[U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
sbabic at denx.de
Fri Aug 31 19:26:38 UTC 2018
On 31/08/2018 15:07, Tom Rini wrote:
> On Fri, Aug 31, 2018 at 03:04:31PM +0200, Stefano Babic wrote:
>> Hi Tom,
>>
>> please pull from u-boot-imx, thanks !
>>
>> The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:
>>
>> configs: am57xx: change default board name to beagle_x15 (2018-08-26
>> 12:26:16 -0400)
>>
>> are available in the Git repository at:
>>
>> git://www.denx.de/git/u-boot-imx.git master
>>
>> for you to fetch changes up to 2846e663fd62200a189bba357135e284a379a38b:
>>
>> imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig (2018-08-31
>> 12:08:43 +0200)
>>
>> ----------------------------------------------------------------
>> Alex Kiernan (1):
>> Cleanup CONFIG_BOOTDELAY on cl-som-imx7
>>
>> Anson Huang (3):
>> imx: mx7: psci: improve cpu hotplug flow
>> imx: mx7: add gpc initialization for low power mode
>> imx: mx7: add system suspend/resume support
>>
>> Denis Zalevskiy (6):
>> board: ge: Remove EEPROM bus param from read_vpd()
>> board: ge: Move VPD EEPROM configuration to the defconfig
>> bootcount: i2c: Add bus switching to the I2C bootcount driver
>> bootcount: Configure length limit for I2C bootcount
>> board: ge: Move VPD reading to the vpd_reader
>> board: ge: Store bootcount in EEPROM on PPD and Bx50v3
>>
>> Martin Kaiser (1):
>> watchdog: mx25: use the imx_watchdog driver for mx25
>>
>> Stefan Agner (2):
>> board: toradex: common: fail gracefully on missing NAND chip
>> colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support
>>
>> Stefano Babic (2):
>> Merge branch 'master' of git://git.denx.de/u-boot into master
>> imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig
>>
>> Sébastien Szymanski (1):
>> ARM: opos6ul: make the board boot again
>>
>> Ye Li (6):
>> imx: imx6sx-sdb: Enable DM QSPI driver
>> imx: imx6sx-sabreauto: convert to use DM QSPI driver
>> imx: imx7d-sdb: Add DM QSPI support
>> dts: imx6ul: Update alias to support DM
>> dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards
>> imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot
>>
>> arch/arm/dts/Makefile | 7 +-
>> arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi | 16 +
>> arch/arm/dts/imx6sx-sabreauto.dts | 40 ++
>> arch/arm/dts/imx6sx-sdb-u-boot.dtsi | 16 +
>> arch/arm/dts/imx6sx.dtsi | 12 +-
>> arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi | 10 +
>> arch/arm/dts/imx6ul-14x14-evk.dts | 427 +++++++++++++++++++
>> arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi | 10 +
>> arch/arm/dts/imx6ul-9x9-evk.dts | 471
>> +++++++++++++++++++++
>> arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi | 28 ++
>> arch/arm/dts/imx6ul-opos6ul.dtsi | 2 -
>> arch/arm/dts/imx6ul-opos6uldev-u-boot.dts | 25 ++
>> arch/arm/dts/imx6ul-opos6uldev.dts | 2 -
>> arch/arm/dts/imx6ul.dtsi | 13 +-
>> arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi | 10 +
>> arch/arm/dts/imx7d-sdb-qspi.dts | 44 ++
>> arch/arm/dts/imx7d-sdb.dts | 6 +-
>> arch/arm/dts/imx7d.dtsi | 12 +
>> arch/arm/dts/imx7s.dtsi | 22 +-
>> arch/arm/include/asm/arch-mx25/imx-regs.h | 1 +
>> arch/arm/mach-imx/mx7/Makefile | 2 +-
>> arch/arm/mach-imx/mx7/psci-mx7.c | 472
>> +++++++++++++++++++++-
>> arch/arm/mach-imx/mx7/psci-suspend.S | 67 +++
>> arch/arm/mach-imx/mx7/soc.c | 103 +++++
>> board/freescale/mx6sxsabreauto/mx6sxsabreauto.c | 24 --
>> board/freescale/mx6sxsabresd/mx6sxsabresd.c | 25 --
>> board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 208 ++--------
>> board/freescale/mx7dsabresd/mx7dsabresd.c | 16 -
>> board/ge/bx50v3/Kconfig | 2 +
>> board/ge/bx50v3/bx50v3.c | 57 +--
>> board/ge/common/Kconfig | 14 +
>> board/ge/common/vpd_reader.c | 57 ++-
>> board/ge/common/vpd_reader.h | 16 +-
>> board/ge/mx53ppd/Kconfig | 2 +
>> board/ge/mx53ppd/mx53ppd.c | 50 +--
>> board/toradex/colibri_imx7/Kconfig | 42 +-
>> board/toradex/colibri_imx7/MAINTAINERS | 4 +
>> board/toradex/colibri_imx7/colibri_imx7.c | 41 +-
>> board/toradex/common/tdx-cfg-block.c | 7 +-
>> configs/ge_bx50v3_defconfig | 27 +-
>> configs/mx53ppd_defconfig | 29 +-
>> configs/mx6sxsabreauto_defconfig | 2 +
>> configs/mx6sxsabresd_defconfig | 7 +
>> configs/mx6ul_14x14_evk_defconfig | 17 +-
>> configs/mx6ul_9x9_evk_defconfig | 20 +-
>> configs/mx7dsabresd_qspi_defconfig | 84 ++++
>> configs/opos6uldev_defconfig | 2 +-
>> drivers/bootcount/Kconfig | 21 +-
>> drivers/bootcount/bootcount_i2c.c | 78 +++-
>> drivers/watchdog/Makefile | 2 +-
>> include/configs/cl-som-imx7.h | 2 -
>> include/configs/colibri_imx7.h | 90 ++++-
>> include/configs/ge_bx50v3.h | 6 +-
>> include/configs/mx53ppd.h | 6 +-
>> include/configs/mx6sxsabresd.h | 4 +
>> include/configs/mx6ul_14x14_evk.h | 13 +-
>> include/configs/mx7dsabresd.h | 4 +-
>> 57 files changed, 2376 insertions(+), 421 deletions(-)
>
> This is a lot. I know I should have tagged -rc3 this past Monday, but
> forgot (and so, yeah, I need to get back into my habit of calendar
> reminders), but still, the release is 10 days away. It looks like
> there's a lot of new stuff in here too, not just clean-ups. Are you
> sure this is all appropriate at this stage? Thanks!
Several of them are fixes and I got reminder for the submitter to psuh
them from the releases. These are from Anson and Stefan. I merged Ye's
patches sometime ago, but I have not sent any PR after that.Sebastien's
partch is a fix, too, and I merge GE's board because patches are quite
old, ready to be merged and related just to the GE boards. I had to fix
a broken board after merging, so my is also a fix. So yes, I think they
are fixes for the release. It is just that I picked modt of them quite
late because I had no time to do this before.
Thanks,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list