[U-Boot] [RFC 1/3] test/py: convert fs-test.sh to pytest
AKASHI Takahiro
takahiro.akashi at linaro.org
Thu Aug 30 06:52:46 UTC 2018
On Wed, Aug 29, 2018 at 11:36:51PM +0200, Heinrich Schuchardt wrote:
> On 08/23/2018 09:25 AM, AKASHI Takahiro wrote:
> > In this commit, the same set of test cases as in test/fs/fs-test.sh
> > is provided using pytest framework.
> > Actually, fs-test.sh provides three variants:"sb" (sb command), "nonfs"
> > (fatxx and etc.) and "fs" (hostfs), and this patch currently supports
> > only "nonfs" variant; So it is not a replacement of fs-test.sh for now.
> >
> > Simple usage:
> > $ py.test test/py/tests/test_fs [<other options>]
> >
> > You may also specify filesystem types to be tested:
> > $ py.test test/py/tests/test_fs --fs-type fat32 [<other options>]
> >
> > Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
> > ---
> > test/py/tests/test_fs/conftest.py | 175 +++++++++++++++++++
> > test/py/tests/test_fs/fstest_defs.py | 10 ++
> > test/py/tests/test_fs/test_basic.py | 246 +++++++++++++++++++++++++++
> > 3 files changed, 431 insertions(+)
> > create mode 100644 test/py/tests/test_fs/conftest.py
> > create mode 100644 test/py/tests/test_fs/fstest_defs.py
> > create mode 100644 test/py/tests/test_fs/test_basic.py
> >
> > diff --git a/test/py/tests/test_fs/conftest.py b/test/py/tests/test_fs/conftest.py
> > new file mode 100644
> > index 000000000000..fefeb4c9663f
> > --- /dev/null
> > +++ b/test/py/tests/test_fs/conftest.py
> > @@ -0,0 +1,175 @@
> > +# SPDX-License-Identifier: GPL-2.0+
> > +# Copyright (c) 2018, Linaro Limited
> > +# Author: Takahiro Akashi <takahiro.akashi at linaro.org>
> > +
> > +import pytest
> > +import re
> > +from subprocess import call, check_call, check_output, CalledProcessError
> > +from fstest_defs import *
> > +
> > +supported_fs_basic = ['fat16', 'fat32', 'ext4']
> > +
> > +#
> > +# Filesystem test specific setup
> > +#
> > +def pytest_addoption(parser):
> > + parser.addoption('--fs-type', action='append', default=None,
> > + help='Targeting Filesystem Types')
> > +
> > +def pytest_configure(config):
> > + global supported_fs_basic
> > +
> > + def intersect(listA, listB):
> > + return [x for x in listA if x in listB]
> > +
> > + supported_fs = config.getoption('fs_type')
> > + if supported_fs:
> > + print("*** FS TYPE modified: %s" % supported_fs)
> > + supported_fs_basic = intersect(supported_fs, supported_fs_basic)
> > +
> > +def pytest_generate_tests(metafunc):
> > + if 'fs_obj_basic' in metafunc.fixturenames:
> > + metafunc.parametrize('fs_obj_basic', supported_fs_basic,
> > + indirect=True, scope='module')
> > +
> > +#
> > +# Helper functions
> > +#
> > +def fstype_to_ubname(fs_type):
> > + if re.match('fat', fs_type):
> > + return 'fat'
> > + else:
> > + return fs_type
> > +
> > +def check_ubconfig(config, fs_type):
> > + if not config.buildconfig.get('config_cmd_%s' % fs_type, None):
> > + pytest.skip('.config feature "CMD_%s" not enabled' % fs_type.upper())
> > + if not config.buildconfig.get('config_%s_write' % fs_type, None):
> > + pytest.skip('.config feature "%s_WRITE" not enabled'
> > + % fs_type.upper())
> > +
> > +def mk_fs(config, fs_type, size, id):
> > + fs_img = '%s.%s.img' % (id, fs_type)
> > + fs_img = config.persistent_data_dir + '/' + fs_img
> > +
