[U-Boot] [PATCH v3 45/58] spi: Add Allwinner A31 SPI driver
Jagan Teki
jagan at amarulasolutions.com
Sun Aug 19 13:57:02 UTC 2018
Add Allwinner sun6i SPI driver for A31, H3/H5 an A64.
Tested-by: Fahad Sadah <fahad at sadah.uk>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
drivers/spi/Kconfig | 6 +
drivers/spi/Makefile | 1 +
drivers/spi/sun6i_spi.c | 475 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 482 insertions(+)
create mode 100644 drivers/spi/sun6i_spi.c
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index dcd719ff0a..671658dddc 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -179,6 +179,12 @@ config SUN4I_SPI
help
SPI driver for Allwinner sun4i, sun5i and sun7i SoCs
+config SUN6I_SPI
+ bool "Allwinner A31 SPI controller"
+ depends on ARCH_SUNXI
+ help
+ This enables using the SPI controller on the Allwinner A31 SoCs.
+
config TEGRA114_SPI
bool "nVidia Tegra114 SPI driver"
help
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 728e30c538..6e60091bc1 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_SH_SPI) += sh_spi.o
obj-$(CONFIG_SH_QSPI) += sh_qspi.o
obj-$(CONFIG_STM32_QSPI) += stm32_qspi.o
obj-$(CONFIG_SUN4I_SPI) += sun4i_spi.o
+obj-$(CONFIG_SUN6I_SPI) += sun6i_spi.o
obj-$(CONFIG_TEGRA114_SPI) += tegra114_spi.o
obj-$(CONFIG_TEGRA20_SFLASH) += tegra20_sflash.o
obj-$(CONFIG_TEGRA20_SLINK) += tegra20_slink.o
diff --git a/drivers/spi/sun6i_spi.c b/drivers/spi/sun6i_spi.c
new file mode 100644
index 0000000000..236ed86a25
--- /dev/null
+++ b/drivers/spi/sun6i_spi.c
@@ -0,0 +1,475 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 Amarula Solutions.
+ * Author: Jagan Teki <jagan at amarulasolutions.com>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <spi.h>
+#include <errno.h>
+#include <fdt_support.h>
+#include <reset.h>
+#include <wait_bit.h>
+
+#include <asm/bitops.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define SUN6I_FIFO_DEPTH 128
+#define SUN8I_FIFO_DEPTH 64
+
+#define SUN6I_GBL_CTL_BUS_ENABLE BIT(0)
+#define SUN6I_GBL_CTL_MASTER BIT(1)
+#define SUN6I_GBL_CTL_TP BIT(7)
+#define SUN6I_GBL_CTL_RST BIT(31)
+
+#define SUN6I_TFR_CTL_CPHA BIT(0)
+#define SUN6I_TFR_CTL_CPOL BIT(1)
+#define SUN6I_TFR_CTL_SPOL BIT(2)
+#define SUN6I_TFR_CTL_CS_MASK 0x30
+#define SUN6I_TFR_CTL_CS(cs) (((cs) << 4) & SUN6I_TFR_CTL_CS_MASK)
+#define SUN6I_TFR_CTL_CS_MANUAL BIT(6)
+#define SUN6I_TFR_CTL_CS_LEVEL BIT(7)
+#define SUN6I_TFR_CTL_DHB BIT(8)
+#define SUN6I_TFR_CTL_FBS BIT(12)
+#define SUN6I_TFR_CTL_XCH_MASK 0x80000000
+#define SUN6I_TFR_CTL_XCH BIT(31)
+
+#define SUN6I_FIFO_CTL_RF_RDY_TRIG_LEVEL_MASK 0xff
+#define SUN6I_FIFO_CTL_RF_RDY_TRIG_LEVEL_BITS 0
+#define SUN6I_FIFO_CTL_RF_RST BIT(15)
