot] [PATCH v4 08/13] regmap: Support reading from specific range   Anatolij Gustschin
• [U-Boot] [PATCH v4 10/13] test: regmap: Add test for regmap_{set, get}   Anatolij Gustschin
• [U-Boot] [PATCH v5 11/13] misc: Sort Makefile entries   Anatolij Gustschin
• [U-Boot] [PATCH v4 11/13] misc: Sort Makefile entries   Anatolij Gustschin
• [U-Boot] [PATCH v5 11/13] misc: Sort Makefile entries   Anatolij Gustschin
• [U-Boot] [PATCH v4 1/4] misc: docs: Fix comments in misc.h   Anatolij Gustschin
• [U-Boot] [PATCH v4 2/4] misc: uclass: Add enable/disable function   Anatolij Gustschin
• [U-Boot] [PATCH v4 3/4] test: Add tests for misc uclass   Anatolij Gustschin
• [U-Boot] [PATCH v4 4/4] misc: Add gdsys_ioep driver   Anatolij Gustschin
• [U-Boot] [PATCH v4 12/13] misc: Add gdsys_soc driver   Anatolij Gustschin
• [U-Boot] [PATCH v4 13/13] misc: Add IHS FPGA driver   Anatolij Gustschin
• [U-Boot] [PATCH v4 07/13] regmap: Add raw read/write functions   Anatolij Gustschin
• [U-Boot] [PATCH v4 01/13] test: regmap: Increase size of syscon0 memory   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-staging   Anatolij Gustschin
• [U-Boot] Please pull u-boot-video/master   Anatolij Gustschin
• [U-Boot] [PATCH v4 07/13] regmap: Add raw read/write functions   Anatolij Gustschin
• [U-Boot] [PATCH V3 01/32] dt-bindings: pinctrl: add i.MX8QXP pads definition   Anatolij Gustschin
• [U-Boot] [PATCH V3 02/32] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QXP clocks definition   Anatolij Gustschin
• [U-Boot] [PATCH V3 03/32] dt-bindings: soc: add i.MX8QXP pm and rsrc definition   Anatolij Gustschin
• [U-Boot] [PATCH V3 04/32] imx8: add scfw macro definition   Anatolij Gustschin
• [U-Boot] [PATCH V3 05/32] imx: add Kconfig entry for i.MX8QXP   Anatolij Gustschin
• [U-Boot] [PATCH V3 06/32] arm: build mach-imx for i.MX8   Anatolij Gustschin
• [U-Boot] [PATCH V3 07/32] misc: add i.MX8 misc driver   Anatolij Gustschin
• [U-Boot] [PATCH V3 07/32] misc: add i.MX8 misc driver   Anatolij Gustschin
• [U-Boot] [PATCH V3 08/32] misc: imx8: add scfw api impementation   Anatolij Gustschin
• [U-Boot] [PATCH v3 1/8] drivers: Add AXI uclass   Anatolij Gustschin
• [U-Boot] Please pull u-boot-video/master   Anatolij Gustschin
• [U-Boot] Pull request: u-boot-staging   Anatolij Gustschin
• [U-Boot] [PATCH v3 0/3] Expand dp83867-driver   Janine Hagemann
• [U-Boot] [PATCH v3 1/3] net: phy: ti: Add lane swapping support in the DP83867 TI's PHY driver   Janine Hagemann
• [U-Boot] [PATCH v3 2/3] net: phy: ti: Recover from "port mirroring" N/A MODE4   Janine Hagemann
• [U-Boot] [PATCH v3 3/3] net: phy: ti: Add binding for the CLK_OUT pin muxing   Janine Hagemann
• [U-Boot] [PATCH v3 0/7] Add ethernet support for phyCORE-RK3288   Janine Hagemann
• [U-Boot] [PATCH v3 1/7] arch: arm: mach-rockchip: rk3288: Enable regulators in board_init   Janine Hagemann
• [U-Boot] [PATCH v3 2/7] config: phycore-rk3288_defconfig: add PHY_TI   Janine Hagemann
• [U-Boot] [PATCH v3 3/7] drivers: net: designware: Add reading of DT phy-handle node   Janine Hagemann
• [U-Boot] [PATCH v3 4/7] ARM: dts: rockchip: ADD dp83867 CLK_OUT muxing   Janine Hagemann
• [U-Boot] [PATCH v3 5/7] rockchip: rk3288-phycore: set flash1 iodomain to 1.8V   Janine Hagemann
• [U-Boot] [PATCH v3 6/7] net: gmac_rockchip: Fix a register write in rk3328_gmac_set_to_rgmii   Janine Hagemann
• [U-Boot] [PATCH v3 7/7] net: gmac_rockchip: Add handeling for RGMII_ID/RXID/TXID   Janine Hagemann
• [U-Boot] [PATCH v4 0/7] Add ethernet support for phyCORE-RK3288   Janine Hagemann
• [U-Boot] [PATCH v4 1/7] arch: arm: mach-rockchip: rk3288: Enable regulators in board_init   Janine Hagemann
• [U-Boot] [PATCH v4 2/7] config: phycore-rk3288_defconfig: add PHY_TI   Janine Hagemann
• [U-Boot] [PATCH v4 3/7] drivers: net: designware: Add reading of DT phy-handle node   Janine Hagemann
• [U-Boot] [PATCH v4 4/7] ARM: dts: rockchip: ADD dp83867 CLK_OUT muxing   Janine Hagemann
• [U-Boot] [PATCH v4 5/7] rockchip: rk3288-phycore: set flash1 iodomain to 1.8V   Janine Hagemann
• [U-Boot] [PATCH v4 6/7] net: gmac_rockchip: Fix a register write in rk3328_gmac_set_to_rgmii   Janine Hagemann
• [U-Boot] [PATCH v4 7/7] net: gmac_rockchip: Add handeling for RGMII_ID/RXID/TXID   Janine Hagemann
• [U-Boot] [PATCH v4 0/3] Expand dp83867-driver   Janine Hagemann
• [U-Boot] [PATCH v4 1/3] net: phy: ti: Add lane swapping support in the DP83867 TI's PHY driver   Janine Hagemann
• [U-Boot] [PATCH v4 2/3] net: phy: ti: Recover from "port mirroring" N/A MODE4   Janine Hagemann
• [U-Boot] [PATCH v4 3/3] net: phy: ti: Add binding for the CLK_OUT pin muxing   Janine Hagemann
• [U-Boot] [PATCH] mmc: sdhci-of-arasan: Do now show error message in case of deffered probe   Ulf Hansson
• [U-Boot] dwc2 USB host initialization issue   Bogdan Harjoc
• [U-Boot] [PATCH] mmc: dw_mmc: set host_caps mmc modes to equivalent buswidth and lower   Jan Havran
• [U-Boot] [PATCH] binman: fix a few typos in documentation   Michael Heimpold
• [U-Boot] [RFC PATCH] gpio: zynq: Setup bank_name to dev->name   Stefan Herbrechtsmeier
• [U-Boot] [PATCH 3/4] gpio: xilinx: Not read output values via regs   Stefan Herbrechtsmeier
• [U-Boot] [PATCH v2] gpio: xilinx: Not read output values via regs   Stefan Herbrechtsmeier
• [U-Boot] [PATCH] gpio: xilinx: Add support for using label property   Stefan Herbrechtsmeier
• [U-Boot] [PATCH] gpio: xilinx: Return 0 from xilinx_gpio_set_value   Stefan Herbrechtsmeier
• [U-Boot] [PATCH v2] gpio: xilinx: Add support for using label property   Stefan Herbrechtsmeier
• [U-Boot] [PATCH 01/10] dm: fdt: scan for devices under /firmware too   Rob Herring
• [U-Boot] [PATCH 0/2] Ethernet name length changes   Joe Hershberger
• [U-Boot] [PATCH v2 1/3] linux/if_ether.h: Initial import from Linux kernel v4.17   Joe Hershberger
• [U-Boot] [PATCH v2 2/3] net.h: Include linux/if_ether.h to avoid duplication   Joe Hershberger
• [U-Boot] [PATCH v2 3/3] linux/if_ether.h: Add VLAN related macros   Joe Hershberger
• [U-Boot] [PATCH] net: fman: Support both new and legacy FMan Compatibles   Joe Hershberger
• [U-Boot] [v2 patch] net: fman: Support both new and legacy FMan Compatibles   Joe Hershberger
• [U-Boot] [PATCH v3 0/7] Fixes/Addition to use the USB Ethernet gadget with the DWC3 gadget controller   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 0/7] Fixes/Addition to use the USB Ethernet gadget with the DWC3 gadget controller   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 0/7] Fixes/Addition to use the USB Ethernet gadget with the DWC3 gadget controller   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 1/7] usb: gadget: Add bcdDevice for the DWC3 USB Gadget Controller   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 2/7] net: eth-uclass: Fix for DM USB ethernet support   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 3/7] uclass: Add dev_get_uclass_index() to get the uclass/index of a device   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 4/7] dm: print the index of the device when dumping the dm tree   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 5/7] dm: convert device_get_global_by_of_offset() to device_get_global_by_ofnode()   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 6/7] device: expose the functions used to remove and unbind children of a device   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 7/7] cmd: Add bind/unbind commands to bind a device to a driver from the command line   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3 0/7] Fixes/Addition to use the USB Ethernet gadget with the DWC3 gadget controller   Jean-Jacques Hiblot
• [U-Boot] [PATCH v4 0/7] Fixes/Addition to use the USB Ethernet gadget with the DWC3 gadget controller   Jean-Jacques Hiblot
• [U-Boot] MMC_DAVINCI not compliant with CONFIG_BLK   Peter Howard
• [U-Boot] MMC_DAVINCI not compliant with CONFIG_BLK   Peter Howard
• [U-Boot] MMC_DAVINCI not compliant with CONFIG_BLK   Peter Howard
• [U-Boot] [PATCH] MMC: davinici_mmc: Enable CD and WP with DM and OF_CONTROL   Peter Howard
• [U-Boot] [PATCH] clk: at91: utmi: add timeout for utmi lock   Eugen Hristev
• [U-Boot] [PATCH 1/2] ARM: dts: Makefile: fix build for at91family   Eugen Hristev
• [U-Boot] [PATCH 2/2] at91: fix devicetree warnings   Eugen Hristev
• [U-Boot] [PATCH v2 00/30] Add support for 1wire protocol and 1wire eeproms   Eugen Hristev
• [U-Boot] [PATCH v2 01/30] w1: Add 1-Wire uclass   Eugen Hristev
• [U-Boot] [PATCH v2 02/30] w1: Add 1-Wire gpio driver   Eugen Hristev
• [U-Boot] [PATCH v2 03/30] dt-bindings: W1: w1-gpio: added bindings for w1-gpio   Eugen Hristev
• [U-Boot] [PATCH v2 04/30] W1-EEPROM: Add an W1-EEPROM uclass for 1 wire EEPROMs   Eugen Hristev
• [U-Boot] [PATCH v2 05/30] w1: identify devices with w1-eeprom uclass   Eugen Hristev
• [U-Boot] [PATCH v2 06/30] W1-EEPROM: add support for Maxim DS24 eeprom families   Eugen Hristev
• [U-Boot] [PATCH v2 07/30] dt-bindings: w1-eeprom: ds24xxx: create bindings   Eugen Hristev
• [U-Boot] [PATCH v2 08/30] W1-EEPROM: add sandbox driver   Eugen Hristev
• [U-Boot] [PATCH v2 09/30] dt-bindings: w1-eeprom: eep_sandbox: create bindings   Eugen Hristev
• [U-Boot] [PATCH v2 10/30] w1: add command for onewire protocol   Eugen Hristev
• [U-Boot] [PATCH v2 11/30] pinctrl: sandbox: add gpio onewire w1 group   Eugen Hristev
• [U-Boot] [PATCH v2 12/30] sandbox: DTS: w1: add node for one wire interface on GPIO   Eugen Hristev
• [U-Boot] [PATCH v2 13/30] configs: sandbox: add onewire w1 and sandbox eeprom   Eugen Hristev
• [U-Boot] [PATCH v2 14/30] configs: sama5d2_xplained: add onewire and eeprom drivers   Eugen Hristev
• [U-Boot] [PATCH v2 15/30] configs: sama5d3_xplained: add onewire and eeprom drivers   Eugen Hristev
• [U-Boot] [PATCH v2 16/30] configs: sama5d27_som1_ek: add onewire and eeprom drivers   Eugen Hristev
• [U-Boot] [PATCH v2 17/30] configs: sama5d2_ptc_ek: add onewire and eeprom drivers   Eugen Hristev
• [U-Boot] [PATCH v2 18/30] board: atmel: add support for pda detection   Eugen Hristev
• [U-Boot] [PATCH v2 19/30] board: sama5d2_xplained: add pda detect call at init time   Eugen Hristev
• [U-Boot] [PATCH v2 20/30] board: sama5d3_xplained: add pda detect call at init time   Eugen Hristev
• [U-Boot] [PATCH v2 21/30] board: sama5d27_som1_ek: add pda detect call at init time   Eugen Hristev
• [U-Boot] [PATCH v2 22/30] board: sama5d2_ptc_ek: add pda detect call at init time   Eugen Hristev
• [U-Boot] [PATCH v2 23/30] configs: sama5d2_xplained: add fdt overlay support   Eugen Hristev
• [U-Boot] [PATCH v2 24/30] configs: sama5d3_xplained: add fdt overlay support   Eugen Hristev
• [U-Boot] [PATCH v2 25/30] configs: sama5d2_ptc_ek: add fdt overlay support   Eugen Hristev
• [U-Boot] [PATCH v2 26/30] configs: sama5d27_som1_ek: add fdt overlay support   Eugen Hristev
• [U-Boot] [PATCH v2 27/30] ARM: dts: at91: sama5d2_xplained: add onewire connector for LCD eeprom   Eugen Hristev
• [U-Boot] [PATCH v2 28/30] ARM: dts: at91: sama5d3_xplained: add onewire connector for LCD eeprom   Eugen Hristev
• [U-Boot] [PATCH v2 29/30] ARM: dts: at91: sama5d27_som1_ek: add onewire connector for LCD eeprom   Eugen Hristev
• [U-Boot] [PATCH v2 30/30] ARM: dts: at91: sama5d2_ptc: add onewire connector for LCD eeprom   Eugen Hristev
• [U-Boot] [PATCH v3 00/34] Add support for 1wire protocol and 1wire eeproms   Eugen Hristev
• [U-Boot] [PATCH v3 01/34] w1: Add 1-Wire uclass   Eugen Hristev
• [U-Boot] [PATCH v3 02/34] w1: Add 1-Wire gpio driver   Eugen Hristev
• [U-Boot] [PATCH v3 03/34] dt-bindings: W1: w1-gpio: added bindings for w1-gpio   Eugen Hristev
• [U-Boot] [PATCH v3 04/34] W1-EEPROM: Add an W1-EEPROM uclass for 1 wire EEPROMs   Eugen Hristev
• [U-Boot] [PATCH v3 05/34] w1: identify devices with w1-eeprom uclass   Eugen Hristev
• [U-Boot] [PATCH v3 06/34] W1-EEPROM: add support for Maxim DS24 eeprom families   Eugen Hristev
• [U-Boot] [PATCH v3 07/34] dt-bindings: w1-eeprom: ds24xxx: create bindings   Eugen Hristev
• [U-Boot] [PATCH v3 08/34] W1-EEPROM: add sandbox driver   Eugen Hristev
• [U-Boot] [PATCH v3 09/34] dt-bindings: w1-eeprom: eep_sandbox: create bindings   Eugen Hristev
• [U-Boot] [PATCH v3 10/34] w1: add command for onewire protocol   Eugen Hristev
• [U-Boot] [PATCH v3 11/34] pinctrl: sandbox: add gpio onewire w1 group   Eugen Hristev
• [U-Boot] [PATCH v3 12/34] sandbox: DTS: w1: add node for one wire interface on GPIO   Eugen Hristev
• [U-Boot] [PATCH v3 13/34] configs: sandbox: add onewire w1 and sandbox eeprom   Eugen Hristev
• [U-Boot] [PATCH v3 14/34] configs: sama5d2_xplained: add onewire and eeprom drivers   Eugen Hristev
• [U-Boot] [PATCH v3 15/34] configs: sama5d3_xplained: add onewire and eeprom drivers   Eugen Hristev
• [U-Boot] [PATCH v3 16/34] configs: sama5d27_som1_ek: add onewire and eeprom drivers   Eugen Hristev
• [U-Boot] [PATCH v3 17/34] configs: sama5d2_ptc_ek: add onewire and eeprom drivers   Eugen Hristev
• [U-Boot] [PATCH v3 18/34] configs: sama5d4_xplained: add onewire and eeprom drivers   Eugen Hristev
• [U-Boot] [PATCH v3 19/34] board: atmel: add support for pda detection   Eugen Hristev
• [U-Boot] [PATCH v3 20/34] board: sama5d2_xplained: add pda detect call at init time   Eugen Hristev
• [U-Boot] [PATCH v3 21/34] board: sama5d3_xplained: add pda detect call at init time   Eugen Hristev
• [U-Boot] [PATCH v3 22/34] board: sama5d27_som1_ek: add pda detect call at init time   Eugen Hristev
• [U-Boot] [PATCH v3 23/34] board: sama5d2_ptc_ek: add pda detect call at init time   Eugen Hristev
• [U-Boot] [PATCH v3 24/34] board: sama5d4_xplained: add pda detect call at init time   Eugen Hristev
• [U-Boot] [PATCH v3 25/34] configs: sama5d2_xplained: add fdt overlay support   Eugen Hristev
• [U-Boot] [PATCH v3 26/34] configs: sama5d3_xplained: add fdt overlay support   Eugen Hristev
• [U-Boot] [PATCH v3 27/34] configs: sama5d2_ptc_ek: add fdt overlay support   Eugen Hristev
• [U-Boot] [PATCH v3 28/34] configs: sama5d27_som1_ek: add fdt overlay support   Eugen Hristev
• [U-Boot] [PATCH v3 29/34] configs: sama5d4_xplained: add fdt overlay support   Eugen Hristev
• [U-Boot] [PATCH v3 30/34] ARM: dts: at91: sama5d2_xplained: add onewire connector for LCD eeprom   Eugen Hristev
• [U-Boot] [PATCH v3 31/34] ARM: dts: at91: sama5d3_xplained: add onewire connector for LCD eeprom   Eugen Hristev
• [U-Boot] [PATCH v3 32/34] ARM: dts: at91: sama5d27_som1_ek: add onewire connector for LCD eeprom   Eugen Hristev
• [U-Boot] [PATCH v3 33/34] ARM: dts: at91: sama5d2_ptc: add onewire connector for LCD eeprom   Eugen Hristev
• [U-Boot] [PATCH v3 34/34] ARM: dts: at91: sama5d4_xplained: add onewire connector for LCD eeprom   Eugen Hristev
• [U-Boot] [PATCH] cmd: led.c: fix coding style   Akee Huang
• [U-Boot] [RESEND 1/3] imx: mx7: psci: add cpu hotplug support   Anson Huang
• [U-Boot] [RESEND 2/3] imx: mx7: add gpc initialization for low power mode   Anson Huang
• [U-Boot] [RESEND 3/3] imx: mx7: add system suspend/resume support   Anson Huang
• [U-Boot] [RESEND 1/3] imx: mx7: psci: add cpu hotplug support   Anson Huang
• [U-Boot] [RESEND 2/3] imx: mx7: add gpc initialization for low power mode   Anson Huang
• [U-Boot] [RESEND 3/3] imx: mx7: add system suspend/resume support   Anson Huang
• [U-Boot] [RESEND PATCH V2 1/3] imx: mx7: psci: improve cpu hotplug flow   Anson Huang
• [U-Boot] [RESEND PATCH V2 2/3] imx: mx7: add gpc initialization for low power mode   Anson Huang
• [U-Boot] [RESEND PATCH V2 3/3] imx: mx7: add system suspend/resume support   Anson Huang
• [U-Boot] [RESEND 1/3] imx: mx7: psci: add cpu hotplug support   Anson Huang
• [U-Boot] [RESEND PATCH V2 3/3] imx: mx7: add system suspend/resume support   Anson Huang
• [U-Boot] [RESEND PATCH V2 3/3] imx: mx7: add system suspend/resume support   Anson Huang
• [U-Boot] arm: omap: configs: various: Remove references to OMAP34XX_UARTx   Grazvydas Ignotas
• [U-Boot] [PATCH] omap3: pandora: Enable DM_SERIAL   Grazvydas Ignotas
• [U-Boot] arm: omap: configs: various: Remove references to OMAP34XX_UARTx   Grazvydas Ignotas
• [U-Boot] Get Phy device ID for non standard phy   Priyanka Jain
• [U-Boot] [PATCH] armv8: lsch3: Add support of serdes3 module   Priyanka Jain
• [U-Boot] [PATCH] armv8:fsl-layerscape: Add support for Chassis 3.2   Priyanka Jain
• [U-Boot] [PATCH] phy: Add 25G_AUI, XLAUI, CAUI2, CAUI4 related macros   Priyanka Jain
• [U-Boot] Can't boot my FIT image: 'Could not find configuration node'   Grant Jurgensen
• [U-Boot] Can't boot my FIT image: 'Could not find configuration node'   Grant Jurgensen
• [U-Boot] [PATCH 1/3] arm: exynos4: fix warning of dts   Minkyu Kang
• [U-Boot] [PATCH v2 0/8] ARM: Odroid XU3: Enable DM_MMC support which is necessary for CONFIG_BLK   Minkyu Kang
• [U-Boot] [PATCH 1/3] arm: exynos4: fix warning of dts   Minkyu Kang
• [U-Boot] [PATCH 2/3] arm: exynos5: fix warning of dts   Minkyu Kang
• [U-Boot] [PATCH 3/3] arm: spring: fix alias of mmc correctly   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [PATCH 0/1] mtd: nand: fsl-ifc: Fix handling of bitflips   Kurt Kanzenbach
• [U-Boot] [PATCH 1/1] mtd: nand: fsl_ifc: Fix handling of bitflips in erased pages   Kurt Kanzenbach
• [U-Boot] [PATCH 1/1] mtd: nand: fsl_ifc: Fix handling of bitflips in erased pages   Kurt Kanzenbach
• [U-Boot] [PATCH 1/1] mtd: nand: fsl_ifc: Fix handling of bitflips in erased pages   Kurt Kanzenbach
• [U-Boot] [PATCH] amlogic: board p212: Fix Ethernet PHY init   Jasper Kcoding
• [U-Boot] 2018.09-rc1 breakage on orangepi pc2   Mark Kettenis
• [U-Boot] 2018.09-rc1 breakage on orangepi pc2   Mark Kettenis
• [U-Boot] 2018.09-rc1 breakage on orangepi pc2   Mark Kettenis
• [U-Boot] [RFC 1/1] efi_loader: relocate pointer to tables   Mark Kettenis
• [U-Boot] [PATCH v3 2/3] efi_loader: ARM: run EFI payloads non-secure   Mark Kettenis
• [U-Boot] Converting to SPL_OF_CONTROL   Alex Kiernan
• [U-Boot] Converting to SPL_OF_CONTROL   Alex Kiernan
• [U-Boot] Converting to SPL_OF_CONTROL   Alex Kiernan
• [U-Boot] Converting to SPL_OF_CONTROL   Alex Kiernan
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Alex Kiernan
• [U-Boot] Booting into winCE .nb0 without access to source files   Troy Kisky
• [U-Boot] Regression on ESPRESSObin / status of upstreaming   Jan Kiszka
• [U-Boot] mtd: spi: Full DM conversion timeline   Ashish Kumar
• [U-Boot] [PATCH] ls1088ardb_pb: Add support for ls1088ardb_pb board.   Pramod Kumar
• [U-Boot] [PATCH] ls1088ardb_pb: Add support for ls1088ardb_pb board.   Pramod Kumar
• [U-Boot] [PATCH] ls1012afrwy: Add ls1012afrwy revC board support.   Pramod Kumar
• [U-Boot] [PATCH v2] ls1088ardb_pb: Add support for ls1088ardb_pb board.   Pramod Kumar
• [U-Boot] [PATCH] ls1088ardb_pb: Add support for ls1088ardb_pb board.   Prabhakar Kushwaha
• [U-Boot] [PATCH] driver: net: fsl-mc: Memset MC reserve red memory before usage   Prabhakar Kushwaha
• [U-Boot] [PATCH] driver: net: fsl-mc: Memset MC reserve red memory before usage   Prabhakar Kushwaha
• [U-Boot] [PATCH] driver: net: fsl-mc: Memset MC reserve red memory before usage   Prabhakar Kushwaha
• [U-Boot] [PATCH][v2] driver: net: fsl-mc: Memset MC reserve ram memory before usage   Prabhakar Kushwaha
• [U-Boot] [PATCH][v3] driver: net: fsl-mc: Memset MC reserve ram memory before usage   Prabhakar Kushwaha
• [U-Boot] u-boot release and feature set   Prabhakar Kushwaha
• [U-Boot] u-boot release and feature set   Prabhakar Kushwaha
• [U-Boot] [PATCH v2 00/18] spi: mpc8xxx: DM conversion   Christophe LEROY
• [U-Boot] [PATCH v2 00/18] spi: mpc8xxx: DM conversion   Christophe LEROY
• [U-Boot] [PATCH v5 00/27] SPI-NAND support   Jose Landeros
• [U-Boot] [PATCH] env: common: load read-only variables after reset   Yaniv Levinsky
• [U-Boot] [PATCH 1/2] board: advantech: dms-ba16: GBE MAC addr support in kernel bootargs   Ken Lin
• [U-Boot] [PATCH 2/2] board: advantech: dms-ba16:: add the Q7 DualLite support   Ken Lin
• [U-Boot] [RFC] efi_loader: workaround for EDK2's shell.efi   Leif Lindholm
• [U-Boot] [PATCH 0/4] Topic board support updates   Mike Looijmans
• [U-Boot] [PATCH 1/4] topic-miamiplus: Run CPU at 800MHz for speedgrade-2   Mike Looijmans
• [U-Boot] [PATCH 2/4] board: topic_miamilite: Support cost-reduced version   Mike Looijmans
• [U-Boot] [PATCH 3/4] configs/topic_miami.h: Use same partitioning for USB boot as for SD   Mike Looijmans
• [U-Boot] [PATCH 4/4] board: topic-miamiplus: Run IO PLL at 1000 MHz   Mike Looijmans
• [U-Boot] [PATCH v4 1/8] armv8: enable BLK code configuration   Y.b. Lu
• [U-Boot] [PATCH v5 1/8] dm: mmc: use block layer in mmc driver   Y.b. Lu
• [U-Boot] [PATCH v5 3/8] Enable CONFIG_BLK and CONFIG_DM_MMC to Kconfig   Y.b. Lu
• [U-Boot] [PATCH 2/3] scsi: ceva: add ls1043a soc support   Peng Ma
• [U-Boot] [PATCH 2/3] scsi: ceva: add ls1043a soc support   Peng Ma
• [U-Boot] [PATCH 1/3, v2] armv8: dts: fsl-ls1043a: add sata node support   Peng Ma
• [U-Boot] [PATCH 2/3,v2] scsi: ceva: add ls1043a soc support   Peng Ma
• [U-Boot] [PATCH 3/3, v2] arm64: ls1043aqds: enable DM support for sata   Peng Ma
• [U-Boot] [PATCH 1/4] armv7: fsl: remove sata support   Peng Ma
• [U-Boot] [PATCH 2/4] armv7: dts: fsl-ls1021a: add sata node support enable sata for ls1021a-qds and ls1021a-twr   Peng Ma
• [U-Boot] [PATCH 3/4] arm: ls1021atwr: enable DM support for sata   Peng Ma
• [U-Boot] [PATCH 4/4] scsi: ceva: add ls1021a soc support.   Peng Ma
• [U-Boot] [PATCH 3/3, v2] arm64: ls1043aqds: enable DM support for sata   Peng Ma
• [U-Boot] [PATCH 3/4] arm: ls1021atwr: enable DM support for sata   Peng Ma
• [U-Boot] [PATCH 3/3, v2] arm64: ls1043aqds: enable DM support for sata   Peng Ma
• [U-Boot] [PATCH v1 9/9] ARM: Odroid XU3: Modify Odroid XU3 config to boot by default from SD card   Lukasz Majewski
• [U-Boot] [PATCH v2 0/8] ARM: Odroid XU3: Enable DM_MMC support which is necessary for CONFIG_BLK   Lukasz Majewski
• [U-Boot] [PATCH v2 1/8] ARM: dw_mmc: Exclude dwmci Exynos priv_data allocation from exynos_dwmci_get_config()   Lukasz Majewski
• [U-Boot] [PATCH v2 2/8] ARM: Odroid XU3: config: Disable SDHCI support in the Odroid XU3   Lukasz Majewski
• [U-Boot] [PATCH v2 3/8] ARM: Odroid XU3: Enable driver model support for MMC (DM_MMC)   Lukasz Majewski
• [U-Boot] [PATCH v2 4/8] ARM: Odroid XU3: Fix autoboot.cmd to use ${mmcbootdev} instead of hardcoded 0   Lukasz Majewski
• [U-Boot] [PATCH v2 5/8] ARM: Odroid XU3: Adjust BOOT_TARGET_DEVICES to allow booting from SD card (mmc2)   Lukasz Majewski
• [U-Boot] [PATCH v2 6/8] ARM: Odroid XU3: MAINTAINERS: Add a co-maintainer for OdroidXU3   Lukasz Majewski
• [U-Boot] [PATCH v2 7/8] ARM: Odroid XU3: Fix the dwmci_exynos *priv data assignment for DM_MMC (sdr_timing)   Lukasz Majewski
• [U-Boot] [PATCH v2 8/8] ARM: Odroid XU3: Modify exynos dw_mmc driver to support Odroid XU3 in DM MMC   Lukasz Majewski
• [U-Boot] BUG num banks 8 exceeds hardcoded limit 4   Lukasz Majewski
• [U-Boot] [PATCH v4 0/7] Fixes/Addition to use the USB Ethernet gadget with the DWC3 gadget controller   Lukasz Majewski
• [U-Boot] [PATCH v2] fdt_support: Use VLA instead of MEMORY_BANKS_MAX   Lukasz Majewski
• [U-Boot] [PATCH] fdt_support: Use CONFIG_NR_DRAM_BANKS if necessary   Lukasz Majewski
• [U-Boot] [PATCH 3/3] bootcount: add DM-based backing store for bootcount   Lukasz Majewski
• [U-Boot] [GIT] Pull request: u-boot-dfu (14.08.2018)   Lukasz Majewski
• [U-Boot] [PATCH] ARM: display5: config: Replace hardcoded size of kernel (0x2000) with variable (fitImg_fw_sz)   Lukasz Majewski
• [U-Boot] [PATCH] ARM: display5: Remove "factory procedure" from display5 board config   Lukasz Majewski
• [U-Boot] [PATCH 1/4] ARM: bootscript: Remove hard-coded rootpath from K+P's tpcboot.cmd   Lukasz Majewski
• [U-Boot] [PATCH 2/4] ARM: bootscript: Replace tftpboot with dhcp when downloading kernel   Lukasz Majewski
• [U-Boot] [PATCH 3/4] ARM: bootscript: Fix the nfsargs and addip in K+P's tpcboot.cmd   Lukasz Majewski
• [U-Boot] [PATCH 4/4] ARM: bootscript: For nfsargs only use rootpath (and remove not needed serverip)   Lukasz Majewski
• [U-Boot] [PATCH] stm32f7: board: Fix memory init   Vikas Manocha