> > + if fs_type == 'fat16':
> > + mkfs_opt = '-F 16'
> > + elif fs_type == 'fat32':
> > + mkfs_opt = '-F 32'
> > + else:
> > + mkfs_opt = ''
> > +
> > + if re.match('fat', fs_type):
> > + fs_lnxtype = 'vfat'
> > + else:
> > + fs_lnxtype = fs_type
> > +
> > + count = (size + 1023) / 1024
> > +
> > + try:
> > + check_call('rm -f %s' % fs_img, shell=True)
> > + check_call('dd if=/dev/zero of=%s bs=1K count=%d'
> > + % (fs_img, count), shell=True)
> > + check_call('mkfs.%s %s %s'
> > + % (fs_lnxtype, mkfs_opt, fs_img), shell=True)
> > + return fs_img
> > + except CalledProcessError:
> > + call('rm -f %s' % fs_img, shell=True)
> > + raise
> > +
> > +#
> > +# Fixture for basic fs test
> > +# derived from test/fs/fs-test.sh
> > +#
> > +# NOTE: yield_fixture was deprecated since pytest-3.0
> > + at pytest.yield_fixture()
> > +def fs_obj_basic(request, u_boot_config):
> > + fs_type = request.param
> > + fs_img = ''
> > +
> > + fs_ubtype = fstype_to_ubname(fs_type)
> > + check_ubconfig(u_boot_config, fs_ubtype)
> > +
> > + mount_dir = u_boot_config.persistent_data_dir + '/mnt'
> > + small_file = mount_dir + '/' + SMALL_FILE
> > + big_file = mount_dir + '/' + BIG_FILE
> > + try:
> > +
> > + # 3GiB volume
> > + fs_img = mk_fs(u_boot_config, fs_type, 0xc0000000, '3GB')
> > +
> > + # Mount the image so we can populate it.
> > + check_call('mkdir -p %s' % mount_dir, shell=True)
> > + check_call('sudo mount -o loop,rw %s %s'
> > + % (fs_img, mount_dir), shell=True)
>
> Should I grant sudo to anybody who can commit to U-Boot?
I don't get your point.
I think using "sudo" solely in testing should be allowed.
> Just use exfat-fuse and fuse2fs.
It will not be a good idea to use those tools which are not
provided in every distribution.
I'd like to leave "sudo mount" statement as a backstop.
> > +
> > + # Create a subdirectory.
> > + check_call('sudo mkdir %s/SUBDIR' % mount_dir, shell=True)
> > +
> > + # Create big file in this image.
> > + # Note that we work only on the start 1MB, couple MBs in the 2GB range
> > + # and the last 1 MB of the huge 2.5GB file.
> > + # So, just put random values only in those areas.
> > + check_call('sudo dd if=/dev/urandom of=%s bs=1M count=1'
> > + % big_file, shell=True)
>
>
> No need to use sudo to create a file.
Along with a change above, succeeding "sudo's" will be removed.
Thanks,
-Takahiro AKASHI
> Best regards
>
> Heinrich
>
> > + check_call('sudo dd if=/dev/urandom of=%s bs=1M count=2 seek=2047'
> > + % big_file, shell=True)
> > + check_call('sudo dd if=/dev/urandom of=%s bs=1M count=1 seek=2499'
> > + % big_file, shell=True)
> > +
> > + # Create a small file in this image.
> > + check_call('sudo dd if=/dev/urandom of=%s bs=1M count=1'
> > + % small_file, shell=True)
> > +
> > + # Delete the small file copies which possibly are written as part of a
> > + # previous test.
> > + # check_call('sudo rm -f "%s.w"' % MB1, shell=True)
> > + # check_call('sudo rm -f "%s.w2"' % MB1, shell=True)
> > +
> > + # Generate the md5sums of reads that we will test against small file
> > + out = check_output(
> > + 'dd if=%s bs=1M skip=0 count=1 2> /dev/null | md5sum'
> > + % small_file, shell=True)
> > + md5val = [ out.split()[0] ]
> > +
> > + # Generate the md5sums of reads that we will test against big file
> > + # One from beginning of file.
