[U-Boot] [PATCH v2 30/30] ARM: dts: at91: sama5d2_ptc: add onewire connector for LCD eeprom

[Eugen Hristev]

Add onewire node in device tree for TM series LCDs

Signed-off-by: Eugen Hristev <eugen.hristev at microchip.com>
---
 arch/arm/dts/at91-sama5d2_ptc_ek.dts | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/arch/arm/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/dts/at91-sama5d2_ptc_ek.dts
index ab5ab21..068a117 100644
--- a/arch/arm/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/dts/at91-sama5d2_ptc_ek.dts
@@ -56,6 +56,18 @@
 		stdout-path = &uart0;
 	};
 
+	onewire_tm: onewire {
+		gpios = <&pioA PIN_PB31 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_onewire_tm_default>;
+		status = "okay";
+
+		w1_eeprom: w1_eeprom at 0 {
+			compatible = "maxim,ds24b33";
+			status = "okay";
+		};
+	};
+
 	ahb {
 		usb0: gadget at 00300000 {
 			atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
@@ -208,6 +220,11 @@
 						pinmux = <PIN_PB11__GPIO>;
 						bias-disable;
 					};
+
+					pinctrl_onewire_tm_default: onewire_tm_default {
+						pinmux = <PIN_PB31__GPIO>;
+						bias-pull-up;
+					};
 				};
 			};
 		};
-- 
2.7.4