[U-Boot] [PATCH v5 2/2] rockchip: add fit source file for pack itb with op-tee

[Kever Yang]

We package U-Boot and OP-TEE into one itb file for SPL,
so that we can support OP-TEE in SPL.

Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich at theobroma-systems.com>
---

Changes in v5:
- use 'tee' instead of 'op-tee' as os type

Changes in v4: None
Changes in v2:
- Make the its as common file used for all armv7 with op-tee

 arch/arm/mach-rockchip/fit_spl_optee.its | 50 ++++++++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 arch/arm/mach-rockchip/fit_spl_optee.its

diff --git a/arch/arm/mach-rockchip/fit_spl_optee.its b/arch/arm/mach-rockchip/fit_spl_optee.its
new file mode 100644
index 0000000000..9be4b3c8d2
--- /dev/null
+++ b/arch/arm/mach-rockchip/fit_spl_optee.its
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2017 Rockchip Electronic Co.,Ltd
+ *
+ * Simple U-boot fit source file containing U-Boot, dtb and optee
+ */
+
+/dts-v1/;
+
+/ {
+	description = "Simple image with OP-TEE support";
+	#address-cells = <1>;
+
+	images {
+		uboot at 1 {
+			description = "U-Boot";
+			data = /incbin/("../../../u-boot-nodtb.bin");
+			type = "standalone";
+			os = "U-Boot";
+			arch = "arm";
+			compression = "none";
+			load = <0x61000000>;
+		};
+		optee at 1 {
+			description = "OP-TEE";
+			data = /incbin/("../../../tee.bin");
+			type = "firmware";
+			arch = "arm";
+			os = "tee";
+			compression = "none";
+			load = <0x68400000>;
+			entry = <0x68400000>;
+		};
+		fdt at 1 {
+			description = "dtb";
+			data = /incbin/("../../../u-boot.dtb");
+			type = "flat_dt";
+			compression = "none";
+		};
+	};
+
+	configurations {
+		default = "conf at 1";
+		conf at 1 {
+			description = "Rockchip armv7 with OP-TEE";
+			firmware = "optee at 1";
+			loadables = "uboot at 1";
+			fdt = "fdt at 1";
+		};
+	};
+};
-- 
2.18.0