• [U-Boot] [PATCH] arm: stm32: Remove redundant thumb build selection   Vikas Manocha
• [U-Boot] [PATCH] arm: armv7m: remove un-necessary If then instruction   Vikas Manocha
• [U-Boot] [PATCH] arm: armv7m: clean up armv7m unified code compilation   Vikas Manocha
• [U-Boot] [PATCH 2/6] x86: Remove support for Advantech SOM-6896   George McCollister
• [U-Boot] xyz-modem: Change getc timeout loop waiting   Tomas Melin
• [U-Boot] xyz-modem: Change getc timeout loop waiting   Tomas Melin
• [U-Boot] boot a bios/uefi with x86_64, without grub   Bin Meng
• [U-Boot] [PATCH 1/2] lib: bitrev: Sync with Linux kernel v4.17   Bin Meng
• [U-Boot] [PATCH 2/2] sandbox: Enable bitrev library build   Bin Meng
• [U-Boot] Two CRC32 implementation in U-Boot, why?   Bin Meng
• [U-Boot] SUCCESS: Building U-Boot for MIPS64 on Windows7   Bin Meng
• [U-Boot] [PATCH v2 10/21] test: dm: pci: Add tests for configuration space access   Bin Meng
• [U-Boot] [PATCH v2 15/21] sandbox: Update test.dts for dynamic PCI device driver matching   Bin Meng
• [U-Boot] [PATCH v2 1/2] lib: bitrev: Sync with Linux kernel v4.17   Bin Meng
• [U-Boot] [PATCH v2 2/2] sandbox: Enable bitrev library build   Bin Meng
• [U-Boot] [PATCH v3 00/21] dm: pci: Various fixes and test cases update   Bin Meng
• [U-Boot] [PATCH v3 01/21] pci: Remove 440ep-specific macros   Bin Meng
• [U-Boot] [PATCH v3 02/21] dm: Correct typos in uclass_first/next_device_check()   Bin Meng
• [U-Boot] [PATCH v3 03/21] dm: core: Add ofnode function to read PCI vendor and device id   Bin Meng
• [U-Boot] [PATCH v3 04/21] dm: pci: Extract vendor/device id in child_post_bind()   Bin Meng
• [U-Boot] [PATCH v3 05/21] dm: pci: Fix scanning multi-function device   Bin Meng
• [U-Boot] [PATCH v3 06/21] test: dm: pci: Remove unnecessary steps in dm_test_pci_swapcase()   Bin Meng
• [U-Boot] [PATCH v3 07/21] test: dm: pci: Test more than one device on the same bus   Bin Meng
• [U-Boot] [PATCH v3 08/21] pci: sandbox: swap_case: Preserve space indicator bit in BAR registers   Bin Meng
• [U-Boot] [PATCH v3 09/21] test: dm: pci: Test more than one PCI host controller   Bin Meng
• [U-Boot] [PATCH v3 10/21] test: dm: pci: Add tests for configuration space access   Bin Meng
• [U-Boot] [PATCH v3 11/21] pci: sandbox: emul: Fix the call to pci_bus_find_devfn()   Bin Meng
• [U-Boot] [PATCH v3 12/21] dm: pci: Assign correct driver data when binding a driver   Bin Meng
• [U-Boot] [PATCH v3 13/21] pci: sandbox: Support dynamically binding device driver   Bin Meng
• [U-Boot] [PATCH v3 14/21] pci: sandbox: swap_case: Declare dynamic driver matching   Bin Meng
• [U-Boot] [PATCH v3 15/21] sandbox: Update test.dts for dynamic PCI device driver matching   Bin Meng
• [U-Boot] [PATCH v3 16/21] test: dm: pci: Test driver binding with driver data provided   Bin Meng
• [U-Boot] [PATCH v3 17/21] pci: sandbox: emul: Rename priv structure   Bin Meng
• [U-Boot] [PATCH v3 18/21] test: dm: pci: Add tests for mixed static and dynamic devices on the same bus   Bin Meng
• [U-Boot] [PATCH v3 19/21] pci: Add all known capability and extended capability ids   Bin Meng
• [U-Boot] [PATCH v3 20/21] dm: pci: Add APIs to find capability and extended capability   Bin Meng
• [U-Boot] [PATCH v3 21/21] test: dm: pci: Add cases for finding PCI capability APIs   Bin Meng
• [U-Boot] Two CRC32 implementation in U-Boot, why?   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] Two CRC32 implementation in U-Boot, why?   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH v1] Makefile: Don't generate position independent code   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Bin Meng
• [U-Boot] [PATCH v1] Makefile: Don't generate position independent code   Bin Meng
• [U-Boot] [PATCH 1/6] x86: coreboot: Add generic coreboot payload support   Bin Meng
• [U-Boot] [PATCH 2/6] x86: Remove support for Advantech SOM-6896   Bin Meng
• [U-Boot] [PATCH 3/6] x86: dts: Remove coreboot_fb.dtsi   Bin Meng
• [U-Boot] [PATCH 4/6] x86: tsc: Try hardware calibration first   Bin Meng
• [U-Boot] [PATCH 5/6] x86: coreboot: Add default TSC frequency in the device tree   Bin Meng
• [U-Boot] [PATCH 6/6] x86: efi: payload: Add default TSC frequency in the device tree   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH 4/6] x86: tsc: Try hardware calibration first   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH] Revert "Revert "fdt_support: Use CONFIG_NR_DRAM_BANKS if defined""   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Bin Meng
• [U-Boot] [PATCH 1/6] x86: coreboot: Add generic coreboot payload support   Bin Meng
• [U-Boot] [PATCH 2/6] x86: Remove support for Advantech SOM-6896   Bin Meng
• [U-Boot] [PATCH 3/6] x86: dts: Remove coreboot_fb.dtsi   Bin Meng
• [U-Boot] [PATCH 4/6] x86: tsc: Try hardware calibration first   Bin Meng
• [U-Boot] [PATCH 5/6] x86: coreboot: Add default TSC frequency in the device tree   Bin Meng
• [U-Boot] [PATCH 6/6] x86: efi: payload: Add default TSC frequency in the device tree   Bin Meng
• [U-Boot] Please pull u-boot-x86   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH 1/3] x86: Include bss subsections in linker script   Bin Meng
• [U-Boot] [PATCH 2/3] x86: Enable -fdata-sections always   Bin Meng
• [U-Boot] [PATCH 1/8][RESEND] powerpc/dts: setup fdt blob at __init_end   Bin Meng
• [U-Boot] [PATCH 2/8][RESEND] powerpc/dts: makefile changes to clean and build dts   Bin Meng
• [U-Boot] [PATCH 3/8][RESEND] binman: Add a new "start-pos" property in section class   Bin Meng
• [U-Boot] [PATCH 4/8][RESEND] binman: Add support for powerpc 'bootpg + resetvec' entry   Bin Meng
• [U-Boot] [PATCH 5/8][RESEND] powerpc: mpc85xx: select BINMAN by default   Bin Meng
• [U-Boot] [PATCH 6/8][RESEND] powerpc: dts: add u-boot.dtsi and mpc85xx-u-boot.dtsi   Bin Meng
• [U-Boot] [PATCH 7/8][RESEND] powerpc: mpc85xx: Use binman to embed dtb inside u-boot   Bin Meng
• [U-Boot] [PATCH 8/8][RESEND] powerpc: dts: Enable device tree support for T2080QDS   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] Unaligned memory accesses exception   Bin Meng
• [U-Boot] [PATCH v1 2/2] x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters   Bin Meng
• [U-Boot] Unaligned memory accesses exception   Bin Meng
• [U-Boot] [PATCH] binman: fix a few typos in documentation   Bin Meng
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH 1/4] x86: efi: payload: Install E820 map from EFI memory map   Bin Meng
• [U-Boot] [PATCH 2/4] efi: stub: Pass EFI system table address to U-Boot payload   Bin Meng
• [U-Boot] [PATCH 3/4] x86: zimage: Support booting Linux kernel from an EFI payload   Bin Meng
• [U-Boot] [PATCH 4/4] x86: efi: payload: Turn on acpi in the kernel command line   Bin Meng
• [U-Boot] [PATCH] x86: zimage: Remove acpi_rsdp_addr propagation to kernel boot parameters   Bin Meng
• [U-Boot] [PATCH v2 07/13] x86: Fix signed shift overflow in MSR_IA32_APICBASE_BASE   Bin Meng
• [U-Boot] [PATCH v2 1/8] powerpc/dts: Define '_end' symbol in mpc85xx u-boot lds files   Bin Meng
• [U-Boot] [PATCH v2 2/8] powerpc/dts: Makefile changes to clean and build dts   Bin Meng
• [U-Boot] [PATCH v2 3/8] binman: Add a new "skip-at-start" property in Section class   Bin Meng
• [U-Boot] [PATCH v2 4/8] binman: Add support for Powerpc mpc85xx 'bootpg + resetvec' entry   Bin Meng
• [U-Boot] [PATCH v2 5/8] powerpc: mpc85xx: Select BINMAN by default   Bin Meng
• [U-Boot] [PATCH v2 6/8] powerpc: mpc85xx: Use binman to embed dtb inside u-boot   Bin Meng
• [U-Boot] [PATCH v2 7/8] powerpc: dts: Add u-boot.dtsi to use binman for MPC85xx boards   Bin Meng
• [U-Boot] [PATCH v2 8/8] powerpc: dts: Enable device tree support for T2080QDS   Bin Meng
• [U-Boot] [PATCH v2 1/8] powerpc/dts: Define '_end' symbol in mpc85xx u-boot lds files   Bin Meng
• [U-Boot] [PATCH V2 1/2] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] [PATCH 4/4] x86: efi: payload: Turn on acpi in the kernel command line   Bin Meng
• [U-Boot] [PATCH 1/4] x86: efi: payload: Install E820 map from EFI memory map   Bin Meng
• [U-Boot] [PATCH 2/4] efi: stub: Pass EFI system table address to U-Boot payload   Bin Meng
• [U-Boot] [PATCH 3/4] x86: zimage: Support booting Linux kernel from an EFI payload   Bin Meng
• [U-Boot] [PATCH 4/4] x86: efi: payload: Turn on acpi in the kernel command line   Bin Meng
• [U-Boot] [PATCH] x86: zimage: Remove acpi_rsdp_addr propagation to kernel boot parameters   Bin Meng
• [U-Boot] Please pull u-boot-x86   Bin Meng
• [U-Boot] [PATCH 00/12] riscv: Add QEMU virt board support   Bin Meng
• [U-Boot] [PATCH 01/12] riscv: kconfig: Normalize architecture name spelling   Bin Meng
• [U-Boot] [PATCH 02/12] riscv: Remove setup.h   Bin Meng
• [U-Boot] [PATCH 03/12] riscv: bootm: Correct the 1st kernel argument to hart id   Bin Meng
• [U-Boot] [PATCH 04/12] riscv: Remove mach type   Bin Meng
• [U-Boot] [PATCH 05/12] riscv: Move the linker script to the CPU root directory   Bin Meng
• [U-Boot] [PATCH 06/12] riscv: Fix coding style issues in the linker script   Bin Meng
• [U-Boot] [PATCH 07/12] riscv: Explicitly pass -march and -mabi to the compiler   Bin Meng
• [U-Boot] [PATCH 08/12] riscv: Add a helper routine to print CPU information   Bin Meng
• [U-Boot] [PATCH 09/12] riscv: Make start.S available for all targets   Bin Meng
• [U-Boot] [PATCH 10/12] riscv: ae350: Clean up mixed tabs and spaces in the dts   Bin Meng
• [U-Boot] [PATCH 11/12] riscv: kconfig: Select DM and OF_CONTROL   Bin Meng
• [U-Boot] [PATCH 12/12] riscv: Add QEMU virt board support   Bin Meng
• [U-Boot] [PATCH] travis: Use kernel.org pre-built toolchain for riscv   Bin Meng
• [U-Boot] [PATCH V2 1/2] pci: Support parsing PCI controller DT subnodes   Bin Meng
• [U-Boot] mmc: different SD SCR read from U-Boot than from Linux   Damien Miliche
• [U-Boot] BUG num banks 8 exceeds hardcoded limit 4   Anand Moon
• [U-Boot] [PATCH] common: fdt: set the value of MEMORY_BANKS_MAX to 8   Anand Moon
• [U-Boot] BUG num banks 8 exceeds hardcoded limit 4   Anand Moon
• [U-Boot] fdt_support: Use CONFIG_NR_DRAM_BANKS if necessary   Anand Moon
• [U-Boot] fdt_support: Use CONFIG_NR_DRAM_BANKS if necessary   Anand Moon
• [U-Boot] [PATCH] tools: kwboot: Make kwboot more robust on a38x   Jon Nettleton
• [U-Boot] [PATCH] tools: kwboot: Make kwboot more robust on a38x   Jon Nettleton
• [U-Boot] [PATCH 4/5] cmd: mvebu: bubt: Add support for legacy Marvell SoCs   Jon Nettleton
• [U-Boot] [PATCH V5 00/31] imx: add i.MX8M support and i.MX8MQ EVK   Jon Nettleton
• [U-Boot] Converting to SPL_OF_CONTROL   Johann Neuhauser
• [U-Boot] [PATCH] SPL: fit signature: don´t strip off signature node and sub nodes from dtb   Johann Neuhauser
• [U-Boot] [PATCH] SPL: fit signature: don´t strip off signature node and sub nodes from dtb   Johann Neuhauser
• [U-Boot] U-Boot: Verified Boot: signed configuration and mix and match attack   Johann Neuhauser
• [U-Boot] Can't boot my FIT image: 'Could not find configuration node'   Johann Neuhauser
• [U-Boot] Booting into winCE .nb0 without access to source files   Michael Newton
• [U-Boot] U-Boot RPI bmp display isn't visible   Christian Nienhaus
• [U-Boot] [PATCH 0/3] Fix for rare beaglebone ethernet failures   Sekhar Nori
• [U-Boot] [PATCH 1/3] drivers: net: cpsw: add support to update phy address   Sekhar Nori
• [U-Boot] [PATCH 2/3] board: ti: am335x: add support to fixup phy address   Sekhar Nori
• [U-Boot] [PATCH 3/3] configs: am335x_evm: enable OF_BOARD_SETUP   Sekhar Nori
• [U-Boot] [PATCH] Revert "arm: mvebu: fix boot from UART when in fallback mode"   Sean Nyekjær
• [U-Boot] [PATCH v2 2/2] ARM: mach-mvebu: handle fall-back to UART boot   Sean Nyekjær
• [U-Boot] [RFC] cmd: add bootslot command to select/boot slot based on boot counts   Sean Nyekjær
• [U-Boot] [PATCH v2 2/2] ARM: mach-mvebu: handle fall-back to UART boot   Sean Nyekjær
• [U-Boot] [PATCH] ram: stm32_sdram: Adds stm32f746-disco fix for HardFault at booting   Mark Olsson
• [U-Boot] [PATCH v3 1/1] avb2.0: add get_size_of_partition()   Igor Opaniuk
• [U-Boot] [PATCH v3 1/1] avb2.0: add get_size_of_partition()   Igor Opaniuk
• [U-Boot] [PATCH 10/10] avb_verify: support using OP-TEE TA AVB   Igor Opaniuk
• [U-Boot] [PATCH 02/10] cmd: avb read_rb: print rb_idx in hexadecimal   Igor Opaniuk
• [U-Boot] [PATCH 6/7] common: avb_verify: Fix never-occurring avb_free(ops_data)   Igor Opaniuk
• [U-Boot] [PATCH 7/7] common: avb_verify: Fix division by zero in mmc_byte_io()   Igor Opaniuk
• [U-Boot] [PATCH 1/7] libavb: Handle wrong hashtree_error_mode in avb_append_options()   Igor Opaniuk
• [U-Boot] [PATCH 2/7] common: avb_verify: Fix invalid 'for' loop condition   Igor Opaniuk
• [U-Boot] [PATCH 3/7] common: kconfig: Mark AVB_VERIFY as dependent on PARTITION_UUIDS   Igor Opaniuk
• [U-Boot] [PATCH 4/7] common: avb_verify: Make local data static   Igor Opaniuk
• [U-Boot] [PATCH 5/7] common: avb_verify: Fix memory leaks   Igor Opaniuk
• [U-Boot] [PATCH 03/10] mmc: rpmb: add mmc_rpmb_route_frames()   Igor Opaniuk
• [U-Boot] [PATCH 04/10] Add UCLASS_TEE for Trusted Execution Environment   Igor Opaniuk
• [U-Boot] [PATCH 10/10] avb_verify: support using OP-TEE TA AVB   Igor Opaniuk
• [U-Boot] [PATCH 06/10] tee: add OP-TEE driver   Igor Opaniuk
• [U-Boot] [PATCH 09/10] tee: optee: support AVB trusted application   Igor Opaniuk
• [U-Boot] [PATCH 08/10] optee: support routing of rpmb data frames to mmc   Igor Opaniuk
• [U-Boot] [PATCH 3/7] common: kconfig: Mark AVB_VERIFY as dependent on PARTITION_UUIDS   Igor Opaniuk
• [U-Boot] [PATCH 09/10] tee: optee: support AVB trusted application   Igor Opaniuk
• [U-Boot] [PATCH 00/10] AVB using OP-TEE   Igor Opaniuk
• [U-Boot] [PATCH] openrd: Once again shrink binary size   Chris Packham
• [U-Boot] [PATCH] openrd: Once again shrink binary size   Chris Packham
• [U-Boot] [PATCH v2 3/3] configs: kirkwood: Move RTC_MV to DM and Kconfig   Chris Packham
• [U-Boot] [PATCH v3 1/3] configs: kirkwood: ds109: switch to DM_I2C   Chris Packham
• [U-Boot] [PATCH v3 2/3] configs: move RTC_MV config from mv-plug-common.h to boards   Chris Packham
• [U-Boot] [PATCH v3 3/3] configs: kirkwood: Move RTC_MV to DM and Kconfig   Chris Packham
• [U-Boot] [PATCH] tools: kwboot: Make kwboot more robust on a38x   Chris Packham
• [U-Boot] [PATCH] tools: kwboot: Make kwboot more robust on a38x   Chris Packham
• [U-Boot] [PATCH] tools: kwboot: Make kwboot more robust on a38x   Chris Packham
• [U-Boot] [PATCH] tools: kwboot: Make kwboot more robust on a38x   Chris Packham
• [U-Boot] [PATCH] Revert "arm: mvebu: fix boot from UART when in fallback mode"   Chris Packham
• [U-Boot] [PATCH] Revert "arm: mvebu: fix boot from UART when in fallback mode"   Chris Packham
• [U-Boot] [PATCH v2 1/2] Revert "arm: mvebu: fix boot from UART when in fallback mode"   Chris Packham
• [U-Boot] [PATCH v2 2/2] ARM: mach-mvebu: handle fall-back to UART boot   Chris Packham
• [U-Boot] [PATCH] tools: kwboot: Make kwboot more robust on a38x   Chris Packham
• [U-Boot] mkimage (kwbimage) unmapping more bytes than it maps   Chris Packham
• [U-Boot] [PATCH] tools: mkimage: Ensure munmap unmaps the same length that was mapped   Chris Packham
• [U-Boot] [PATCH] cmd: mii: don't check address for 'device' subcommand   Hector Palacios
• [U-Boot] Query on FAT file system   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] Corrected checksum failure handling of FDT within FIT image   Patz, Heiko
• [U-Boot] hwmon in current uboot   Andy Pont
• [U-Boot] Booting into winCE .nb0 without access to source files   Andy Pont
• [U-Boot] [EXT] Re: [PATCH 4/5] cmd: mvebu: bubt: Add support for legacy Marvell SoCs   Kostya Porotchkin
• [U-Boot] [PATCH v1] arm: at91: wdt: Convert watchdog driver to dm   Prasanthi.Chellakumar
• [U-Boot] [PATCH v2] cmd: fastboot: Validate user input   Sam Protsenko
• [U-Boot] [PATCH v3 1/1] avb2.0: add get_size_of_partition()   Sam Protsenko
• [U-Boot] [PATCH v4 1/2] common: Add support for Android DT image   Sam Protsenko
• [U-Boot] [PATCH v4 2/2] cmd: Add dtimg command   Sam Protsenko
• [U-Boot] [PATCH] net: fman: Support both new and legacy FMan Compatibles   Zhao Qiang
• [U-Boot] [v2 patch] net: fman: Support both new and legacy FMan Compatibles   Zhao Qiang
• [U-Boot] [v3 patch] net: fman: Support both new and legacy FMan Compatibles   Zhao Qiang
• [U-Boot] [PATCH v5 00/27] SPI-NAND support   Miquel Raynal
• [U-Boot] [PATCH v6 00/27] SPI-NAND support   Miquel Raynal
• [U-Boot] [PATCH v6 01/27] mtd: Fallback to ->_read/write_oob() when ->_read/write() is missing   Miquel Raynal
• [U-Boot] [PATCH v6 02/27] mtd: Uninline mtd_write_oob and move it to mtdcore.c   Miquel Raynal
• [U-Boot] [PATCH v6 03/27] mtd: Add sanity checks in mtd_write/read_oob()   Miquel Raynal
• [U-Boot] [PATCH v6 04/27] mtd: Fallback to ->_read/write() when ->_read/write_oob() is missing   Miquel Raynal
• [U-Boot] [PATCH v6 05/27] mtd: add get/set of_node/flash_node helpers   Miquel Raynal
• [U-Boot] [PATCH v6 06/27] mtd: fix build issue with includes   Miquel Raynal
• [U-Boot] [PATCH v6 07/27] mtd: move definitions to enlarge their range   Miquel Raynal
• [U-Boot] [PATCH v6 08/27] mtd: move all flash categories inside MTD submenu   Miquel Raynal
• [U-Boot] [PATCH v6 09/27] mtd: move NAND files into a raw/ subdirectory   Miquel Raynal
• [U-Boot] [PATCH v6 10/27] mtd: rename nand into rawnand in Kconfig prompt   Miquel Raynal
• [U-Boot] [PATCH v6 11/27] mtd: nand: Add core infrastructure to deal with NAND devices   Miquel Raynal
• [U-Boot] [PATCH v6 12/27] mtd: nand: Pass mode information to nand_page_io_req   Miquel Raynal
• [U-Boot] [PATCH v6 13/27] spi: Extend the core to ease integration of SPI memory controllers   Miquel Raynal
• [U-Boot] [PATCH v6 14/27] mtd: nand: Add core infrastructure to support SPI NANDs   Miquel Raynal
• [U-Boot] [PATCH v6 15/27] mtd: spinand: Add initial support for Micron MT29F2G01ABAGD   Miquel Raynal
• [U-Boot] [PATCH v6 16/27] mtd: spinand: Add initial support for Winbond W25M02GV   Miquel Raynal
• [U-Boot] [PATCH v6 17/27] mtd: spinand: Add initial support for the MX35LF1GE4AB chip   Miquel Raynal
• [U-Boot] [PATCH v6 18/27] mtd: spinand: Add initial support for the MX35LF2GE4AB chip   Miquel Raynal
• [U-Boot] [PATCH v6 19/27] dt-bindings: Add bindings for SPI NAND devices   Miquel Raynal
• [U-Boot] [PATCH v6 20/27] mtd: declare MTD_PARTITIONS symbol in Kconfig   Miquel Raynal
• [U-Boot] [PATCH v6 21/27] cmd: ubi: delete useless and misleading definitions   Miquel Raynal
• [U-Boot] [PATCH v6 22/27] cmd: mtdparts: accept spi-nand devices   Miquel Raynal
• [U-Boot] [PATCH v6 23/27] cmd: mtdparts: add a generic 'mtdparts' parser   Miquel Raynal
• [U-Boot] [PATCH v6 24/27] cmd: mtdparts: remove useless 'mtdparts=' prefix   Miquel Raynal
• [U-Boot] [PATCH v6 25/27] mtd: uclass: add probe function   Miquel Raynal
• [U-Boot] [PATCH v6 26/27] cmd: mtd: add 'mtd' command   Miquel Raynal
• [U-Boot] [PATCH v6 27/27] cmd: mtdparts: try to probe the MTD devices as a fallback   Miquel Raynal
• [U-Boot] [PATCH v6 00/27] SPI-NAND support   Miquel Raynal
• [U-Boot] [PATCH v6 00/27] SPI-NAND support   Miquel Raynal
• [U-Boot] [PATCH v6 00/27] SPI-NAND support   Miquel Raynal
• [U-Boot] [PATCH 1/2] tpm: sandbox: fix wrong check on pcr_map   Miquel Raynal
• [U-Boot] [PATCH 2/2] tpm: sandbox: fix wrong assignment with a simplification   Miquel Raynal
• [U-Boot] [PATCH 1/4 v2] spi: spi-mem: Use 2 SPI messages instead of a single full-duplex one   Miquel Raynal
• [U-Boot] [PATCH v6 00/27] SPI-NAND support   Miquel Raynal
• [U-Boot] [PATCH 1/4 v2] spi: spi-mem: Use 2 SPI messages instead of a single full-duplex one   Miquel Raynal
• [U-Boot] [PATCH v6 00/27] SPI-NAND support   Miquel Raynal
• [U-Boot] [PATCH 1/4 v2] spi: spi-mem: Use 2 SPI messages instead of a single full-duplex one   Miquel Raynal
• [U-Boot] [PATCH 1/4 v2] spi: spi-mem: Use 2 SPI messages instead of a single full-duplex one   Miquel Raynal
• [U-Boot] [PATCH v6 00/31] SPI-NAND support   Miquel Raynal
• [U-Boot] [PATCH v6 01/31] mtd: Fallback to ->_read/write_oob() when ->_read/write() is missing   Miquel Raynal
• [U-Boot] [PATCH v6 02/31] mtd: Uninline mtd_write_oob and move it to mtdcore.c   Miquel Raynal
• [U-Boot] [PATCH v6 03/31] mtd: Add sanity checks in mtd_write/read_oob()   Miquel Raynal
• [U-Boot] [PATCH v6 04/31] mtd: Fallback to ->_read/write() when ->_read/write_oob() is missing   Miquel Raynal
• [U-Boot] [PATCH v6 05/31] mtd: add get/set of_node/flash_node helpers   Miquel Raynal
• [U-Boot] [PATCH v6 06/31] mtd: fix build issue with includes   Miquel Raynal
• [U-Boot] [PATCH v6 07/31] mtd: move definitions to enlarge their range   Miquel Raynal
• [U-Boot] [PATCH v6 08/31] mtd: move all flash categories inside MTD submenu   Miquel Raynal
• [U-Boot] [PATCH v6 09/31] mtd: move NAND files into a raw/ subdirectory   Miquel Raynal
• [U-Boot] [PATCH v6 10/31] mtd: rename nand into rawnand in Kconfig prompt   Miquel Raynal
• [U-Boot] [PATCH v6 11/31] mtd: nand: Add core infrastructure to deal with NAND devices   Miquel Raynal
• [U-Boot] [PATCH v6 12/31] mtd: nand: Pass mode information to nand_page_io_req   Miquel Raynal
• [U-Boot] [PATCH v6 13/31] spi: Extend the core to ease integration of SPI memory controllers   Miquel Raynal
• [U-Boot] [PATCH v6 14/31] mtd: nand: Add core infrastructure to support SPI NANDs   Miquel Raynal
• [U-Boot] [PATCH v6 15/31] mtd: spinand: Add initial support for Micron MT29F2G01ABAGD   Miquel Raynal
• [U-Boot] [PATCH v6 16/31] mtd: spinand: Add initial support for Winbond W25M02GV   Miquel Raynal
• [U-Boot] [PATCH v6 17/31] mtd: spinand: Add initial support for the MX35LF1GE4AB chip   Miquel Raynal
• [U-Boot] [PATCH v6 18/31] mtd: spinand: Add initial support for the MX35LF2GE4AB chip   Miquel Raynal
• [U-Boot] [PATCH v6 19/31] dt-bindings: Add bindings for SPI NAND devices   Miquel Raynal
• [U-Boot] [PATCH v6 20/31] mtd: declare MTD_PARTITIONS symbol in Kconfig   Miquel Raynal
• [U-Boot] [PATCH v6 21/31] mtd: mtdpart: balance debug messages   Miquel Raynal
• [U-Boot] [PATCH v6 22/31] cmd: ubi: delete useless and misleading definitions   Miquel Raynal
• [U-Boot] [PATCH v6 23/31] cmd: mtdparts: add fallthrough in switch statement   Miquel Raynal
• [U-Boot] [PATCH v6 24/31] cmd: mtdparts: accept spi-nand devices   Miquel Raynal
• [U-Boot] [PATCH v6 25/31] cmd: mtdparts: add a generic 'mtdparts' parser   Miquel Raynal
• [U-Boot] [PATCH v6 26/31] mtd: uclass: add probe function   Miquel Raynal
• [U-Boot] [PATCH v6 27/31] mtd: move mtdparts_init() declaration   Miquel Raynal
• [U-Boot] [PATCH v6 28/31] mtd: mtdpart: implement proper partition handling   Miquel Raynal
• [U-Boot] [PATCH v6 29/31] cmd: mtd: add 'mtd' command   Miquel Raynal
• [U-Boot] [PATCH v6 30/31] cmd: mtdparts: try to probe the MTD devices as a fallback   Miquel Raynal
• [U-Boot] [PATCH v6 31/31] cmd: ubi: clean the partition handling   Miquel Raynal
• [U-Boot] [PATCH v6 00/31] SPI-NAND support   Miquel Raynal
• [U-Boot] [PATCH] mtd: nand: spi: Add Gigadevice SPI NAND support   Miquel Raynal
• [U-Boot] [PATCH v6 27/31] mtd: move mtdparts_init() declaration   Miquel Raynal
• [U-Boot] [PATCH v6 29/31] cmd: mtd: add 'mtd' command   Miquel Raynal
• [U-Boot] [PATCH v6 00/31] SPI-NAND support   Miquel Raynal
• [U-Boot] [PATCH v7 00/13] Cleaner MTD devices management   Miquel Raynal
• [U-Boot] [PATCH v7 01/13] lib: strto: parse all lowercase metric prefixes in ustrtoul[l]   Miquel Raynal
• [U-Boot] [PATCH v7 02/13] lib: strto: fix metric suffix parsing in strtoul[l]   Miquel Raynal
• [U-Boot] [PATCH v7 03/13] mtd: Kconfig: remove MTD_PARTITIONS duplicated symbol   Miquel Raynal
• [U-Boot] [PATCH v7 04/13] cmd: mtdparts: accept spi-nand devices   Miquel Raynal
• [U-Boot] [PATCH v7 05/13] cmd: mtdparts: remove mandatory 'mtdparts=' prefix   Miquel Raynal
• [U-Boot] [PATCH v7 06/13] mtd: uclass: add probe function   Miquel Raynal
• [U-Boot] [PATCH v7 07/13] mtd: uclass: add a generic 'mtdparts' parser   Miquel Raynal
• [U-Boot] [PATCH v7 08/13] mtd: uclass: search for an equivalent MTD name with the mtdids   Miquel Raynal
