[U-Boot] [PATCH 04/13] pico-imx6ul: Add bmode support

[Otavio Salvador]

From: Fabio Estevam <festevam at gmail.com>

The 'bmode' command is helpful for switching the boot media.

In the case of pico-imx6ul there are two possible boot media:
eMMC or USB.

To boot from eMMC:

=> bmode emmc

To boot from USB (via Serial Download Protocol):

=> bmode usb

Signed-off-by: Fabio Estevam <festevam at gmail.com>
Signed-off-by: Fabio Berton <fabio.berton at ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio at ossystems.com.br>
---

 configs/pico-imx6ul_defconfig | 1 -
 1 file changed, 1 deletion(-)

diff --git a/configs/pico-imx6ul_defconfig b/configs/pico-imx6ul_defconfig
index cae7ded1fa..daa898fb22 100644
--- a/configs/pico-imx6ul_defconfig
+++ b/configs/pico-imx6ul_defconfig
@@ -9,7 +9,6 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
-# CONFIG_CMD_BMODE is not set
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
-- 
2.18.0