[U-Boot] [PATCH 16/18] armv8: ls1088ardb: enable I2C DM and EEPROM DM

[ying.zhang22455 at nxp.com]

From: Zhang Ying-22455 <ying.zhang22455 at nxp.com>

Some CONFIG options that are not supported on SPL must be
disabled because one .config is shared between SPL and U-Boot
proper going forward.

Such as CONFIG_I2C_DM is not supported in SPL at this time,
so we can only add a option CONFIG_I2C_DM in the image without
SPL.

After supporting the option CONFIG_SPL_I2C_DM in the future,
we can enable CONFIG_I2C_DM in all the image.

Signed-off-by: Zhang Ying-22455 <ying.zhang22455 at nxp.com>
---
 configs/ls1088ardb_qspi_SECURE_BOOT_defconfig | 3 +++
 configs/ls1088ardb_qspi_defconfig             | 3 +++
 include/configs/ls1088a_common.h              | 2 --
 include/configs/ls1088aqds.h                  | 2 ++
 include/configs/ls1088ardb.h                  | 8 ++++++++
 5 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
index 120527c..3ecd56f 100644
--- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
@@ -55,3 +55,6 @@ CONFIG_RSA_SOFTWARE_EXP=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_DM_GPIO=y
 CONFIG_MPC8XXX_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_DM_I2C_COMPAT=y
+CONFIG_DM_EEPROM=y
diff --git a/configs/ls1088ardb_qspi_defconfig b/configs/ls1088ardb_qspi_defconfig
index 0517b98..9d32261 100644
--- a/configs/ls1088ardb_qspi_defconfig
+++ b/configs/ls1088ardb_qspi_defconfig
@@ -53,3 +53,6 @@ CONFIG_USB_GADGET=y
 CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
 CONFIG_DM_GPIO=y
 CONFIG_MPC8XXX_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_DM_I2C_COMPAT=y
+CONFIG_DM_EEPROM=y
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 031c311..6ebae31 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -63,8 +63,6 @@
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2048 * 1024)
 
-/* I2C */
-#define CONFIG_SYS_I2C
 
 /* Serial Port */
 #define CONFIG_SYS_NS16550_SERIAL
diff --git a/include/configs/ls1088aqds.h b/include/configs/ls1088aqds.h
index d2c80fc..a40054c 100644
--- a/include/configs/ls1088aqds.h
+++ b/include/configs/ls1088aqds.h
@@ -308,6 +308,8 @@ unsigned long get_board_ddr_clk(void);
 
 #define PWM_CHANNEL0                    0x0
 
+#define CONFIG_SYS_I2C
+
 /*
 * RTC configuration
 */
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 36243f9..c7eb3a8 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -263,11 +263,16 @@
 * RTC configuration
 */
 #define RTC
+#define CONFIG_SYS_RTC_BUS_NUM		0
 #define CONFIG_RTC_PCF8563 1
 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 #define CONFIG_CMD_DATE
 #endif
 
+#ifdef CONFIG_SD_BOOT
+#define CONFIG_SYS_I2C
+#endif
+
 /* EEPROM */
 #define CONFIG_ID_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_NXID
@@ -276,6 +281,9 @@
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+#define FSL_I2C_EEPROM_DM_NAME			"i2c at 2300000"
+#define CONFIG_I2C_SET_DEFAULT_BUS_NUM
+#define CONFIG_I2C_DEFAULT_BUS_NUMBER		0
 
 #ifndef SPL_NO_QSPI
 /* QSPI device */
-- 
2.7.4