• [U-Boot] [PATCH v7 09/13] mtd: mtdpart: implement proper partition handling   Miquel Raynal
• [U-Boot] [PATCH v7 10/13] cmd: mtd: add 'mtd' command   Miquel Raynal
• [U-Boot] [PATCH v7 11/13] cmd: mtdparts: try to probe the MTD devices as a fallback   Miquel Raynal
• [U-Boot] [PATCH v7 12/13] cmd: ubi: clean the partition handling   Miquel Raynal
• [U-Boot] [PATCH v7 13/13] cmd: mtdparts: describe as legacy   Miquel Raynal
• [U-Boot] [PATCH 1/3] pinctrl: bcm6838: add pinctrl support   Philippe Reynes
• [U-Boot] [PATCH 2/3] dt: bcm6838: add pinctrl   Philippe Reynes
• [U-Boot] [PATCH 3/3] bcm968380gerg: enable pinctrl   Philippe Reynes
• [U-Boot] [PATCH V2 1/3] pinctrl: bcm6838: add pinctrl support   Philippe Reynes
• [U-Boot] [PATCH V2 2/3] dt: bcm6838: add pinctrl   Philippe Reynes
• [U-Boot] [PATCH V2 3/3] bcm968380gerg: enable pinctrl   Philippe Reynes
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] [PATCH] openrd: Once again shrink binary size   Tom Rini
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] Please pull u-boot-mpc85xx master   Tom Rini
• [U-Boot] Please pull ARC changes or 2018.09-rc2   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PATCH] ARM: tegra: align carveout size   Tom Rini
• [U-Boot] [PATCH] ARM: tegra: align carveout size   Tom Rini
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] [PATCH] travis: give every job a name   Tom Rini
• [U-Boot] [PATCH] arm: armv7-a: Enable mtune when CONFIG_CPU_V7A   Tom Rini
• [U-Boot] Questions about loading U-Boot from ATF   Tom Rini
• [U-Boot] armv5 and OMAP3 Question   Tom Rini
• [U-Boot] [PATCH 3/9] common: include <inttypes.h> always   Tom Rini
• [U-Boot] Is there a omap_gpmc.c maintainer?   Tom Rini
• [U-Boot] armv5 and OMAP3 Question   Tom Rini
• [U-Boot] Please pull u-boot-dm (take 2)   Tom Rini
• [U-Boot] armv5 and OMAP3 Question   Tom Rini
• [U-Boot] armv5 and OMAP3 Question   Tom Rini
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] [U-Boot, u-boot, 2/2] clk: clk_meson: Add mux and div support for reparent and rate setting   Tom Rini
• [U-Boot] [U-Boot, v4, 9/9] ARM: dts: stm32: remove cd-inverted for stm32f746-disco   Tom Rini
• [U-Boot] [U-Boot,v2,6/6] ARM: dts: stm32mp157: Add ADC DT node   Tom Rini
• [U-Boot] [U-Boot,v2] Add Beaglebone Enhanced support   Tom Rini
• [U-Boot] kconfig: Replace spaces with tabs   Tom Rini
• [U-Boot] [U-Boot,v2,1/6] clk: add clk_valid()   Tom Rini
• [U-Boot] [U-Boot, v2, 2/6] dm: adc: uclass: get reference regulator once   Tom Rini
• [U-Boot] [U-Boot, v2, 3/6] dt-bindings: Document STM32 ADC DT bindings   Tom Rini
• [U-Boot] [U-Boot,v2,4/6] adc: Add driver for STM32 ADC   Tom Rini
• [U-Boot] [U-Boot,v2,5/6] configs: stm32mp15: enable ADC   Tom Rini
• [U-Boot] [U-Boot, V2] ti_omap3_common: Add CONFIG_SYS_NS16550_COMx entries   Tom Rini
• [U-Boot] [U-Boot,1/2] armv8: Reduce exception handling code   Tom Rini
• [U-Boot] [U-Boot, 2/2] armv8: make SPL exception vectors optional   Tom Rini
• [U-Boot] bootcount: Fix misaligned cache operation   Tom Rini
• [U-Boot] docproc: Remove   Tom Rini
• [U-Boot] [U-Boot, v4, 1/9] configs: stm32f429-evaluation: Enable CONFIG_BLK   Tom Rini
• [U-Boot] [U-Boot, v4, 2/9] configs: stm32f746-disco: Enable CONFIG_BLK   Tom Rini
• [U-Boot] [U-Boot, v4, 3/9] configs: stm32f469-disco: Enable CONFIG_BLK   Tom Rini
• [U-Boot] [U-Boot, v4, 4/9] mmc: arm_pl180_mmci: Update to support CONFIG_BLK   Tom Rini
• [U-Boot] [U-Boot, v4, 5/9] mmc: arm_pl180_mmci: Add missing clk_free   Tom Rini
• [U-Boot] [U-Boot, v4, 6/9] mmc: arm_pl180_mmci: Remove cd_inverted host's struct field   Tom Rini
• [U-Boot] [U-Boot, v4, 7/9] ARM: dts: stm32: remove cd-inverted for stm32429i-eval   Tom Rini
• [U-Boot] mailmap: Update mail address (lukma)   Tom Rini
• [U-Boot] clk: clk_set_default: accept no-op skip fields   Tom Rini
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [PATCH] ARM: dts: stm32f4: Fix DT dtc warnings   Tom Rini
• [U-Boot] [PATCH] common: Increase LOGLEVEL back to 6   Tom Rini
• [U-Boot] [PATCHv2 2/2] Convert all of CONFIG_CONS_INDEX to Kconfig   Tom Rini
• [U-Boot] [PATCH] common: Increase LOGLEVEL back to 6   Tom Rini
• [U-Boot] [PATCH 01/11] imx: Add bootcmd to load and run UEFI from mmc   Tom Rini
• [U-Boot] [PATCH] common: Increase LOGLEVEL back to 6   Tom Rini
• [U-Boot] [PATCH] common: Increase LOGLEVEL back to 6   Tom Rini
• [U-Boot] Pull request: u-boot-staging   Tom Rini
• [U-Boot] Please pull u-boot-video/master   Tom Rini
• [U-Boot] [GIT PULL] Xilinx fixes for v2018.09-rc2   Tom Rini
• [U-Boot] [GIT PULL] Xilinx fixes for v2018.09-rc2   Tom Rini
• [U-Boot] [PULL] efi patch queue 2018-07-25   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] [GIT PULL] Xilinx fixes for v2018.09-rc2   Tom Rini
• [U-Boot] [PATCH v3 0/7] Fixes/Addition to use the USB Ethernet gadget with the DWC3 gadget controller   Tom Rini
• [U-Boot] please pull u-boot-samsung master   Tom Rini
• [U-Boot] [PATCH] bcm968380gerg: Add MAINTAINERS file   Tom Rini
• [U-Boot] [GIT PULL] u-boot-mips/master   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PATCH] bcm968380gerg: Add MAINTAINERS file   Tom Rini
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Tom Rini
• [U-Boot] [PATCH] serial: omap: Introduce DM specific omap serial   Tom Rini
• [U-Boot] [PATCH v1] arm: at91: wdt: Convert watchdog driver to dm   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PATCH 0/9] Support 4GB of memory on 32bit systems   Tom Rini
• [U-Boot] [U-Boot,v4,1/5] stm32mp1: add gpio led support   Tom Rini
• [U-Boot] [U-Boot, v4, 2/5] Revert "dm: led: auto probe() LEDs with "default-state""   Tom Rini
• [U-Boot] [U-Boot, v4, 3/5] dm: led: move default state support in led uclass   Tom Rini
• [U-Boot] [U-Boot, v4, 4/5] stm32mp1: use new function led default state   Tom Rini
• [U-Boot] [U-Boot, v4, 5/5] sandbox: led: use new function to configure default state   Tom Rini
• [U-Boot] sata: fix sata_Probe return value check   Tom Rini
• [U-Boot] omap3_logic: Fix CONS_INDEX   Tom Rini
• [U-Boot] [U-Boot,1/1] drivers: serial: document on_baudrate()   Tom Rini
• [U-Boot] [U-Boot,1/1] README: U_BOOT_ENV_CALLBACK functions   Tom Rini
• [U-Boot] [U-Boot, 1/1] doc: add structure to Sphinx generated docs   Tom Rini
• [U-Boot] [U-Boot, 1/1] doc: README.iscsi: make compatible with restructured text   Tom Rini
• [U-Boot] configs: omap: Remove dead config CONFIG_SYS_NAND_ADDR   Tom Rini
• [U-Boot] configs: omap3_logic: Disable NAND ID during SPL   Tom Rini
• [U-Boot] [U-Boot, 1/2] doc: FIT image: clarify usage of "compression" property   Tom Rini
• [U-Boot] [U-Boot,1/2] smbios: fix checkstyle error   Tom Rini
• [U-Boot] [U-Boot,2/2] smbios: fix checkstyle warning   Tom Rini
• [U-Boot] [U-Boot, v3, 1/2] env: Don't show "Failed" error message   Tom Rini
• [U-Boot] [U-Boot, v3, 2/2] disk: part: Don't show redundant error message   Tom Rini
• [U-Boot] travis: give every job a name   Tom Rini
• [U-Boot] [U-Boot, v2, 1/2] snapdragon: Add DRAM detection & FDT fixup   Tom Rini
• [U-Boot] [U-Boot,v2,2/2] db410c: Fixup DRAM   Tom Rini
• [U-Boot] [U-Boot, 1/1] elf: Add support for PPC64 ELF V1 ABI in bootelf   Tom Rini
• [U-Boot] Please pull u-boot-video/master   Tom Rini
• [U-Boot] Pull request: u-boot-staging   Tom Rini
• [U-Boot] [PATCH v3 2/8] arm: socfpga: fix device trees to work with DM serial   Tom Rini
• [U-Boot] [PATCH v3 2/8] arm: socfpga: fix device trees to work with DM serial   Tom Rini
• [U-Boot] [PATCH v3 2/8] arm: socfpga: fix device trees to work with DM serial   Tom Rini
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Tom Rini
• [U-Boot] [PATCH v3 2/8] arm: socfpga: fix device trees to work with DM serial   Tom Rini
• [U-Boot] [PATCH] fdt_support: Use VLA instead of MEMORY_BANKS_MAX   Tom Rini
• [U-Boot] [PATCH] fdt_support: Use VLA instead of MEMORY_BANKS_MAX   Tom Rini
• [U-Boot] [PATCH] fdt_support: Use VLA instead of MEMORY_BANKS_MAX   Tom Rini
• [U-Boot] [PATCH] cmd: led.c: fix coding style   Tom Rini
• [U-Boot] [PATCH] fdt_support: Use VLA instead of MEMORY_BANKS_MAX   Tom Rini
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] [U-Boot,v3,1/1] avb2.0: add get_size_of_partition()   Tom Rini
• [U-Boot] [U-Boot,1/1] fs: fix typo 'dumm'   Tom Rini
• [U-Boot] [U-Boot,v2] rsa: Fix LibreSSL before v2.7.0   Tom Rini
• [U-Boot] arm: bcm7445: Fix parallel make race condition   Tom Rini
• [U-Boot] arm: bcm7445: Move config defines to bcm7445.h   Tom Rini
• [U-Boot] clk: at91: utmi: add timeout for utmi lock   Tom Rini
• [U-Boot] [U-Boot, v1, 01/11] board: stm32: use bi_dram[0].start instead of hardcoded value   Tom Rini
• [U-Boot] [U-Boot, v1, 02/11] configs: stm32fxxx: Remove CONFIG_SYS_CLK_FREQ   Tom Rini
• [U-Boot] [U-Boot, v1, 03/11] configs: stm32f429-disco: Remove CONFIG_SYS_RAM_CS   Tom Rini
• [U-Boot] [U-Boot, v1, 04/11] configs: stm32f4xx: Enable ICACHE and DCACHE   Tom Rini
• [U-Boot] [U-Boot, v1, 05/11] configs: stm32f746-disco: Migrate CONFIG_CMD_CACHE to defconfig   Tom Rini
• [U-Boot] [U-Boot, v1, 06/11] configs: stm32h7xx: Migrate CONFIG_CMD_CACHE to defconfig   Tom Rini
• [U-Boot] [U-Boot, v1, 07/11] configs: stm32f4xx: Remove CONFIG_SYS_RAM_FREQ_DIV   Tom Rini
• [U-Boot] [U-Boot, v1, 08/11] configs: stm32h743-evaluation: Add DISTRO_DEFAULT support   Tom Rini
• [U-Boot] [U-Boot, v1, 09/11] configs: stm32h743-discovery: Add DISTRO_DEFAULT support   Tom Rini
• [U-Boot] [U-Boot, v1, 10/11] configs: stm32f469-discovery: Add DISTRO_DEFAULT support   Tom Rini
• [U-Boot] [U-Boot, v1, 11/11] configs: stm32f429-evaluation: Add DISTRO_DEFAULT support   Tom Rini
• [U-Boot] [U-Boot,v2] stm32f7: board: Fix memory init   Tom Rini
• [U-Boot] [U-Boot, v1, 1/3] snapdragon: added msm_board_serial() func   Tom Rini
• [U-Boot] [U-Boot, v1, 2/3] snapdragon: added MAC generation functions   Tom Rini
• [U-Boot] [U-Boot, v1, 3/3] db410: alter WLAN/BT MAC address fixup   Tom Rini
• [U-Boot] [U-Boot, v1, 3/3] db410: alter WLAN/BT MAC address fixup   Tom Rini
• [U-Boot] db410c: add FIT support   Tom Rini
• [U-Boot] MAINTAINERS: Add more sources to Arch Snapdragon   Tom Rini
• [U-Boot] [U-Boot,1/2] tpm: sandbox: fix wrong check on pcr_map   Tom Rini
• [U-Boot] [U-Boot, 2/2] tpm: sandbox: fix wrong assignment with a simplification   Tom Rini
• [U-Boot] ARM: omap3: evm: Enable CONFIG_BLK and misc. cleanup   Tom Rini
• [U-Boot] [U-Boot, 1/2] ARM: dts: stm32: remove cd-inverted for stm32f769-disco   Tom Rini
• [U-Boot] [U-Boot, 2/2] ARM: dts: stm32: remove cd-inverted for stm32f746-disco   Tom Rini
• [U-Boot] ARM: dts: stm32mp157: Add ADC DT node   Tom Rini
• [U-Boot] ARM: dts: stm32f4: Fix DT dtc warnings   Tom Rini
• [U-Boot] MAINTAINERS: Update STM32MP fragments   Tom Rini
• [U-Boot] [ANN] U-Boot v2018.09-rc2 released   Tom Rini
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Tom Rini
• [U-Boot] [ANN] U-Boot v2018.09-rc2 released   Tom Rini
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Tom Rini
• [U-Boot] [PATCH 01/10] dm: fdt: scan for devices under /firmware too   Tom Rini
• [U-Boot] [PATCH] [RFC] blk: Increase cache element size   Tom Rini
• [U-Boot] [PATCH 01/10] dm: fdt: scan for devices under /firmware too   Tom Rini
• [U-Boot] [PATCH 01/10] dm: fdt: scan for devices under /firmware too   Tom Rini
• [U-Boot] [PATCH] [RFC] blk: Increase cache element size   Tom Rini
• [U-Boot] [PATCH] [RFC] blk: Increase cache element size   Tom Rini
• [U-Boot] [PATCH v4 1/2] common: Add support for Android DT image   Tom Rini
• [U-Boot] [PATCH v4 2/2] cmd: Add dtimg command   Tom Rini
• [U-Boot] [PATCH 1/4] arm: omap4+: Move SCLK to include/configs   Tom Rini
• [U-Boot] [PATCH] CONFIG_SYS_GENERIC_BOARD: Finish migration   Tom Rini
• [U-Boot] [PATCH] configs: Migrate CONFIG_NR_DRAM_BANKS   Tom Rini
• [U-Boot] [PATCH] CONFIG_SYS_GENERIC_BOARD: Finish migration   Tom Rini
• [U-Boot] [PATCH] configs: Migrate CONFIG_NR_DRAM_BANKS   Tom Rini
• [U-Boot] fdt_support: Use CONFIG_NR_DRAM_BANKS if necessary   Tom Rini
• [U-Boot] Kconfig: Migrate CONFIG_NR_DRAM_BANKS   Tom Rini
• [U-Boot] [PATCH] [RFC] blk: Increase cache element size   Tom Rini
• [U-Boot] [PATCH 1/4] arm: omap4+: Move SCLK to include/configs   Tom Rini
• [U-Boot] [PATCH] configs: Migrate CONFIG_NR_DRAM_BANKS   Tom Rini
• [U-Boot] [PATCH] configs: Migrate CONFIG_NR_DRAM_BANKS   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] [U-Boot,v2] kconfig: fix typo 'parition'   Tom Rini
• [U-Boot] dts: Fix typo in OF_LIVE Kconfig help   Tom Rini
• [U-Boot] Convert CONFIG_MII et al to Kconfig   Tom Rini
• [U-Boot] [U-Boot, v3, 1/2] Add BOOTCOUNT_BOOTLIMIT to set reboot limit   Tom Rini
• [U-Boot] [U-Boot,v3,2/2] Migrate bootlimit to Kconfig   Tom Rini
• [U-Boot] Convert CONFIG_MISC_INIT_R to Kconfig   Tom Rini
• [U-Boot] Convert CONFIG_VIDEO_OMAP3 to Kconfig   Tom Rini
• [U-Boot] Convert CONFIG_TWL4030_LED et al to Kconfig   Tom Rini
• [U-Boot] Removed unused references to CONFIG_SERIALx   Tom Rini
• [U-Boot] Convert CONFIG_SYS_I2C_DAVINCI to Kconfig   Tom Rini
• [U-Boot] [U-Boot, 2/2] FIT image: use compression = "none" for ramdisks   Tom Rini
• [U-Boot] fdt_support: Use CONFIG_NR_DRAM_BANKS if necessary   Tom Rini
• [U-Boot] [PATCH] Convert CONFIG_BOARD_LATE_INIT to Kconfig   Tom Rini
• [U-Boot] Disabling CONFIG_DM_I2C_COMPAT in twl4030 PMIC   Tom Rini
• [U-Boot] env: Merge Rockchip, Sunxi, Zynq and ZynqMP   Tom Rini
• [U-Boot] Disabling CONFIG_DM_I2C_COMPAT in twl4030 PMIC   Tom Rini
• [U-Boot] [PATCH 0/8] Import Undefined Behavior Sanitizer   Tom Rini
• [U-Boot] [PATCH 1/8] UBSAN: run-time undefined behavior sanity checker   Tom Rini
• [U-Boot] [PATCH 3/8] armv8: mmu: Fix "left shift in type int" undefined behavior   Tom Rini
• [U-Boot] [PATCH 8/8] hashtable: Fix zero-sized array undefined behavior   Tom Rini
• [U-Boot] [U-Boot,v2] Convert CONFIG_BOARD_LATE_INIT to Kconfig   Tom Rini
• [U-Boot] [U-Boot, 1/4] env: fat: drop not needed #ifdef CMD_SAVEENV   Tom Rini
• [U-Boot] arm: omap: configs: various: Remove references to OMAP34XX_UARTx   Tom Rini
• [U-Boot] env: Merge Rockchip, Sunxi, Zynq and ZynqMP   Tom Rini
• [U-Boot] [U-Boot,v2] Convert CONFIG_BOARD_LATE_INIT to Kconfig   Tom Rini
• [U-Boot] [PATCH] ARM: display5: config: Replace hardcoded size of kernel (0x2000) with variable (fitImg_fw_sz)   Tom Rini
• [U-Boot] [U-Boot, V2] drivers: regulator: fixed: add u-boot, off-on-delay-us   Tom Rini
• [U-Boot] configs: da850evm: Remove DM_I2C_COMPAT   Tom Rini
• [U-Boot] ARM: da850evm: Enable USE_TINY_PRINTF   Tom Rini
• [U-Boot] ARM: da850evm: Enable SPL_SYS_MALLOC_SIMPLE   Tom Rini
• [U-Boot] ARM: da8xxevm: README: Add NOR booting instructions   Tom Rini
• [U-Boot] spl: fix debug print in spl_common_init()   Tom Rini
• [U-Boot] fs/fat: debug-print file read position during file_fat_read_at()   Tom Rini
• [U-Boot] [U-Boot, v4, 1/2] common: Add support for Android DT image   Tom Rini
• [U-Boot] [U-Boot,v4,2/2] cmd: Add dtimg command   Tom Rini
• [U-Boot] doc: FIT image: fix typo   Tom Rini
• [U-Boot] ARM: display5: config: Replace hardcoded size of kernel (0x2000) with variable (fitImg_fw_sz)   Tom Rini
• [U-Boot] arm: omap: configs: various: Remove references to OMAP34XX_UARTx   Tom Rini
• [U-Boot] [PATCH 1/8] UBSAN: run-time undefined behavior sanity checker   Tom Rini
• [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] [PULL 2018.09] efi patch queue 2018-08-21   Tom Rini
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Tom Rini
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Tom Rini
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Tom Rini
• [U-Boot] [PULL 2018.09] efi patch queue 2018-08-21   Tom Rini
• [U-Boot] Pull request, u-boot-tegra/master   Tom Rini
• [U-Boot] [PATCH] efi_loader: Rename sections to allow for implicit data   Tom Rini
• [U-Boot] [U-Boot, v9, 01/18] Partially revert "efi_loader: Rename sections to allow for implicit data"   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] [PATCH 1/8] arm: K3: Add initial support for TI's K3 generation of SoCs   Tom Rini
• [U-Boot] [PATCH 2/8] arm: K3: Add support for AM654 SoC definition   Tom Rini
• [U-Boot] [PATCH 4/8] arm: K3: am654: Add support for boot device detection   Tom Rini
• [U-Boot] [PATCH 5/8] arm: K3: am654: Unlock control module registers during init   Tom Rini
• [U-Boot] [PATCH 6/8] armv8: K3: am654: Add custom MMU support   Tom Rini
• [U-Boot] [PATCH 7/8] armv8: K3: am654: Introduce FIT generator script   Tom Rini
• [U-Boot] [PATCH 8/8] armv8: K3: am654: Add support for generating build targets   Tom Rini
• [U-Boot] [PATCH 01/25] firmware: Add basic support for TI System Control Interface (TI SCI) protocol   Tom Rini
• [U-Boot] [PATCH 02/25] firmware: ti_sci: Add support for board configuration   Tom Rini
• [U-Boot] [PATCH 03/25] firmware: ti_sci: Add support for device control   Tom Rini
• [U-Boot] [PATCH 04/25] firmware: ti_sci: Add support for clock control   Tom Rini
• [U-Boot] [PATCH 05/25] firmware: ti_sci: Add support for reboot core service   Tom Rini
• [U-Boot] [PATCH 06/25] firmware: ti_sci: Add support for processor control services   Tom Rini
• [U-Boot] [PATCH 07/25] dm: firmware: Automatically bind child devices   Tom Rini
• [U-Boot] [PATCH 08/25] dm: reset: Update uclass to allow querying reset status   Tom Rini
• [U-Boot] [PATCH 09/25] reset: Extend reset control with an optional data field   Tom Rini
• [U-Boot] [PATCH 10/25] reset: Introduce TI System Control Interface (TI SCI) reset driver   Tom Rini
• [U-Boot] [PATCH 11/25] clk: Allow clock defaults to be set also during re-reloc state   Tom Rini
• [U-Boot] [PATCH 12/25] clk: Extend clock control with an optional data field   Tom Rini
• [U-Boot] [PATCH 13/25] clk: Introduce TI System Control Interface (TI SCI) clock driver   Tom Rini
• [U-Boot] [PATCH 14/25] power domain: Add support for multiple powerdomains per device   Tom Rini
• [U-Boot] [PATCH 15/25] power domain: Introduce TI System Control Interface (TI SCI) power domain driver   Tom Rini
• [U-Boot] [PATCH 16/25] sysreset: Add TI System Control Interface (TI SCI) sysreset driver   Tom Rini
• [U-Boot] [PATCH 17/25] mailbox: Allow attaching private data for mbox_chan   Tom Rini
• [U-Boot] [PATCH 18/25] mailbox: Introduce K3 Secure Proxy Driver   Tom Rini
• [U-Boot] [PATCH 19/25] spl: Allow mailbox drivers to be used within SPL   Tom Rini
• [U-Boot] [PATCH 20/25] remoteproc: Allow for individual remoteproc initialization   Tom Rini
• [U-Boot] [PATCH 21/25] remoteproc: Introduce K3 system controller   Tom Rini
• [U-Boot] [PATCH 22/25] remoteproc: Introduce K3 remoteproc driver   Tom Rini
• [U-Boot] [PATCH 23/25] spl: Allow remoteproc drivers to be used within SPL   Tom Rini
• [U-Boot] [PATCH 24/25] mmc: k3_arasan: Add sdhci driver support for K3 family SoCs   Tom Rini
• [U-Boot] [PATCH 25/25] gpio: do not include <asm/arch/gpio.h> for ARCH_K3   Tom Rini
• [U-Boot] [PATCH 1/3] drivers: net: cpsw: add support to update phy address   Tom Rini
• [U-Boot] [PATCH 2/3] board: ti: am335x: add support to fixup phy address   Tom Rini
• [U-Boot] [PATCH 3/3] configs: am335x_evm: enable OF_BOARD_SETUP   Tom Rini
• [U-Boot] [PATCH 1/6] board: ti: am654: a53: Add initial support for am654   Tom Rini
• [U-Boot] [PATCH 2/6] board: ti: am65x: Add README   Tom Rini
• [U-Boot] [PATCH 3/6] include: am654_evm: Establish initial environment for SD card boot   Tom Rini
• [U-Boot] [PATCH 4/6] arm64: dts: k3: Add Support for AM654 SoC   Tom Rini
• [U-Boot] [PATCH 5/6] arm64: dts: k3: Add u-boot specific nodes   Tom Rini
• [U-Boot] [PATCH 6/6] configs: am65x_evm_a53: Add initial support   Tom Rini
• [U-Boot] Unaligned memory accesses exception   Tom Rini
• [U-Boot] [PATCH 1/8] arm: K3: Add initial support for TI's K3 generation of SoCs   Tom Rini
• [U-Boot] [PATCH 2/8] arm: K3: Add support for AM654 SoC definition   Tom Rini
• [U-Boot] [PATCH 1/8] arm: K3: Add initial support for TI's K3 generation of SoCs   Tom Rini
• [U-Boot] [U-Boot, 1/7] libavb: Handle wrong hashtree_error_mode in avb_append_options()   Tom Rini
• [U-Boot] [U-Boot, 2/7] common: avb_verify: Fix invalid 'for' loop condition   Tom Rini
• [U-Boot] [U-Boot, 3/7] common: kconfig: Mark AVB_VERIFY as dependent on PARTITION_UUIDS   Tom Rini
• [U-Boot] [U-Boot, 4/7] common: avb_verify: Make local data static   Tom Rini
• [U-Boot] [U-Boot,5/7] common: avb_verify: Fix memory leaks   Tom Rini
• [U-Boot] [U-Boot, 6/7] common: avb_verify: Fix never-occurring avb_free(ops_data)   Tom Rini
• [U-Boot] [U-Boot, 7/7] common: avb_verify: Fix division by zero in mmc_byte_io()   Tom Rini
• [U-Boot] [U-Boot, u-boot, 1/3] boards: amlogic: remove ethernet gpio reset code from boards   Tom Rini
• [U-Boot] board: arm: bcmstb: Declare get_ticks in timer.h   Tom Rini
• [U-Boot] [U-Boot, v1] malloc_simple: calloc: don't call memset if malloc failed   Tom Rini
• [U-Boot] dm: test: Fix typo in test-main comment   Tom Rini
• [U-Boot] ARM: display5: Remove "factory procedure" from display5 board config   Tom Rini
• [U-Boot] u-boot: align cache flushes in load_elf_image_shdr to line boundaries   Tom Rini
• [U-Boot] env: ubi: Add missing ENV_NAME   Tom Rini
• [U-Boot] ARM: dts: am33xx: fix SLEWCTRL_FAST pinctrl binding   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] arm: omap: configs: various: Remove references to OMAP34XX_UARTx   Tom Rini
• [U-Boot] arm: omap: configs: various: Remove references to OMAP34XX_UARTx   Tom Rini
• [U-Boot] configs: am57xx: change default board name to beagle_x15   Tom Rini
• [U-Boot] cmd: ubi: change 'default y' for SUNXI to 'imply' in Kconfig   Tom Rini
• [U-Boot] [PATCH v2 1/8] arm: K3: Add initial support for TI's K3 generation of SoCs   Tom Rini
• [U-Boot] [PATCH v3] serial: omap: Introduce DM specific omap serial   Tom Rini
• [U-Boot] [PATCH v2 2/8] arm: K3: Add support for AM654 SoC definition   Tom Rini
• [U-Boot] [PATCH v2 4/8] arm: K3: am654: Add support for boot device detection   Tom Rini
• [U-Boot] [PATCH v2 7/8] armv8: K3: am654: Introduce FIT generator script   Tom Rini
• [U-Boot] [PATCH v2 20/24] remoteproc: Introduce K3 system controller   Tom Rini
• [U-Boot] [PATCH v2 01/13] UBSAN: run-time undefined behavior sanity checker   Tom Rini
• [U-Boot] [PATCH v2 03/13] armv8: mmu: Fix signed shift overflow   Tom Rini
• [U-Boot] [PATCH v2 11/13] hashtable: Fix zero-sized array   Tom Rini
• [U-Boot] [PATCH v2 12/13] input: Fix zero-sized array   Tom Rini
• [U-Boot] [PATCH] TPL/SPL: add separate CONFIG_TPL_FRAMEWORK for TPL   Tom Rini
• [U-Boot] [PATCH] TPL/SPL: add separate CONFIG_TPL_FRAMEWORK for TPL   Tom Rini
• [U-Boot] u-boot release and feature set   Tom Rini
• [U-Boot] [PATCH V4 1/2] mmc: add HS400 support   Tom Rini
• [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] [PULL] Please pull u-boot-imx   Tom Rini
• [U-Boot] u-boot release and feature set   Tom Rini
• [U-Boot] [PATCH] dm: Update README.txt to clarify device tree usage   Tom Rini
• [U-Boot] u-boot release and feature set   Tom Rini
• [U-Boot] u-boot release and feature set   Tom Rini
• [U-Boot] [U-Boot, 1/1] hisilicon: hikey: Update instructions based on latest source   Tom Rini
• [U-Boot] [U-Boot, 1/1] test: fix typo in cmd_ut_category() description   Tom Rini
• [U-Boot] Make kmalloc'ed memory really DMA-safe   Tom Rini
• [U-Boot] spl: Kconfig: Fix typo in 'Upgrade'   Tom Rini
• [U-Boot] [PATCH] configs: sun7i: Fix to use emmc dts for OLinuXino_MICRO-eMMC   Maxime Ripard
• [U-Boot] [PATCH v3 45/58] spi: Add Allwinner A31 SPI driver   Maxime Ripard
• [U-Boot] [PATCH v3 02/58] reset: Add default request ops   Maxime Ripard
• [U-Boot] [PATCH v3 14/58] musb-new: sunxi: Use CLK and RESET support   Maxime Ripard
• [U-Boot] [PATCH v3 18/58] clk: sunxi: Implement AHB bus MMC clocks   Maxime Ripard
• [U-Boot] [PATCH v3 20/58] clk: sunxi: Implement AHB bus MMC resets   Maxime Ripard
• [U-Boot] [PATCH v3 19/58] clk: sunxi: Implement direct MMC clocks   Maxime Ripard
• [U-Boot] [PATCH v3 21/58] reset: Add get reset by name optionally   Maxime Ripard
• [U-Boot] [PATCH v3 24/58] arm64: allwinner: dts: h6: fix Pine H64 MMC bus width   Maxime Ripard
