[U-Boot] [PATCH 1/4] topic-miamiplus: Run CPU at 800MHz for speedgrade-2

Mike Looijmans mike.looijmans at topic.nl
Fri Aug 24 12:00:38 UTC 2018


The miamiplus contains a speedgrade-2 device, which may run the CPU at 800MHz.
Change the PLL setting to 800MHz, and adapt the setpoints in the devicetree.

Signed-off-by: Mike Looijmans <mike.looijmans at topic.nl>
---
 arch/arm/dts/zynq-topic-miamiplus.dts                | 9 +++++++++
 board/topic/zynq/zynq-topic-miamiplus/ps7_init_gpl.c | 4 ++--
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/zynq-topic-miamiplus.dts b/arch/arm/dts/zynq-topic-miamiplus.dts
index c0ccea9..df53886 100644
--- a/arch/arm/dts/zynq-topic-miamiplus.dts
+++ b/arch/arm/dts/zynq-topic-miamiplus.dts
@@ -11,6 +11,15 @@
 	compatible = "topic,miamiplus", "xlnx,zynq-7000";
 };
 
+/* The miamiplus contains a speedgrade-2 device and runs at 800MHz */
+&cpu0 {
+	operating-points = <
+		/* kHz    uV */
+		800000  1000000
+		400000  1000000
+	>;
+};
+
 &qspi {
 	is-dual = <1>;
 };
diff --git a/board/topic/zynq/zynq-topic-miamiplus/ps7_init_gpl.c b/board/topic/zynq/zynq-topic-miamiplus/ps7_init_gpl.c
index c1cc1df..fd5846a 100644
--- a/board/topic/zynq/zynq-topic-miamiplus/ps7_init_gpl.c
+++ b/board/topic/zynq/zynq-topic-miamiplus/ps7_init_gpl.c
@@ -8,8 +8,8 @@
 
 static unsigned long ps7_pll_init_data_3_0[] = {
 	EMIT_MASKWRITE(0XF8000008, 0x0000FFFFU, 0x0000DF0DU),
-	EMIT_MASKWRITE(0XF8000110, 0x003FFFF0U, 0x000FA220U),
-	EMIT_MASKWRITE(0XF8000100, 0x0007F000U, 0x00028000U),
+	EMIT_MASKWRITE(0XF8000110, 0x003FFFF0U, 0x000FA240U),
+	EMIT_MASKWRITE(0XF8000100, 0x0007F000U, 0x00030000U),
 	EMIT_MASKWRITE(0XF8000100, 0x00000010U, 0x00000010U),
 	EMIT_MASKWRITE(0XF8000100, 0x00000001U, 0x00000001U),
 	EMIT_MASKWRITE(0XF8000100, 0x00000001U, 0x00000000U),
-- 
1.9.1



More information about the U-Boot mailing list