[U-Boot] [PATCH 3/4] configs/topic_miami.h: Use same partitioning for USB boot as for SD

[Mike Looijmans]

Use the same partitioning as the SD card by default. This allows to
insert an SD card into a USB reader or use an USB drive with the same
partitioning and boot using that instead of requiring a ramdisk image.

Signed-off-by: Mike Looijmans <mike.looijmans at topic.nl>
---
 include/configs/topic_miami.h | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h
index c32c63c..6f8f2b4 100644
--- a/include/configs/topic_miami.h
+++ b/include/configs/topic_miami.h
@@ -63,15 +63,15 @@
 # endif
 # define EXTRA_ENV_USB \
 	"usbreset=" ENV_USB_RESET "\0" \
-	"usbboot=run usbreset && if usb start; then " \
+	"usbboot=run usbreset; if usb start; then " \
 		"echo Booting from USB... && " \
 		"if load usb 0 0x1900000 ${bootscript}; then "\
 		"source 0x1900000; fi; " \
-		"load usb 0 ${kernel_addr} ${kernel_image} && " \
-		"load usb 0 ${devicetree_addr} ${devicetree_image} && " \
-		"load usb 0 ${ramdisk_load_address} ${ramdisk_image} && " \
-		"bootm ${kernel_addr} ${ramdisk_load_address} "\
-			"${devicetree_addr}; " \
+		"setenv bootargs console=ttyPS0,115200 " \
+			"root=/dev/sda2 rw rootfstype=ext4 rootwait quiet; " \
+		"load usb 0 ${kernel_addr} ${kernel_image}&& " \
+		"load usb 0 ${devicetree_addr} ${devicetree_image}&& " \
+		"bootm ${kernel_addr} - ${devicetree_addr}; " \
 	"fi\0"
   /* Note that addresses here should match the addresses in the env */
 # undef DFU_ALT_INFO
-- 
1.9.1