• [U-Boot] [PATCH v3 26/58] dm: mmc: sunxi: Add CLK and RESET support   Maxime Ripard
• [U-Boot] [PATCH v3 27/58] fastboot: sunxi: Update fastboot mmc default device   Maxime Ripard
• [U-Boot] [PATCH v3 29/58] sunxi: Get fat device wrt boot device, 'auto' partition   Maxime Ripard
• [U-Boot] [PATCH] board: sunxi: Remove unused local variables   Maxime Ripard
• [U-Boot] [PATCH] sunxi: disable Pine A64 model detection code on non-A64 SoCs   Maxime Ripard
• [U-Boot] [PATCH v3 24/58] arm64: allwinner: dts: h6: fix Pine H64 MMC bus width   Maxime Ripard
• [U-Boot] [PATCH v3 45/58] spi: Add Allwinner A31 SPI driver   Maxime Ripard
• [U-Boot] [PATCH v3.2 14/58] musb-new: sunxi: Use CLK and RESET support   Maxime Ripard
• [U-Boot] [PATCH v3 27/58] fastboot: sunxi: Update fastboot mmc default device   Maxime Ripard
• [U-Boot] [PATCH v3.2 14/58] musb-new: sunxi: Use CLK and RESET support   Maxime Ripard
• [U-Boot] [PATCH v3.3 14/58] musb-new: sunxi: Use CLK and RESET support   Maxime Ripard
• [U-Boot] [PATCH v4 01/17] clk: Add Allwinner A64 CLK driver   Maxime Ripard
• [U-Boot] [PATCH v4 03/17] reset: Add Allwinner RESET driver   Maxime Ripard
• [U-Boot] [PATCH v4 04/17] clk: sunxi: Add Allwinner H3/H5 CLK driver   Maxime Ripard
• [U-Boot] [PATCH v4 05/17] clk: sunxi: Add Allwinner A10/A20 CLK driver   Maxime Ripard
• [U-Boot] [PATCH v4 06/17] clk: sunxi: Add Allwinner A10s/A13 CLK driver   Maxime Ripard
• [U-Boot] [PATCH v4 07/17] clk: sunxi: Add Allwinner A31 CLK driver   Maxime Ripard
• [U-Boot] [PATCH v4 08/17] clk: sunxi: Add Allwinner A23 CLK driver   Maxime Ripard
• [U-Boot] [PATCH v4 09/17] clk: sunxi: a23: Add CLK support for A33   Maxime Ripard
• [U-Boot] [PATCH v4 10/17] clk: sunxi: Add Allwinner A83T CLK driver   Maxime Ripard
• [U-Boot] [PATCH v4 11/17] clk: sunxi: Add Allwinner R40 CLK driver   Maxime Ripard
• [U-Boot] [PATCH v4 12/17] clk: sunxi: Add Allwinner V3S CLK driver   Maxime Ripard
• [U-Boot] [PATCH v4 14/17] phy: sun4i-usb: Use CLK and RESET support   Maxime Ripard
• [U-Boot] [PATCH v4 17/17] usb: host: Drop [e-o]hci-sunxi drivers   Maxime Ripard
• [U-Boot] [PATCH v4 16/17] sunxi: usb: Switch to Generic host controllers   Maxime Ripard
• [U-Boot] [PATCH v3 19/58] clk: sunxi: Implement direct MMC clocks   Maxime Ripard
• [U-Boot] [PATCH v3 27/58] fastboot: sunxi: Update fastboot mmc default device   Maxime Ripard
• [U-Boot] SUCCESS: Building U-Boot for MIPS64 on Windows7   George Robinson
• [U-Boot] bootelf and 64 bit elf application   George Robinson
• [U-Boot] [PATCH] efi_loader: don't allocate unusable RAM   Peter Robinson
• [U-Boot] U-Boot 2018.07 Still Broken for Allwinner H3 SoCs   Peter Robinson
• [U-Boot] [PATCH] fdt_support: Use VLA instead of MEMORY_BANKS_MAX   Peter Robinson
• [U-Boot] [ANN] U-Boot v2018.09-rc2 released   Peter Robinson
• [U-Boot] [ANN] U-Boot v2018.09-rc2 released   Peter Robinson
• [U-Boot] [ANN] U-Boot v2018.09-rc2 released   Peter Robinson
• [U-Boot] Problem with v2018-09-rc2 to boot EFI on Arndale board   Peter Robinson
• [U-Boot] [PATCH 0/2] Add Rock960 board support   Peter Robinson
• [U-Boot] [PATCH v2 3/3] configs: kirkwood: Move RTC_MV to DM and Kconfig   Stefan Roese
• [U-Boot] [PATCH 4/6] mvebu: select boot device at SoC level   Stefan Roese
• [U-Boot] [PATCH] sf: Add XMC xm25qh64a and xm25qh128a entries   Stefan Roese
• [U-Boot] [PATCH] sf: Add SPI_FLASH_4BYTE_MODE_ONLY option to support 4-byte mode   Stefan Roese
• [U-Boot] [PATCH 1/4] mips: Add basic MediaTek MT7620/88 support   Stefan Roese
• [U-Boot] [PATCH 2/4] mips: Add arch/mips/include/asm/atomic.h   Stefan Roese
• [U-Boot] [PATCH 3/4] mips: Add LinkIt Smart 7688 support   Stefan Roese
• [U-Boot] [PATCH 4/4] mips: Add Gardena Smart-Gateway board support   Stefan Roese
• [U-Boot] [PATCH 1/4] spi: spi-mem: Add optional half-duplex SPI transfer mode   Stefan Roese
• [U-Boot] [PATCH 2/4] mtd: nand: Don't abort erase operation when a bad block is detected   Stefan Roese
• [U-Boot] [PATCH 3/4] cmd: mtd: Don't use with negative return codes for shell commands   Stefan Roese
• [U-Boot] [PATCH 4/4] cmd: mtd: Add info text to mtd erase subcommand   Stefan Roese
• [U-Boot] [PATCH] common: Increase LOGLEVEL back to 6   Stefan Roese
• [U-Boot] [PATCH] sf: Add SPI_FLASH_4BYTE_MODE_ONLY option to support 4-byte mode   Stefan Roese
• [U-Boot] [PATCH] sf: Add SPI_FLASH_4BYTE_MODE_ONLY option to support 4-byte mode   Stefan Roese
• [U-Boot] [PATCH] sf: Add SPI_FLASH_4BYTE_MODE_ONLY option to support 4-byte mode   Stefan Roese
• [U-Boot] [PATCH v6 00/27] SPI-NAND support   Stefan Roese
• [U-Boot] [PATCH v6 00/27] SPI-NAND support   Stefan Roese
• [U-Boot] [PATCH 1/4] spi: spi-mem: Add optional half-duplex SPI transfer mode   Stefan Roese
• [U-Boot] [PATCH 3/4] cmd: mtd: Don't use with negative return codes for shell commands   Stefan Roese
• [U-Boot] [PATCH 4/4] cmd: mtd: Add info text to mtd erase subcommand   Stefan Roese
• [U-Boot] [PATCH 2/4] mtd: nand: Don't abort erase operation when a bad block is detected   Stefan Roese
• [U-Boot] [PATCH] spi: Add SPI driver for MT76xx SoCs   Stefan Roese
• [U-Boot] [PATCH] spi: spi-mem: Use 2 SPI messages instead of a single full-duplex one   Stefan Roese
• [U-Boot] [PATCH] common: Increase LOGLEVEL back to 6   Stefan Roese
• [U-Boot] [PATCH 1/4 v2] spi: spi-mem: Use 2 SPI messages instead of a single full-duplex one   Stefan Roese
• [U-Boot] [PATCH 2/4 v2] cmd: mtd: Don't abort erase operation when a bad block is detected   Stefan Roese
• [U-Boot] [PATCH 3/4 v2] cmd: mtd: Don't use with negative return codes for shell commands   Stefan Roese
• [U-Boot] [PATCH 4/4 v2] cmd: mtd: Add info text to mtd erase subcommand   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] [PATCH 4/4 v2] cmd: mtd: Add info text to mtd erase subcommand   Stefan Roese
• [U-Boot] [PATCH 1/4 v2] spi: spi-mem: Use 2 SPI messages instead of a single full-duplex one   Stefan Roese
• [U-Boot] [PATCH 1/4 v2] spi: spi-mem: Use 2 SPI messages instead of a single full-duplex one   Stefan Roese
• [U-Boot] [PATCH 1/4 v3] spi: spi-mem: Use 2 SPI messages instead of a single full-duplex one   Stefan Roese
• [U-Boot] [PATCH 2/4 v3] cmd: mtd: Don't abort erase operation when a bad block is detected   Stefan Roese
• [U-Boot] [PATCH 3/4 v3] cmd: mtd: Don't use with negative return codes for shell commands   Stefan Roese
• [U-Boot] [PATCH 4/4 v3] cmd: mtd: Add info text to mtd erase subcommand   Stefan Roese
• [U-Boot] [PATCH] fs: ubifs: Add missing newlines in super.c   Stefan Roese
• [U-Boot] [PATCH 1/4 v2] spi: spi-mem: Use 2 SPI messages instead of a single full-duplex one   Stefan Roese
• [U-Boot] [PATCH 2/4] mips: Add arch/mips/include/asm/atomic.h   Stefan Roese
• [U-Boot] [PATCH 1/4] mips: Add basic MediaTek MT7620/88 support   Stefan Roese
• [U-Boot] [PATCH 1/4] mips: Add basic MediaTek MT7620/88 support   Stefan Roese
• [U-Boot] [PATCH 1/4 v2] spi: spi-mem: Use 2 SPI messages instead of a single full-duplex one   Stefan Roese
• [U-Boot] [PATCH] spi: Add SPI driver for MT76xx SoCs   Stefan Roese
• [U-Boot] [PATCH v2] spi: Add SPI driver for MT76xx SoCs   Stefan Roese
• [U-Boot] [PATCH 1/5 v2] mips: Add basic MediaTek MT7620/88 support   Stefan Roese
• [U-Boot] [PATCH 2/5 v2] mips: Add arch/mips/include/asm/atomic.h   Stefan Roese
• [U-Boot] [PATCH 3/5 v2] mips: Add LinkIt Smart 7688 support   Stefan Roese
• [U-Boot] [PATCH 4/5 v2] mips: Add Gardena Smart-Gateway board support   Stefan Roese
• [U-Boot] [PATCH 5/5 v2] mips: mt76xx: Add sysreset support   Stefan Roese
• [U-Boot] [PATCH 1/4] mips: Add basic MediaTek MT7620/88 support   Stefan Roese
• [U-Boot] CONFIG_MIPS_BOOT_CMDLINE_LEGACY usage ?   Stefan Roese
• [U-Boot] [PATCH v2] spi: Add SPI driver for MT76xx SoCs   Stefan Roese
• [U-Boot] [PATCH v2] spi: Add SPI driver for MT76xx SoCs   Stefan Roese
• [U-Boot] CONFIG_MIPS_BOOT_CMDLINE_LEGACY usage ?   Stefan Roese
• [U-Boot] CONFIG_MIPS_BOOT_CMDLINE_LEGACY usage ?   Stefan Roese
• [U-Boot] [PATCH 3/5 v2] mips: Add LinkIt Smart 7688 support   Stefan Roese
• [U-Boot] [PATCH 4/5 v2] mips: Add Gardena Smart-Gateway board support   Stefan Roese
• [U-Boot] [PATCH v3] spi: Add SPI driver for MT76xx SoCs   Stefan Roese
• [U-Boot] [PATCH v4] spi: Add SPI driver for MT76xx SoCs   Stefan Roese
• [U-Boot] [PATCH v4] spi: Add SPI driver for MT76xx SoCs   Stefan Roese
• [U-Boot] [PATCH v5] spi: Add SPI driver for MT76xx SoCs   Stefan Roese
• [U-Boot] [PATCH 1/6 v3] mips: Add basic MediaTek MT7620/88 support   Stefan Roese
• [U-Boot] [PATCH 2/6 v3] mips: Add arch/mips/include/asm/atomic.h   Stefan Roese
• [U-Boot] [PATCH 3/6 v3] mips: Add LinkIt Smart 7688 support   Stefan Roese
• [U-Boot] [PATCH 4/6 v3] mips: Add Gardena Smart-Gateway board support   Stefan Roese
• [U-Boot] [PATCH 5/6 v3] mips: mt76xx: Add sysreset support   Stefan Roese
• [U-Boot] [PATCH 6/6 v3] mips: mt7628a.dtsi: Add SPI clock-frequency property   Stefan Roese
• [U-Boot] [PATCH] mtd: nand: spi: Add Gigadevice SPI NAND support   Stefan Roese
• [U-Boot] [PATCH] mtd: nand: spi: Add Gigadevice SPI NAND support   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 00/12] Updates for Turris Mox   Stefan Roese
• [U-Boot] [PATCH v2 1/3] efi: Fix truncation of constant value   Eugeniu Rosca
• [U-Boot] [PATCH v3 0/7] Fixes/Addition to use the USB Ethernet gadget with the DWC3 gadget controller   Eugeniu Rosca
• [U-Boot] [PATCH v3 0/7] Fixes/Addition to use the USB Ethernet gadget with the DWC3 gadget controller   Eugeniu Rosca
• [U-Boot] [PATCH v3 0/7] Fixes/Addition to use the USB Ethernet gadget with the DWC3 gadget controller   Eugeniu Rosca
• [U-Boot] [PATCH v3 0/7] Fixes/Addition to use the USB Ethernet gadget with the DWC3 gadget controller   Eugeniu Rosca
• [U-Boot] [PATCH v3 0/7] Fixes/Addition to use the USB Ethernet gadget with the DWC3 gadget controller   Eugeniu Rosca
• [U-Boot] [PATCH v2 1/3] efi: Fix truncation of constant value   Eugeniu Rosca
• [U-Boot] [PATCH 1/7] libavb: Handle wrong hashtree_error_mode in avb_append_options()   Eugeniu Rosca
• [U-Boot] [PATCH 2/7] common: avb_verify: Fix invalid 'for' loop condition   Eugeniu Rosca
• [U-Boot] [PATCH 3/7] common: kconfig: Mark AVB_VERIFY as dependent on PARTITION_UUIDS   Eugeniu Rosca
• [U-Boot] [PATCH 4/7] common: avb_verify: Make local data static   Eugeniu Rosca
• [U-Boot] [PATCH 5/7] common: avb_verify: Fix memory leaks   Eugeniu Rosca
• [U-Boot] [PATCH 6/7] common: avb_verify: Fix never-occurring avb_free(ops_data)   Eugeniu Rosca
• [U-Boot] [PATCH 7/7] common: avb_verify: Fix division by zero in mmc_byte_io()   Eugeniu Rosca
• [U-Boot] [PATCH 3/7] common: kconfig: Mark AVB_VERIFY as dependent on PARTITION_UUIDS   Eugeniu Rosca
• [U-Boot] [PATCH 4/7] common: avb_verify: Make local data static   Eugeniu Rosca
• [U-Boot] [PATCH v2 1/3] efi: Fix truncation of constant value   Eugeniu Rosca
• [U-Boot] [PATCH 0/8] Import Undefined Behavior Sanitizer   Eugeniu Rosca
• [U-Boot] [PATCH 1/8] UBSAN: run-time undefined behavior sanity checker   Eugeniu Rosca
• [U-Boot] [PATCH 2/8] mmc: Fix "left shift in type int" undefined behavior   Eugeniu Rosca
• [U-Boot] [PATCH 3/8] armv8: mmu: Fix "left shift in type int" undefined behavior   Eugeniu Rosca
• [U-Boot] [PATCH 4/8] pinctrl: renesas: Fix "left shift in type int" undefined behavior   Eugeniu Rosca
• [U-Boot] [PATCH 5/8] net: phy: Fix "left shift in type int" undefined behavior   Eugeniu Rosca
• [U-Boot] [PATCH 6/8] net: ravb: Fix "left shift in type int" undefined behavior   Eugeniu Rosca
• [U-Boot] [PATCH 7/8] mmc: Fix read-past-end-of-array undefined behavior   Eugeniu Rosca
• [U-Boot] [PATCH 8/8] hashtable: Fix zero-sized array undefined behavior   Eugeniu Rosca
• [U-Boot] [PATCH 1/8] UBSAN: run-time undefined behavior sanity checker   Eugeniu Rosca
• [U-Boot] [PATCH 3/8] armv8: mmu: Fix "left shift in type int" undefined behavior   Eugeniu Rosca
• [U-Boot] [PATCH 4/8] pinctrl: renesas: Fix "left shift in type int" undefined behavior   Eugeniu Rosca
• [U-Boot] [PATCH 1/8] UBSAN: run-time undefined behavior sanity checker   Eugeniu Rosca
• [U-Boot] [PATCH v2 00/13] Import Undefined Behavior Sanitizer   Eugeniu Rosca
• [U-Boot] [PATCH v2 01/13] UBSAN: run-time undefined behavior sanity checker   Eugeniu Rosca
• [U-Boot] [PATCH v2 02/13] mmc: Fix signed shift overflow   Eugeniu Rosca
• [U-Boot] [PATCH v2 03/13] armv8: mmu: Fix signed shift overflow   Eugeniu Rosca
• [U-Boot] [PATCH v2 04/13] pinctrl: renesas: Fix signed shift overflow   Eugeniu Rosca
• [U-Boot] [PATCH v2 05/13] net: phy: Fix signed shift overflow   Eugeniu Rosca
• [U-Boot] [PATCH v2 06/13] net: ravb: Fix signed shift overflow   Eugeniu Rosca
• [U-Boot] [PATCH v2 07/13] x86: Fix signed shift overflow in MSR_IA32_APICBASE_BASE   Eugeniu Rosca
• [U-Boot] [PATCH v2 08/13] disk: part_dos: Fix signed shift overflow   Eugeniu Rosca
• [U-Boot] [PATCH v2 09/13] common.h: Fix signed shift overflow in cpumask_next()   Eugeniu Rosca
• [U-Boot] [PATCH v2 10/13] mmc: Fix read-past-end-of-array   Eugeniu Rosca
• [U-Boot] [PATCH v2 11/13] hashtable: Fix zero-sized array   Eugeniu Rosca
• [U-Boot] [PATCH v2 12/13] input: Fix zero-sized array   Eugeniu Rosca
• [U-Boot] [PATCH v2 13/13] configs: sandbox*: Enable UBSAN   Eugeniu Rosca
• [U-Boot] [PATCH v2 06/13] net: ravb: Fix signed shift overflow   Eugeniu Rosca
• [U-Boot] [PATCH v2 07/13] x86: Fix signed shift overflow in MSR_IA32_APICBASE_BASE   Eugeniu Rosca
• [U-Boot] hwmon in current uboot   Joe Rutledge
• [U-Boot] hwmon in current uboot   Joe Rutledge
• [U-Boot] [PATCH 0/2] sunxi: SPI: reset bus when enabling clock   Fahad Sadah
• [U-Boot] [PATCH 1/2] sunxi: SPI: add AHB gate and reset offsets   Fahad Sadah
• [U-Boot] [PATCH 2/2] sunxi: SPI: reset bus when enabling clock   Fahad Sadah
• [U-Boot] sunxi: SPI: reset bus when enabling clock   Fahad Sadah
• [U-Boot] [PATCH 1/2] sunxi: SPI: add AHB gate and reset offsets   Fahad Sadah
• [U-Boot] [PATCH 2/2] sunxi: SPI: reset bus when enabling clock   Fahad Sadah
• [U-Boot] [PATCH v2 40/53] spi: Add Allwinner A31 SPI driver   Fahad Sadah
• [U-Boot] [PATCH 0/2] Add Rock960 board support   Manivannan Sadhasivam
• [U-Boot] [PATCH 1/2] arm: dts: Add Rock960 devicetree support   Manivannan Sadhasivam
• [U-Boot] [PATCH 2/2] board: Add Vamrs Limited Rock960 board support   Manivannan Sadhasivam
• [U-Boot] [PATCH v2 0/2] Add Rock960 board support   Manivannan Sadhasivam
• [U-Boot] [PATCH v2 1/2] arm: dts: Add Rock960 devicetree support   Manivannan Sadhasivam
• [U-Boot] [PATCH v2 2/2] board: Add Vamrs Limited Rock960 board support   Manivannan Sadhasivam
• [U-Boot] [PATCH 0/1] Update instructions for HiSilicon HiKey board   Manivannan Sadhasivam
• [U-Boot] [PATCH 1/1] hisilicon: hikey: Update instructions based on latest source   Manivannan Sadhasivam
• [U-Boot] [PATCH 2/2] board: Add Vamrs Limited Rock960 board support   Manivannan Sadhasivam
• [U-Boot] [PATCH 0/2] Add Rock960 board support   Manivannan Sadhasivam
• [U-Boot] [PATCH 0/2] Add Rock960 board support   Manivannan Sadhasivam
• [U-Boot] [PATCH 0/2] Add Rock960 board support   Manivannan Sadhasivam
• [U-Boot] [PATCH 0/2] Add Rock960 board support   Manivannan Sadhasivam
• [U-Boot] [PATCH 01/13] pico-imx6ul: Convert to distro config   Otavio Salvador
• [U-Boot] [PATCH 02/13] pico-imx6ul: Convert to SPL   Otavio Salvador
• [U-Boot] [PATCH 03/13] pico-imx6ul: Add fastboot support   Otavio Salvador
• [U-Boot] [PATCH 04/13] pico-imx6ul: Add bmode support   Otavio Salvador
• [U-Boot] [PATCH 05/13] pico-imx6ul: Add support for the 512MB module   Otavio Salvador
• [U-Boot] [PATCH 06/13] pico-imx7d: Update the README file   Otavio Salvador
• [U-Boot] [PATCH 07/13] pico-imx6ul: Update the README file   Otavio Salvador
• [U-Boot] [PATCH 08/13] pico-imx6ul: Sync defconfig with new changes   Otavio Salvador
• [U-Boot] [PATCH 09/13] pico-imx6ul: Add bootmenu to choose the baseboard   Otavio Salvador
• [U-Boot] [PATCH 10/13] pico-imx6ul: Improve default DFU settings   Otavio Salvador
• [U-Boot] [PATCH 11/13] pico-imx6ul: Sync README with pico-imx7d   Otavio Salvador
• [U-Boot] [PATCH 12/13] pico-imx6ul: Add new pico-hobbit config   Otavio Salvador
• [U-Boot] [PATCH 13/13] pico-imx6ul: Remove CONFIG_FSL_USDHC from .h   Otavio Salvador
• [U-Boot] [PULL] Please pull u-boot-imx   Otavio Salvador
• [U-Boot] [PULL] Please pull u-boot-imx   Otavio Salvador
• [U-Boot] [PATCH] common: add board specific hook for os preboot config   Gerard Salvatella
• [U-Boot] [PATCH 0/4] arm: zynq: migrate to DM I2C driver   Olliver Schinagl
• [U-Boot] [PATCH v3 27/58] fastboot: sunxi: Update fastboot mmc default device   Olliver Schinagl
• [U-Boot] [PATCH] imx: imx6ull: fix pinmux input_val for uart5 rx pin   Heiko Schocher
• [U-Boot] [PATCH] efi_loader: don't allocate unusable RAM   Heinrich Schuchardt
• [U-Boot] Two CRC32 implementation in U-Boot, why?   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: don't allocate unusable RAM   Heinrich Schuchardt
• [U-Boot] 2018.09-rc1 breakage on orangepi pc2   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: don't allocate unusable RAM   Heinrich Schuchardt
• [U-Boot] [RFC 1/1] efi_loader: relocate pointer to tables   Heinrich Schuchardt
• [U-Boot] [RFC 1/1] efi_loader: relocate pointer to tables   Heinrich Schuchardt
• [U-Boot] [BUG] qemu-x86_defconfig does not build with GCC 8.1   Heinrich Schuchardt
• [U-Boot] [PATCH v1] Makefile: Don't generate position independent code   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] riscv: allow native compilation   Heinrich Schuchardt
• [U-Boot] [PATCH v1] Makefile: Don't generate position independent code   Heinrich Schuchardt
• [U-Boot] [PATCH v1] Makefile: Don't generate position independent code   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: avoid NULL dereference in efi_get_memory_map()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: efi_dp_get_next_instance() superfluous statemt   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: efi_dp_get_next_instance() superfluous statemt   Heinrich Schuchardt
• [U-Boot] [PATCH 00/17] fs: fat: extend FAT write operations   Heinrich Schuchardt
• [U-Boot] [PATCH 00/17] fs: fat: extend FAT write operations   Heinrich Schuchardt
• [U-Boot] [RFC] efi_loader: workaround for EDK2's shell.efi   Heinrich Schuchardt
• [U-Boot] [PATCH v1] Makefile: Don't generate position independent code   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] fat: provide position in debug message   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: fix a parameter check at CreateEvent()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_selftest: correct block device unit test   Heinrich Schuchardt
• [U-Boot] [PATCH 03/17] fs: fat: make directory iterator global for write use   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] fs: fix typo 'dumm'   Heinrich Schuchardt
• [U-Boot] [PATCH 00/15] efi_loader: EFI_UNICODE_COLLATION_PROTOCOL   Heinrich Schuchardt
• [U-Boot] [PATCH 01/15] lib: build charset.o only if needed   Heinrich Schuchardt
• [U-Boot] [PATCH 02/15] efi_loader: rename utf16_strlen, utf16_strnlen   Heinrich Schuchardt
• [U-Boot] [PATCH 03/15] lib: charset: utility functions for Unicode   Heinrich Schuchardt
• [U-Boot] [PATCH 04/15] test: unit tests for Unicode functions   Heinrich Schuchardt
• [U-Boot] [PATCH 05/15] lib: vsprintf: correct printing of Unicode strings   Heinrich Schuchardt
• [U-Boot] [PATCH 06/15] test: test printing Unicode   Heinrich Schuchardt
• [U-Boot] [PATCH 07/15] efi_loader: remove limit on variable length   Heinrich Schuchardt
• [U-Boot] [PATCH 08/15] efi_loader: don't use unlimited stack as buffer   Heinrich Schuchardt
• [U-Boot] [PATCH 09/15] efi_loader: buffer size for load options   Heinrich Schuchardt
• [U-Boot] [PATCH 10/15] lib: charset: remove obsolete functions   Heinrich Schuchardt
• [U-Boot] [PATCH 11/15] efi_loader: capitalization table   Heinrich Schuchardt
• [U-Boot] [PATCH 12/15] lib: charset: upper/lower case conversion   Heinrich Schuchardt
• [U-Boot] [PATCH 13/15] test: tests for utf_to_lower() utf_to_upper().   Heinrich Schuchardt
• [U-Boot] [PATCH 14/15] efi_loader: EFI_UNICODE_COLLATION_PROTOCOL   Heinrich Schuchardt
• [U-Boot] [PATCH 15/15] efi_selftest: EFI_UNICODE_COLLATION_PROTOCOL   Heinrich Schuchardt
• [U-Boot] [U-Boot,6/8] efi_loader: Pass file path to payload   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] fat: provide position in debug message   Heinrich Schuchardt
• [U-Boot] [PATCH] fs/fat: debug-print file read position during file_fat_read_at()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/3] rtc: rv3029: add to Kconfig   Heinrich Schuchardt
• [U-Boot] u-boot 2018.07/2018.09 'data abort' kernel start failure with GCC 8.2.0 on sun8i (H3)   Heinrich Schuchardt
• [U-Boot] u-boot 2018.07/2018.09 'data abort' kernel start failure with GCC 8.2.0 on sun8i (H3)   Heinrich Schuchardt
• [U-Boot] [PATCH v9 13/18] efi: Add a call to exit() along with why we can't use it   Heinrich Schuchardt
• [U-Boot] [PATCH v9 16/18] efi: Add more debugging for memory allocations   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_selftest: memory leak testing manage protocols   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] efi_loader: pass system table in loaded image protocol   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] efi_loader: pass system table in loaded image protocol   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] efi_selftest: test for loaded image protocol   Heinrich Schuchardt
• [U-Boot] [PATCH 01/15] lib: build charset.o only if needed   Heinrich Schuchardt
• [U-Boot] [PATCH 02/15] efi_loader: rename utf16_strlen, utf16_strnlen   Heinrich Schuchardt
• [U-Boot] [PATCH 04/15] test: unit tests for Unicode functions   Heinrich Schuchardt
• [U-Boot] [PATCH 05/15] lib: vsprintf: correct printing of Unicode strings   Heinrich Schuchardt
• [U-Boot] [PATCH 06/15] test: test printing Unicode   Heinrich Schuchardt
• [U-Boot] [PATCH 07/15] efi_loader: remove limit on variable length   Heinrich Schuchardt
• [U-Boot] [PATCH 11/15] efi_loader: capitalization table   Heinrich Schuchardt
• [U-Boot] [PATCH 02/15] efi_loader: rename utf16_strlen, utf16_strnlen   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] test: fix typo in cmd_ut_category() description   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] ARM: tegra: reserve unmapped RAM so EFI doesn't use it   Heinrich Schuchardt
• [U-Boot] [RFC 1/3] test/py: convert fs-test.sh to pytest   Heinrich Schuchardt
• [U-Boot] [PATCH V2 1/2] ARM: tegra: reserve unmapped RAM so EFI doesn't use it   Heinrich Schuchardt
• [U-Boot] [RFC 1/3] test/py: convert fs-test.sh to pytest   Heinrich Schuchardt
• [U-Boot] [PATCH v3 2/3] efi_loader: ARM: run EFI payloads non-secure   Heinrich Schuchardt
• [U-Boot] [PATCH v2 00/17][RESENT] efi_loader: EFI_UNICODE_COLLATION_PROTOCOL   Heinrich Schuchardt
• [U-Boot] [PATCH v2 01/17] vsprintf.c: use #if CONFIG_IS_ENABLED(EFI_LOADER)   Heinrich Schuchardt
• [U-Boot] [PATCH v2 02/17] test: print_ut.c use #if CONFIG_IS_ENABLED(EFI_LOADER)   Heinrich Schuchardt
• [U-Boot] [PATCH v2 03/17] lib: build charset.o only if needed   Heinrich Schuchardt
• [U-Boot] [PATCH v2 04/17] efi_loader: rename utf16_strlen, utf16_strnlen   Heinrich Schuchardt
• [U-Boot] [PATCH v2 05/17] lib: charset: utility functions for Unicode   Heinrich Schuchardt
• [U-Boot] [PATCH v2 06/17] test: unit tests for Unicode functions   Heinrich Schuchardt
• [U-Boot] [PATCH v2 07/17] lib: vsprintf: correct printing of Unicode strings   Heinrich Schuchardt
• [U-Boot] [PATCH v2 08/17] test: test printing Unicode   Heinrich Schuchardt
• [U-Boot] [PATCH v2 09/17] efi_loader: remove limit on variable length   Heinrich Schuchardt
• [U-Boot] [PATCH v2 10/17] efi_loader: don't use unlimited stack as buffer   Heinrich Schuchardt
• [U-Boot] [PATCH v2 11/17] efi_loader: buffer size for load options   Heinrich Schuchardt
• [U-Boot] [PATCH v2 12/17] lib: charset: remove obsolete functions   Heinrich Schuchardt