> > + out = check_output(
> > + 'dd if=%s bs=1M skip=0 count=1 2> /dev/null | md5sum'
> > + % big_file, shell=True)
> > + md5val.append(out.split()[0])
> > +
> > + # One from end of file.
> > + out = check_output(
> > + 'dd if=%s bs=1M skip=2499 count=1 2> /dev/null | md5sum'
> > + % big_file, shell=True)
> > + md5val.append(out.split()[0])
> > +
> > + # One from the last 1MB chunk of 2GB
> > + out = check_output(
> > + 'dd if=%s bs=1M skip=2047 count=1 2> /dev/null | md5sum'
> > + % big_file, shell=True)
> > + md5val.append(out.split()[0])
> > +
> > + # One from the start 1MB chunk from 2GB
> > + out = check_output(
> > + 'dd if=%s bs=1M skip=2048 count=1 2> /dev/null | md5sum'
> > + % big_file, shell=True)
> > + md5val.append(out.split()[0])
> > +
> > + # One 1MB chunk crossing the 2GB boundary
> > + out = check_output(
> > + 'dd if=%s bs=512K skip=4095 count=2 2> /dev/null | md5sum'
> > + % big_file, shell=True)
> > + md5val.append(out.split()[0])
> > +
> > + check_call('sudo umount %s' % mount_dir, shell=True)
> > + except CalledProcessError:
> > + pytest.skip('Setup failed for filesystem: ' + fs_type)
> > + else:
> > + yield [fs_ubtype, fs_img, md5val]
> > + finally:
> > + call('sudo umount %s' % mount_dir, shell=True)
> > + call('rmdir -rf %s' % mount_dir, shell=True)
> > +# if fs_img:
> > +# call('rm -f %s' % fs_img, shell=True)
> > diff --git a/test/py/tests/test_fs/fstest_defs.py b/test/py/tests/test_fs/fstest_defs.py
> > new file mode 100644
> > index 000000000000..f26dd06cacf2
> > --- /dev/null
> > +++ b/test/py/tests/test_fs/fstest_defs.py
> > @@ -0,0 +1,10 @@
> > +# SPDX-License-Identifier: GPL-2.0+
> > +
> > +# $SMALL_FILE is the name of the 1MB file in the file system image
> > +SMALL_FILE='1MB.file'
> > +
> > +# $BIG_FILE is the name of the 2.5GB file in the file system image
> > +BIG_FILE='2.5GB.file'
> > +
> > +ADDR=0x01000008
> > +LENGTH=0x00100000
> > diff --git a/test/py/tests/test_fs/test_basic.py b/test/py/tests/test_fs/test_basic.py
> > new file mode 100644
> > index 000000000000..5258d98d42a9
> > --- /dev/null
> > +++ b/test/py/tests/test_fs/test_basic.py
> > @@ -0,0 +1,246 @@
> > +# SPDX-License-Identifier: GPL-2.0+
> > +# Copyright (c) 2018, Linaro Limited
> > +# Author: Takahiro Akashi <takahiro.akashi at linaro.org>
> > +#
> > +# U-Boot File System:Basic Test
> > +
> > +"""
> > +This test verifies basic read/write operation on file system.
> > +"""
> > +
> > +import pytest
> > +import re
> > +from fstest_defs import *
> > +
> > + at pytest.mark.boardspec('sandbox')
> > +class TestFsBasic(object):
> > + def test_fs1(self, u_boot_console, fs_obj_basic):
> > + fs_type,fs_img,md5val = fs_obj_basic
> > + with u_boot_console.log.section('Test Case 1 - ls'):
> > + # Test Case 1 - ls
> > + output = u_boot_console.run_command_list([
> > + 'host bind 0 %s' % fs_img,
> > + '%sls host 0:0' % fs_type])
> > + assert(re.search('2621440000 *%s' % BIG_FILE, ''.join(output)))
> > + assert(re.search('1048576 *%s' % SMALL_FILE, ''.join(output)))
> > +
> > + # In addition, test with a nonexistent directory to see if we crash.
