[U-Boot] [PATCH v3] serial: omap: Introduce DM specific omap serial
Lokesh Vutla
lokeshvutla at ti.com
Mon Aug 27 10:25:24 UTC 2018
Add driver model support for OMAP_SERIAL while reusing
the functions in ns16550.c
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
Based on the conclusion on the thread[1], added a separate driver for
omap uart.
[1] https://patchwork.ozlabs.org/patch/944756/
Changes since v2:
- Dropped enabling OMAP_SERIAL by default for SOC_DA8XX.
drivers/serial/Kconfig | 9 +++
drivers/serial/Makefile | 1 +
drivers/serial/ns16550.c | 47 +------------
drivers/serial/serial_omap.c | 126 +++++++++++++++++++++++++++++++++++
4 files changed, 139 insertions(+), 44 deletions(-)
create mode 100644 drivers/serial/serial_omap.c
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 766e5ced03..41f43af01f 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -625,6 +625,15 @@ config MSM_SERIAL
for example APQ8016 and MSM8916.
Single baudrate is supported in current implementation (115200).
+config OMAP_SERIAL
+ bool "Support for OMAP specific UART"
+ depends on DM_SERIAL
+ default y if ARCH_OMAP2PLUS
+ select SYS_NS16550
+ help
+ If you have an TI based SoC and want to use the on-chip serial
+ port, say Y to this option. If unsure say N.
+
config OWL_SERIAL
bool "Actions Semi OWL UART"
depends on DM_SERIAL && ARCH_OWL
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 9fa81d855d..03dc29ee2e 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_MVEBU_A3700_UART) += serial_mvebu_a3700.o
obj-$(CONFIG_MPC8XX_CONS) += serial_mpc8xx.o
obj-$(CONFIG_NULLDEV_SERIAL) += serial_nulldev.o
obj-$(CONFIG_OWL_SERIAL) += serial_owl.o
+obj-$(CONFIG_OMAP_SERIAL) += serial_omap.o
ifndef CONFIG_SPL_BUILD
obj-$(CONFIG_USB_TTY) += usbtty.o
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 9c80090aa7..f9041aa626 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -175,7 +175,7 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
;
serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
-#if defined(CONFIG_ARCH_OMAP2PLUS)
+#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_OMAP_SERIAL)
serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/
#endif
@@ -183,7 +183,8 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
serial_out(ns16550_getfcr(com_port), &com_port->fcr);
if (baud_divisor != -1)
NS16550_setbrg(com_port, baud_divisor);
-#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX)
+#if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX) || \
+ defined(CONFIG_OMAP_SERIAL)
/* /16 is proper to hit 115200 with 48MHz */
serial_out(0, &com_port->mdr1);
#endif
@@ -279,42 +280,6 @@ DEBUG_UART_FUNCS
#endif
-#ifdef CONFIG_DEBUG_UART_OMAP
-
-#include <debug_uart.h>
-
-static inline void _debug_uart_init(void)
-{
- struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
- int baud_divisor;
-
- baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK,
- CONFIG_BAUDRATE);
- serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER);
- serial_dout(&com_port->mdr1, 0x7);
- serial_dout(&com_port->mcr, UART_MCRVAL);
- serial_dout(&com_port->fcr, UART_FCR_DEFVAL);
-
- serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL);
- serial_dout(&com_port->dll, baud_divisor & 0xff);
- serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff);
- serial_dout(&com_port->lcr, UART_LCRVAL);
- serial_dout(&com_port->mdr1, 0x0);
-}
-
-static inline void _debug_uart_putc(int ch)
-{
- struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
-
- while (!(serial_din(&com_port->lsr) & UART_LSR_THRE))
- ;
- serial_dout(&com_port->thr, ch);
-}
-
-DEBUG_UART_FUNCS
-
-#endif
-
#ifdef CONFIG_DM_SERIAL
static int ns16550_serial_putc(struct udevice *dev, const char ch)
{
@@ -489,12 +454,6 @@ static const struct udevice_id ns16550_serial_ids[] = {
{ .compatible = "ingenic,jz4780-uart", .data = PORT_JZ4780 },
{ .compatible = "nvidia,tegra20-uart", .data = PORT_NS16550 },
