[U-Boot] [PATCH V3 28/32] serial: lpuart: support uclass clk api

Peng Fan peng.fan at nxp.com
Mon Aug 6 02:50:43 UTC 2018


Modify most APIs to use udevice as the first param, then
it will be easy to get the clk reference by using udevice pointer.
Use uclass api to get lpuart clk when CONFIG_CLK enabled.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/serial/serial_lpuart.c | 78 ++++++++++++++++++++++++++++++++----------
 1 file changed, 59 insertions(+), 19 deletions(-)

diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c
index b28f7cf68d..3887c3d1c8 100644
--- a/drivers/serial/serial_lpuart.c
+++ b/drivers/serial/serial_lpuart.c
@@ -4,6 +4,7 @@
  */
 
 #include <common.h>
+#include <clk.h>
 #include <dm.h>
 #include <fsl_lpuart.h>
 #include <watchdog.h>
@@ -104,6 +105,27 @@ u32 __weak get_lpuart_clk(void)
 	return CONFIG_SYS_CLK_FREQ;
 }
 
+ulong get_lpuart_clk_rate(struct udevice *dev)
+{
+	struct clk per_clk;
+	ulong rate;
+	int ret;
+
+	ret = clk_get_by_name(dev, "per", &per_clk);
+	if (ret) {
+		dev_err(dev, "Failed to get per clk: %d\n", ret);
+		return ret;
+	}
+
+	rate = clk_get_rate(&per_clk);
+	if ((long)rate <= 0) {
+		dev_err(dev, "Failed to get per clk rate: %ld\n", (long)rate);
+		return ret;
+	}
+
+	return  rate;
+}
+
 static bool is_lpuart32(struct udevice *dev)
 {
 	struct lpuart_serial_platdata *plat = dev->platdata;
@@ -111,13 +133,19 @@ static bool is_lpuart32(struct udevice *dev)
 	return plat->flags & LPUART_FLAG_REGMAP_32BIT_REG;
 }
 
-static void _lpuart_serial_setbrg(struct lpuart_serial_platdata *plat,
+static void _lpuart_serial_setbrg(struct udevice *dev,
 				  int baudrate)
 {
+	struct lpuart_serial_platdata *plat = dev_get_platdata(dev);
 	struct lpuart_fsl *base = plat->reg;
-	u32 clk = get_lpuart_clk();
+	u32 clk;
 	u16 sbr;
 
+	if (IS_ENABLED(CONFIG_CLK))
+		clk = get_lpuart_clk_rate(dev);
+	else
+		clk = get_lpuart_clk();
+
 	sbr = (u16)(clk / (16 * baudrate));
 
 	/* place adjustment later - n/32 BRFA */
@@ -162,8 +190,9 @@ static int _lpuart_serial_tstc(struct lpuart_serial_platdata *plat)
  * Initialise the serial port with the given baudrate. The settings
  * are always 8 data bits, no parity, 1 stop bit, no start bits.
  */
-static int _lpuart_serial_init(struct lpuart_serial_platdata *plat)
+static int _lpuart_serial_init(struct udevice *dev)
 {
+	struct lpuart_serial_platdata *plat = dev_get_platdata(dev);
 	struct lpuart_fsl *base = (struct lpuart_fsl *)plat->reg;
 	u8 ctrl;
 
@@ -182,19 +211,25 @@ static int _lpuart_serial_init(struct lpuart_serial_platdata *plat)
 	__raw_writeb(CFIFO_TXFLUSH | CFIFO_RXFLUSH, &base->ucfifo);
 
 	/* provide data bits, parity, stop bit, etc */
-	_lpuart_serial_setbrg(plat, gd->baudrate);
+	_lpuart_serial_setbrg(dev, gd->baudrate);
 
 	__raw_writeb(UC2_RE | UC2_TE, &base->uc2);
 
 	return 0;
 }
 
-static void _lpuart32_serial_setbrg_7ulp(struct lpuart_serial_platdata *plat,
+static void _lpuart32_serial_setbrg_7ulp(struct udevice *dev,
 					 int baudrate)
 {
+	struct lpuart_serial_platdata *plat = dev_get_platdata(dev);
 	struct lpuart_fsl_reg32 *base = plat->reg;
 	u32 sbr, osr, baud_diff, tmp_osr, tmp_sbr, tmp_diff, tmp;
-	u32 clk = get_lpuart_clk();
+	u32 clk;
+
+	if (IS_ENABLED(CONFIG_CLK))
+		clk = get_lpuart_clk_rate(dev);
+	else
+		clk = get_lpuart_clk();
 
 	baud_diff = baudrate;
 	osr = 0;
@@ -248,13 +283,19 @@ static void _lpuart32_serial_setbrg_7ulp(struct lpuart_serial_platdata *plat,
 	out_le32(&base->baud, tmp);
 }
 