+#define SUN6I_FIFO_CTL_TF_ERQ_TRIG_LEVEL_MASK 0xff
+#define SUN6I_FIFO_CTL_TF_ERQ_TRIG_LEVEL_BITS 16
+#define SUN6I_FIFO_CTL_TF_RST BIT(31)
+
+#define SUN6I_CLK_CTL_CDR2_MASK 0xff
+#define SUN6I_CLK_CTL_CDR2(div) (((div) & SUN6I_CLK_CTL_CDR2_MASK) << 0)
+#define SUN6I_CLK_CTL_CDR1_MASK 0xf
+#define SUN6I_CLK_CTL_CDR1(div) (((div) & SUN6I_CLK_CTL_CDR1_MASK) << 8)
+#define SUN6I_CLK_CTL_DRS BIT(12)
+
+#define SUN6I_MAX_XFER_SIZE 0xffffff
+#define SUN6I_BURST_CNT(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE)
+#define SUN6I_XMIT_CNT(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE)
+#define SUN6I_BURST_CTL_CNT_STC(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE)
+
+#define SUN6I_SPI_MAX_RATE 24000000
+#define SUN6I_SPI_MIN_RATE 3000
+#define SUN6I_SPI_DEFAULT_RATE 1000000
+#define SUN6I_SPI_TIMEOUT_US 1000000
+
+/* sun6i spi register set */
+struct sun6i_spi_regs {
+ u32 res1; /* 0x00 */
+ u32 gblctl; /* 0x04 */
+ u32 tfrctl; /* 0x08 */
+ u32 res2; /* 0x0c */
+ u32 intctl; /* 0x10 */
+ u32 intsta; /* 0x14 */
+ u32 fifoctl; /* 0x18 */
+ u32 fifosta; /* 0x1c */
+ u32 res3; /* 0x20 */
+ u32 clkctl; /* 0x24 */
+ u32 res4[2]; /* 0x28 */
+ u32 bc; /* 0x30 */
+ u32 tc; /* 0x34 */
+ u32 bctlc; /* 0x38 */
+ u32 res5[113]; /* 0x3c */
+ u32 txdata; /* 0x200 */
+ u32 res6[63]; /* 0x204 */
+ u32 rxdata; /* 0x300 */
+};
+
+struct sun6i_spi_platdata {
+ u32 base_addr;
+ u32 max_hz;
+};
+
+struct sun6i_spi_priv {
+ struct sun6i_spi_regs *regs;
+ u32 freq;
+ u32 mode;
+ u32 fifo_depth;
+
+ const u8 *tx_buf;
+ u8 *rx_buf;
+};
+
+static inline void sun6i_spi_drain_fifo(struct sun6i_spi_priv *priv, int len)
+{
+ u8 byte;
+
+ while (len--) {
+ byte = readb(&priv->regs->rxdata);
+ *priv->rx_buf++ = byte;
+ }
+}
+
+static inline void sun6i_spi_fill_fifo(struct sun6i_spi_priv *priv, int len)
+{
+ u8 byte;
+
+ while (len--) {
+ byte = priv->tx_buf ? *priv->tx_buf++ : 0;
+ writeb(byte, &priv->regs->txdata);
+ }
+}
+
+static void sun6i_spi_set_cs(struct udevice *bus, u8 cs, bool enable)
+{
+ struct sun6i_spi_priv *priv = dev_get_priv(bus);
+ u32 reg;
+
+ reg = readl(&priv->regs->tfrctl);
+ reg &= ~SUN6I_TFR_CTL_CS_MASK;
+ reg |= SUN6I_TFR_CTL_CS(cs);
+
+ if (enable)
+ reg &= ~SUN6I_TFR_CTL_CS_LEVEL;
+ else
+ reg |= SUN6I_TFR_CTL_CS_LEVEL;
+
+ writel(reg, &priv->regs->tfrctl);
+}
+
+static int sun6i_spi_parse_pins(struct udevice *dev)
+{
+ const void *fdt = gd->fdt_blob;
+ const char *pin_name;
+ const fdt32_t *list;
+ u32 phandle;
+ int drive, pull = 0, pin, i;
+ int offset;
+ int size;
+
+ list = fdt_getprop(fdt, dev_of_offset(dev), "pinctrl-0", &size);
+ if (!list) {
+ printf("WARNING: sun6i_spi: cannot find pinctrl-0 node\n");
+ return -EINVAL;
+ }
+
+ while (size) {