• [U-Boot] [PATCH v2 13/17] efi_loader: capitalization table   Heinrich Schuchardt
• [U-Boot] [PATCH 14/17] lib: charset: upper/lower case conversion   Heinrich Schuchardt
• [U-Boot] [PATCH v2 15/17] test: tests for utf_to_lower() utf_to_upper().   Heinrich Schuchardt
• [U-Boot] [PATCH v2 16/17] efi_loader: EFI_UNICODE_COLLATION_PROTOCOL   Heinrich Schuchardt
• [U-Boot] [PATCH v2 17/17] efi_selftest: EFI_UNICODE_COLLATION_PROTOCOL   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] spi: add support for ARM PL022 SPI controller   Quentin Schulz
• [U-Boot] [PATCH 2/2] arm: spear: enable SSP (SPI controllers) clocks when PL022 is enabled   Quentin Schulz
• [U-Boot] [PATCH] arm: spear: enable GPIO3 and 4 clocks when the GPIO controller driver is built   Quentin Schulz
• [U-Boot] [PATCH v2 1/3] spi: add support for ARM PL022 SPI controller   Quentin Schulz
• [U-Boot] [PATCH v2 2/3] arm: spear: enable SSP1, 2 and 3 clocks when SPI controller driver is built   Quentin Schulz
• [U-Boot] [PATCH v2 3/3] arm: spear: fix enabling of SSP2 clock   Quentin Schulz
• [U-Boot] [PATCH v4 07/13] regmap: Add raw read/write functions   Daniel Schwierzeck
• [U-Boot] [PATCH v6 00/27] SPI-NAND support   Daniel Schwierzeck
• [U-Boot] [PATCH 4/9] MIPS: use PRIx64 macros for printing ram size   Daniel Schwierzeck
• [U-Boot] [PATCH 2/4] mips: Add arch/mips/include/asm/atomic.h   Daniel Schwierzeck
• [U-Boot] [PATCH 1/4] mips: Add basic MediaTek MT7620/88 support   Daniel Schwierzeck
• [U-Boot] [GIT PULL] u-boot-mips/master   Daniel Schwierzeck
• [U-Boot] [PATCH 2/4] mips: Add arch/mips/include/asm/atomic.h   Daniel Schwierzeck
• [U-Boot] [PATCH 1/4] mips: Add basic MediaTek MT7620/88 support   Daniel Schwierzeck
• [U-Boot] [PATCH 1/3] pinctrl: bcm6838: add pinctrl support   Daniel Schwierzeck
• [U-Boot] [PATCH v2] spi: Add SPI driver for MT76xx SoCs   Daniel Schwierzeck
• [U-Boot] [PATCH 1/4] mips: Add basic MediaTek MT7620/88 support   Daniel Schwierzeck
• [U-Boot] [PATCH v2] spi: Add SPI driver for MT76xx SoCs   Daniel Schwierzeck
• [U-Boot] CONFIG_MIPS_BOOT_CMDLINE_LEGACY usage ?   Daniel Schwierzeck
• [U-Boot] CONFIG_MIPS_BOOT_CMDLINE_LEGACY usage ?   Daniel Schwierzeck
• [U-Boot] [PATCH] dm: core: fix devfdt_remap_addr_index()   Daniel Schwierzeck
• [U-Boot] [PATCH V2 1/3] pinctrl: bcm6838: add pinctrl support   Daniel Schwierzeck
• [U-Boot] [PATCH 3/5 v2] mips: Add LinkIt Smart 7688 support   Daniel Schwierzeck
• [U-Boot] [PATCH 4/5 v2] mips: Add Gardena Smart-Gateway board support   Daniel Schwierzeck
• [U-Boot] [PATCH v4] spi: Add SPI driver for MT76xx SoCs   Daniel Schwierzeck
• [U-Boot] [PATCH 3/5 v2] mips: Add LinkIt Smart 7688 support   Daniel Schwierzeck
• [U-Boot] [PATCH 1/5 v2] mips: Add basic MediaTek MT7620/88 support   Daniel Schwierzeck
• [U-Boot] [PATCH 3/3] Remove <inttypes.h> includes and PRI* usages in printf() entirely   Andy Shevchenko
• [U-Boot] [BUG] qemu-x86_defconfig does not build with GCC 8.1   Andy Shevchenko
• [U-Boot] [PATCH v1] Makefile: Don't generate position independent code   Andy Shevchenko
• [U-Boot] [PATCH v1] Makefile: Don't generate position independent code   Andy Shevchenko
• [U-Boot] [PATCH v1] Makefile: Don't generate position independent code   Andy Shevchenko
• [U-Boot] [PATCH v1] Makefile: Don't generate position independent code   Andy Shevchenko
• [U-Boot] [PATCH v1] Makefile: Don't generate position independent code   Andy Shevchenko
• [U-Boot] [PATCH v1] Makefile: Don't generate position independent code   Andy Shevchenko
• [U-Boot] [PATCH 5/6] serial: ns16550: fix debug uart putc called before init   Andy Shevchenko
• [U-Boot] [PATCH v1 2/2] x86: zImage: Propagate acpi_rsdp_addr to kernel via boot parameters   Andy Shevchenko
• [U-Boot] [PATCH] x86: zimage: Remove acpi_rsdp_addr propagation to kernel boot parameters   Andy Shevchenko
• [U-Boot] [PATCH v2 07/13] x86: Fix signed shift overflow in MSR_IA32_APICBASE_BASE   Andy Shevchenko
• [U-Boot] [PATCH 4/6] mvebu: select boot device at SoC level   Baruch Siach
• [U-Boot] [PATCH] doc/git-mailrc: add Stefan Roese to the kirkwood alias   Baruch Siach
• [U-Boot] [PATCH] tools: kwboot: Make kwboot more robust on a38x   Baruch Siach
• [U-Boot] [PATCH] arm64: mvebu: armada-8k: support environment in SD/eMMC   Baruch Siach
• [U-Boot] [PATCH] tools: kwboot: Make kwboot more robust on a38x   Baruch Siach
• [U-Boot] [PATCH] dts: mvebu: mcbin: drop redundant SD slot node   Baruch Siach
• [U-Boot] [PATCH 4/4] scsi: ceva: add ls1021a soc support.   Michal Simek
• [U-Boot] [PATCH] gpio: xilinx: Add support for using label property   Michal Simek
• [U-Boot] [RFC PATCH] gpio: zynq: Setup bank_name to dev->name   Michal Simek
• [U-Boot] [PATCH 1/1] arm: zynq: Fix device tree for Avnet Picozed boards   Michal Simek
• [U-Boot] [PATCH v2] gpio: xilinx: Not read output values via regs   Michal Simek
• [U-Boot] [PATCH 3/4] gpio: xilinx: Not read output values via regs   Michal Simek
• [U-Boot] [PATCH v1 14/17] cmd: fpga: Add support for missing fpga loadmk commands   Michal Simek
• [U-Boot] [PATCH] gpio: xilinx: Return 0 from xilinx_gpio_set_value   Michal Simek
• [U-Boot] [PATCH v2] gpio: xilinx: Add support for using label property   Michal Simek
• [U-Boot] [PATCH] gpio: xilinx: Add support for using label property   Michal Simek
• [U-Boot] [PATCH] mmc: sdhci-of-arasan: Do now show error message in case of deffered probe   Michal Simek
• [U-Boot] [PATCH v2 3/8] test/py: Import 'configparser' lower case to be python 3.x safe   Michal Simek
• [U-Boot] [GIT PULL] Xilinx fixes for v2018.09-rc2   Michal Simek
• [U-Boot] [GIT PULL] Xilinx fixes for v2018.09-rc2   Michal Simek
• [U-Boot] [GIT PULL] Xilinx fixes for v2018.09-rc2   Michal Simek
• [U-Boot] [PATCH v3 0/7] Fixes/Addition to use the USB Ethernet gadget with the DWC3 gadget controller   Michal Simek
• [U-Boot] [PATCH v3 0/7] Fixes/Addition to use the USB Ethernet gadget with the DWC3 gadget controller   Michal Simek
• [U-Boot] [PATCH v2 00/17] cmd: fpga: Fix fpga command handling and add some fpga tests   Michal Simek
• [U-Boot] [PATCH v2 01/17] cmd: fpga: Remove fit image support passed without fpga device   Michal Simek
• [U-Boot] [PATCH v2 02/17] test/py: Extend fpga command to test all fpga load types   Michal Simek
• [U-Boot] [PATCH v2 03/17] cmd: fpga: Move error handling to do_fpga()   Michal Simek
• [U-Boot] [PATCH v2 04/17] cmd: fpga: Move fpga_get_op to avoid local function declaration   Michal Simek
• [U-Boot] [PATCH v2 05/17] cmd: fpga: Cleanup error handling in connection to FPGA_NONE   Michal Simek
• [U-Boot] [PATCH v2 06/17] cmd: fpga: Move parameter checking for loadfs/loads   Michal Simek
• [U-Boot] [PATCH v2 07/17] cmd: fpga: Remove parameter checking from fpga loadfs command   Michal Simek
• [U-Boot] [PATCH v2 08/17] cmd: fpga: Clean wrong_parms handling   Michal Simek
• [U-Boot] [PATCH v2 09/17] cmd: fpga: Create new do_fpga_wrapper for using u-boot subcommands   Michal Simek
• [U-Boot] [PATCH v2 10/17] cmd: fpga: Extract fpga info command to separate function   Michal Simek
• [U-Boot] [PATCH v2 11/17] cmd: fpga: Fix dump and all direct fpga load commands   Michal Simek
• [U-Boot] [PATCH v2 12/17] cmd: fpga: Fix loadfs command   Michal Simek
• [U-Boot] [PATCH v2 13/17] cmd: fpga: Fix loadmk command   Michal Simek
• [U-Boot] [PATCH v2 14/17] cmd: fpga: Add support for missing fpga loadmk commands   Michal Simek
• [U-Boot] [PATCH v2 15/17] cmd: fpga: Use CMD_RET_FAILURE instead of simple 1   Michal Simek
• [U-Boot] [PATCH v2 16/17] cmd: fpga: Fix loads command   Michal Simek
• [U-Boot] [PATCH v2 17/17] MAINTAINERS: Add myself as the FPGA maintainer   Michal Simek
• [U-Boot] [PATCH v1 14/17] cmd: fpga: Add support for missing fpga loadmk commands   Michal Simek
• [U-Boot] [RESEND PATCH] usb: dwc3: convert to livetree   Michal Simek
• [U-Boot] [UBOOT PATCH 0/2] dm: core: Scan "/firmware" node by default   Michal Simek
• [U-Boot] [RFC PATCH] arm: zynq: read mac address from SPI flash memory   Michal Simek
• [U-Boot] [PATCH] arm: zynq: Remove useless comments from config file   Michal Simek
• [U-Boot] [PATCH 01/10] dm: fdt: scan for devices under /firmware too   Michal Simek
• [U-Boot] [PATCH 01/10] dm: fdt: scan for devices under /firmware too   Michal Simek
• [U-Boot] [PATCH] configs: Migrate CONFIG_NR_DRAM_BANKS   Michal Simek
• [U-Boot] [PATCH] dts: Fix typo in OF_LIVE Kconfig help   Michal Simek
• [U-Boot] [UBOOT PATCH 2/2] dm: core: Scan "/firmware" node by default   Michal Simek
• [U-Boot] [PATCH] dm: test: Fix typo in test-main comment   Michal Simek
• [U-Boot] env: Merge Rockchip, Sunxi, Zynq and ZynqMP   Michal Simek
• [U-Boot] [U-Boot,v2] Convert CONFIG_BOARD_LATE_INIT to Kconfig   Michal Simek
• [U-Boot] [UBOOT PATCH 2/2] dm: core: Scan "/firmware" node by default   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Handle CONFIG_BOARD_LATE_INIT via Kconfig   Michal Simek
• [U-Boot] [U-Boot,v2] Convert CONFIG_BOARD_LATE_INIT to Kconfig   Michal Simek
• [U-Boot] [PATCH v2 3/8] test/py: Import 'configparser' lower case to be python 3.x safe   Michal Simek
• [U-Boot] [PATCH 1/3] arm64: zynqmp: Move PM version related macros to .h   Michal Simek
• [U-Boot] [PATCH 2/3] arm64: zynqmp: Return pmufw version for zynqmp_pmufw_version()   Michal Simek
• [U-Boot] [PATCH 3/3] fpga: zynqmp: Modify PL bitstream loading sequence   Michal Simek
• [U-Boot] [PATCH] ARM: socfpga: Convert to DM serial   Goldschmidt Simon
• [U-Boot] [PATCH v3 07/13] regmap: Add raw read/write functions   Mario Six
• [U-Boot] [PATCH v3 07/13] regmap: Add raw read/write functions   Mario Six
• [U-Boot] [PATCH v3 05/13] regmap: Introduce init_range   Mario Six
• [U-Boot] [PATCH v3 13/13] misc: Add IHS FPGA driver   Mario Six
• [U-Boot] [PATCH v3 02/13] regmap: Fix documentation   Mario Six
• [U-Boot] [PATCH v4 01/13] test: regmap: Increase size of syscon0 memory   Mario Six
• [U-Boot] [PATCH v4 02/13] regmap: Fix documentation   Mario Six
• [U-Boot] [PATCH v4 03/13] regmap: Add documentation   Mario Six
• [U-Boot] [PATCH v4 04/13] regmap: Improve error handling   Mario Six
• [U-Boot] [PATCH v4 05/13] regmap: Introduce init_range   Mario Six
• [U-Boot] [PATCH v4 06/13] regmap: Add error output   Mario Six
• [U-Boot] [PATCH v4 07/13] regmap: Add raw read/write functions   Mario Six
• [U-Boot] [PATCH v4 08/13] regmap: Support reading from specific range   Mario Six
• [U-Boot] [PATCH v4 09/13] regmap: Define regmap_{get,set}   Mario Six
• [U-Boot] [PATCH v4 10/13] test: regmap: Add test for regmap_{set, get}   Mario Six
• [U-Boot] [PATCH v4 11/13] misc: Sort Makefile entries   Mario Six
• [U-Boot] [PATCH v4 12/13] misc: Add gdsys_soc driver   Mario Six
• [U-Boot] [PATCH v4 13/13] misc: Add IHS FPGA driver   Mario Six
• [U-Boot] [PATCH v4 01/17] ram: Add driver for MPC83xx   Mario Six
• [U-Boot] [PATCH v4 02/17] powerpc: Add read*_*/write*_* macros   Mario Six
• [U-Boot] [PATCH v4 03/17] sysreset: Add get_status method   Mario Six
• [U-Boot] [PATCH v4 04/17] test: Add tests for sysreset_get_status   Mario Six
• [U-Boot] [PATCH v4 05/17] board_f: Add reset status printing   Mario Six
• [U-Boot] [PATCH v4 06/17] mpc83xx: Add sysreset driver   Mario Six
• [U-Boot] [PATCH v4 07/17] clk: Add MPC83xx clock driver   Mario Six
• [U-Boot] [PATCH v4 08/17] timer: Sort Makefile entries   Mario Six
• [U-Boot] [PATCH v4 09/17] timer: Add MPC83xx timer driver   Mario Six
• [U-Boot] [PATCH v4 10/17] common: board_f: Sort includes   Mario Six
• [U-Boot] [PATCH v4 11/17] init: Fix documentation   Mario Six
• [U-Boot] [PATCH v4 12/17] board_f: Use static print_cpuinfo if CONFIG_CPU is active   Mario Six
• [U-Boot] [PATCH v4 13/17] cpu: Fix cpu.h documentation   Mario Six
• [U-Boot] [PATCH v4 14/17] cpu: Add cpu_probe_all method   Mario Six
• [U-Boot] [PATCH v4 15/17] test: Add tests for CPU uclass   Mario Six
• [U-Boot] [PATCH v4 16/17] cpu: Add MPC83xx CPU driver   Mario Six
• [U-Boot] [PATCH v4 17/17] misc: Add MPC83xx serdes driver   Mario Six
• [U-Boot] [PATCH v4 07/13] regmap: Add raw read/write functions   Mario Six
• [U-Boot] [PATCH v4 01/13] test: regmap: Increase size of syscon0 memory   Mario Six
• [U-Boot] [PATCH v4 07/13] regmap: Add raw read/write functions   Mario Six
• [U-Boot] [PATCH v3 1/8] drivers: Add AXI uclass   Mario Six
• [U-Boot] [PATCH v3 2/8] axi: Add ihs_axi driver   Mario Six
• [U-Boot] [PATCH v3 3/8] axi: Add AXI sandbox driver and simple emulator   Mario Six
• [U-Boot] [PATCH v3 4/8] sandbox: Add and build AXI bus and device   Mario Six
• [U-Boot] [PATCH v3 5/8] test: Add AXI test   Mario Six
• [U-Boot] [PATCH v3 6/8] cmd: Add axi command   Mario Six
• [U-Boot] [PATCH v3 7/8] video: Sort Makefile entries   Mario Six
• [U-Boot] [PATCH v3 8/8] video_display: Add Xilinx LogiCore DP TX   Mario Six
• [U-Boot] [PATCH v2 00/18] spi: mpc8xxx: DM conversion   Mario Six
• [U-Boot] [PATCH v6 01/14] test: regmap: Increase size of syscon0 memory   Mario Six
• [U-Boot] [PATCH v6 02/14] regmap: Fix documentation   Mario Six
• [U-Boot] [PATCH v6 03/14] regmap: Add documentation   Mario Six
• [U-Boot] [PATCH v6 04/14] regmap: Improve error handling   Mario Six
• [U-Boot] [PATCH v6 05/14] regmap: Introduce init_range   Mario Six
• [U-Boot] [PATCH v6 06/14] regmap: Add error output   Mario Six
• [U-Boot] [PATCH v6 07/14] mips: Implement {in, out}_{le, be}_{16, 32, 64} and {in, out}_8   Mario Six
• [U-Boot] [PATCH v6 08/14] regmap: Add raw read/write functions   Mario Six
• [U-Boot] [PATCH v6 09/14] regmap: Support reading from specific range   Mario Six
• [U-Boot] [PATCH v6 10/14] regmap: Define regmap_{get,set}   Mario Six
• [U-Boot] [PATCH v6 11/14] test: regmap: Add test for regmap_{set, get}   Mario Six
• [U-Boot] [PATCH v6 12/14] misc: Sort Makefile entries   Mario Six
• [U-Boot] [PATCH v6 13/14] misc: Add gdsys_soc driver   Mario Six
• [U-Boot] [PATCH v6 14/14] misc: Add IHS FPGA driver   Mario Six
• [U-Boot] UBI fixable bit-flip issue   Mark Spieth
• [U-Boot] [U-boot] 2018.09-rc1 Browsing source code of SPL and U-boot proper   Sreekesh Sreelal
• [U-Boot] Chain loading U-Boot on ARM v7, data abort   Neil Stainton
• [U-Boot] Chain loading U-Boot on ARM v7, data abort   Neil Stainton
• [U-Boot] [PATCH] u-boot: align cache flushes in load_elf_image_shdr to line boundaries   Neil Stainton
• [U-Boot] Unable to boot evb-ast2500   Joel Stanley
• [U-Boot] Unable to boot evb-ast2500   Joel Stanley
• [U-Boot] u-boot 2018.07/2018.09 'data abort' kernel start failure with GCC 8.2.0 on sun8i (H3)   Auston Stewart
• [U-Boot] u-boot 2018.07/2018.09 'data abort' kernel start failure with GCC 8.2.0 on sun8i (H3)   Auston Stewart
• [U-Boot] u-boot 2018.07/2018.09 'data abort' kernel start failure with GCC 8.2.0 on sun8i (H3)   Auston Stewart
• [U-Boot] u-boot 2018.07/2018.09 'data abort' kernel start failure with GCC 8.2.0 on sun8i (H3)   Auston Stewart
• [U-Boot] [PATCH v3 3/7] drivers: net: designware: Add reading of DT phy-handle node   Grygorii Strashko
• [U-Boot] [PATCH v3 0/3] Expand dp83867-driver   Grygorii Strashko
• [U-Boot] [PATCH 0/3] Fix for rare beaglebone ethernet failures   Grygorii Strashko
• [U-Boot] [PATCH v4 3/7] drivers: net: designware: Add reading of DT phy-handle node   Grygorii Strashko
• [U-Boot] [PATCH 2/3] scsi: ceva: add ls1043a soc support   York Sun
• [U-Boot] [PATCH] net: fman: Support both new and legacy FMan Compatibles   York Sun
• [U-Boot] Questions about loading U-Boot from ATF   York Sun
• [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   York Sun
• [U-Boot] [PATCH v3 1/8] armv8: enable BLK code configuration   York Sun
• [U-Boot] [PATCH 3/3, v2] arm64: ls1043aqds: enable DM support for sata   York Sun
• [U-Boot] [PATCH 3/4] arm: ls1021atwr: enable DM support for sata   York Sun
• [U-Boot] [PATCH 1/1] mtd: nand: fsl_ifc: Fix handling of bitflips in erased pages   York Sun
• [U-Boot] [PATCH v4 1/8] armv8: enable BLK code configuration   York Sun
• [U-Boot] [PATCH 3/3, v2] arm64: ls1043aqds: enable DM support for sata   York Sun
• [U-Boot] [PATCH 3/4] arm: ls1021atwr: enable DM support for sata   York Sun
• [U-Boot] [PATCH v7 0/8] NXP LS1046A SMMU enabling patches   York Sun
• [U-Boot] [PATCH v3 2/2] armv8: layerscape: move ns_dev[] define from h to c file.   York Sun
• [U-Boot] [PATCH 1/1] mtd: nand: fsl_ifc: Fix handling of bitflips in erased pages   York Sun
• [U-Boot] [PATCH v4 1/8] armv8: enable BLK code configuration   York Sun
• [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
• [U-Boot] [PATCH] board: freescale: ls1012ardb: Add command to switch QSPI bank   York Sun
• [U-Boot] [PATCH] arm: ls102xa: Fix RGMII phy-connection-type FDT fixup   York Sun
• [U-Boot] [PATCH v2] Board: ls1088ardb: Enable PCIe config for Secure boot defconfigs   York Sun
• [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   York Sun
• [U-Boot] [PATCH 1/2] fsl/mc: Limit the ethernet name to ETH_NAME_LEN   York Sun
• [U-Boot] [PATCH 2/2] net: Increase ethernet name string size to 20 chars   York Sun
• [U-Boot] [PATCH v8 1/8] armv8: fsl-layerscape: add missing register blocks base address defines   York Sun
• [U-Boot] [PATCH 1/1] mtd: nand: fsl_ifc: Fix handling of bitflips in erased pages   York Sun
• [U-Boot] [PATCH v4 1/2] armv8: layerscape: move ns_dev[] define from h to c file.   York Sun
• [U-Boot] [PATCH v6 1/8] dm: mmc: use block layer in mmc driver   York Sun
• [U-Boot] [PATCH 1/8] UBSAN: run-time undefined behavior sanity checker   York Sun
• [U-Boot] [PATCH] driver: net: fsl-mc: Memset MC reserve red memory before usage   York Sun
• [U-Boot] [v2 patch] net: fman: Support both new and legacy FMan Compatibles   York Sun
• [U-Boot] [PATCH 01/18] gpio: mpc8xxx: add support for Layerscape SoC   York Sun
• [U-Boot] Please pull u-boot-fsl-qoriq master   York Sun
• [U-Boot] [PATCH] armv8: layerscape: Build u-boot-with-spl.bin for selected boards   York Sun
• [U-Boot] [PATCH] armv8: fsl-layerscape: Update README.falcon for compression   York Sun
• [U-Boot] [PATCH] driver: net: fsl-mc: Memset MC reserve red memory before usage   York Sun
• [U-Boot] [PATCH v6 1/8] dm: mmc: use block layer in mmc driver   York Sun
• [U-Boot] u-boot release and feature set   York Sun
• [U-Boot] u-boot release and feature set   York Sun
• [U-Boot] u-boot release and feature set   York Sun
• [U-Boot] xyz-modem: Change getc timeout loop waiting   Alexander Sverdlin
• [U-Boot] xyz-modem: Change getc timeout loop waiting   Alexander Sverdlin
• [U-Boot] xyz-modem: Change getc timeout loop waiting   Alexander Sverdlin
• [U-Boot] [PATCH 00/17] fs: fat: extend FAT write operations   AKASHI Takahiro
• [U-Boot] [PATCH 00/17] fs: fat: extend FAT write operations   AKASHI Takahiro
• [U-Boot] [RFC] efi_loader: workaround for EDK2's shell.efi   AKASHI Takahiro
• [U-Boot] [PATCH] efi_loader: execute image's unload function   AKASHI Takahiro
• [U-Boot] [PATCH] efi_loader: set image_base and image_size to correct values   AKASHI Takahiro
• [U-Boot] [RFC] efi_loader: workaround for EDK2's shell.efi   AKASHI Takahiro
• [U-Boot] [RFC] efi_loader: workaround for EDK2's shell.efi   AKASHI Takahiro
• [U-Boot] [PATCH] efi_loader: fix a parameter check at CreateEvent()   AKASHI Takahiro
• [U-Boot] [PATCH 03/17] fs: fat: make directory iterator global for write use   AKASHI Takahiro
• [U-Boot] [RFC 0/3] test/py: add filesystem test scripts   AKASHI Takahiro
• [U-Boot] [RFC 1/3] test/py: convert fs-test.sh to pytest   AKASHI Takahiro
• [U-Boot] [RFC 2/3] test/py: fs: add extended write operation test   AKASHI Takahiro
• [U-Boot] [RFC 3/3] test/py: fs: add fstest/mkdir test   AKASHI Takahiro
• [U-Boot] [RFC 1/3] test/py: convert fs-test.sh to pytest   AKASHI Takahiro
• [U-Boot] [RFC 1/3] test/py: convert fs-test.sh to pytest   AKASHI Takahiro
• [U-Boot] [RFC 1/3] test/py: convert fs-test.sh to pytest   AKASHI Takahiro
• [U-Boot] [RFC 1/3] test/py: convert fs-test.sh to pytest   AKASHI Takahiro
• [U-Boot] [PATCH] ARM: dts: socfpga: Add u-boot, dm-pre-reloc to necessary clock nodes   Ley Foon Tan
• [U-Boot] [PATCH] mmc: socfpga: Add clock framework support   Ley Foon Tan
• [U-Boot] [PATCH 1/3] ARM: socfpga: clk: Obtain handoff base clock via DM   Ley Foon Tan
• [U-Boot] [PATCH 2/3] ARM: socfpga: clk: Make L4SP and MMC clock calculation Gen5 only   Ley Foon Tan
• [U-Boot] [PATCH 3/3] ARM: socfpga: clk: Drop unused variables on Arria10   Ley Foon Tan
• [U-Boot] [PATCH] clk: socfpga: Add initial Arria10 clock driver   Ley Foon Tan
• [U-Boot] [RFC][PATCH] cmd: clk: Add trivial implementation of clock dump for DM   Ley Foon Tan
• [U-Boot] [PATCH 1/3] ARM: socfpga: clk: Obtain handoff base clock via DM   Ley Foon Tan
• [U-Boot] [PATCH] ARM: dts: socfpga: Add u-boot, dm-pre-reloc to necessary clock nodes   Ley Foon Tan
• [U-Boot] [PATCH V2 1/3] ARM: socfpga: clk: Obtain handoff base clock via DM   Ley Foon Tan
• [U-Boot] [PATCH] usb: dwc2: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH] arm: dts: socfpga: stratix10: Move reset manager node to top   Ley Foon Tan
• [U-Boot] [PATCH] gpio: dwapb_gpio: Enable get_function support   Ley Foon Tan
• [U-Boot] [PATCH] arm: socfpga: Fix SYSMGR_FPGAINTF_EMACx bit mask   Ley Foon Tan
• [U-Boot] [PATCH] arm: dts: socfpga: stratix10: Move reset manager node to top   Ley Foon Tan
• [U-Boot] [PATCH] arm: dts: socfpga: stratix10: Move reset manager node to top   Ley Foon Tan
• [U-Boot] [PATCH] usb: dwc2: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH] gpio: dwapb_gpio: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH] gpio: dwapb_gpio: Change to use dev_read_addr()   Ley Foon Tan
• [U-Boot] [PATCH] gpio: dwapb_gpio: Enable get_function support   Ley Foon Tan
• [U-Boot] [PATCH] arm: socfpga: Fix SYSMGR_FPGAINTF_EMACx bit mask   Ley Foon Tan
• [U-Boot] [PATCH v2] usb: dwc2: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v2] gpio: dwapb_gpio: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v2] gpio: dwapb_gpio: Enable get_function support   Ley Foon Tan
• [U-Boot] [PATCH v2] gpio: dwapb_gpio: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v2] usb: dwc2: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v2] gpio: dwapb_gpio: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v2] usb: dwc2: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH] arm: socfpga: stratix10: Enable EMAC to FPGA bridge based on handoff   Ley Foon Tan
• [U-Boot] [PATCH] arm: socfpga: stratix10: Fix mailbox urgent command with urgent register   Ley Foon Tan
• [U-Boot] [PATCH v3 1/2] gpio: Add struct reset_ctl_bulk   Ley Foon Tan
• [U-Boot] [PATCH v3 2/2] gpio: dwapb_gpio: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v3] usb: dwc2: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v3] usb: dwc2: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v3 2/2] gpio: dwapb_gpio: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v3 1/2] gpio: Add struct reset_ctl_bulk   Ley Foon Tan
• [U-Boot] [PATCH v4] gpio: dwapb_gpio: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH v4] gpio: dwapb_gpio: Add reset ctrl to driver   Ley Foon Tan
• [U-Boot] [PATCH] tools: kwboot: Make kwboot more robust on a38x   Willy Tarreau
• [U-Boot] [PATCH v5 00/27] SPI-NAND support   Jagan Teki
• [U-Boot] [PATCH] spi: kirkwood: add orion-spi compatible string   Jagan Teki
• [U-Boot] [PATCH 1/2] spi: kirkwood: Get drvdata in .ofdata_to_platdata   Jagan Teki
• [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
• [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
• [U-Boot] [PATCH v6 00/27] SPI-NAND support   Jagan Teki
• [U-Boot] [PATCH v6 00/27] SPI-NAND support   Jagan Teki
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [linux-sunxi] [PATCH v2 00/13] Allwinner H6 support (w/ SPL)   Jagan Teki
• [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
• [U-Boot] [PATCH 0/7] ARM: dts: sunxi: Update dts(i) files from   Jagan Teki
• [U-Boot] [PATCH 1/7] ARM: dts: sun4i: Update A10 dts(i) files from Linux   Jagan Teki
• [U-Boot] [PATCH 2/7] ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux   Jagan Teki