> > + output2 = u_boot_console.run_command(
> > + '%sls host 0:0 invalid_d' % fs_type)
> > + if fs_type == 'ext4':
> > + assert('Can not find directory' in output2)
> > + else:
> > + assert('' == output2)
> > +
> > + def test_fs2(self, u_boot_console, fs_obj_basic):
> > + fs_type,fs_img,md5val = fs_obj_basic
> > + with u_boot_console.log.section('Test Case 2 - size (small)'):
> > + # 1MB is 0x0010 0000
> > + # Test Case 2a - size of small file
> > + output = u_boot_console.run_command_list([
> > + 'host bind 0 %s' % fs_img,
> > + '%ssize host 0:0 /%s' % (fs_type, SMALL_FILE),
> > + 'printenv filesize',
> > + 'setenv filesize'])
> > + assert('filesize=100000' in ''.join(output))
> > +
> > + # Test Case 2b - size of small file via a path using '..'
> > + output = u_boot_console.run_command_list([
> > + '%ssize host 0:0 /SUBDIR/../%s' % (fs_type, SMALL_FILE),
> > + 'printenv filesize',
> > + 'setenv filesize'])
> > + assert('filesize=100000' in ''.join(output))
> > +
> > + def test_fs3(self, u_boot_console, fs_obj_basic):
> > + fs_type,fs_img,md5val = fs_obj_basic
> > + with u_boot_console.log.section('Test Case 3 - size (big)'):
> > + # 2.5GB (1024*1024*2500) is 0x9C40 0000
> > + # Test Case 3 - size of big file
> > + output = u_boot_console.run_command_list([
> > + 'host bind 0 %s' % fs_img,
> > + '%ssize host 0:0 /%s' % (fs_type, BIG_FILE),
> > + 'printenv filesize',
> > + 'setenv filesize'])
> > + assert('filesize=9c400000' in ''.join(output))
> > +
> > + def test_fs4(self, u_boot_console, fs_obj_basic):
> > + fs_type,fs_img,md5val = fs_obj_basic
> > + with u_boot_console.log.section('Test Case 4 - load (small)'):
> > + # Test Case 4a - Read full 1MB of small file
> > + output = u_boot_console.run_command_list([
> > + 'host bind 0 %s' % fs_img,
> > + '%sload host 0:0 %x /%s' % (fs_type, ADDR, SMALL_FILE),
> > + 'printenv filesize'])
> > + assert('filesize=100000' in ''.join(output))
> > +
> > + # Test Case 4b - Read full 1MB of small file
> > + output = u_boot_console.run_command_list([
> > + 'md5sum %x $filesize' % ADDR,
> > + 'setenv filesize'])
> > + assert(md5val[0] in ''.join(output))
> > +
> > + def test_fs5(self, u_boot_console, fs_obj_basic):
> > + fs_type,fs_img,md5val = fs_obj_basic
> > + with u_boot_console.log.section('Test Case 5 - load (big)'):
> > + # Test Case 5a - First 1MB of big file
> > + output = u_boot_console.run_command_list([
> > + 'host bind 0 %s' % fs_img,
> > + '%sload host 0:0 %x /%s %x 0x0' % (fs_type, ADDR, BIG_FILE, LENGTH),
> > + 'printenv filesize'])
> > + assert('filesize=100000' in ''.join(output))
> > +
> > + # Test Case 5b - First 1MB of big file
> > + output = u_boot_console.run_command_list([
> > + 'md5sum %x $filesize' % ADDR,
> > + 'setenv filesize'])
> > + assert(md5val[1] in ''.join(output))
> > +
> > + def test_fs6(self, u_boot_console, fs_obj_basic):
> > + fs_type,fs_img,md5val = fs_obj_basic
> > + with u_boot_console.log.section('Test Case 6 - load (big from last 1MB)'):
> > + # fails for ext as no offset support
> > + # Test Case 6a - Last 1MB of big file