+ phandle = fdt32_to_cpu(*list++);
+ size -= sizeof(*list);
+
+ offset = fdt_node_offset_by_phandle(fdt, phandle);
+ if (offset < 0)
+ return offset;
+
+ drive = fdt_getprop_u32_default_node(fdt, offset, 0,
+ "drive-strength", 0);
+ if (drive) {
+ if (drive <= 10)
+ drive = 0;
+ else if (drive <= 20)
+ drive = 1;
+ else if (drive <= 30)
+ drive = 2;
+ else
+ drive = 3;
+ } else {
+ drive = fdt_getprop_u32_default_node(fdt, offset, 0,
+ "allwinner,drive",
+ 0);
+ drive = min(drive, 3);
+ }
+
+ if (fdt_get_property(fdt, offset, "bias-disable", NULL))
+ pull = 0;
+ else if (fdt_get_property(fdt, offset, "bias-pull-up", NULL))
+ pull = 1;
+ else if (fdt_get_property(fdt, offset, "bias-pull-down", NULL))
+ pull = 2;
+ else
+ pull = fdt_getprop_u32_default_node(fdt, offset, 0,
+ "allwinner,pull",
+ 0);
+ pull = min(pull, 2);
+
+ for (i = 0; ; i++) {
+ pin_name = fdt_stringlist_get(fdt, offset,
+ "pins", i, NULL);
+ if (!pin_name) {
+ pin_name = fdt_stringlist_get(fdt, offset,
+ "allwinner,pins",
+ i, NULL);
+ if (!pin_name)
+ break;
+ }
+
+ pin = name_to_gpio(pin_name);
+ if (pin < 0)
+ break;
+
+ sunxi_gpio_set_cfgpin(pin, SUNXI_GPC_SPI0);
+ sunxi_gpio_set_drv(pin, drive);
+ sunxi_gpio_set_pull(pin, pull);
+ }
+ }
+ return 0;
+}
+
+static inline int sun6i_spi_enable_ccu(struct udevice *dev)
+{
+ struct clk ahb_clk, mod_clk;
+ struct reset_ctl reset;
+ int ret;
+
+ ret = clk_get_by_name(dev, "ahb", &ahb_clk);
+ if (ret) {
+ dev_err(dev, "failed to get ahb clock\n");
+ return ret;
+ }
+
+ ret = clk_get_by_name(dev, "mod", &mod_clk);
+ if (ret) {
+ dev_err(dev, "failed to get mod clock\n");
+ return ret;
+ }
+
+ ret = reset_get_by_index(dev, 0, &reset);
+ if (ret) {
+ dev_err(dev, "failed to get reset\n");
+ return ret;
+ }
+
+ ret = clk_enable(&ahb_clk);
+ if (ret) {
+ dev_err(dev, "failed to enable ahb clock\n");
+ return ret;
+ }
+
+ ret = clk_enable(&mod_clk);
+ if (ret) {
+ dev_err(dev, "failed to enable mod clock\n");
+ return ret;
+ }
+
+ ret = reset_deassert(&reset);
+ if (ret) {
+ dev_err(dev, "failed to deassert reset\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sun6i_spi_ofdata_to_platdata(struct udevice *bus)
+{
+ struct sun6i_spi_platdata *plat = dev_get_platdata(bus);
+ int node = dev_of_offset(bus);
+
+ plat->base_addr = devfdt_get_addr(bus);
+ plat->max_hz = fdtdec_get_int(gd->fdt_blob, node,
+ "spi-max-frequency",
+ SUN6I_SPI_DEFAULT_RATE);
+
+ if (plat->max_hz > SUN6I_SPI_MAX_RATE)
+ plat->max_hz = SUN6I_SPI_MAX_RATE;
+
+ return 0;
+}
+
+static int sun6i_spi_probe(struct udevice *bus)
+{
+ struct sun6i_spi_platdata *plat = dev_get_platdata(bus);
+ struct sun6i_spi_priv *priv = dev_get_priv(bus);
+ int ret;
+
+ ret = sun6i_spi_enable_ccu(bus);
+ if (ret)
