[U-Boot] [PATCH v2 23/24] mmc: k3_arasan: Add sdhci driver support for K3 family SoCs

[Lokesh Vutla]

AM654 has an arasan sdhci controller and a mmc phy attached to it.
Add basic support for K3 specific arasan sdhci controller.

Cc: Jaehoon Chung <jh80.chung at samsung.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
 drivers/mmc/Kconfig          |   9 +++
 drivers/mmc/Makefile         |   1 +
 drivers/mmc/k3_arsan_sdhci.c | 109 +++++++++++++++++++++++++++++++++++
 3 files changed, 119 insertions(+)
 create mode 100644 drivers/mmc/k3_arsan_sdhci.c

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 377b1c4b3b..27dfccb9b2 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -402,6 +402,15 @@ config MMC_SDHCI_CADENCE
 
 	  If unsure, say N.
 
+config MMC_SDHCI_K3_ARASAN
+	bool "Arasan SDHCI controller for TI's K3 based SoCs"
+	depends on ARCH_K3
+	depends on MMC_SDHCI
+	depends on DM_MMC && OF_CONTROL && BLK
+	help
+	  Support for Arasan SDHCI host controller on Texas Instruments'
+	  K3 family based SoC platforms
+
 config MMC_SDHCI_KONA
 	bool "SDHCI support on Broadcom KONA platform"
 	depends on MMC_SDHCI
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index f6191862d6..23c5b0daef 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_MMC_SDHCI_ATMEL)		+= atmel_sdhci.o
 obj-$(CONFIG_MMC_SDHCI_BCM2835)		+= bcm2835_sdhci.o
 obj-$(CONFIG_MMC_SDHCI_BCMSTB)		+= bcmstb_sdhci.o
 obj-$(CONFIG_MMC_SDHCI_CADENCE)		+= sdhci-cadence.o
+obj-$(CONFIG_MMC_SDHCI_K3_ARASAN)	+= k3_arsan_sdhci.o
 obj-$(CONFIG_MMC_SDHCI_KONA)		+= kona_sdhci.o
 obj-$(CONFIG_MMC_SDHCI_MSM)		+= msm_sdhci.o
 obj-$(CONFIG_MMC_SDHCI_MV)		+= mv_sdhci.o
diff --git a/drivers/mmc/k3_arsan_sdhci.c b/drivers/mmc/k3_arsan_sdhci.c
new file mode 100644
index 0000000000..d5f2857382
--- /dev/null
+++ b/drivers/mmc/k3_arsan_sdhci.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Texas Instruments' K3 SD Host Controller Interface
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <dm.h>
+#include <malloc.h>
+#include <power-domain.h>
+#include <sdhci.h>
+
+#define K3_ARASAN_SDHCI_MIN_FREQ	0
+
+struct k3_arasan_sdhci_plat {
+	struct mmc_config cfg;
+	struct mmc mmc;
+	unsigned int f_max;
+};
+
+static int k3_arasan_sdhci_probe(struct udevice *dev)
+{
+	struct k3_arasan_sdhci_plat *plat = dev_get_platdata(dev);
+	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+	struct sdhci_host *host = dev_get_priv(dev);
+	struct power_domain sdhci_pwrdmn;
+	struct clk clk;
+	unsigned long clock;
+	int ret;
+
+	ret = power_domain_get_by_index(dev, &sdhci_pwrdmn, 0);
+	if (ret) {
+		dev_err(dev, "failed to get power domain\n");
+		return ret;
+	}
+
+	ret = power_domain_on(&sdhci_pwrdmn);
+	if (ret) {
+		dev_err(dev, "Power domain on failed\n");
+		return ret;
+	}
+
+	ret = clk_get_by_index(dev, 0, &clk);
+	if (ret) {
+		dev_err(dev, "failed to get clock\n");
+		return ret;
+	}
+
+	clock = clk_get_rate(&clk);
+	if (IS_ERR_VALUE(clock)) {
+		dev_err(dev, "failed to get rate\n");
+		return clock;
+	}
+
+	host->quirks = SDHCI_QUIRK_WAIT_SEND_CMD |
+		       SDHCI_QUIRK_BROKEN_R1B;
+
+	host->max_clk = clock;
+
+	ret = sdhci_setup_cfg(&plat->cfg, host, plat->f_max,
+			      K3_ARASAN_SDHCI_MIN_FREQ);
+	host->mmc = &plat->mmc;
+	if (ret)
+		return ret;
+	host->mmc->priv = host;
+	host->mmc->dev = dev;
+	upriv->mmc = host->mmc;
+
+	return sdhci_probe(dev);
+}
+
+static int k3_arasan_sdhci_ofdata_to_platdata(struct udevice *dev)
+{
+	struct k3_arasan_sdhci_plat *plat = dev_get_platdata(dev);
+	struct sdhci_host *host = dev_get_priv(dev);
+
+	host->name = dev->name;
+	host->ioaddr = (void *)dev_read_addr(dev);
+	host->bus_width = dev_read_u32_default(dev, "bus-width", 4);
+	plat->f_max = dev_read_u32_default(dev, "max-frequency", 0);
+
+	return 0;
+}
+
+static int k3_arasan_sdhci_bind(struct udevice *dev)
+{
+	struct k3_arasan_sdhci_plat *plat = dev_get_platdata(dev);
+
+	return sdhci_bind(dev, &plat->mmc, &plat->cfg);
+}
+
+static const struct udevice_id k3_arasan_sdhci_ids[] = {
+	{ .compatible = "arasan,sdhci-5.1" },
+	{ }
+};
+
+U_BOOT_DRIVER(k3_arasan_sdhci_drv) = {
+	.name		= "k3_arasan_sdhci",
+	.id		= UCLASS_MMC,
+	.of_match	= k3_arasan_sdhci_ids,
+	.ofdata_to_platdata = k3_arasan_sdhci_ofdata_to_platdata,
+	.ops		= &sdhci_ops,
+	.bind		= k3_arasan_sdhci_bind,
+	.probe		= k3_arasan_sdhci_probe,
+	.priv_auto_alloc_size = sizeof(struct sdhci_host),
+	.platdata_auto_alloc_size = sizeof(struct k3_arasan_sdhci_plat),
+};
-- 
2.18.0