[U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
sbabic at denx.de
Fri Aug 31 13:04:31 UTC 2018
Hi Tom,
please pull from u-boot-imx, thanks !
The following changes since commit 11ed312896c5f5814064c5d45dcb2f53dc121437:
configs: am57xx: change default board name to beagle_x15 (2018-08-26
12:26:16 -0400)
are available in the Git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to 2846e663fd62200a189bba357135e284a379a38b:
imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig (2018-08-31
12:08:43 +0200)
----------------------------------------------------------------
Alex Kiernan (1):
Cleanup CONFIG_BOOTDELAY on cl-som-imx7
Anson Huang (3):
imx: mx7: psci: improve cpu hotplug flow
imx: mx7: add gpc initialization for low power mode
imx: mx7: add system suspend/resume support
Denis Zalevskiy (6):
board: ge: Remove EEPROM bus param from read_vpd()
board: ge: Move VPD EEPROM configuration to the defconfig
bootcount: i2c: Add bus switching to the I2C bootcount driver
bootcount: Configure length limit for I2C bootcount
board: ge: Move VPD reading to the vpd_reader
board: ge: Store bootcount in EEPROM on PPD and Bx50v3
Martin Kaiser (1):
watchdog: mx25: use the imx_watchdog driver for mx25
Stefan Agner (2):
board: toradex: common: fail gracefully on missing NAND chip
colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support
Stefano Babic (2):
Merge branch 'master' of git://git.denx.de/u-boot into master
imx: missing CONFIG_MII in mx7dsabresd_qspi_defconfig
Sébastien Szymanski (1):
ARM: opos6ul: make the board boot again
Ye Li (6):
imx: imx6sx-sdb: Enable DM QSPI driver
imx: imx6sx-sabreauto: convert to use DM QSPI driver
imx: imx7d-sdb: Add DM QSPI support
dts: imx6ul: Update alias to support DM
dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards
imx: imx6ul_evk: Enable DM driver for iMX6UL EVK u-boot
arch/arm/dts/Makefile | 7 +-
arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi | 16 +
arch/arm/dts/imx6sx-sabreauto.dts | 40 ++
arch/arm/dts/imx6sx-sdb-u-boot.dtsi | 16 +
arch/arm/dts/imx6sx.dtsi | 12 +-
arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi | 10 +
arch/arm/dts/imx6ul-14x14-evk.dts | 427 +++++++++++++++++++
arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi | 10 +
arch/arm/dts/imx6ul-9x9-evk.dts | 471
+++++++++++++++++++++
arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi | 28 ++
arch/arm/dts/imx6ul-opos6ul.dtsi | 2 -
arch/arm/dts/imx6ul-opos6uldev-u-boot.dts | 25 ++
arch/arm/dts/imx6ul-opos6uldev.dts | 2 -
arch/arm/dts/imx6ul.dtsi | 13 +-
arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi | 10 +
arch/arm/dts/imx7d-sdb-qspi.dts | 44 ++
arch/arm/dts/imx7d-sdb.dts | 6 +-
arch/arm/dts/imx7d.dtsi | 12 +
arch/arm/dts/imx7s.dtsi | 22 +-
arch/arm/include/asm/arch-mx25/imx-regs.h | 1 +
arch/arm/mach-imx/mx7/Makefile | 2 +-
arch/arm/mach-imx/mx7/psci-mx7.c | 472
+++++++++++++++++++++-
arch/arm/mach-imx/mx7/psci-suspend.S | 67 +++
arch/arm/mach-imx/mx7/soc.c | 103 +++++
board/freescale/mx6sxsabreauto/mx6sxsabreauto.c | 24 --
board/freescale/mx6sxsabresd/mx6sxsabresd.c | 25 --
board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 208 ++--------
board/freescale/mx7dsabresd/mx7dsabresd.c | 16 -
board/ge/bx50v3/Kconfig | 2 +
board/ge/bx50v3/bx50v3.c | 57 +--
board/ge/common/Kconfig | 14 +
board/ge/common/vpd_reader.c | 57 ++-
board/ge/common/vpd_reader.h | 16 +-
board/ge/mx53ppd/Kconfig | 2 +
board/ge/mx53ppd/mx53ppd.c | 50 +--
board/toradex/colibri_imx7/Kconfig | 42 +-
board/toradex/colibri_imx7/MAINTAINERS | 4 +
board/toradex/colibri_imx7/colibri_imx7.c | 41 +-
board/toradex/common/tdx-cfg-block.c | 7 +-
configs/ge_bx50v3_defconfig | 27 +-
configs/mx53ppd_defconfig | 29 +-
configs/mx6sxsabreauto_defconfig | 2 +
configs/mx6sxsabresd_defconfig | 7 +
configs/mx6ul_14x14_evk_defconfig | 17 +-
configs/mx6ul_9x9_evk_defconfig | 20 +-
configs/mx7dsabresd_qspi_defconfig | 84 ++++
configs/opos6uldev_defconfig | 2 +-
drivers/bootcount/Kconfig | 21 +-
drivers/bootcount/bootcount_i2c.c | 78 +++-
drivers/watchdog/Makefile | 2 +-
include/configs/cl-som-imx7.h | 2 -
include/configs/colibri_imx7.h | 90 ++++-
include/configs/ge_bx50v3.h | 6 +-
include/configs/mx53ppd.h | 6 +-
include/configs/mx6sxsabresd.h | 4 +
include/configs/mx6ul_14x14_evk.h | 13 +-
include/configs/mx7dsabresd.h | 4 +-
57 files changed, 2376 insertions(+), 421 deletions(-)
create mode 100644 arch/arm/dts/imx6sx-sabreauto-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6sx-sdb-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6ul-14x14-evk-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6ul-14x14-evk.dts
create mode 100644 arch/arm/dts/imx6ul-9x9-evk-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6ul-9x9-evk.dts
create mode 100644 arch/arm/dts/imx6ul-opos6ul-u-boot.dtsi
create mode 100644 arch/arm/dts/imx6ul-opos6uldev-u-boot.dts
create mode 100644 arch/arm/dts/imx7d-sdb-qspi-u-boot.dtsi
create mode 100644 arch/arm/dts/imx7d-sdb-qspi.dts
create mode 100644 arch/arm/mach-imx/mx7/psci-suspend.S
create mode 100644 board/ge/common/Kconfig
create mode 100644 configs/mx7dsabresd_qspi_defconfig
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list