[U-Boot] [PATCH 1/3] rtc: rv3029: add to Kconfig

[Dr. Philipp Tomsich]

> On 14 Aug 2018, at 18:46, Heinrich Schuchardt <xypron.glpk at gmx.de> wrote:
> 
> On 08/14/2018 11:51 AM, Philipp Tomsich wrote:
>> The MicroCrystal RV3029 driver didn't have a Kconfig entry and was not used
>> anywhere. Add it to Kconfig to make it selectable.
>> 
>> Signed-off-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
>> Tested-by: Klaus Goger <klaus.goger at theobroma-systems.com>
>> ---
>> 
>> drivers/rtc/Kconfig | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>> 
>> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
>> index 5436509..8a6e796 100644
>> --- a/drivers/rtc/Kconfig
>> +++ b/drivers/rtc/Kconfig
>> @@ -42,6 +42,16 @@ config RTC_ISL1208
>> 	  This driver supports reading and writing the RTC/calendar and detects
>> 	  total power failures.
>> 
>> +config RTC_RV3029
>> +	bool "Enable RV3029 driver"
>> +	depends on DM_RTC
>> +	help
>> +	  The MicroCrystal RV3029 is a I2C Real Time Clock (RTC) with 8-byte
> 
> %s/a I2C/an I2C/
> 
>> +	  battery-backed SRAM.
>> +
>> +	  This driver supports reading and writing the RTC/calendar and the
> 
> What do you mean by calendar? If you just mean the RTC date register,
> just drop the misleading word.
> 
> %s/RTC\/calendar/RTC/

The RV3029 datasheet also describes the devices as a RTC/calendar:
	"The RV-3029 is a CMOS low power, real-time clock/calendar module…”

In the same Kconfig, there’s the same duality (i.e. RTC _and_ calendar) in the
help text for the
	RTC_PCF2127
	RTC_ISL1208
	
Happy to drop this here, if that’s the consensus...

> 
>> +	  battery-baced SRAM section.
> 
> %s/baced/backed/
> 
> Best regards
> 
> Heinrich
> 
>> +
>> config RTC_RX8010SJ
>> 	bool "Enable RX8010SJ driver"
>> 	depends on DM_RTC
>> 
>