[U-Boot] [PATCH v1 08/11] configs: stm32h743-evaluation: Add DISTRO_DEFAULT support

[Patrice Chotard]

Add DISTRO_DEFAULT support to be able to boot on mmc
by default on boot.

Signed-off-by: Patrice Chotard <patrice.chotard at st.com>
---

 configs/stm32h743-eval_defconfig | 12 +++---------
 include/configs/stm32h743-eval.h | 16 ++++++++++++++--
 2 files changed, 17 insertions(+), 11 deletions(-)

diff --git a/configs/stm32h743-eval_defconfig b/configs/stm32h743-eval_defconfig
index 1122202c543b..84d0ca7a8474 100644
--- a/configs/stm32h743-eval_defconfig
+++ b/configs/stm32h743-eval_defconfig
@@ -5,34 +5,28 @@ CONFIG_SYS_MALLOC_F_LEN=0xF00
 CONFIG_STM32H7=y
 CONFIG_TARGET_STM32H743_EVAL=y
 CONFIG_DEFAULT_DEVICE_TREE="stm32h743i-eval"
-CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
+# CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_DEFAULT_FDT_FILE="stm32h743i-eval"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot > "
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
 CONFIG_AUTOBOOT_STOP_STR=" "
-CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIMER=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
+# CONFIG_ISO_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_OF_EMBED=y
-# CONFIG_NET is not set
 CONFIG_DM_MMC=y
 CONFIG_STM32_SDMMC2=y
 # CONFIG_PINCTRL_FULL is not set
 # CONFIG_SPL_SERIAL_PRESENT is not set
-CONFIG_REGEX=y
 CONFIG_OF_LIBFDT_OVERLAY=y
 # CONFIG_EFI_LOADER is not set
diff --git a/include/configs/stm32h743-eval.h b/include/configs/stm32h743-eval.h
index 90fc736c3f28..b49dc1a34a8a 100644
--- a/include/configs/stm32h743-eval.h
+++ b/include/configs/stm32h743-eval.h
@@ -31,8 +31,20 @@
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_MALLOC_LEN		(1 * 1024 * 1024)
 
-#define CONFIG_BOOTARGS							\
-	"console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0)
+
+#include <config_distro_bootcmd.h>
+#define CONFIG_EXTRA_ENV_SETTINGS				\
+			"kernel_addr_r=0xD0008000\0"		\
+			"fdtfile=stm32h743i-eval.dtb\0"	\
+			"fdt_addr_r=0xD0700000\0"		\
+			"scriptaddr=0xD0800000\0"		\
+			"pxefile_addr_r=0xD0800000\0" \
+			"fdt_high=0xffffffffffffffff\0"		\
+			"initrd_high=0xffffffffffffffff\0"	\
+			"ramdisk_addr_r=0xD0900000\0"		\
+			BOOTENV
 
 /*
  * Command line configuration.
-- 
1.9.1