[U-Boot] [PATCH v2] usb: ehci-generic: Add vbus-supply regulator support

[Marek Vasut]

On 08/09/2018 09:14 AM, Patrice Chotard wrote:
> Add vbus-supply regulator support.
> On some board vbus is not controlled by the phy but by
> an external regulator.
> 
> Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
> ---
> 
> Changes in v2:
>       - Add test on device_get_supply_regulator() call
> 
>  drivers/usb/host/ehci-generic.c | 39 ++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 38 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/usb/host/ehci-generic.c b/drivers/usb/host/ehci-generic.c
> index 5a56f66cfaa6..ad926d05ac3e 100644
> --- a/drivers/usb/host/ehci-generic.c
> +++ b/drivers/usb/host/ehci-generic.c
> @@ -11,6 +11,7 @@
>  #include <asm/io.h>
>  #include <dm.h>
>  #include "ehci.h"
> +#include <power/regulator.h>
>  
>  /*
>   * Even though here we don't explicitly use "struct ehci_ctrl"
> @@ -22,6 +23,9 @@ struct generic_ehci {
>  	struct clk *clocks;
>  	struct reset_ctl *resets;
>  	struct phy phy;
> +#ifdef CONFIG_DM_REGULATOR
> +	struct udevice *vbus_supply;
> +#endif
>  	int clock_count;
>  	int reset_count;
>  };
> @@ -145,10 +149,27 @@ static int ehci_usb_probe(struct udevice *dev)
>  		}
>  	}
>  
> -	err = ehci_setup_phy(dev, 0);
> +#ifdef CONFIG_DM_REGULATOR
> +	err = device_get_supply_regulator(dev, "vbus-supply",
> +					  &priv->vbus_supply);
>  	if (err)
>  		goto reset_err;
What if there is no regulator, what does this return , probably a
negative return value ?

> +	if (priv->vbus_supply) {
> +		err = regulator_set_enable(priv->vbus_supply, true);
> +		if (err) {
> +			pr_err("Error enabling VBUS supply\n");
> +			goto reset_err;
> +		}
> +	} else {
> +		debug("%s: No vbus supply\n", dev->name);
> +	}
> +#endif
> +
> +	err = ehci_setup_phy(dev, 0);> +	if (err)
> +		goto regulator_err;
> +
>  	hccr = map_physmem(dev_read_addr(dev), 0x100, MAP_NOCACHE);
>  	hcor = (struct ehci_hcor *)((uintptr_t)hccr +
>  				    HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
> @@ -164,6 +185,15 @@ phy_err:
>  	if (ret)
>  		dev_err(dev, "failed to shutdown usb phy\n");
>  
> +regulator_err:
> +#ifdef CONFIG_DM_REGULATOR
> +	if (priv->vbus_supply) {
> +		ret = regulator_set_enable(priv->vbus_supply, false);
> +		if (ret)
> +			pr_err("Error disabling VBUS supply\n");

Can you use dev_err() ? Fix globally .

> +	}
> +#endif
> +
>  reset_err:
>  	ret = reset_release_all(priv->resets, priv->reset_count);
>  	if (ret)
> @@ -189,6 +219,13 @@ static int ehci_usb_remove(struct udevice *dev)
>  	if (ret)
>  		return ret;
>  
> +#ifdef CONFIG_DM_REGULATOR
> +	if (priv->vbus_supply) {
> +		ret = regulator_set_enable(priv->vbus_supply, false);
> +		if (ret)
> +			return ret;
> +	}
> +#endif
>  	ret =  reset_release_all(priv->resets, priv->reset_count);
>  	if (ret)
>  		return ret;
> 


-- 
Best regards,
Marek Vasut