{ .compatible = "snps,dw-apb-uart", .data = PORT_NS16550 },
- { .compatible = "ti,omap2-uart", .data = PORT_NS16550 },
- { .compatible = "ti,omap3-uart", .data = PORT_NS16550 },
- { .compatible = "ti,omap4-uart", .data = PORT_NS16550 },
- { .compatible = "ti,am3352-uart", .data = PORT_NS16550 },
- { .compatible = "ti,am4372-uart", .data = PORT_NS16550 },
- { .compatible = "ti,dra742-uart", .data = PORT_NS16550 },
{}
};
#endif /* OF_CONTROL && !OF_PLATDATA */
diff --git a/drivers/serial/serial_omap.c b/drivers/serial/serial_omap.c
new file mode 100644
index 0000000000..d8a047bb71
--- /dev/null
+++ b/drivers/serial/serial_omap.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Texas Instruments' OMAP serial driver
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ * Lokesh Vutla <lokeshvutla at ti.com>
+ */
+
+#include <common.h>
+#include <debug_uart.h>
+#include <dm.h>
+#include <dt-structs.h>
+#include <ns16550.h>
+#include <serial.h>
+#include <clk.h>
+
+#ifndef CONFIG_SYS_NS16550_CLK
+#define CONFIG_SYS_NS16550_CLK 0
+#endif
+
+#ifdef CONFIG_DEBUG_UART_OMAP
+
+#include <debug_uart.h>
+
+static inline void _debug_uart_init(void)
+{
+ struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
+ int baud_divisor;
+
+ baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK,
+ CONFIG_BAUDRATE);
+ serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER);
+ serial_dout(&com_port->mdr1, 0x7);
+ serial_dout(&com_port->mcr, UART_MCRVAL);
+ serial_dout(&com_port->fcr, UART_FCR_DEFVAL);
+
+ serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL);
+ serial_dout(&com_port->dll, baud_divisor & 0xff);
+ serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff);
+ serial_dout(&com_port->lcr, UART_LCRVAL);
+ serial_dout(&com_port->mdr1, 0x0);
+}
+
+static inline void _debug_uart_putc(int ch)
+{
+ struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
+
+ while (!(serial_din(&com_port->lsr) & UART_LSR_THRE))
+ ;
+ serial_dout(&com_port->thr, ch);
+}
+
+DEBUG_UART_FUNCS
+
+#endif
+
+#if CONFIG_IS_ENABLED(DM_SERIAL)
+
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
+static int omap_serial_ofdata_to_platdata(struct udevice *dev)
+{
+ struct ns16550_platdata *plat = dev->platdata;
+ fdt_addr_t addr;
+ struct clk clk;
+ int err;
+
+ /* try Processor Local Bus device first */
+ addr = dev_read_addr(dev);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE);
+
+ plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0);
+ plat->reg_shift = 2;
+
+ err = clk_get_by_index(dev, 0, &clk);
+ if (!err) {
+ err = clk_get_rate(&clk);
+ if (!IS_ERR_VALUE(err))
+ plat->clock = err;
+ } else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
+ debug("omap serial failed to get clock\n");
+ return err;
+ }
+
+ if (!plat->clock)
+ plat->clock = dev_read_u32_default(dev, "clock-frequency",
+ CONFIG_SYS_NS16550_CLK);
+ if (!plat->clock) {
+ debug("omap serial clock not defined\n");
+ return -EINVAL;
+ }
+
+ plat->fcr = UART_FCR_DEFVAL;
+
+ return 0;
+}
+
+static const struct udevice_id omap_serial_ids[] = {
+ { .compatible = "ti,omap2-uart", },
+ { .compatible = "ti,omap3-uart", },
+ { .compatible = "ti,omap4-uart", },
+ { .compatible = "ti,am3352-uart", },
+ { .compatible = "ti,am4372-uart", },
+ { .compatible = "ti,dra742-uart", },
+ {}
+};
+#endif /* OF_CONTROL && !OF_PLATDATA */
+
+#if CONFIG_IS_ENABLED(SERIAL_PRESENT)
+U_BOOT_DRIVER(omap_serial) = {
+ .name = "omap_serial",
+ .id = UCLASS_SERIAL,
+#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
+ .of_match = omap_serial_ids,
+ .ofdata_to_platdata = omap_serial_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
+#endif
+ .priv_auto_alloc_size = sizeof(struct NS16550),
+ .probe = ns16550_serial_probe,
+ .ops = &ns16550_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
+#endif
+#endif /* DM_SERIAL */
--
2.18.0
More information about the U-Boot
mailing list