[U-Boot] [PATCH v2 15/53] musb-new: sunxi: Use CLK and RESET support
Jagan Teki
jagan at amarulasolutions.com
Fri Aug 10 06:06:33 UTC 2018
Now clock and reset drivers are available for respective
SoC's so use clk and reset ops on musb driver.
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
drivers/usb/musb-new/sunxi.c | 82 +++++++++++++++++++++++-------------
1 file changed, 53 insertions(+), 29 deletions(-)
diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index 9f71b84fd1..440be83f4e 100644
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -16,9 +16,11 @@
* This file is part of the Inventra Controller Driver for Linux.
*/
#include <common.h>
+#include <clk.h>
#include <dm.h>
#include <generic-phy.h>
#include <phy-sun4i-usb.h>
+#include <reset.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
@@ -78,16 +80,15 @@
struct sunxi_musb_config {
struct musb_hdrc_config *config;
- u8 rst_bit;
- u8 clkgate_bit;
};
struct sunxi_glue {
struct musb_host_data mdata;
- struct sunxi_ccm_reg *ccm;
struct sunxi_musb_config *cfg;
struct device dev;
struct phy phy;
+ struct clk clocks;
+ struct reset_ctl resets;
};
#define to_sunxi_glue(d) container_of(d, struct sunxi_glue, dev)
@@ -291,6 +292,18 @@ static int sunxi_musb_init(struct musb *musb)
pr_debug("%s():\n", __func__);
+ ret = clk_enable(&glue->clocks);
+ if (ret) {
+ dev_err(dev, "failed to enable clock\n");
+ return ret;
+ }
+
+ ret = reset_deassert(&glue->resets);
+ if (ret) {
+ dev_err(dev, "failed to deassert reset\n");
+ return ret;
+ }
+
ret = generic_phy_init(&glue->phy);
if (ret) {
pr_err("failed to init USB PHY\n");
@@ -299,17 +312,6 @@ static int sunxi_musb_init(struct musb *musb)
musb->isr = sunxi_musb_interrupt;
- setbits_le32(&glue->ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_USB0));
- if (glue->cfg->clkgate_bit)
- setbits_le32(&glue->ccm->ahb_gate0,
- BIT(glue->cfg->clkgate_bit));
-#ifdef CONFIG_SUNXI_GEN_SUN6I
- setbits_le32(&glue->ccm->ahb_reset0_cfg, BIT(AHB_GATE_OFFSET_USB0));
- if (glue->cfg->rst_bit)
- setbits_le32(&glue->ccm->ahb_reset0_cfg,
- BIT(glue->cfg->rst_bit));
-#endif
-
USBC_ConfigFIFO_Base();
USBC_EnableDpDmPullUp(musb->mregs);
USBC_EnableIdPullUp(musb->mregs);
@@ -339,16 +341,17 @@ static int sunxi_musb_exit(struct musb *musb)
}
}
-#ifdef CONFIG_SUNXI_GEN_SUN6I
- clrbits_le32(&glue->ccm->ahb_reset0_cfg, BIT(AHB_GATE_OFFSET_USB0));
- if (glue->cfg->rst_bit)
- clrbits_le32(&glue->ccm->ahb_reset0_cfg,
- BIT(glue->cfg->rst_bit));
-#endif
- clrbits_le32(&glue->ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_USB0));
- if (glue->cfg->clkgate_bit)
- clrbits_le32(&glue->ccm->ahb_gate0,
- BIT(glue->cfg->clkgate_bit));
+ ret = reset_assert(&glue->resets);
+ if (ret) {
+ dev_err(dev, "failed to deassert reset\n");
+ return ret;
+ }
+
+ ret = clk_disable(&glue->clocks);
+ if (ret) {
+ dev_err(dev, "failed to enable clock\n");
+ return ret;
+ }
return 0;
}
@@ -433,6 +436,7 @@ static int musb_usb_probe(struct udevice *dev)
struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
struct musb_hdrc_platform_data pdata;
void *base = dev_read_addr_ptr(dev);
+ int clock_nb, reset_nb;
int ret;
if (!base)
@@ -442,9 +446,31 @@ static int musb_usb_probe(struct udevice *dev)
if (!glue->cfg)
return -EINVAL;
- glue->ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- if (IS_ERR(glue->ccm))
- return PTR_ERR(glue->ccm);
+ clock_nb = ofnode_count_phandle_with_args(dev_ofnode(dev), "clocks",
+ "#clock-cells");
+ if (clock_nb < 0) {
+ dev_err(dev, "failed to get clock phandle(%d)\n", clock_nb);
+ return clock_nb;
+ }
+
+ ret = clk_get_by_index(dev, 0, &glue->clocks);
+ if (ret) {
+ dev_err(dev, "failed to get clock 0\n");
+ clk_free(&glue->clocks);
+ }
+
+ reset_nb = ofnode_count_phandle_with_args(dev_ofnode(dev), "resets",
+ "#reset-cells");
+ if (reset_nb < 0) {
+ dev_err(dev, "failed to get reset phandle(%d)\n", clock_nb);
+ return reset_nb;
+ }
+
+ ret = reset_get_by_index(dev, 0, &glue->resets);
+ if (ret) {
+ dev_err(dev, "failed to get reset 0\n");
+ reset_free(&glue->resets);
+ }
ret = generic_phy_get_by_name(dev, "usb", &glue->phy);
if (ret) {
@@ -499,8 +525,6 @@ static const struct sunxi_musb_config sun4i_a10_cfg = {
static const struct sunxi_musb_config sun8i_h3_cfg = {
.config = &musb_config_h3,
- .rst_bit = 23,
- .clkgate_bit = 23,
};
static const struct udevice_id sunxi_musb_ids[] = {
--
2.18.0.321.gffc6fa0e3
More information about the U-Boot
mailing list