> > + output = u_boot_console.run_command_list([
> > + 'host bind 0 %s' % fs_img,
> > + '%sload host 0:0 %x /%s %x 0x9c300000'
> > + % (fs_type, ADDR, BIG_FILE, LENGTH),
> > + 'printenv filesize'])
> > + assert('filesize=100000' in ''.join(output))
> > +
> > + # Test Case 6b - Last 1MB of big file
> > + output = u_boot_console.run_command_list([
> > + 'md5sum %x $filesize' % ADDR,
> > + 'setenv filesize'])
> > + assert(md5val[2] in ''.join(output))
> > +
> > + def test_fs7(self, u_boot_console, fs_obj_basic):
> > + fs_type,fs_img,md5val = fs_obj_basic
> > + with u_boot_console.log.section('Test Case 7 - load (big from last 1MB in 2GB)'):
> > + # fails for ext as no offset support
> > + # Test Case 7a - One from the last 1MB chunk of 2GB
> > + output = u_boot_console.run_command_list([
> > + 'host bind 0 %s' % fs_img,
> > + '%sload host 0:0 %x /%s %x 0x7ff00000'
> > + % (fs_type, ADDR, BIG_FILE, LENGTH),
> > + 'printenv filesize'])
> > + assert('filesize=100000' in ''.join(output))
> > +
> > + # Test Case 7b - One from the last 1MB chunk of 2GB
> > + output = u_boot_console.run_command_list([
> > + 'md5sum %x $filesize' % ADDR,
> > + 'setenv filesize'])
> > + assert(md5val[3] in ''.join(output))
> > +
> > + def test_fs8(self, u_boot_console, fs_obj_basic):
> > + fs_type,fs_img,md5val = fs_obj_basic
> > + with u_boot_console.log.section('Test Case 8 - load (big from first 1MB in 2GB)'):
> > + # fails for ext as no offset support
> > + # Test Case 8a - One from the start 1MB chunk from 2GB
> > + output = u_boot_console.run_command_list([
> > + 'host bind 0 %s' % fs_img,
> > + '%sload host 0:0 %x /%s %x 0x80000000'
> > + % (fs_type, ADDR, BIG_FILE, LENGTH),
> > + 'printenv filesize'])
> > + assert('filesize=100000' in ''.join(output))
> > +
> > + # Test Case 8b - One from the start 1MB chunk from 2GB
> > + output = u_boot_console.run_command_list([
> > + 'md5sum %x $filesize' % ADDR,
> > + 'setenv filesize'])
> > + assert(md5val[4] in ''.join(output))
> > +
> > + def test_fs9(self, u_boot_console, fs_obj_basic):
> > + fs_type,fs_img,md5val = fs_obj_basic
> > + with u_boot_console.log.section('Test Case 9 - load (crossing 2GB boundary)'):
> > + # fails for ext as no offset support
> > + # Test Case 9a - One 1MB chunk crossing the 2GB boundary
> > + output = u_boot_console.run_command_list([
> > + 'host bind 0 %s' % fs_img,
> > + '%sload host 0:0 %x /%s %x 0x7ff80000'
> > + % (fs_type, ADDR, BIG_FILE, LENGTH),
> > + 'printenv filesize'])
> > + assert('filesize=100000' in ''.join(output))
> > +
> > + # Test Case 9b - One 1MB chunk crossing the 2GB boundary
> > + output = u_boot_console.run_command_list([
> > + 'md5sum %x $filesize' % ADDR,
> > + 'setenv filesize'])
> > + assert(md5val[5] in ''.join(output))
> > +
> > + def test_fs10(self, u_boot_console, fs_obj_basic):
> > + fs_type,fs_img,md5val = fs_obj_basic
> > + with u_boot_console.log.section('Test Case 10 - load (over file end)'):
> > + # Generic failure case
> > + # Test Case 10 - 2MB chunk from the last 1MB of big file
> > + output = u_boot_console.run_command_list([