+ return ret;
+
+ sun6i_spi_parse_pins(bus);
+
+ priv->regs = (struct sun6i_spi_regs *)(uintptr_t)plat->base_addr;
+ priv->freq = plat->max_hz;
+ priv->fifo_depth = dev_get_driver_data(bus);
+
+ return 0;
+}
+
+static int sun6i_spi_claim_bus(struct udevice *dev)
+{
+ struct sun6i_spi_priv *priv = dev_get_priv(dev->parent);
+
+ writel(SUN6I_GBL_CTL_BUS_ENABLE | SUN6I_GBL_CTL_MASTER |
+ SUN6I_GBL_CTL_TP, &priv->regs->gblctl);
+ writel(SUN6I_TFR_CTL_CS_MANUAL, &priv->regs->tfrctl);
+
+ return 0;
+}
+
+static int sun6i_spi_release_bus(struct udevice *dev)
+{
+ struct sun6i_spi_priv *priv = dev_get_priv(dev->parent);
+ u32 reg;
+
+ reg = readl(&priv->regs->gblctl);
+ reg &= ~SUN6I_GBL_CTL_BUS_ENABLE;
+ writel(reg, &priv->regs->gblctl);
+
+ return 0;
+}
+
+static int sun6i_spi_xfer(struct udevice *dev, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct udevice *bus = dev->parent;
+ struct sun6i_spi_priv *priv = dev_get_priv(bus);
+ struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
+
+ u32 len = bitlen / 8;
+ u32 reg;
+ u8 nbytes;
+ int ret;
+
+ priv->tx_buf = dout;
+ priv->rx_buf = din;
+
+ if (bitlen % 8) {
+ debug("%s: non byte-aligned SPI transfer.\n", __func__);
+ return -ENAVAIL;
+ }
+
+ if (flags & SPI_XFER_BEGIN)
+ sun6i_spi_set_cs(bus, slave_plat->cs, true);
+
+ /* Reset FIFOs */
+ writel(SUN6I_FIFO_CTL_RF_RST | SUN6I_FIFO_CTL_TF_RST,
+ &priv->regs->fifoctl);
+
+ while (len) {
+ /* Setup the transfer now... */
+ nbytes = min(len, priv->fifo_depth);
+
+ /* Setup the counters */
+ writel(SUN6I_BURST_CNT(nbytes), &priv->regs->bc);
+ writel(SUN6I_XMIT_CNT(nbytes), &priv->regs->tc);
+ writel(SUN6I_BURST_CTL_CNT_STC(nbytes), &priv->regs->bctlc);
+
+ /* Fill the TX FIFO */
+ sun6i_spi_fill_fifo(priv, nbytes);
+
+ /* Start the transfer */
+ reg = readl(&priv->regs->tfrctl);
+ writel(reg | SUN6I_TFR_CTL_XCH, &priv->regs->tfrctl);
+
+ /* Wait transfer to complete */
+ ret = wait_for_bit_le32(&priv->regs->tfrctl,
+ SUN6I_TFR_CTL_XCH_MASK, false,
+ SUN6I_SPI_TIMEOUT_US, false);
+ if (ret) {
+ printf("ERROR: sun6i_spi: Timeout transferring data\n");
+ sun6i_spi_set_cs(bus, slave_plat->cs, false);
+ return ret;
+ }
+
+ /* Drain the RX FIFO */
+ sun6i_spi_drain_fifo(priv, nbytes);
+
+ len -= nbytes;
+ }
+
+ if (flags & SPI_XFER_END)
+ sun6i_spi_set_cs(bus, slave_plat->cs, false);
+
+ return 0;
+}
+
+static int sun6i_spi_set_speed(struct udevice *dev, uint speed)
+{
+ struct sun6i_spi_platdata *plat = dev_get_platdata(dev);
+ struct sun6i_spi_priv *priv = dev_get_priv(dev);
+ unsigned int div;
+ u32 reg;
+
+ if (speed > plat->max_hz)
+ speed = plat->max_hz;
+
+ if (speed < SUN6I_SPI_MIN_RATE)
+ speed = SUN6I_SPI_MIN_RATE;
+
+ /*
+ * Setup clock divider.
