[U-Boot] [PATCH 1/3] rtc: rv3029: add to Kconfig

[Heinrich Schuchardt]

On 08/14/2018 11:51 AM, Philipp Tomsich wrote:
> The MicroCrystal RV3029 driver didn't have a Kconfig entry and was not used
> anywhere. Add it to Kconfig to make it selectable.
> 
> Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
> Tested-by: Klaus Goger <klaus.goger at theobroma-systems.com>
> ---
> 
>  drivers/rtc/Kconfig | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index 5436509..8a6e796 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -42,6 +42,16 @@ config RTC_ISL1208
>  	  This driver supports reading and writing the RTC/calendar and detects
>  	  total power failures.
>  
> +config RTC_RV3029
> +	bool "Enable RV3029 driver"
> +	depends on DM_RTC
> +	help
> +	  The MicroCrystal RV3029 is a I2C Real Time Clock (RTC) with 8-byte

%s/a I2C/an I2C/

> +	  battery-backed SRAM.
> +
> +	  This driver supports reading and writing the RTC/calendar and the

What do you mean by calendar? If you just mean the RTC date register,
just drop the misleading word.

%s/RTC\/calendar/RTC/

> +	  battery-baced SRAM section.

%s/baced/backed/

Best regards

Heinrich

> +
>  config RTC_RX8010SJ
>  	bool "Enable RX8010SJ driver"
>  	depends on DM_RTC
>