• [U-Boot] [PATCH 3/7] ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux   Jagan Teki
• [U-Boot] [PATCH 4/7] ARM: dts: sun7i: Update A20 dts(i) files from Linux   Jagan Teki
• [U-Boot] [PATCH 5/7] ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux   Jagan Teki
• [U-Boot] [PATCH 6/7] ARM: dts: sun8i: Update A83T dts(i) files from Linux   Jagan Teki
• [U-Boot] [PATCH 7/7] ARM: dts: sun8i: Update R40/V40 dts(i) files from Linux   Jagan Teki
• [U-Boot] [PATCH 0/7] ARM: dts: sunxi: Update dts(i) files from Linux-4.18-rc3   Jagan Teki
• [U-Boot] [PATCH 00/42] clk: Add Allwinner CLK, RESET support   Jagan Teki
• [U-Boot] [PATCH 01/42] clk: Kconfig: Ascending order to sub directiory kconfigs   Jagan Teki
• [U-Boot] [PATCH 02/42] clk: Add Allwinner A64 CLK driver   Jagan Teki
• [U-Boot] [PATCH 03/42] reset: Add default request ops   Jagan Teki
• [U-Boot] [PATCH 04/42] reset: Add Allwinner RESET driver   Jagan Teki
• [U-Boot] [PATCH 05/42] clk: sunxi: Add Allwinner H3/H5 CLK driver   Jagan Teki
• [U-Boot] [PATCH 06/42] clk: sunxi: Add Allwinner A10/A20 CLK driver   Jagan Teki
• [U-Boot] [PATCH 07/42] clk: sunxi: Add Allwinner A10s/A13 CLK driver   Jagan Teki
• [U-Boot] [PATCH 08/42] clk: sunxi: Add Allwinner A31 CLK driver   Jagan Teki
• [U-Boot] [PATCH 09/42] clk: sunxi: Add Allwinner A23 CLK driver   Jagan Teki
• [U-Boot] [PATCH 10/42] clk: sunxi: a23: Add CLK support for A33   Jagan Teki
• [U-Boot] [PATCH 11/42] clk: sunxi: Add Allwinner A83T CLK driver   Jagan Teki
• [U-Boot] [PATCH 12/42] clk: sunxi: Add Allwinner R40 CLK driver   Jagan Teki
• [U-Boot] [PATCH 13/42] clk: sunxi: Add Allwinner V3S CLK driver   Jagan Teki
• [U-Boot] [PATCH 14/42] sunxi: Enable CLK   Jagan Teki
• [U-Boot] [PATCH 15/42] musb-new: sunxi: Use CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH 16/42] phy: sun4i-usb: Use CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH 17/42] sunxi: usb: Switch to Generic host controllers   Jagan Teki
• [U-Boot] [PATCH 18/42] usb: host: Drop [e-o]hci-sunxi drivers   Jagan Teki
• [U-Boot] [PATCH 19/42] clk: sunxi: Implement AHB bus MMC clocks   Jagan Teki
• [U-Boot] [PATCH 20/42] clk: sunxi: Implement direct MMC clocks   Jagan Teki
• [U-Boot] [PATCH 21/42] clk: sunxi: Implement AHB bus MMC resets   Jagan Teki
• [U-Boot] [PATCH 22/42] reset: Add get reset by name optionally   Jagan Teki
• [U-Boot] [PATCH 23/42] reset: Add reset valid   Jagan Teki
• [U-Boot] [PATCH 24/42] dm: mmc: sunxi: Add CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH 25/42] fastboot: sunxi: Update fastboot mmc default device   Jagan Teki
• [U-Boot] [PATCH 26/42] env: sunxi: Update default env fat device   Jagan Teki
• [U-Boot] [PATCH 27/42] sunxi: Use mmc_bootdev=2 for MMC2 boot   Jagan Teki
• [U-Boot] [PATCH 28/42] sunxi: A20: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH 29/42] mmc: sunxi: Add mmc, emmc H5/A64 compatible   Jagan Teki
• [U-Boot] [PATCH 30/42] sunxi: H3_H5: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH 31/42] sunxi: A64: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH 32/42] mmc: sunxi: Add A83T emmc compatible   Jagan Teki
• [U-Boot] [PATCH 33/42] sunxi: A83T: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH 34/42] sunxi: V40: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH 35/42] sunxi: A13/A31: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH 36/42] sunxi: A23/A33/V3S: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH 37/42] clk: sunxi: Implement SPI clocks   Jagan Teki
• [U-Boot] [PATCH 38/42] clk: sunxi: Implement SPI resets   Jagan Teki
• [U-Boot] [PATCH 39/42] spi: sun4i: Add CLK support   Jagan Teki
• [U-Boot] [PATCH 40/42] spi: Add Allwinner A31 SPI driver   Jagan Teki
• [U-Boot] [PATCH 41/42] clk: sunxi: Implement UART clocks   Jagan Teki
• [U-Boot] [PATCH 42/42] clk: sunxi: Implement UART resets   Jagan Teki
• [U-Boot] [PATCH v6 00/27] SPI-NAND support   Jagan Teki
• [U-Boot] [PATCH 0/2] sunxi: SPI: reset bus when enabling clock   Jagan Teki
• [U-Boot] DM_SPI, DM_SPI_FLASH due 2018.09   Jagan Teki
• [U-Boot] [PATCH] spi: Zap fsl_espi driver   Jagan Teki
• [U-Boot] [PATCH v3] drivers: spi: migrate cf_spi to DM   Jagan Teki
• [U-Boot] [PATCH v4] spi: ti_qspi: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH v4] spi: davinci: Full dm conversion   Jagan Teki
• [U-Boot] [RFC PATCH v2 3/6] dm: usb: Add UCLASS_USB_DEV_GENERIC shutdown   Jagan Teki
• [U-Boot] [PATCH] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle   Jagan Teki
• [U-Boot] [PATCH v2 0/7] ARM: dts: sunxi: Update dts(i) files from Linux-v4.18-rc3   Jagan Teki
• [U-Boot] [PATCH v2 1/7] ARM: dts: sun4i: Update A10 dts(i) files from Linux-v4.18-rc3   Jagan Teki
• [U-Boot] [PATCH v2 2/7] ARM: dts: sun5i: Update A10s/A13/gr8/r8 dts(i) files from Linux-v4.18-rc3   Jagan Teki
• [U-Boot] [PATCH v2 3/7] ARM: dts: sun6i: Update A31/A31s dts(i) files from Linux-v4.18-rc3   Jagan Teki
• [U-Boot] [PATCH v2 4/7] ARM: dts: sun7i: Update A20 dts(i) files from Linux-v4.18-rc3   Jagan Teki
• [U-Boot] [PATCH v2 5/7] ARM: dts: sun8i: Update A23/A33/r16 dts(i) files from Linux-v4.18-rc3   Jagan Teki
• [U-Boot] [PATCH v2 6/7] ARM: dts: sun8i: Update A83T dts(i) files from Linux-v4.18-rc3   Jagan Teki
• [U-Boot] [PATCH v2 7/7] ARM: dts: sun8i: Update R40/V40 dts(i) files from Linux-v4.18-rc3   Jagan Teki
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH] spi: Add SPI driver for MT76xx SoCs   Jagan Teki
• [U-Boot] [PATCH 1/2] spi: add support for ARM PL022 SPI controller   Jagan Teki
• [U-Boot] [PATCH v2 00/53] clk: Add Allwinner CLK, RESET support   Jagan Teki
• [U-Boot] [PATCH v2 01/53] clk: Kconfig: Ascending order to sub directiory kconfigs   Jagan Teki
• [U-Boot] [PATCH v2 02/53] clk: Add Allwinner A64 CLK driver   Jagan Teki
• [U-Boot] [PATCH v2 03/53] reset: Add default request ops   Jagan Teki
• [U-Boot] [PATCH v2 04/53] reset: Add Allwinner RESET driver   Jagan Teki
• [U-Boot] [PATCH v2 05/53] clk: sunxi: Add Allwinner H3/H5 CLK driver   Jagan Teki
• [U-Boot] [PATCH v2 06/53] clk: sunxi: Add Allwinner A10/A20 CLK driver   Jagan Teki
• [U-Boot] [PATCH v2 07/53] clk: sunxi: Add Allwinner A10s/A13 CLK driver   Jagan Teki
• [U-Boot] [PATCH v2 08/53] clk: sunxi: Add Allwinner A31 CLK driver   Jagan Teki
• [U-Boot] [PATCH v2 09/53] clk: sunxi: Add Allwinner A23 CLK driver   Jagan Teki
• [U-Boot] [PATCH v2 10/53] clk: sunxi: a23: Add CLK support for A33   Jagan Teki
• [U-Boot] [PATCH v2 11/53] clk: sunxi: Add Allwinner A83T CLK driver   Jagan Teki
• [U-Boot] [PATCH v2 12/53] clk: sunxi: Add Allwinner R40 CLK driver   Jagan Teki
• [U-Boot] [PATCH v2 13/53] clk: sunxi: Add Allwinner V3S CLK driver   Jagan Teki
• [U-Boot] [PATCH v2 14/53] sunxi: Enable CLK   Jagan Teki
• [U-Boot] [PATCH v2 15/53] musb-new: sunxi: Use CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH v2 16/53] phy: sun4i-usb: Use CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH v2 17/53] sunxi: usb: Switch to Generic host controllers   Jagan Teki
• [U-Boot] [PATCH v2 18/53] usb: host: Drop [e-o]hci-sunxi drivers   Jagan Teki
• [U-Boot] [PATCH v2 19/53] clk: sunxi: Implement AHB bus MMC clocks   Jagan Teki
• [U-Boot] [PATCH v2 20/53] clk: sunxi: Implement direct MMC clocks   Jagan Teki
• [U-Boot] [PATCH v2 21/53] clk: sunxi: Implement AHB bus MMC resets   Jagan Teki
• [U-Boot] [PATCH v2 22/53] reset: Add get reset by name optionally   Jagan Teki
• [U-Boot] [PATCH v2 23/53] reset: Add reset valid   Jagan Teki
• [U-Boot] [PATCH v2 24/53] dm: mmc: sunxi: Add CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH v2 25/53] fastboot: sunxi: Update fastboot mmc default device   Jagan Teki
• [U-Boot] [PATCH v2 26/53] env: sunxi: Update default env fat device   Jagan Teki
• [U-Boot] [PATCH v2 27/53] sunxi: Use mmc_bootdev=2 for MMC2 boot   Jagan Teki
• [U-Boot] [PATCH v2 28/53] sunxi: A20: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH v2 29/53] mmc: sunxi: Add mmc, emmc H5/A64 compatible   Jagan Teki
• [U-Boot] [PATCH v2 30/53] sunxi: H3_H5: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH v2 31/53] sunxi: A64: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH v2 32/53] mmc: sunxi: Add A83T emmc compatible   Jagan Teki
• [U-Boot] [PATCH v2 33/53] sunxi: A83T: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH v2 34/53] sunxi: V40: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH v2 35/53] sunxi: A13/A31: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH v2 36/53] sunxi: A23/A33/V3S: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH v2 37/53] clk: sunxi: Implement SPI clocks   Jagan Teki
• [U-Boot] [PATCH v2 38/53] clk: sunxi: Implement SPI resets   Jagan Teki
• [U-Boot] [PATCH v2 39/53] spi: sun4i: Add CLK support   Jagan Teki
• [U-Boot] [PATCH v2 40/53] spi: Add Allwinner A31 SPI driver   Jagan Teki
• [U-Boot] [PATCH v2 41/53] clk: sunxi: Implement UART clocks   Jagan Teki
• [U-Boot] [PATCH v2 42/53] clk: sunxi: Implement UART resets   Jagan Teki
• [U-Boot] [PATCH v2 43/53] clk: sunxi: Implement Ethernet clocks   Jagan Teki
• [U-Boot] [PATCH v2 44/53] clk: sunxi: Implement Ethernet resets   Jagan Teki
• [U-Boot] [PATCH v2 45/53] net: sunxi_emac: Add CLK support   Jagan Teki
• [U-Boot] [PATCH v2 46/53] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle   Jagan Teki
• [U-Boot] [PATCH v2 47/53] net: sun8i_emac: Add CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH v2 48/53] clk: Get the CLK by index without device   Jagan Teki
• [U-Boot] [PATCH v2 49/53] clk: Use clk_get_by_index_tail()   Jagan Teki
• [U-Boot] [PATCH v2 50/53] reset: Get the RESET by index without device   Jagan Teki
• [U-Boot] [PATCH v2 51/53] clk: sunxi: h3: Implement EPHY CLK and RESET   Jagan Teki
• [U-Boot] [PATCH v2 52/53] net: sun8i_emac: Add EPHY CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH v2 53/53] board: sunxi: gmac: Remove Ethernet clock and reset   Jagan Teki
• [U-Boot] [PATCH v2] spi: Add SPI driver for MT76xx SoCs   Jagan Teki
• [U-Boot] [PATCH v2 00/18] spi: mpc8xxx: DM conversion   Jagan Teki
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Jagan Teki
• [U-Boot] [PATCH v2 7/7] ARM: dts: sun8i: Update R40/V40 dts(i) files from Linux-v4.18-rc3   Jagan Teki
• [U-Boot] [linux-sunxi] [PATCH] sunxi: A64: fix default DRAM_ODT_EN symbol   Jagan Teki
• [U-Boot] [PATCH v2 01/53] clk: Kconfig: Ascending order to sub directiory kconfigs   Jagan Teki
• [U-Boot] [PATCH v2 7/7] ARM: dts: sun8i: Update R40/V40 dts(i) files from Linux-v4.18-rc3   Jagan Teki
• [U-Boot] [PATCH 6/7] ARM: dts: sun8i: Update A83T dts(i) files from Linux   Jagan Teki
• [U-Boot] [linux-sunxi] [PATCH] sunxi: A64: fix default DRAM_ODT_EN symbol   Jagan Teki
• [U-Boot] [PATCH] configs: sun7i: Fix to use emmc dts for OLinuXino_MICRO-eMMC   Jagan Teki
• [U-Boot] [ANN] U-Boot v2018.09-rc2 released   Jagan Teki
• [U-Boot] [PATCH v2 2/2] board: sunxi: sun8i-v40: Add Bananapi M2 Berry support   Jagan Teki
• [U-Boot] [ANN] U-Boot v2018.09-rc2 released   Jagan Teki
• [U-Boot] [PATCH] spi: davinci: Full dm conversion   Jagan Teki
• [U-Boot] sunxi: USB gadget does not work on H2+ after 92a30692b2b18f45aae6fdaae38d67ed03dd2d11   Jagan Teki
• [U-Boot] [RFC PATCH v2 3/6] dm: usb: Add UCLASS_USB_DEV_GENERIC shutdown   Jagan Teki
• [U-Boot] sunxi: USB gadget does not work on H2+ after 92a30692b2b18f45aae6fdaae38d67ed03dd2d11   Jagan Teki
• [U-Boot] sunxi: USB gadget does not work on H2+ after 92a30692b2b18f45aae6fdaae38d67ed03dd2d11   Jagan Teki
• [U-Boot] sunxi: USB gadget does not work on H2+ after 92a30692b2b18f45aae6fdaae38d67ed03dd2d11   Jagan Teki
• [U-Boot] sunxi: USB gadget does not work on H2+ after 92a30692b2b18f45aae6fdaae38d67ed03dd2d11   Jagan Teki
• [U-Boot] [linux-sunxi] [PATCH] sunxi: fix sid base address macro name for H6   Jagan Teki
• [U-Boot] [PATCH v3 00/58] clk: Add Allwinner CLK, RESET support   Jagan Teki
• [U-Boot] [PATCH v3 01/58] clk: Add Allwinner A64 CLK driver   Jagan Teki
• [U-Boot] [PATCH v3 02/58] reset: Add default request ops   Jagan Teki
• [U-Boot] [PATCH v3 03/58] reset: Add Allwinner RESET driver   Jagan Teki
• [U-Boot] [PATCH v3 04/58] clk: sunxi: Add Allwinner H3/H5 CLK driver   Jagan Teki
• [U-Boot] [PATCH v3 05/58] clk: sunxi: Add Allwinner A10/A20 CLK driver   Jagan Teki
• [U-Boot] [PATCH v3 06/58] clk: sunxi: Add Allwinner A10s/A13 CLK driver   Jagan Teki
• [U-Boot] [PATCH v3 07/58] clk: sunxi: Add Allwinner A31 CLK driver   Jagan Teki
• [U-Boot] [PATCH v3 08/58] clk: sunxi: Add Allwinner A23 CLK driver   Jagan Teki
• [U-Boot] [PATCH v3 09/58] clk: sunxi: a23: Add CLK support for A33   Jagan Teki
• [U-Boot] [PATCH v3 10/58] clk: sunxi: Add Allwinner A83T CLK driver   Jagan Teki
• [U-Boot] [PATCH v3 11/58] clk: sunxi: Add Allwinner R40 CLK driver   Jagan Teki
• [U-Boot] [PATCH v3 12/58] clk: sunxi: Add Allwinner V3S CLK driver   Jagan Teki
• [U-Boot] [PATCH v3 13/58] sunxi: Enable CLK   Jagan Teki
• [U-Boot] [PATCH v3 14/58] musb-new: sunxi: Use CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH v3 15/58] phy: sun4i-usb: Use CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH v3 16/58] sunxi: usb: Switch to Generic host controllers   Jagan Teki
• [U-Boot] [PATCH v3 17/58] usb: host: Drop [e-o]hci-sunxi drivers   Jagan Teki
• [U-Boot] [PATCH v3 18/58] clk: sunxi: Implement AHB bus MMC clocks   Jagan Teki
• [U-Boot] [PATCH v3 19/58] clk: sunxi: Implement direct MMC clocks   Jagan Teki
• [U-Boot] [PATCH v3 20/58] clk: sunxi: Implement AHB bus MMC resets   Jagan Teki
• [U-Boot] [PATCH v3 21/58] reset: Add get reset by name optionally   Jagan Teki
• [U-Boot] [PATCH v3 22/58] reset: Add reset valid   Jagan Teki
• [U-Boot] [PATCH v3 23/58] clk: sunxi: Add Allwinner H6 CLK, RESET driver   Jagan Teki
• [U-Boot] [PATCH v3 24/58] arm64: allwinner: dts: h6: fix Pine H64 MMC bus width   Jagan Teki
• [U-Boot] [PATCH v3 25/58] sunxi: h6: Enable CLK, RESET   Jagan Teki
• [U-Boot] [PATCH v3 26/58] dm: mmc: sunxi: Add CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH v3 27/58] fastboot: sunxi: Update fastboot mmc default device   Jagan Teki
• [U-Boot] [PATCH v3 28/58] env: fat: Add func to get fat device, partition   Jagan Teki
• [U-Boot] [PATCH v3 29/58] sunxi: Get fat device wrt boot device, 'auto' partition   Jagan Teki
• [U-Boot] [PATCH v3 30/58] env: sunxi: Don't update fat dev, part wrt MMC_SUNXI_SLOT_EXTRA   Jagan Teki
• [U-Boot] [PATCH v3 31/58] sunxi: Add mmc 2, 3 bootenv devices   Jagan Teki
• [U-Boot] [PATCH v3 32/58] sunxi: A20: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH v3 33/58] mmc: sunxi: Add mmc, emmc H5/A64 compatible   Jagan Teki
• [U-Boot] [PATCH v3 34/58] sunxi: H3_H5: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH v3 35/58] sunxi: A64: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH v3 36/58] mmc: sunxi: Add A83T emmc compatible   Jagan Teki
• [U-Boot] [PATCH v3 37/58] sunxi: A83T: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH v3 38/58] sunxi: V40: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH v3 39/58] sunxi: H6: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH v3 40/58] sunxi: A13/A31: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH v3 41/58] sunxi: A23/A33/V3S: Enable DM_MMC   Jagan Teki
• [U-Boot] [PATCH v3 42/58] clk: sunxi: Implement SPI clocks   Jagan Teki
• [U-Boot] [PATCH v3 43/58] clk: sunxi: Implement SPI resets   Jagan Teki
• [U-Boot] [PATCH v3 44/58] spi: sun4i: Add CLK support   Jagan Teki
• [U-Boot] [PATCH v3 45/58] spi: Add Allwinner A31 SPI driver   Jagan Teki
• [U-Boot] [PATCH v3 46/58] clk: sunxi: Implement UART clocks   Jagan Teki
• [U-Boot] [PATCH v3 47/58] clk: sunxi: Implement UART resets   Jagan Teki
• [U-Boot] [PATCH v3 48/58] clk: sunxi: Implement Ethernet clocks   Jagan Teki
• [U-Boot] [PATCH v3 49/58] clk: sunxi: Implement Ethernet resets   Jagan Teki
• [U-Boot] [PATCH v3 50/58] net: sunxi_emac: Add CLK support   Jagan Teki
• [U-Boot] [PATCH v3 51/58] net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle   Jagan Teki
• [U-Boot] [PATCH v3 52/58] net: sun8i_emac: Add CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH v3 53/58] clk: Get the CLK by index without device   Jagan Teki
• [U-Boot] [PATCH v3 54/58] clk: Use clk_get_by_index_tail()   Jagan Teki
• [U-Boot] [PATCH v3 55/58] reset: Get the RESET by index without device   Jagan Teki
• [U-Boot] [PATCH v3 56/58] clk: sunxi: h3: Implement EPHY CLK and RESET   Jagan Teki
• [U-Boot] [PATCH v3 57/58] net: sun8i_emac: Add EPHY CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH v3 58/58] board: sunxi: gmac: Remove Ethernet clock and reset   Jagan Teki
• [U-Boot] [PATCH v3 24/58] arm64: allwinner: dts: h6: fix Pine H64 MMC bus width   Jagan Teki
• [U-Boot] [PATCH v3 45/58] spi: Add Allwinner A31 SPI driver   Jagan Teki
• [U-Boot] [PATCH] configs: sun7i: Fix to use emmc dts for OLinuXino_MICRO-eMMC   Jagan Teki
• [U-Boot] [PATCH] board: sunxi: Remove unused local variables   Jagan Teki
• [U-Boot] [PATCH] board: sunxi: Remove unused local variables   Jagan Teki
• [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
• [U-Boot] [PATCH v3 45/58] spi: Add Allwinner A31 SPI driver   Jagan Teki
• [U-Boot] [PATCH v3.1 14/58] musb-new: sunxi: Use CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH v3.2 14/58] musb-new: sunxi: Use CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH v2 0/6] musb-new: Improve shutdown code   Jagan Teki
• [U-Boot] [PATCH v2 0/6] musb-new: Improve shutdown code   Jagan Teki
• [U-Boot] [PATCH v3 27/58] fastboot: sunxi: Update fastboot mmc default device   Jagan Teki
• [U-Boot] [PATCH v3.2 14/58] musb-new: sunxi: Use CLK and RESET support   Jagan Teki
• [U-Boot] [linux-sunxi] Re: [PATCH v2 0/6] musb-new: Improve shutdown code   Jagan Teki
• [U-Boot] [PATCH v3.3 14/58] musb-new: sunxi: Use CLK and RESET support   Jagan Teki
• [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
• [U-Boot] [PATCH] mtd: spi: Add DM support to SH QSPI driver   Jagan Teki
• [U-Boot] [PATCH v2 0/7] ARM: dts: sunxi: Update dts(i) files from Linux-v4.18-rc3   Jagan Teki
• [U-Boot] [PATCH v4 00/17] clk: Add Allwinner CLK, RESET support   Jagan Teki
• [U-Boot] [PATCH v4 01/17] clk: Add Allwinner A64 CLK driver   Jagan Teki
• [U-Boot] [PATCH v4 02/17] reset: Return 0 if no request ops   Jagan Teki
• [U-Boot] [PATCH v4 03/17] reset: Add Allwinner RESET driver   Jagan Teki
• [U-Boot] [PATCH v4 04/17] clk: sunxi: Add Allwinner H3/H5 CLK driver   Jagan Teki
• [U-Boot] [PATCH v4 05/17] clk: sunxi: Add Allwinner A10/A20 CLK driver   Jagan Teki
• [U-Boot] [PATCH v4 06/17] clk: sunxi: Add Allwinner A10s/A13 CLK driver   Jagan Teki
• [U-Boot] [PATCH v4 07/17] clk: sunxi: Add Allwinner A31 CLK driver   Jagan Teki
• [U-Boot] [PATCH v4 08/17] clk: sunxi: Add Allwinner A23 CLK driver   Jagan Teki
• [U-Boot] [PATCH v4 09/17] clk: sunxi: a23: Add CLK support for A33   Jagan Teki
• [U-Boot] [PATCH v4 10/17] clk: sunxi: Add Allwinner A83T CLK driver   Jagan Teki
• [U-Boot] [PATCH v4 11/17] clk: sunxi: Add Allwinner R40 CLK driver   Jagan Teki
• [U-Boot] [PATCH v4 12/17] clk: sunxi: Add Allwinner V3S CLK driver   Jagan Teki
• [U-Boot] [PATCH v4 13/17] sunxi: Enable CLK   Jagan Teki
• [U-Boot] [PATCH v4 14/17] phy: sun4i-usb: Use CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH v4 15/17] musb-new: sunxi: Use CLK and RESET support   Jagan Teki
• [U-Boot] [PATCH v4 16/17] sunxi: usb: Switch to Generic host controllers   Jagan Teki
• [U-Boot] [PATCH v4 17/17] usb: host: Drop [e-o]hci-sunxi drivers   Jagan Teki
• [U-Boot] [PATCH v3 27/58] fastboot: sunxi: Update fastboot mmc default device   Jagan Teki
• [U-Boot] [PATCH v3 19/58] clk: sunxi: Implement direct MMC clocks   Jagan Teki
• [U-Boot] [PATCH v3 19/58] clk: sunxi: Implement direct MMC clocks   Jagan Teki
• [U-Boot] [PATCH] doc: FIT image: fix typo   Pierre-Jean Texier
• [U-Boot] [PATCH] FSL PCI: Configure PCIe reference ratio   Joakim Tjernlund
• [U-Boot] [PATCH 1/9] dm: allow 4GB of DRAM on 32bit systems   Dr. Philipp Tomsich
• [U-Boot] [PATCH] spl: fix debug print in spl_common_init()   Dr. Philipp Tomsich
• [U-Boot] [PATCH] kconfig: fix typo 'parition'   Dr. Philipp Tomsich
• [U-Boot] [PATCH 3/3] bootcount: add DM-based backing store for bootcount   Dr. Philipp Tomsich
• [U-Boot] [PATCH 1/3] rtc: rv3029: add to Kconfig   Dr. Philipp Tomsich
• [U-Boot] [PATCH v2] kconfig: fix typo 'parition'   Dr. Philipp Tomsich
• [U-Boot] [PATCH 3/3] bootcount: add DM-based backing store for bootcount   Dr. Philipp Tomsich
• [U-Boot] [PATCH 3/3] bootcount: add DM-based backing store for bootcount   Dr. Philipp Tomsich
• [U-Boot] [PATCH 11/25] clk: Allow clock defaults to be set also during re-reloc state   Dr. Philipp Tomsich
• [U-Boot] [PATCH 11/25] clk: Allow clock defaults to be set also during re-reloc state   Dr. Philipp Tomsich
• [U-Boot] [PATCH] rockchip: dts: fix unnecessary '-cells' warning   Dr. Philipp Tomsich
• [U-Boot] [U-Boot, 01/10] rockchip: enable DEBUG_UART_BOARD_INIT by default   Dr. Philipp Tomsich
• [U-Boot] [PATCH] rockchip: add TPL_TINY_FRAMEWORK support   Dr. Philipp Tomsich
• [U-Boot] [PATCH 0/3] Update RV3029 driver to DM and add DM-backed bootcount support   Philipp Tomsich
• [U-Boot] [PATCH 1/3] rtc: rv3029: add to Kconfig   Philipp Tomsich
• [U-Boot] [PATCH 2/3] rtc: rv3029: update to support DM and sync with Linux 4.17   Philipp Tomsich
• [U-Boot] [PATCH 3/3] bootcount: add DM-based backing store for bootcount   Philipp Tomsich
• [U-Boot] [U-Boot, 01/10] rockchip: enable DEBUG_UART_BOARD_INIT by default   Philipp Tomsich
• [U-Boot] [U-Boot,02/10] rockchip; kylin-rk3036: enabl DEBUG UART   Philipp Tomsich
• [U-Boot] [U-Boot, 03/10] rockchip: rk3036: add board_debug_uart_init()   Philipp Tomsich
• [U-Boot] [U-Boot, 04/10] rockchip: rk3188: add board_debug_uart_init()   Philipp Tomsich
• [U-Boot] [U-Boot, 05/10] rockchip: rk322x: move board_debug_uart_init() to rk322x.c   Philipp Tomsich
• [U-Boot] [U-Boot, 06/10] rockchip: rk3288: use grf structure to access soc_con2   Philipp Tomsich
• [U-Boot] [U-Boot, 07/10] rockchip: rk3288: add board_debug_uart_init()   Philipp Tomsich
• [U-Boot] [U-Boot, 08/10] rockchip: rk3368: move board_debug_uart_init() to rk3368.c   Philipp Tomsich
• [U-Boot] [U-Boot, 09/10] rockchip: rk3399: use grf structure to access reg   Philipp Tomsich
• [U-Boot] [U-Boot, 10/10] rockchip: rk3399: add board_debug_uart_init()   Philipp Tomsich
• [U-Boot] [U-Boot, 01/10] rockchip: enable DEBUG_UART_BOARD_INIT by default   Philipp Tomsich
• [U-Boot] [U-Boot,02/10] rockchip; kylin-rk3036: enabl DEBUG UART   Philipp Tomsich
• [U-Boot] [U-Boot, 03/10] rockchip: rk3036: add board_debug_uart_init()   Philipp Tomsich
• [U-Boot] [U-Boot, 04/10] rockchip: rk3188: add board_debug_uart_init()   Philipp Tomsich
• [U-Boot] [U-Boot, 05/10] rockchip: rk322x: move board_debug_uart_init() to rk322x.c   Philipp Tomsich
• [U-Boot] [U-Boot, 06/10] rockchip: rk3288: use grf structure to access soc_con2   Philipp Tomsich
• [U-Boot] [U-Boot, 08/10] rockchip: rk3368: move board_debug_uart_init() to rk3368.c   Philipp Tomsich
• [U-Boot] [U-Boot, 09/10] rockchip: rk3399: use grf structure to access reg   Philipp Tomsich
• [U-Boot] [U-Boot, 10/10] rockchip: rk3399: add board_debug_uart_init()   Philipp Tomsich
• [U-Boot] rockchip: dts: fix unnecessary '-cells' warning   Philipp Tomsich
• [U-Boot] rockchip: dts: fix unnecessary '-cells' warning   Philipp Tomsich
• [U-Boot] [U-Boot, v5, 1/2] spl: add support to booting with OP-TEE   Philipp Tomsich
• [U-Boot] [U-Boot, 2/8] rockchip: rk322x: sdram: use udelay instead of rockchip_udelay   Philipp Tomsich
• [U-Boot] [U-Boot, 4/8] rockchip: rk3036: sdram: use udelay instead of rockchip_udelay   Philipp Tomsich
• [U-Boot] [U-Boot, 7/8] rockchip: rk3128: use ARM arch timer instead of rk_timer   Philipp Tomsich
• [U-Boot] [U-Boot,8/8] rockchip: remove unused rk_timer.c   Philipp Tomsich
• [U-Boot] [U-Boot, 1/8] rockchip: add STIMER_BASE for Rockchip SoCs   Philipp Tomsich
• [U-Boot] [U-Boot, 3/8] rockchip: rk322x: use ARM arch timer instead of rk_timer   Philipp Tomsich