-static void _lpuart32_serial_setbrg(struct lpuart_serial_platdata *plat,
+static void _lpuart32_serial_setbrg(struct udevice *dev,
 				    int baudrate)
 {
+	struct lpuart_serial_platdata *plat = dev_get_platdata(dev);
 	struct lpuart_fsl_reg32 *base = plat->reg;
-	u32 clk = get_lpuart_clk();
+	u32 clk;
 	u32 sbr;
 
+	if (IS_ENABLED(CONFIG_CLK))
+		clk = get_lpuart_clk_rate(dev);
+	else
+		clk = get_lpuart_clk();
+
 	sbr = (clk / (16 * baudrate));
 
 	/* place adjustment later - n/32 BRFA */
@@ -321,8 +362,9 @@ static int _lpuart32_serial_tstc(struct lpuart_serial_platdata *plat)
  * Initialise the serial port with the given baudrate. The settings
  * are always 8 data bits, no parity, 1 stop bit, no start bits.
  */
-static int _lpuart32_serial_init(struct lpuart_serial_platdata *plat)
+static int _lpuart32_serial_init(struct udevice *dev)
 {
+	struct lpuart_serial_platdata *plat = dev_get_platdata(dev);
 	struct lpuart_fsl_reg32 *base = (struct lpuart_fsl_reg32 *)plat->reg;
 	u32 val, tx_fifo_size;
 
@@ -350,10 +392,10 @@ static int _lpuart32_serial_init(struct lpuart_serial_platdata *plat)
 	lpuart_write32(plat->flags, &base->match, 0);
 
 	if (plat->devtype == DEV_MX7ULP || plat->devtype == DEV_IMX8) {
-		_lpuart32_serial_setbrg_7ulp(plat, gd->baudrate);
+		_lpuart32_serial_setbrg_7ulp(dev, gd->baudrate);
 	} else {
 		/* provide data bits, parity, stop bit, etc */
-		_lpuart32_serial_setbrg(plat, gd->baudrate);
+		_lpuart32_serial_setbrg(dev, gd->baudrate);
 	}
 
 	lpuart_write32(plat->flags, &base->ctrl, CTRL_RE | CTRL_TE);
@@ -363,15 +405,15 @@ static int _lpuart32_serial_init(struct lpuart_serial_platdata *plat)
 
 static int lpuart_serial_setbrg(struct udevice *dev, int baudrate)
 {
-	struct lpuart_serial_platdata *plat = dev->platdata;
+	struct lpuart_serial_platdata *plat = dev_get_platdata(dev);
 
 	if (is_lpuart32(dev)) {
 		if (plat->devtype == DEV_MX7ULP || plat->devtype == DEV_IMX8)
-			_lpuart32_serial_setbrg_7ulp(plat, baudrate);
+			_lpuart32_serial_setbrg_7ulp(dev, baudrate);
 		else
-			_lpuart32_serial_setbrg(plat, baudrate);
+			_lpuart32_serial_setbrg(dev, baudrate);
 	} else {
-		_lpuart_serial_setbrg(plat, baudrate);
+		_lpuart_serial_setbrg(dev, baudrate);
 	}
 
 	return 0;
@@ -423,12 +465,10 @@ static int lpuart_serial_pending(struct udevice *dev, bool input)
 
 static int lpuart_serial_probe(struct udevice *dev)
 {
-	struct lpuart_serial_platdata *plat = dev->platdata;
-
 	if (is_lpuart32(dev))
-		return _lpuart32_serial_init(plat);
+		return _lpuart32_serial_init(dev);
 	else
-		return _lpuart_serial_init(plat);
+		return _lpuart_serial_init(dev);
 }
 
 static int lpuart_serial_ofdata_to_platdata(struct udevice *dev)
-- 
2.14.1



More information about the U-Boot mailing list