[U-Boot] [PATCH] rockchip: rk3288: dts: remove 'vmmc' from emmc node

[Kever Yang]

The U-Boot eMMC does not need to care about the power for Rockchip
SoC, because if the board is using eMMC, the power will default on
(for bootrom), and we do not do power management for it like kernel,
so the 'vmmc', 'vqmmc' is only useful for SD in U-Boot.

Signed-off-by: Kever Yang <kever.yang at rock-chips.com>
---

 arch/arm/dts/rk3288-evb.dtsi      | 2 --
 arch/arm/dts/rk3288-firefly.dtsi  | 2 --
 arch/arm/dts/rk3288-miqi.dtsi     | 2 --
 arch/arm/dts/rk3288-popmetal.dtsi | 2 --
 4 files changed, 8 deletions(-)

diff --git a/arch/arm/dts/rk3288-evb.dtsi b/arch/arm/dts/rk3288-evb.dtsi
index ce75bd5d28..04902c0bd3 100644
--- a/arch/arm/dts/rk3288-evb.dtsi
+++ b/arch/arm/dts/rk3288-evb.dtsi
@@ -150,8 +150,6 @@
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
-	vmmc-supply = <&vcc_io>;
-	vqmmc-supply = <&vcc_flash>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/rk3288-firefly.dtsi b/arch/arm/dts/rk3288-firefly.dtsi
index 2239ab9f59..596b274e81 100644
--- a/arch/arm/dts/rk3288-firefly.dtsi
+++ b/arch/arm/dts/rk3288-firefly.dtsi
@@ -138,8 +138,6 @@
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
-	vmmc-supply = <&vcc_io>;
-	vqmmc-supply = <&vcc_flash>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/rk3288-miqi.dtsi b/arch/arm/dts/rk3288-miqi.dtsi
index 432f744beb..4be2abdd26 100644
--- a/arch/arm/dts/rk3288-miqi.dtsi
+++ b/arch/arm/dts/rk3288-miqi.dtsi
@@ -102,8 +102,6 @@
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
-	vmmc-supply = <&vcc_io>;
-	vqmmc-supply = <&vcc_flash>;
 	status = "okay";
 };
 
diff --git a/arch/arm/dts/rk3288-popmetal.dtsi b/arch/arm/dts/rk3288-popmetal.dtsi
index 63785eb55e..4aab701d5e 100644
--- a/arch/arm/dts/rk3288-popmetal.dtsi
+++ b/arch/arm/dts/rk3288-popmetal.dtsi
@@ -171,8 +171,6 @@
 	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
-	vmmc-supply = <&vcc_io>;
-	vqmmc-supply = <&vcc_flash>;
 	status = "okay";
 };
 
-- 
2.18.0