• [U-Boot] [U-Boot, 5/8] rockchip: rk3036: use ARM arch timer instead of rk_timer   Philipp Tomsich
• [U-Boot] [U-Boot, 6/8] rockchip: rk3288: use ARM arch timer instead of rk_timer   Philipp Tomsich
• [U-Boot] Problem booting uImage with u-boot   Michael Nazzareno Trimarchi
• [U-Boot] Problem booting uImage with u-boot   Michael Nazzareno Trimarchi
• [U-Boot] Pull request: u-boot-sunxi/master   Chen-Yu Tsai
• [U-Boot] Pull request: u-boot-sunxi/master   Chen-Yu Tsai
• [U-Boot] [PATCH 0/7] ARM: dts: sunxi: Update dts(i) files from   Chen-Yu Tsai
• [U-Boot] [linux-sunxi] [PATCH] sunxi: A64: fix default DRAM_ODT_EN symbol   Chen-Yu Tsai
• [U-Boot] [PATCH v2 0/6] musb-new: Improve shutdown code   Chen-Yu Tsai
• [U-Boot] [linux-sunxi] Re: [PATCH v2 0/6] musb-new: Improve shutdown code   Chen-Yu Tsai
• [U-Boot] [PATCH v6 8/8] armv8: ls1046a: setup SEC ICIDs and fix up device tree   Laurentiu Tudor
• [U-Boot] [PATCH v6 8/8] armv8: ls1046a: setup SEC ICIDs and fix up device tree   Laurentiu Tudor
• [U-Boot] [PATCH v7 0/8] NXP LS1046A SMMU enabling patches   Laurentiu Tudor
• [U-Boot] bootelf and 64 bit elf application   Siddharth Tuli
• [U-Boot] bootelf and 64 bit elf application   Siddharth Tuli
• [U-Boot] [PATCH] i2c: Drop CONFIG_SYS_I2C_MXS   Tuomas Tynkkynen
• [U-Boot] [RFC 1/3] test/py: convert fs-test.sh to pytest   Tuomas Tynkkynen
• [U-Boot] [PATCH 2/5] arm: socfpga: fix device trees to work with DM serial   Emmanuel Vadot
• [U-Boot] [UBOOT PATCH 0/2] dm: core: Scan "/firmware" node by default   Rajan Vaja
• [U-Boot] [UBOOT PATCH 1/2] dm: core: Move "/clock" node scan into function   Rajan Vaja
• [U-Boot] [UBOOT PATCH 2/2] dm: core: Scan "/firmware" node by default   Rajan Vaja
• [U-Boot] [PATCH] ARM: socfpga: Convert to DM serial   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Convert to DM serial   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Convert to DM serial   Marek Vasut
• [U-Boot] [PATCH] Convert CONFIG_USB_ULPI_TIMEOUT to Kconfig   Marek Vasut
• [U-Boot] [PATCH V2] Convert CONFIG_USB_ULPI_TIMEOUT to Kconfig   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Convert to DM serial   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Convert to DM serial   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Convert to DM serial   Marek Vasut
• [U-Boot] [PATCH 1/5] arm: socfpga: fix SPL on gen5 after moving to DM serial   Marek Vasut
• [U-Boot] [PATCH 2/5] arm: socfpga: fix device trees to work with DM serial   Marek Vasut
• [U-Boot] [PATCH 3/5] arm: socfpga: cyclone5: handle debug uart   Marek Vasut
• [U-Boot] [PATCH 4/5] board_init.c: fix simple malloc by storing malloc_limit   Marek Vasut
• [U-Boot] [PATCH 5/5] malloc_simple: calloc: don't call memset if malloc failed   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI   Marek Vasut
• [U-Boot] [PATCH] [RFC] blk: Increase cache element size   Marek Vasut
• [U-Boot] [PATCH] usb: ehci: Make the PHY handling generic   Marek Vasut
• [U-Boot] [PATCH] phy: Fix off-by-one error when parsing DT PHY bindings   Marek Vasut
• [U-Boot] [PATCH] usb: ehci: Add PHY support to ehci-pci   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] phy: rcar: Add R-Car Gen2 PHY driver   Marek Vasut
• [U-Boot] [PATCH] usb: ehci-generic: Add vbus-supply regulator support   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [RFC][PATCH] cmd: clk: Add trivial implementation of clock dump for DM   Marek Vasut
• [U-Boot] [PATCH 1/3] ARM: socfpga: clk: Obtain handoff base clock via DM   Marek Vasut
• [U-Boot] [PATCH 2/3] ARM: socfpga: clk: Make L4SP and MMC clock calculation Gen5 only   Marek Vasut
• [U-Boot] [PATCH 3/3] ARM: socfpga: clk: Drop unused variables on Arria10   Marek Vasut
• [U-Boot] [PATCH] ARM: dts: socfpga: Add u-boot, dm-pre-reloc to necessary clock nodes   Marek Vasut
• [U-Boot] [PATCH] mmc: socfpga: Add clock framework support   Marek Vasut
• [U-Boot] [PATCH] clk: socfpga: Add initial Arria10 clock driver   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [RESEND PATCH] usb: dwc3: convert to livetree   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] phy: Fix off-by-one error when parsing DT PHY bindings   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH V3 1/2] mmc: add HS400 support   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH v2] usb: ehci-generic: Add vbus-supply regulator support   Marek Vasut
• [U-Boot] [PATCH] ARM: dts: socfpga: Add u-boot, dm-pre-reloc to necessary clock nodes   Marek Vasut
• [U-Boot] [PATCH 1/3] ARM: socfpga: clk: Obtain handoff base clock via DM   Marek Vasut
• [U-Boot] [PATCH 1/3] ARM: socfpga: clk: Obtain handoff base clock via DM   Marek Vasut
• [U-Boot] [PATCH V2 1/3] ARM: socfpga: clk: Obtain handoff base clock via DM   Marek Vasut
• [U-Boot] [PATCH V2 2/3] ARM: socfpga: clk: Make L4SP and MMC clock calculation Gen5 only   Marek Vasut
• [U-Boot] [PATCH V2 3/3] ARM: socfpga: clk: Drop unused variables on Arria10   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH v2] usb: ehci-generic: Add vbus-supply regulator support   Marek Vasut
• [U-Boot] [PATCH v3] usb: ehci-generic: Add vbus-supply regulator support   Marek Vasut
• [U-Boot] [PATCH 1/6] arm: socfpga: fix SPL on gen5 after moving to DM serial   Marek Vasut
• [U-Boot] [PATCH 2/6] arm: socfpga: fix device trees to work with DM serial   Marek Vasut
• [U-Boot] [PATCH 3/6] arm: socfpga: spl_gen5: clean up malloc_base assignment   Marek Vasut
• [U-Boot] [PATCH 5/6] serial: ns16550: fix debug uart putc called before init   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI   Marek Vasut
• [U-Boot] [PATCH 5/6] serial: ns16550: fix debug uart putc called before init   Marek Vasut
• [U-Boot] [PATCH 5/6] serial: ns16550: fix debug uart putc called before init   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH 5/6] serial: ns16550: fix debug uart putc called before init   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH 1/6] arm: socfpga: fix SPL on gen5 after moving to DM serial   Marek Vasut
• [U-Boot] [PATCH 1/6] arm: socfpga: fix SPL on gen5 after moving to DM serial   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: make socfpga_socrates_defconfig boot from QSPI   Marek Vasut
• [U-Boot] [PATCH v3 5/8] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH v3 6/8] arm: socfpga: gen5: combine some init code for SPL and U-Boot   Marek Vasut
• [U-Boot] [PATCH v3 7/8] arm: socfpga: fix SPL booting from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH v3 0/8] Get socfpga gen5 SPL working again.   Marek Vasut
• [U-Boot] [PATCH v3 2/8] arm: socfpga: fix device trees to work with DM serial   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH v3 2/8] arm: socfpga: fix device trees to work with DM serial   Marek Vasut
• [U-Boot] [PATCH v3 5/8] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH v3 7/8] arm: socfpga: fix SPL booting from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH 1/5] ARM: dts: socfpga: Flag reset manager on A10 as pre-reloc   Marek Vasut
• [U-Boot] [PATCH 2/5] ARM: dts: socfpga: Add missing UART resets   Marek Vasut
• [U-Boot] [PATCH 3/5] ARM: dts: socfpga: Fix Arria10 GMAC resets   Marek Vasut
• [U-Boot] [PATCH 4/5] ARM: dts: socfpga: Add missing I2C resets   Marek Vasut
• [U-Boot] [PATCH 5/5] ARM: dts: socfpga: Add i2c alias to A10 SoCDK   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Enable DM reset framework on A10   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Enable DM I2C framework on A10   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Zap all the UART handling complexity   Marek Vasut
• [U-Boot] [PATCH 1/3] net: designware: socfpga: Add Arria10 extras   Marek Vasut
• [U-Boot] [PATCH 2/3] ARM: socfpga: Zap unused reset code   Marek Vasut
• [U-Boot] [PATCH 3/3] ARM: socfpga: Remove adhoc ethernet reset and configuration   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Enable DM ethernet on A10   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Register the FPGA on A10 in SPL again   Marek Vasut
• [U-Boot] [PATCH v4 2/5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH v4 4/5] arm: socfpga: fix SPL booting from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH v4 5/5] malloc_simple: calloc: don't call memset if malloc failed   Marek Vasut
• [U-Boot] [PATCH] Kconfig: Migrate CONFIG_NR_DRAM_BANKS   Marek Vasut
• [U-Boot] [PATCH] Kconfig: Migrate CONFIG_NR_DRAM_BANKS   Marek Vasut
• [U-Boot] [PATCH v4 2/5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH V2] spl: Weed out CONFIG_SYS_TEXT_BASE usage   Marek Vasut
• [U-Boot] [PATCH V2] spl: Weed out CONFIG_SYS_TEXT_BASE usage   Marek Vasut
• [U-Boot] [PATCH V2] spl: Weed out CONFIG_SYS_TEXT_BASE usage   Marek Vasut
• [U-Boot] [GIT] Pull request: u-boot-dfu (14.08.2018)   Marek Vasut
• [U-Boot] [PATCH V2] spl: Weed out CONFIG_SYS_TEXT_BASE usage   Marek Vasut
• [U-Boot] [PATCH V2] spl: Weed out CONFIG_SYS_TEXT_BASE usage   Marek Vasut
• [U-Boot] [PATCH v4 2/5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH v4 4/5] arm: socfpga: fix SPL booting from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] gpio: dwapb_gpio: Add reset ctrl to driver   Marek Vasut
• [U-Boot] [PATCH] gpio: dwapb_gpio: Change to use dev_read_addr()   Marek Vasut
• [U-Boot] [PATCH] gpio: dwapb_gpio: Enable get_function support   Marek Vasut
• [U-Boot] [PATCH] arm: dts: socfpga: stratix10: Move reset manager node to top   Marek Vasut
• [U-Boot] [PATCH] usb: dwc2: Add reset ctrl to driver   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Fix SYSMGR_FPGAINTF_EMACx bit mask   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] arm: dts: socfpga: stratix10: Move reset manager node to top   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Fix SYSMGR_FPGAINTF_EMACx bit mask   Marek Vasut
• [U-Boot] [PATCH] [RFC] blk: Increase cache element size   Marek Vasut
• [U-Boot] [PATCH] [RFC] blk: Increase cache element size   Marek Vasut
• [U-Boot] [PATCH v4 4/5] arm: socfpga: fix SPL booting from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH v2] usb: dwc2: Add reset ctrl to driver   Marek Vasut
• [U-Boot] [PATCH v4 4/5] arm: socfpga: fix SPL booting from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH v2] gpio: dwapb_gpio: Add reset ctrl to driver   Marek Vasut
• [U-Boot] [PATCH v2] gpio: dwapb_gpio: Add reset ctrl to driver   Marek Vasut
• [U-Boot] [PATCH v2] usb: dwc2: Add reset ctrl to driver   Marek Vasut
• [U-Boot] [PATCH v2] gpio: dwapb_gpio: Add reset ctrl to driver   Marek Vasut
• [U-Boot] [PATCH v2] usb: dwc2: Add reset ctrl to driver   Marek Vasut
• [U-Boot] [PATCH v5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH] [RFC] blk: Increase cache element size   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH v5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH v5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH v5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH v5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH v5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: stratix10: Enable EMAC to FPGA bridge based on handoff   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: stratix10: Fix mailbox urgent command with urgent register   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PATCH] [RFC] blk: Increase cache element size   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] Convert CONFIG_BOARD_LATE_INIT to Kconfig   Marek Vasut
• [U-Boot] [PATCH v5] arm: socfpga: fix U-Boot running from fpga OnChip RAM   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Reorder Arria10 SPL   Marek Vasut
• [U-Boot] [PATCH 1/3] timer: dw-apb: Add Designware APB timer driver   Marek Vasut
• [U-Boot] [PATCH 2/3] ARM: dts: socfpga: Flag timer clock as pre-reloc   Marek Vasut
• [U-Boot] [PATCH 3/3] ARM: socfpga: Convert Arria10 to timer framework   Marek Vasut
• [U-Boot] Ordering PCI device probes   Marek Vasut
• [U-Boot] [U-Boot,v2] Convert CONFIG_BOARD_LATE_INIT to Kconfig   Marek Vasut
• [U-Boot] [PATCH 6/8] net: ravb: Fix "left shift in type int" undefined behavior   Marek Vasut
• [U-Boot] [PATCH 4/8] pinctrl: renesas: Fix "left shift in type int" undefined behavior   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [U-Boot,v2] Convert CONFIG_BOARD_LATE_INIT to Kconfig   Marek Vasut
• [U-Boot] [PATCH 2/2] spl: socfpga: stratix10: add hex file output for spl image   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH 2/2] spl: socfpga: stratix10: add hex file output for spl image   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] env: ubi: Add missing ENV_NAME   Marek Vasut
• [U-Boot] [PATCH] ARM: dts: socfpga: Add missing NAND reset   Marek Vasut
• [U-Boot] [PATCH] mtd: nand: denali_dt: Add reset support   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Fix Arria10 SPI and NAND U-Boot offset   Marek Vasut
• [U-Boot] [PATCH] ARM: dts: socfpga: Drop ad-hoc UART clock frequency encoding from DT   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH] mtd: nand: denali_dt: Add reset support   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCH V2 1/2] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH V2 2/2] pci: Update documentation to make 'compatible' string optional   Marek Vasut
• [U-Boot] [PATCH] pci: rmobile: Filter out device 1 and 2   Marek Vasut
• [U-Boot] [PATCH] usb: ohci: Add OHCI PCI driver   Marek Vasut
• [U-Boot] [PATCH] mtd: spi: Add DM support to SH QSPI driver   Marek Vasut
• [U-Boot] [PATCH] mtd: spi: Add DM support to SH QSPI driver   Marek Vasut
• [U-Boot] [PATCH v2 06/13] net: ravb: Fix signed shift overflow   Marek Vasut
• [U-Boot] [PATCH 2/2] spl: socfpga: stratix10: add hex file output for spl image   Marek Vasut
• [U-Boot] [PATCH 2/2] spl: socfpga: stratix10: add hex file output for spl image   Marek Vasut
• [U-Boot] [PATCH v2 06/13] net: ravb: Fix signed shift overflow   Marek Vasut
• [U-Boot] [PATCH v3 1/2] gpio: Add struct reset_ctl_bulk   Marek Vasut
• [U-Boot] [PATCH v3 2/2] gpio: dwapb_gpio: Add reset ctrl to driver   Marek Vasut
• [U-Boot] [PATCH v3] usb: dwc2: Add reset ctrl to driver   Marek Vasut
• [U-Boot] [PATCH 2/2] spl: socfpga: stratix10: add hex file output for spl image   Marek Vasut
• [U-Boot] [PATCH v3] usb: dwc2: Add reset ctrl to driver   Marek Vasut
• [U-Boot] [PATCH v3 1/2] gpio: Add struct reset_ctl_bulk   Marek Vasut
• [U-Boot] [PATCH V4 1/2] mmc: add HS400 support   Marek Vasut
• [U-Boot] [PATCH v4] gpio: dwapb_gpio: Add reset ctrl to driver   Marek Vasut
• [U-Boot] [PATCH V2 1/2] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH V2 1/2] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH v4] gpio: dwapb_gpio: Add reset ctrl to driver   Marek Vasut
• [U-Boot] [PATCH] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PATCH V2 2/2] pci: Update documentation to make 'compatible' string optional   Marek Vasut
• [U-Boot] [PATCH] mmc: renesas-sdhi: Use priv directly   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH 01/11] sh: sh7723: ap325rxa: Drop duplicate HIZCRB macro   Marek Vasut
• [U-Boot] [PATCH 02/11] sh: sh7724: Drop EDMR macro   Marek Vasut
• [U-Boot] [PATCH 03/11] sh: tmu: Clean up CONFIG_SYS_TMU_CLK_DIV   Marek Vasut
• [U-Boot] [PATCH 04/11] sh: tmu: Simplify the tmu_bit math   Marek Vasut
• [U-Boot] [PATCH 05/11] sh: tmu: Inline tmu_timer_{start,stop}()   Marek Vasut
• [U-Boot] [PATCH 06/11] sh: tmu: Inline get_tmu0_clk_rate()   Marek Vasut
• [U-Boot] [PATCH 07/11] sh: tmu: Clean up CONFIG_SH_TMU_CLK_FREQ   Marek Vasut
• [U-Boot] [PATCH 08/11] sh: tmu: Inline sh_tmu.h   Marek Vasut
• [U-Boot] [PATCH 09/11] sh: tmu: Clean up register usage   Marek Vasut
• [U-Boot] [PATCH 10/11] sh: tmu: Zap get_tbclk and timer_read_counter   Marek Vasut
• [U-Boot] [PATCH 11/11] ARM: rmobile: Repair TMU clock on Gen2   Marek Vasut
• [U-Boot] [PATCH V2 1/2] pci: Support parsing PCI controller DT subnodes   Marek Vasut
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PATCH 1/2] spi: add support for ARM PL022 SPI controller   Armando Visconti
• [U-Boot] [PATCH] serial: omap: Introduce DM specific omap serial   Lokesh Vutla
• [U-Boot] [PATCH 0/4] dm: omap-timer: Make timer driver SoC independent   Lokesh Vutla
• [U-Boot] [PATCH 1/4] arm: omap4+: Move SCLK to include/configs   Lokesh Vutla
• [U-Boot] [PATCH 2/4] dm: omap-timer: Do not include asm/arch/clock.h   Lokesh Vutla
• [U-Boot] [PATCH 3/4] dm: omap-timer: Use 64bit for counter values   Lokesh Vutla
• [U-Boot] [PATCH 4/4] dm: omap-timer: Update clock rate only if not populated   Lokesh Vutla
• [U-Boot] [PATCH] pinctrl: Fix build warning with ARM64   Lokesh Vutla
• [U-Boot] [PATCH] serial: arm_dcc: Add DCC support for V7R based cores   Lokesh Vutla
• [U-Boot] [PATCH 1/4] arm: omap4+: Move SCLK to include/configs   Lokesh Vutla
• [U-Boot] [PATCH 0/8] [1/3] Initial support Texas Instrument's AM654 Platform   Lokesh Vutla
• [U-Boot] [PATCH 1/8] arm: K3: Add initial support for TI's K3 generation of SoCs   Lokesh Vutla
• [U-Boot] [PATCH 2/8] arm: K3: Add support for AM654 SoC definition   Lokesh Vutla
• [U-Boot] [PATCH 3/8] arm: K3: Update _start instruction   Lokesh Vutla
• [U-Boot] [PATCH 4/8] arm: K3: am654: Add support for boot device detection   Lokesh Vutla
• [U-Boot] [PATCH 5/8] arm: K3: am654: Unlock control module registers during init   Lokesh Vutla
• [U-Boot] [PATCH 6/8] armv8: K3: am654: Add custom MMU support   Lokesh Vutla
• [U-Boot] [PATCH 7/8] armv8: K3: am654: Introduce FIT generator script   Lokesh Vutla
• [U-Boot] [PATCH 8/8] armv8: K3: am654: Add support for generating build targets   Lokesh Vutla
• [U-Boot] [PATCH 00/25] [2/3] Initial support Texas Instrument's AM654 Platform   Lokesh Vutla
• [U-Boot] [PATCH 01/25] firmware: Add basic support for TI System Control Interface (TI SCI) protocol   Lokesh Vutla
• [U-Boot] [PATCH 02/25] firmware: ti_sci: Add support for board configuration   Lokesh Vutla
• [U-Boot] [PATCH 03/25] firmware: ti_sci: Add support for device control   Lokesh Vutla
• [U-Boot] [PATCH 04/25] firmware: ti_sci: Add support for clock control   Lokesh Vutla
• [U-Boot] [PATCH 05/25] firmware: ti_sci: Add support for reboot core service   Lokesh Vutla
• [U-Boot] [PATCH 06/25] firmware: ti_sci: Add support for processor control services   Lokesh Vutla
• [U-Boot] [PATCH 07/25] dm: firmware: Automatically bind child devices   Lokesh Vutla
• [U-Boot] [PATCH 08/25] dm: reset: Update uclass to allow querying reset status   Lokesh Vutla
• [U-Boot] [PATCH 09/25] reset: Extend reset control with an optional data field   Lokesh Vutla
• [U-Boot] [PATCH 10/25] reset: Introduce TI System Control Interface (TI SCI) reset driver   Lokesh Vutla
• [U-Boot] [PATCH 11/25] clk: Allow clock defaults to be set also during re-reloc state   Lokesh Vutla
• [U-Boot] [PATCH 12/25] clk: Extend clock control with an optional data field   Lokesh Vutla
• [U-Boot] [PATCH 13/25] clk: Introduce TI System Control Interface (TI SCI) clock driver   Lokesh Vutla
• [U-Boot] [PATCH 14/25] power domain: Add support for multiple powerdomains per device   Lokesh Vutla
• [U-Boot] [PATCH 15/25] power domain: Introduce TI System Control Interface (TI SCI) power domain driver   Lokesh Vutla
• [U-Boot] [PATCH 16/25] sysreset: Add TI System Control Interface (TI SCI) sysreset driver   Lokesh Vutla
• [U-Boot] [PATCH 17/25] mailbox: Allow attaching private data for mbox_chan   Lokesh Vutla
• [U-Boot] [PATCH 18/25] mailbox: Introduce K3 Secure Proxy Driver   Lokesh Vutla
• [U-Boot] [PATCH 19/25] spl: Allow mailbox drivers to be used within SPL   Lokesh Vutla
• [U-Boot] [PATCH 20/25] remoteproc: Allow for individual remoteproc initialization   Lokesh Vutla
• [U-Boot] [PATCH 21/25] remoteproc: Introduce K3 system controller   Lokesh Vutla
• [U-Boot] [PATCH 22/25] remoteproc: Introduce K3 remoteproc driver   Lokesh Vutla
• [U-Boot] [PATCH 23/25] spl: Allow remoteproc drivers to be used within SPL   Lokesh Vutla
• [U-Boot] [PATCH 24/25] mmc: k3_arasan: Add sdhci driver support for K3 family SoCs   Lokesh Vutla
• [U-Boot] [PATCH 25/25] gpio: do not include <asm/arch/gpio.h> for ARCH_K3   Lokesh Vutla
• [U-Boot] [PATCH 0/6] [3/3] Initial support Texas Instrument's AM654 Platform   Lokesh Vutla
• [U-Boot] [PATCH 1/6] board: ti: am654: a53: Add initial support for am654   Lokesh Vutla
• [U-Boot] [PATCH 2/6] board: ti: am65x: Add README   Lokesh Vutla
• [U-Boot] [PATCH 3/6] include: am654_evm: Establish initial environment for SD card boot   Lokesh Vutla
• [U-Boot] [PATCH 4/6] arm64: dts: k3: Add Support for AM654 SoC   Lokesh Vutla
• [U-Boot] [PATCH 5/6] arm64: dts: k3: Add u-boot specific nodes   Lokesh Vutla
• [U-Boot] [PATCH 6/6] configs: am65x_evm_a53: Add initial support   Lokesh Vutla
• [U-Boot] [PATCH 14/25] power domain: Add support for multiple powerdomains per device   Lokesh Vutla
• [U-Boot] [PATCH 1/8] arm: K3: Add initial support for TI's K3 generation of SoCs   Lokesh Vutla
• [U-Boot] [PATCH 2/8] arm: K3: Add support for AM654 SoC definition   Lokesh Vutla
• [U-Boot] [PATCH 4/8] arm: K3: am654: Add support for boot device detection   Lokesh Vutla
• [U-Boot] [PATCH 7/8] armv8: K3: am654: Introduce FIT generator script   Lokesh Vutla
• [U-Boot] [PATCH 01/25] firmware: Add basic support for TI System Control Interface (TI SCI) protocol   Lokesh Vutla
• [U-Boot] [PATCH 21/25] remoteproc: Introduce K3 system controller   Lokesh Vutla
• [U-Boot] [PATCH 1/8] arm: K3: Add initial support for TI's K3 generation of SoCs   Lokesh Vutla
• [U-Boot] [PATCH 11/25] clk: Allow clock defaults to be set also during re-reloc state   Lokesh Vutla
• [U-Boot] [PATCH 0/8] [1/3] Initial support Texas Instrument's AM654 Platform   Lokesh Vutla
• [U-Boot] [PATCH v2] serial: omap: Introduce DM specific omap serial   Lokesh Vutla
• [U-Boot] [PATCH 0/8] [1/3] Initial support Texas Instrument's AM654 Platform   Lokesh Vutla
• [U-Boot] [PATCH v2] serial: omap: Introduce DM specific omap serial   Lokesh Vutla
• [U-Boot] [PATCH v3] serial: omap: Introduce DM specific omap serial   Lokesh Vutla
• [U-Boot] [PATCH v2 0/8] [1/3] Initial support Texas Instrument's AM654 Platform   Lokesh Vutla
• [U-Boot] [PATCH v2 1/8] arm: K3: Add initial support for TI's K3 generation of SoCs   Lokesh Vutla
• [U-Boot] [PATCH v2 2/8] arm: K3: Add support for AM654 SoC definition   Lokesh Vutla
• [U-Boot] [PATCH v2 3/8] arm: K3: Update _start instruction   Lokesh Vutla
• [U-Boot] [PATCH v2 4/8] arm: K3: am654: Add support for boot device detection   Lokesh Vutla
• [U-Boot] [PATCH v2 5/8] arm: K3: am654: Unlock control module registers during init   Lokesh Vutla
• [U-Boot] [PATCH v2 6/8] armv8: K3: am654: Add custom MMU support   Lokesh Vutla
• [U-Boot] [PATCH v2 7/8] armv8: K3: am654: Introduce FIT generator script   Lokesh Vutla
• [U-Boot] [PATCH v2 8/8] armv8: K3: am654: Add support for generating build targets   Lokesh Vutla
• [U-Boot] [PATCH v2 00/24] [2/3] Initial support Texas Instrument's AM654 Platform   Lokesh Vutla
• [U-Boot] [PATCH v2 01/24] firmware: Add basic support for TI System Control Interface (TI SCI) protocol   Lokesh Vutla
• [U-Boot] [PATCH v2 02/24] firmware: ti_sci: Add support for board configuration   Lokesh Vutla
• [U-Boot] [PATCH v2 03/24] firmware: ti_sci: Add support for device control   Lokesh Vutla
• [U-Boot] [PATCH v2 04/24] firmware: ti_sci: Add support for clock control   Lokesh Vutla
• [U-Boot] [PATCH v2 05/24] firmware: ti_sci: Add support for reboot core service   Lokesh Vutla
• [U-Boot] [PATCH v2 06/24] firmware: ti_sci: Add support for processor control services   Lokesh Vutla
• [U-Boot] [PATCH v2 07/24] dm: firmware: Automatically bind child devices   Lokesh Vutla
• [U-Boot] [PATCH v2 08/24] dm: reset: Update uclass to allow querying reset status   Lokesh Vutla
• [U-Boot] [PATCH v2 09/24] reset: Extend reset control with an optional data field   Lokesh Vutla
• [U-Boot] [PATCH v2 10/24] reset: Introduce TI System Control Interface (TI SCI) reset driver   Lokesh Vutla
• [U-Boot] [PATCH v2 11/24] clk: Extend clock control with an optional data field   Lokesh Vutla