> > + 'host bind 0 %s' % fs_img,
> > + '%sload host 0:0 %x /%s 0x00200000 0x9c300000'
> > + % (fs_type, ADDR, BIG_FILE),
> > + 'printenv filesize',
> > + 'md5sum %x $filesize' % ADDR,
> > + 'setenv filesize'])
> > + assert('filesize=100000' in ''.join(output))
> > +
> > + def test_fs11(self, u_boot_console, fs_obj_basic):
> > + fs_type,fs_img,md5val = fs_obj_basic
> > + with u_boot_console.log.section('Test Case 11 - write (small)'):
> > + # Read 1MB from small file
> > + # Write it back to test the writes
> > + # Test Case 11a - Check that the write succeeded
> > + output = u_boot_console.run_command_list([
> > + 'host bind 0 %s' % fs_img,
> > + '%sload host 0:0 %x /%s' % (fs_type, ADDR, SMALL_FILE),
> > + '%swrite host 0:0 %x /%s.w $filesize'
> > + % (fs_type, ADDR, SMALL_FILE)])
> > + assert('1048576 bytes written' in ''.join(output))
> > +
> > + # Test Case 11b - Check md5 of written to is same
> > + # as the one read from
> > + output = u_boot_console.run_command_list([
> > + '%sload host 0:0 %x /%s.w' % (fs_type, ADDR, SMALL_FILE),
> > + 'md5sum %x $filesize' % ADDR,
> > + 'setenv filesize'])
> > + assert(md5val[0] in ''.join(output))
> > +
> > + def test_fs12(self, u_boot_console, fs_obj_basic):
> > + fs_type,fs_img,md5val = fs_obj_basic
> > + with u_boot_console.log.section('Test Case 12 - write (".")'):
> > + # Next test case checks writing a file whose dirent
> > + # is the first in the block, which is always true for "."
> > + # The write should fail, but the lookup should work
> > + # Test Case 12 - Check directory traversal
> > + output = u_boot_console.run_command_list([
> > + 'host bind 0 %s' % fs_img,
> > + '%swrite host 0:0 %x /. 0x10' % (fs_type, ADDR)])
> > + assert('Unable to write' in ''.join(output))
> > +
> > + def test_fs13(self, u_boot_console, fs_obj_basic):
> > + fs_type,fs_img,md5val = fs_obj_basic
> > + with u_boot_console.log.section('Test Case 13 - write (small w/ "./")'):
> > + # Read 1MB from small file
> > + # Write it via "same directory", i.e. "." dirent
> > + # Test Case 13a - Check directory traversal
> > + output = u_boot_console.run_command_list([
> > + 'host bind 0 %s' % fs_img,
> > + '%sload host 0:0 %x /%s' % (fs_type, ADDR, SMALL_FILE),
> > + '%swrite host 0:0 %x /./%s2 $filesize'
> > + % (fs_type, ADDR, SMALL_FILE)])
> > + assert('1048576 bytes written' in ''.join(output))
> > +
> > + # Test Case 13b - Check md5 of written to is same
> > + # as the one read from
> > + output = u_boot_console.run_command_list([
> > + 'mw.b %x 00 100' % ADDR,
> > + '%sload host 0:0 %x /./%s2' % (fs_type, ADDR, SMALL_FILE),
> > + 'md5sum %x $filesize' % ADDR,
> > + 'setenv filesize'])
> > + assert(md5val[0] in ''.join(output))
> > +
> > + # Test Case 13c - Check md5 of written to is same
> > + # as the one read from
> > + output = u_boot_console.run_command_list([
> > + 'mw.b %x 00 100' % ADDR,
> > + '%sload host 0:0 %x /%s2' % (fs_type, ADDR, SMALL_FILE),
> > + 'md5sum %x $filesize' % ADDR,
> > + 'setenv filesize'])
> > + assert(md5val[0] in ''.join(output))
> >
>
More information about the U-Boot
mailing list