[U-Boot] [PATCH 1/8] arm: K3: Add initial support for TI's K3 generation of SoCs

[Tom Rini]

On Tue, Aug 21, 2018 at 08:00:48PM +0530, Lokesh Vutla wrote:

> Add support for Texas Instruments' K3 Generation Processor
> families.
[snip]
> diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
> index 9c80090aa7..f48d82f051 100644
> --- a/drivers/serial/ns16550.c
> +++ b/drivers/serial/ns16550.c
> @@ -175,7 +175,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
>  		;
>  
>  	serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
> -#if defined(CONFIG_ARCH_OMAP2PLUS)
> +#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_ARCH_K3)
>  	serial_out(0x7, &com_port->mdr1);	/* mode select reset TL16C750*/
>  #endif
>  
> @@ -183,7 +183,8 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
>  	serial_out(ns16550_getfcr(com_port), &com_port->fcr);
>  	if (baud_divisor != -1)
>  		NS16550_setbrg(com_port, baud_divisor);
> -#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX)
> +#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX) || \
> +	defined(CONFIG_ARCH_K3)
>  	/* /16 is proper to hit 115200 with 48MHz */
>  	serial_out(0, &com_port->mdr1);
>  #endif

K3 would also be using CONFIG_OMAP_SERIAL once
https://patchwork.ozlabs.org/patch/956252/ is applied (which I'll do in
the next release) yes?  I think 956252 needs a follow-up that changes
the above hunks to be testing off CONFIG_OMAP_SERIAL instead so this
part of the series just becomes changing the default y line for
OMAP_SERIAL.

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180824/86b71186/attachment.sig>