• [U-Boot] [PATCH v2 12/24] clk: Introduce TI System Control Interface (TI SCI) clock driver   Lokesh Vutla
• [U-Boot] [PATCH v2 13/24] power domain: Add support for multiple powerdomains per device   Lokesh Vutla
• [U-Boot] [PATCH v2 14/24] power domain: Introduce TI System Control Interface (TI SCI) power domain driver   Lokesh Vutla
• [U-Boot] [PATCH v2 15/24] sysreset: Add TI System Control Interface (TI SCI) sysreset driver   Lokesh Vutla
• [U-Boot] [PATCH v2 16/24] mailbox: Allow attaching private data for mbox_chan   Lokesh Vutla
• [U-Boot] [PATCH v2 17/24] mailbox: Introduce K3 Secure Proxy Driver   Lokesh Vutla
• [U-Boot] [PATCH v2 18/24] spl: Allow mailbox drivers to be used within SPL   Lokesh Vutla
• [U-Boot] [PATCH v2 19/24] remoteproc: Allow for individual remoteproc initialization   Lokesh Vutla
• [U-Boot] [PATCH v2 20/24] remoteproc: Introduce K3 system controller   Lokesh Vutla
• [U-Boot] [PATCH v2 21/24] remoteproc: Introduce K3 remoteproc driver   Lokesh Vutla
• [U-Boot] [PATCH v2 22/24] spl: Allow remoteproc drivers to be used within SPL   Lokesh Vutla
• [U-Boot] [PATCH v2 23/24] mmc: k3_arasan: Add sdhci driver support for K3 family SoCs   Lokesh Vutla
• [U-Boot] [PATCH v2 24/24] gpio: do not include <asm/arch/gpio.h> for ARCH_K3   Lokesh Vutla
• [U-Boot] [PATCH v2 0/5] [3/3] Initial support Texas Instrument's AM654 Platform   Lokesh Vutla
• [U-Boot] [PATCH v2 1/5] board: ti: am654: a53: Add initial support for am654   Lokesh Vutla
• [U-Boot] [PATCH v2 2/5] include: am654_evm: Establish initial environment for SD card boot   Lokesh Vutla
• [U-Boot] [PATCH v2 3/5] arm64: dts: k3: Add Support for AM654 SoC   Lokesh Vutla
• [U-Boot] [PATCH v2 4/5] arm64: dts: k3: Add u-boot specific nodes   Lokesh Vutla
• [U-Boot] [PATCH v2 5/5] configs: am65x_evm_a53: Add initial support   Lokesh Vutla
• [U-Boot] [PATCH v2 0/8] [1/3] Initial support Texas Instrument's AM654 Platform   Lokesh Vutla
• [U-Boot] [PATCH 11/25] clk: Allow clock defaults to be set also during re-reloc state   Lokesh Vutla
• [U-Boot] [PATCH v3 1/2] armv8: layerscape: Enable EHCI access for LS1012A   Ran Wang
• [U-Boot] [PATCH v3 2/2] armv8: layerscape: move ns_dev[] define from h to c file.   Ran Wang
• [U-Boot] [PATCH 1/3] qe: kconfig: U QE kconfig   Ran Wang
• [U-Boot] [PATCH 2/3] arm: layerscape: Remove CONFIG_U_QE define in ls1012atwr.h   Ran Wang
• [U-Boot] [PATCH 3/3] armv7: ls102xa: Disable QE before enter deep sleep   Ran Wang
• [U-Boot] [PATCH v3 2/2] armv8: layerscape: move ns_dev[] define from h to c file.   Ran Wang
• [U-Boot] [PATCH v4 1/2] armv8: layerscape: move ns_dev[] define from h to c file.   Ran Wang
• [U-Boot] [PATCH v4 2/2] armv8: layerscape: Enable EHCI access for LS1012A   Ran Wang
• [U-Boot] [PATCH] efi_loader: don't allocate unusable RAM   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: align carveout size   Stephen Warren
• [U-Boot] [PATCH] efi_loader: don't allocate unusable RAM   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: align carveout size   Stephen Warren
• [U-Boot] [PATCH] travis: give every job a name   Stephen Warren
• [U-Boot] [PATCH] Revert "efi_loader: efi_allocate_pages is too restrictive"   Stephen Warren
• [U-Boot] [PATCH] efi_loader: don't allocate unusable RAM   Stephen Warren
• [U-Boot] [PATCH v2 3/8] test/py: Import 'configparser' lower case to be python 3.x safe   Stephen Warren
• [U-Boot] [PATCH v4 7/7] cmd: Add bind/unbind commands to bind a device to a driver from the command line   Stephen Warren
• [U-Boot] [PATCH 1/2] ARM: tegra: reserve unmapped RAM so EFI doesn't use it   Stephen Warren
• [U-Boot] [PATCH 2/2] Revert "Revert "efi_loader: efi_allocate_pages is too restrictive""   Stephen Warren
• [U-Boot] [PATCH V2 1/2] ARM: tegra: reserve unmapped RAM so EFI doesn't use it   Stephen Warren
• [U-Boot] [PATCH V2 2/2] Revert "Revert "efi_loader: efi_allocate_pages is too restrictive""   Stephen Warren
• [U-Boot] [PATCH V2 1/2] ARM: tegra: reserve unmapped RAM so EFI doesn't use it   Stephen Warren
• [U-Boot] [PATCH V3 1/3] efi_loader: simplify ifdefs   Stephen Warren
• [U-Boot] [PATCH V3 2/3] ARM: tegra: reserve unmapped RAM so EFI doesn't use it   Stephen Warren
• [U-Boot] [PATCH V3 3/3] Revert "Revert "efi_loader: efi_allocate_pages is too restrictive""   Stephen Warren
• [U-Boot] [PATCH] ARM: tegra: align carveout size   Tom Warren
• [U-Boot] Pull request, u-boot-tegra/master   Tom Warren
• [U-Boot] UBI fixable bit-flip issue   Richard Weinberger
• [U-Boot] [PATCH 0/2] socfpga: cleanup files generated for spl   Dalon Westergreen
• [U-Boot] [PATCH 1/2] spl: socfpga: only gen5 devices and arria10 require sfp image   Dalon Westergreen
• [U-Boot] [PATCH 2/2] spl: socfpga: stratix10: add hex file output for spl image   Dalon Westergreen
• [U-Boot] [PATCH 2/2] spl: socfpga: stratix10: add hex file output for spl image   Dalon L Westergreen
• [U-Boot] [PATCH 2/2] spl: socfpga: stratix10: add hex file output for spl image   Dalon L Westergreen
• [U-Boot] [PATCH 2/2] spl: socfpga: stratix10: add hex file output for spl image   Dalon L Westergreen
• [U-Boot] [PATCH 2/2] spl: socfpga: stratix10: add hex file output for spl image   Dalon L Westergreen
• [U-Boot] [PATCH 2/2] spl: socfpga: stratix10: add hex file output for spl image   Dalon L Westergreen
• [U-Boot] [PATCH 0/2] Convert fdtdec_setup_memory_banksize() to use livetree   Jens Wiklander
• [U-Boot] [PATCH 1/2] ofnode: add ofnode_by_prop_value()   Jens Wiklander
• [U-Boot] [PATCH 2/2] fdt: fdtdec_setup_memory_banksize() use livetree   Jens Wiklander
• [U-Boot] [PATCH 00/10] AVB using OP-TEE   Jens Wiklander
• [U-Boot] [PATCH 01/10] dm: fdt: scan for devices under /firmware too   Jens Wiklander
• [U-Boot] [PATCH 02/10] cmd: avb read_rb: print rb_idx in hexadecimal   Jens Wiklander
• [U-Boot] [PATCH 03/10] mmc: rpmb: add mmc_rpmb_route_frames()   Jens Wiklander
• [U-Boot] [PATCH 04/10] Add UCLASS_TEE for Trusted Execution Environment   Jens Wiklander
• [U-Boot] [PATCH 05/10] dt/bindings: add bindings for optee   Jens Wiklander
• [U-Boot] [PATCH 06/10] tee: add OP-TEE driver   Jens Wiklander
• [U-Boot] [PATCH 07/10] arm: dt: hikey: Add optee node   Jens Wiklander
• [U-Boot] [PATCH 08/10] optee: support routing of rpmb data frames to mmc   Jens Wiklander
• [U-Boot] [PATCH 09/10] tee: optee: support AVB trusted application   Jens Wiklander
• [U-Boot] [PATCH 10/10] avb_verify: support using OP-TEE TA AVB   Jens Wiklander
• [U-Boot] [PATCH v2 0/3] Convert fdtdec_setup_memory_banksize() to use livetree   Jens Wiklander
• [U-Boot] [PATCH v2 1/3] ofnode: add ofnode_by_prop_value()   Jens Wiklander
• [U-Boot] [PATCH v2 2/3] fdt: fdtdec_setup_memory_banksize() use livetree   Jens Wiklander
• [U-Boot] [PATCH v2 3/3] test: ofnode: test ofnode_by_prop_value()   Jens Wiklander
• [U-Boot] [PATCH 04/10] Add UCLASS_TEE for Trusted Execution Environment   Jens Wiklander
• [U-Boot] [PATCH 03/10] mmc: rpmb: add mmc_rpmb_route_frames()   Jens Wiklander
• [U-Boot] [PATCH v2 00/15] AVB using OP-TEE   Jens Wiklander
• [U-Boot] [PATCH v2 01/15] dm: fdt: scan for devices under /firmware too   Jens Wiklander
• [U-Boot] [PATCH v2 02/15] cmd: avb read_rb: print rb_idx in hexadecimal   Jens Wiklander
• [U-Boot] [PATCH v2 03/15] cmd: avb: print error message if command fails   Jens Wiklander
• [U-Boot] [PATCH v2 04/15] mmc: rpmb: add mmc_rpmb_route_frames()   Jens Wiklander
• [U-Boot] [PATCH v2 05/15] Add UCLASS_TEE for Trusted Execution Environment   Jens Wiklander
• [U-Boot] [PATCH v2 06/15] dt/bindings: add bindings for optee   Jens Wiklander
• [U-Boot] [PATCH v2 07/15] tee: add OP-TEE driver   Jens Wiklander
• [U-Boot] [PATCH v2 08/15] Documentation: tee uclass and op-tee driver   Jens Wiklander
• [U-Boot] [PATCH v2 09/15] test: tee: test TEE uclass   Jens Wiklander
• [U-Boot] [PATCH v2 10/15] sandbox: dt: add sandbox_tee node   Jens Wiklander
• [U-Boot] [PATCH v2 11/15] configs: sandbox: enable CONFIG_TEE (TEE uclass)   Jens Wiklander
• [U-Boot] [PATCH v2 12/15] arm: dt: hikey: Add optee node   Jens Wiklander
• [U-Boot] [PATCH v2 13/15] optee: support routing of rpmb data frames to mmc   Jens Wiklander
• [U-Boot] [PATCH v2 14/15] tee: optee: support AVB trusted application   Jens Wiklander
• [U-Boot] [PATCH v2 15/15] avb_verify: support using OP-TEE TA AVB   Jens Wiklander
• [U-Boot] [PATCH 04/10] Add UCLASS_TEE for Trusted Execution Environment   Jens Wiklander
• [U-Boot] [PATCH 00/10] AVB using OP-TEE   Jens Wiklander
• [U-Boot] [PATCH 00/10] AVB using OP-TEE   Jens Wiklander
• [U-Boot] [PATCH v2 05/15] Add UCLASS_TEE for Trusted Execution Environment   Jens Wiklander
• [U-Boot] [PATCH v2 13/15] optee: support routing of rpmb data frames to mmc   Jens Wiklander
• [U-Boot] [PATCH v2 07/15] tee: add OP-TEE driver   Jens Wiklander
• [U-Boot] [PATCH v2 08/15] Documentation: tee uclass and op-tee driver   Jens Wiklander
• [U-Boot] [PATCH v2 10/15] sandbox: dt: add sandbox_tee node   Jens Wiklander
• [U-Boot] [PATCH v2 11/15] configs: sandbox: enable CONFIG_TEE (TEE uclass)   Jens Wiklander
• [U-Boot] [PATCH v2 14/15] tee: optee: support AVB trusted application   Jens Wiklander
• [U-Boot] Ordering PCI device probes   Aaron Williams
• [U-Boot] Cavium Octeon support for u-boot   Aaron Williams
• [U-Boot] [PATCH] arm: omap: configs: various: Remove references to OMAP34XX_UARTx   Derald Woods
• [U-Boot] [PATCH] ARM: omap3: evm: Enable CONFIG_BLK and misc. cleanup   Derald D. Woods
• [U-Boot] [PATCH] GPIO: omap_gpio: Fix gpio name names with device tree   Derald D. Woods
• [U-Boot] [PATCH 2/2] ARM: am3517_evm: Disable DM_I2C_COMPAT   Derald D. Woods
• [U-Boot] [PATCH v3] serial: omap: Introduce DM specific omap serial   Derald D. Woods
• [U-Boot] [PATCH 3/9] common: include <inttypes.h> always   Masahiro Yamada
• [U-Boot] [PATCH 1/3] Remove CONFIG_USE_STDINT   Masahiro Yamada
• [U-Boot] [PATCH 2/3] arch: types.h: factor out fixed width typedefs to int-ll64.h   Masahiro Yamada
• [U-Boot] [PATCH 3/3] Remove <inttypes.h> includes and PRI* usages in printf() entirely   Masahiro Yamada
• [U-Boot] [PATCH 3/3] Remove <inttypes.h> includes and PRI* usages in printf() entirely   Masahiro Yamada
• [U-Boot] [PATCH] Make kmalloc'ed memory really DMA-safe   Masahiro Yamada
• [U-Boot] [PATCH] mtd: nand: denali_dt: Add reset support   Masahiro Yamada
• [U-Boot] [PATCH] image-fdt: reserve lmb for fdt   Andy Yan
• [U-Boot] [PATCH] image-fdt: reserve lmb for fdt   Andy Yan
• [U-Boot] [PATCH] rockchip: update emmc/sd index for distro boot order   Kever Yang
• [U-Boot] [RESENT PATCH 1/2] rockchip: rk3128: use ROCKCHIP_BOOT_MODE_REG to update reboot flag   Kever Yang
• [U-Boot] [RESENT PATCH 2/2] rockchip: rk322x: use ROCKCHIP_BOOT_MODE_REG to update reboot flag   Kever Yang
• [U-Boot] [RESENT PATCH] rockchip: make_fit_atf: fix warning unit_address_vs_reg   Kever Yang
• [U-Boot] [PATCH v5 1/2] spl: add support to booting with OP-TEE   Kever Yang
• [U-Boot] [PATCH v5 2/2] rockchip: add fit source file for pack itb with op-tee   Kever Yang
• [U-Boot] [PATCH 00/10] rockchip: enable board_debug_uart_init for all soc   Kever Yang
• [U-Boot] [RFC]Remove SPL Framework with a MACRO   Kever Yang
• [U-Boot] [PATCH 11/25] clk: Allow clock defaults to be set also during re-reloc state   Kever Yang
• [U-Boot] [PATCH] TPL/SPL: add separate CONFIG_TPL_FRAMEWORK for TPL   Kever Yang
• [U-Boot] [PATCH] rockchip: add TPL_TINY_FRAMEWORK support   Kever Yang
• [U-Boot] [PATCH] rockchip: dts: fix unnecessary '-cells' warning   Kever Yang
• [U-Boot] [PATCH] TPL/SPL: add separate CONFIG_TPL_FRAMEWORK for TPL   Kever Yang
• [U-Boot] [U-Boot, 01/10] rockchip: enable DEBUG_UART_BOARD_INIT by default   Kever Yang
• [U-Boot] OSFC Tickets   Zaolin
• [U-Boot] [PATCH] net: fman: Support both new and legacy FMan Compatibles   Qiang Zhao
• [U-Boot] [v2 patch] net: fman: Support both new and legacy FMan Compatibles   Qiang Zhao
• [U-Boot] [linux-sunxi] [PATCH v2 00/13] Allwinner H6 support (w/ SPL)   Icenowy Zheng
• [U-Boot] [linux-sunxi] [PATCH v2 00/13] Allwinner H6 support (w/ SPL)   Icenowy Zheng
• [U-Boot] Pull request: u-boot-sunxi/master   Icenowy Zheng
• [U-Boot] Pull request: u-boot-sunxi/master   Icenowy Zheng
• [U-Boot] Pull request: u-boot-sunxi/master   Icenowy Zheng
• [U-Boot] [PATCH] sunxi: disable Pine A64 model detection code on non-A64 SoCs   Icenowy Zheng
• [U-Boot] Pull request: u-boot-sunxi/master   Icenowy Zheng
• [U-Boot] [PATCH] sunxi: fix sid base address macro name for H6   Icenowy Zheng
• [U-Boot] [PATCH v3 1/8] armv8: enable BLK code configuration   Yinbo Zhu
• [U-Boot] [PATCH v2 2/8] armv8/ls1088a/ls2088a: esdhc: Add esdhc clock support   Yinbo Zhu
• [U-Boot] [PATCH v3 3/8] Enable CONFIG_BLK and CONFIG_DM_MMC to Kconfig   Yinbo Zhu
• [U-Boot] [PATCH v1 4/8] armv8: ls2088a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v1 5/8] armv8: ls1088a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v1 6/8] armv8: ls1043a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v1 7/8] armv8: ls1046a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v1 8/8] armv7: ls1021a: enable esdhc   Yinbo Zhu
• [U-Boot] [PATCH v4 1/8] armv8: enable BLK code configuration   Yinbo Zhu
• [U-Boot] [PATCH v4 2/8] armv8/ls1088a/ls2088a: esdhc: Add esdhc clock support   Yinbo Zhu
• [U-Boot] [PATCH v4 3/8] Enable CONFIG_BLK and CONFIG_DM_MMC to Kconfig   Yinbo Zhu
• [U-Boot] [PATCH v4 4/8] armv8: ls2088a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v4 5/8] armv8: ls1088a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v4 6/8] armv8: ls1043a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v4 7/8] armv8: ls1046a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v4 8/8] armv7: ls1021a: enable esdhc   Yinbo Zhu
• [U-Boot] [PATCH v5 1/8] dm: mmc: use block layer in mmc driver   Yinbo Zhu
• [U-Boot] [PATCH v5 2/8] armv8/ls1088a/ls2088a: esdhc: Add esdhc clock support   Yinbo Zhu
• [U-Boot] [PATCH v5 3/8] Enable CONFIG_BLK and CONFIG_DM_MMC to Kconfig   Yinbo Zhu
• [U-Boot] [PATCH v5 4/8] armv8: ls2088a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v5 5/8] armv8: ls1088a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v5 6/8] armv8: ls1043a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v5 7/8] armv8: ls1046a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v5 8/8] armv7: ls1021a: enable esdhc   Yinbo Zhu
• [U-Boot] [PATCH v6 1/8] dm: mmc: use block layer in mmc driver   Yinbo Zhu
• [U-Boot] [PATCH v6 2/8] armv8/ls1088a/ls2088a: esdhc: Add esdhc clock support   Yinbo Zhu
• [U-Boot] [PATCH v6 3/8] armv8: ls2088a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v6 4/8] armv8: ls1088a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v6 5/8] armv8: ls1043a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v6 6/8] armv8: ls1046a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v6 7/8] armv7: ls1021a: enable esdhc   Yinbo Zhu
• [U-Boot] [PATCH v6 8/8] Enable CONFIG_BLK and CONFIG_DM_MMC to Kconfig   Yinbo Zhu
• [U-Boot] [PATCH v6 1/8] dm: mmc: use block layer in mmc driver   Yinbo Zhu
• [U-Boot] [PATCH v7 1/8] dm: mmc: use block layer in mmc driver   Yinbo Zhu
• [U-Boot] [PATCH v7 2/8] armv8/ls1088a/ls2088a: esdhc: Add esdhc clock support   Yinbo Zhu
• [U-Boot] [PATCH v7 3/8] armv8: ls2088a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v7 4/8] armv8: ls1088a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v7 5/8] armv8: ls1043a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v7 6/8] armv8: ls1046a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v7 7/8] armv7: ls1021a: enable esdhc   Yinbo Zhu
• [U-Boot] [PATCH v7 8/8] Enable CONFIG_BLK and CONFIG_DM_MMC to Kconfig   Yinbo Zhu
• [U-Boot] [PATCH v8 1/8] ppa/fm/qe: use block layer in ppa/fm/qe driver   Yinbo Zhu
• [U-Boot] [PATCH v8 2/8] armv8/ls1088a/ls2088a: esdhc: Add esdhc clock support   Yinbo Zhu
• [U-Boot] [PATCH v8 3/8] armv8: ls2088a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v8 4/8] armv8: ls1088a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v8 5/8] armv8: ls1043a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v8 6/8] armv8: ls1046a: add eSDHC node   Yinbo Zhu
• [U-Boot] [PATCH v8 7/8] armv7: ls1021a: enable esdhc   Yinbo Zhu
• [U-Boot] [PATCH v8 8/8] Enable CONFIG_BLK and CONFIG_DM_MMC to Kconfig   Yinbo Zhu
• [U-Boot] [PATCH v6 1/8] dm: mmc: use block layer in mmc driver   Yinbo Zhu
• [U-Boot] bootargs   dbegun
• [U-Boot] [PATCH] ARM: dts: am33xx: fix SLEWCTRL_FAST pinctrl binding   Christian.Amann at de.bosch.com
• [U-Boot] [PATCH v1 0/3] Enable all asynchronous abort exceptions taken to EL3   chee.hong.ang at intel.com
• [U-Boot] [PATCH v1 1/3] ARMv8: Enable all asynchronous abort exceptions taken to EL3   chee.hong.ang at intel.com
• [U-Boot] [PATCH v1 2/3] ARMv8: Add EL3 exception handling for ARMv8's Kconfig   chee.hong.ang at intel.com
• [U-Boot] [PATCH v1 3/3] ARMv8: SError exception handling in PSCI exception vectors   chee.hong.ang at intel.com
• [U-Boot] [PATCH 00/19] Marvell PXA3XX NAND driver fixes and extensions   kostap at marvell.com
• [U-Boot] [PATCH 01/19] mtd: nand: pxa3xx_nand: Increase initial buffer size   kostap at marvell.com
• [U-Boot] [PATCH 02/19] mtd: nand: pxa3xx_nand: use nand_to_mtd()   kostap at marvell.com
• [U-Boot] [PATCH 03/19] mtd: nand: pxa3xx_nand: sync pxa3xx_nand_set_sdr_timing()   kostap at marvell.com
• [U-Boot] [PATCH 04/19] mtd: nand: pxa3xx_nand: fix early spurious interrupt   kostap at marvell.com
• [U-Boot] [PATCH 05/19] mtd: nand: pxa3xx-nand: fix random command timeouts   kostap at marvell.com
• [U-Boot] [PATCH 06/19] nand: pxa3xx: Increase READ_ID buffer and make the size static   kostap at marvell.com
• [U-Boot] [PATCH 07/19] mtd: pxa3xx_nand: Increase the initial chunk size   kostap at marvell.com
• [U-Boot] [PATCH 08/19] mtd: pxa3xx_nand: Fix initial controller configuration   kostap at marvell.com
• [U-Boot] [PATCH 09/19] mtd: pxa3xx_nand: Simplify pxa3xx_nand_scan   kostap at marvell.com
• [U-Boot] [PATCH 10/19] mtd: nand: pxa3xx_nand: add support for partial chunks   kostap at marvell.com
• [U-Boot] [PATCH 11/19] a70x0: a80x0: add soc type and revision printing in boot log   kostap at marvell.com
• [U-Boot] [PATCH 12/19] fix: nand: pxa3xx: Add SoC-specific enable function   kostap at marvell.com
• [U-Boot] [PATCH 13/19] mtd: nand: pxa3xx: Fix READOOB implementation   kostap at marvell.com
• [U-Boot] [PATCH 14/19] mtd: nand: pxa3xx: add support for 2KB 8-bit flash   kostap at marvell.com
• [U-Boot] [PATCH 15/19] mtd: nand: pxa3xx: add support for Toshiba flash   kostap at marvell.com
• [U-Boot] [PATCH 16/19] fix: nand: Replace hardcoded page chunk size with calculated one   kostap at marvell.com
• [U-Boot] [PATCH 17/19] nand: pxa3xx: cosmetic: add comments to the timing layout structures   kostap at marvell.com
• [U-Boot] [PATCH 18/19] nand: pxa3xx: Add support for 8KB page 4 and 8 bit ECC NAND   kostap at marvell.com
• [U-Boot] [PATCH 19/19] fix: nand: pxa3xx: Add WA for eliminating flash ready timeout   kostap at marvell.com
• [U-Boot] [PATCH 0/5] Fixes to Marvell A38x platforms   kostap at marvell.com
• [U-Boot] [PATCH 1/5] fix: env: Fix the SPI flash device setup for DM mode   kostap at marvell.com
• [U-Boot] [PATCH 2/5] fix: mvebu: Add SPI parameters for environment setup   kostap at marvell.com
• [U-Boot] [PATCH 3/5] fix: cmd: mvebu: Eclude mvebu commands from SPL builds   kostap at marvell.com
• [U-Boot] [PATCH 4/5] cmd: mvebu: bubt: Add support for legacy Marvell SoCs   kostap at marvell.com
• [U-Boot] [PATCH 5/5] defconfig: db-88f6820-gp: Add bubt command to the build   kostap at marvell.com
• [U-Boot] [PATCH v7 0/8] NXP LS1046A SMMU enabling patches   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v7 1/8] armv8: fsl-layerscape: add missing register blocks base address defines   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v7 2/8] armv8: ls1046a: advertise QMan v3 in configuration   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v7 3/8] misc: fsl_portals: setup QMAN_BAR{E} also on ARM platforms   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v7 4/8] armv8: fsl-layerscape: add missing debug stream ID   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v7 5/8] armv8: ls1046a: initial icid setup support   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v7 6/8] armv8: ls1046a: add icid setup for qman portals   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v7 7/8] armv8: ls1046a: setup fman ports ICIDs and device tree   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v7 8/8] armv8: ls1046a: setup SEC ICIDs and fix up device tree   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v8 0/8] NXP LS1046A SMMU enabling patches   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v8 1/8] armv8: fsl-layerscape: add missing register blocks base address defines   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v8 2/8] armv8: ls1046a: advertise QMan v3 in configuration   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v8 3/8] misc: fsl_portals: setup QMAN_BAR{E} also on ARM platforms   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v8 4/8] armv8: fsl-layerscape: add missing debug stream ID   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v8 5/8] armv8: ls1046a: initial icid setup support   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v8 6/8] armv8: ls1046a: add icid setup for qman portals   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v8 7/8] armv8: ls1046a: setup fman ports ICIDs and device tree   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH v8 8/8] armv8: ls1046a: setup SEC ICIDs and fix up device tree   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH 0/4] NXP LS1043A SMMU enabling patches   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH 1/4] armv8: fsl-layerscape: add missing qe base address define   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH 2/4] armv8: ls1043a: advertise QMan v3 in configuration   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH 3/4] armv8: ls1043a: add icid setup support   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH 4/4] armv8: ls1043a: enable icid setup for qman portals   laurentiu.tudor at nxp.com
• [U-Boot] [PATCH 01/18] gpio: mpc8xxx: add support for Layerscape SoC   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 02/18] armv8: ls1043a: add gpio entry   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 03/18] armv8: ls1043ardb: Enable GPIO driver   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 04/18] armv8: ls1043aqds: Enable GPIO driver   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 05/18] armv8: ls1046a: add gpio entry   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 06/18] armv8: ls1046a: Enable GPIO driver   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 07/18] armv8: ls1088a: add gpio entry   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 08/18] armv8: ls1088a: Enable GPIO driver   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 09/18] armv8: ls2080a: add gpio entry   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 10/18] armv8: ls2080a: Enable GPIO driver   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 11/18] board: freescale: sys_eeprom: Add i2c DM support   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 12/18] armv8: ls1046a: add i2c entry   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 13/18] armv8: ls1046ardb: enable I2C DM and EEPROM DM   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 14/18] armv8: ls1043ardb: enable I2C DM and EEPROM DM   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 15/18] armv8: ls1088a: add i2c entry   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 16/18] armv8: ls1088ardb: enable I2C DM and EEPROM DM   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 17/18] armv8: ls208xa: add i2c entry   ying.zhang22455 at nxp.com
• [U-Boot] [PATCH 18/18] armv8: ls2080ardb: enable I2C DM and EEPROM DM   ying.zhang22455 at nxp.com