[U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
trini at konsulko.com
Fri Aug 31 13:07:43 UTC 2018
On Fri, Aug 31, 2018 at 03:04:31PM +0200, Stefano Babic wrote:
> Hi Tom,
>
> please pull from u-boot-imx, thanks !
>
> The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:
>
> configs: am57xx: change default board name to beagle_x15 (2018-08-26
> 12:26:16 -0400)
>
> are available in the Git repository at:
>
> git://www.denx.de/git/u-boot-imx.git master
>
> for you to fetch changes up to 2846e663fd62200a189bba357135e284a379a38b:
>
> imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig (2018-08-31
> 12:08:43 +0200)
>
> ----------------------------------------------------------------
> Alex Kiernan (1):
> Cleanup CONFIG_BOOTDELAY on cl-som-imx7
>
> Anson Huang (3):
> imx: mx7: psci: improve cpu hotplug flow
> imx: mx7: add gpc initialization for low power mode
> imx: mx7: add system suspend/resume support
>
> Denis Zalevskiy (6):
> board: ge: Remove EEPROM bus param from read_vpd()
> board: ge: Move VPD EEPROM configuration to the defconfig
> bootcount: i2c: Add bus switching to the I2C bootcount driver
> bootcount: Configure length limit for I2C bootcount
> board: ge: Move VPD reading to the vpd_reader
> board: ge: Store bootcount in EEPROM on PPD and Bx50v3
>
> Martin Kaiser (1):
> watchdog: mx25: use the imx_watchdog driver for mx25
>
> Stefan Agner (2):
> board: toradex: common: fail gracefully on missing NAND chip
> colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support
>
> Stefano Babic (2):
> Merge branch 'master' of git://git.denx.de/u-boot into master
> imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig
>
> Sébastien Szymanski (1):
> ARM: opos6ul: make the board boot again
>
> Ye Li (6):
> imx: imx6sx-sdb: Enable DM QSPI driver
> imx: imx6sx-sabreauto: convert to use DM QSPI driver
> imx: imx7d-sdb: Add DM QSPI support
> dts: imx6ul: Update alias to support DM
> dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards
> imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot
>
> arch/arm/dts/Makefile | 7 +-
> arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi | 16 +
> arch/arm/dts/imx6sx-sabreauto.dts | 40 ++
> arch/arm/dts/imx6sx-sdb-u-boot.dtsi | 16 +
> arch/arm/dts/imx6sx.dtsi | 12 +-
> arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi | 10 +
> arch/arm/dts/imx6ul-14x14-evk.dts | 427 +++++++++++++++++++
> arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi | 10 +
> arch/arm/dts/imx6ul-9x9-evk.dts | 471
> +++++++++++++++++++++
> arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi | 28 ++
> arch/arm/dts/imx6ul-opos6ul.dtsi | 2 -
> arch/arm/dts/imx6ul-opos6uldev-u-boot.dts | 25 ++
> arch/arm/dts/imx6ul-opos6uldev.dts | 2 -
> arch/arm/dts/imx6ul.dtsi | 13 +-
> arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi | 10 +
> arch/arm/dts/imx7d-sdb-qspi.dts | 44 ++
> arch/arm/dts/imx7d-sdb.dts | 6 +-
> arch/arm/dts/imx7d.dtsi | 12 +
> arch/arm/dts/imx7s.dtsi | 22 +-
> arch/arm/include/asm/arch-mx25/imx-regs.h | 1 +
> arch/arm/mach-imx/mx7/Makefile | 2 +-
> arch/arm/mach-imx/mx7/psci-mx7.c | 472
> +++++++++++++++++++++-
> arch/arm/mach-imx/mx7/psci-suspend.S | 67 +++
> arch/arm/mach-imx/mx7/soc.c | 103 +++++
> board/freescale/mx6sxsabreauto/mx6sxsabreauto.c | 24 --
> board/freescale/mx6sxsabresd/mx6sxsabresd.c | 25 --
> board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 208 ++--------
> board/freescale/mx7dsabresd/mx7dsabresd.c | 16 -
> board/ge/bx50v3/Kconfig | 2 +
> board/ge/bx50v3/bx50v3.c | 57 +--
> board/ge/common/Kconfig | 14 +
> board/ge/common/vpd_reader.c | 57 ++-
> board/ge/common/vpd_reader.h | 16 +-
> board/ge/mx53ppd/Kconfig | 2 +
> board/ge/mx53ppd/mx53ppd.c | 50 +--
> board/toradex/colibri_imx7/Kconfig | 42 +-
> board/toradex/colibri_imx7/MAINTAINERS | 4 +
> board/toradex/colibri_imx7/colibri_imx7.c | 41 +-
> board/toradex/common/tdx-cfg-block.c | 7 +-
> configs/ge_bx50v3_defconfig | 27 +-
> configs/mx53ppd_defconfig | 29 +-
> configs/mx6sxsabreauto_defconfig | 2 +
> configs/mx6sxsabresd_defconfig | 7 +
> configs/mx6ul_14x14_evk_defconfig | 17 +-
> configs/mx6ul_9x9_evk_defconfig | 20 +-
> configs/mx7dsabresd_qspi_defconfig | 84 ++++
> configs/opos6uldev_defconfig | 2 +-
> drivers/bootcount/Kconfig | 21 +-
> drivers/bootcount/bootcount_i2c.c | 78 +++-
> drivers/watchdog/Makefile | 2 +-
> include/configs/cl-som-imx7.h | 2 -
> include/configs/colibri_imx7.h | 90 ++++-
> include/configs/ge_bx50v3.h | 6 +-
> include/configs/mx53ppd.h | 6 +-
> include/configs/mx6sxsabresd.h | 4 +
> include/configs/mx6ul_14x14_evk.h | 13 +-
> include/configs/mx7dsabresd.h | 4 +-
> 57 files changed, 2376 insertions(+), 421 deletions(-)
This is a lot. I know I should have tagged -rc3 this past Monday, but
forgot (and so, yeah, I need to get back into my habit of calendar
reminders), but still, the release is 10 days away. It looks like
there's a lot of new stuff in here too, not just clean-ups. Are you
sure this is all appropriate at this stage? Thanks!
--
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180831/9a0809e0/attachment.sig>
More information about the U-Boot
mailing list