+ *
+ * We have two choices there. Either we can use the clock
+ * divide rate 1, which is calculated thanks to this formula:
+ * SPI_CLK = MOD_CLK / (2 ^ cdr)
+ * Or we can use CDR2, which is calculated with the formula:
+ * SPI_CLK = MOD_CLK / (2 * (cdr + 1))
+ * Whether we use the former or the latter is set through the
+ * DRS bit.
+ *
+ * First try CDR2, and if we can't reach the expected
+ * frequency, fall back to CDR1.
+ */
+ reg = readl(&priv->regs->clkctl);
+ div = SUN6I_SPI_MAX_RATE / (2 * speed);
+ if (div <= (SUN6I_CLK_CTL_CDR2_MASK + 1)) {
+ if (div > 0)
+ div--;
+
+ reg |= SUN6I_CLK_CTL_CDR2(div) | SUN6I_CLK_CTL_DRS;
+ } else {
+ div = __ilog2(SUN6I_SPI_MAX_RATE) - __ilog2(speed);
+ reg |= SUN6I_CLK_CTL_CDR1(div);
+ }
+
+ writel(reg, &priv->regs->clkctl);
+ priv->freq = speed;
+
+ return 0;
+}
+
+static int sun6i_spi_set_mode(struct udevice *dev, uint mode)
+{
+ struct sun6i_spi_priv *priv = dev_get_priv(dev);
+ u32 reg;
+
+ reg = readl(&priv->regs->tfrctl);
+ reg &= ~(SUN6I_TFR_CTL_CPOL | SUN6I_TFR_CTL_CPHA);
+
+ if (mode & SPI_CPOL)
+ reg |= SUN6I_TFR_CTL_CPOL;
+
+ if (mode & SPI_CPHA)
+ reg |= SUN6I_TFR_CTL_CPHA;
+
+ priv->mode = mode;
+ writel(reg, &priv->regs->tfrctl);
+
+ return 0;
+}
+
+static const struct dm_spi_ops sun6i_spi_ops = {
+ .claim_bus = sun6i_spi_claim_bus,
+ .release_bus = sun6i_spi_release_bus,
+ .xfer = sun6i_spi_xfer,
+ .set_speed = sun6i_spi_set_speed,
+ .set_mode = sun6i_spi_set_mode,
+};
+
+static const struct udevice_id sun6i_spi_ids[] = {
+ { .compatible = "allwinner,sun6i-a31-spi",
+ .data = SUN6I_FIFO_DEPTH },
+ { .compatible = "allwinner,sun8i-h3-spi",
+ .data = SUN8I_FIFO_DEPTH },
+ { }
+};
+
+U_BOOT_DRIVER(sun6i_spi) = {
+ .name = "sun6i_spi",
+ .id = UCLASS_SPI,
+ .of_match = sun6i_spi_ids,
+ .ops = &sun6i_spi_ops,
+ .ofdata_to_platdata = sun6i_spi_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct sun6i_spi_platdata),
+ .priv_auto_alloc_size = sizeof(struct sun6i_spi_priv),
+ .probe = sun6i_spi_probe,
+};
--
2.18.0.321.gffc6fa0e3
More information about the U-Boot
mailing list