December 2018 Archives by author
Starting: Sat Dec 1 00:48:18 UTC 2018
Ending: Mon Dec 31 19:31:19 UTC 2018
Messages: 3151
- [U-Boot] network not work with u-boot
cleancode at 163.com
- [U-Boot] network not work with u-boot
cleancode at 163.com
- [U-Boot] [PATCH] power: regulator: Return success on attempt to disable an always-on regulator
Faiz Abbas
- [U-Boot] Is mxsldr and mxsboot supported for imx7 processors
Sonu Abraham
- [U-Boot] [BeagleBone Black] Possible bug in U-Boot efi loader for BeagleBone Black
Dominik Adamski
- [U-Boot] [BeagleBone Black] Possible bug in U-Boot efi loader for BeagleBone Black
Dominik Adamski
- [U-Boot] [BeagleBone Black] Possible bug in U-Boot efi loader for BeagleBone Black
Dominik Adamski
- [U-Boot] [BeagleBone Black] Possible bug in U-Boot efi loader for BeagleBone Black
Dominik Adamski
- [U-Boot] [PATCH v2] armv8:LX2160: Adds distro secure boot support.
Udit Agarwal
- [U-Boot] [PATCH 1/2] Kconfig: Add entry for VF610 NAND NFC device tree aware driver
Stefan Agner
- [U-Boot] [PATCH] usb: composite: Move bitmap related operations to ./include/linux/bitmap.h
Stefan Agner
- [U-Boot] [PATCH v1 1/3] ddr: vybrid: Add DDRMC calibration related registers (DQS to DQ)
Stefan Agner
- [U-Boot] [PATCH] ddrmc: vybrid: We shall perform bitwise AND, not logical one
Stefan Agner
- [U-Boot] [PATCH v1 2/3] ddr: vybrid: Provide code to perform on-boot calibration
Stefan Agner
- [U-Boot] [PATCH v1 3/3] ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code
Stefan Agner
- [U-Boot] [PATCH v1 0/4] ddr: vybrid: various fixes
Stefan Agner
- [U-Boot] [PATCH v1 1/4] toradex: colibri_vf: fix memory initialization
Stefan Agner
- [U-Boot] [PATCH v1 2/4] ARM: vf610: ddrmc: fix CR138 preprocessor define
Stefan Agner
- [U-Boot] [PATCH v1 3/4] ARM: vf610: ddrmc: fix initialization completion detection
Stefan Agner
- [U-Boot] [PATCH v1 4/4] ARM: vf610: ddrmc: do not write CR79 by default
Stefan Agner
- [U-Boot] [PATCH v1 3/4] ARM: vf610: ddrmc: fix initialization completion detection
Stefan Agner
- [U-Boot] [PATCH v1 1/4] toradex: colibri_vf: fix memory initialization
Stefan Agner
- [U-Boot] [PATCH] nand: vybrid: Use calloc() instead of malloc() to allocate struct nfc
Stefan Agner
- [U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly
Stefan Agner
- [U-Boot] [PATCH v1] board: toradex: colibri_vf: unset NFS and LOADS/B
Stefan Agner
- [U-Boot] [PATCH v1] mtd: nand: raw: allow to disable unneeded ECC layouts
Stefan Agner
- [U-Boot] [PATCH v1] fs: fat: dynamically allocate memory for temporary buffer
Stefan Agner
- [U-Boot] [PATCH v1] fs: fat: dynamically allocate memory for temporary buffer
Stefan Agner
- [U-Boot] [PATCH v1] fs: fat: dynamically allocate memory for temporary buffer
Stefan Agner
- [U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly
Stefan Agner
- [U-Boot] [PATCH v1 3/4] ARM: vf610: ddrmc: fix initialization completion detection
Stefan Agner
- [U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly
Stefan Agner
- [U-Boot] [PATCH v1] ARM: vf610: ddrmc: program Dummy DDRBYTE1/2
Stefan Agner
- [U-Boot] [PATCH v2] imx6: apalis: Make the boot process more generic
Stefan Agner
- [U-Boot] [PATCH 0/4] efi_loader: non-volatile variables support
Takahiro Akashi
- [U-Boot] [PATCH] qemu-arm: Add persistent environment support
Takahiro Akashi
- [U-Boot] [PATCH] qemu-arm: Add persistent environment support
Takahiro Akashi
- [U-Boot] [PATCH] qemu-arm: Add persistent environment support
Takahiro Akashi
- [U-Boot] [PATCH] riscv: configs: Rename ax25-ae350 defconfig
Andes
- [U-Boot] [PATCH v2] riscv: configs: Rename ax25-ae350 defconfig
Andes
- [U-Boot] [PATCH v3 0/3] Rename ax25-ae350 defconfig
Andes
- [U-Boot] [PATCH v3 1/3] riscv: configs: Rename ax25-ae350 defconfig
Andes
- [U-Boot] [PATCH v3 2/3] MAINTAINERS: Sync for ax25-ae350 rename
Andes
- [U-Boot] [PATCH v3 3/3] doc: README.ae350: Sync for ax25-ae350 rename
Andes
- [U-Boot] [PATCH v4 0/2] Rename ax25-ae350 defconfig
Andes
- [U-Boot] [PATCH v4 1/2] riscv: configs: Rename ax25-ae350 defconfig
Andes
- [U-Boot] [PATCH v4 2/2] doc: README.ae350: Sync for ax25-ae350 rename
Andes
- [U-Boot] [PATCH v5 0/4] Stratix10 FPGA reconfiguration support
Ang, Chee Hong
- [U-Boot] [PATCH v5 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table
Ang, Chee Hong
- [U-Boot] [PATCH v6 0/4] Stratix10 FPGA reconfiguration support
Ang, Chee Hong
- [U-Boot] [PATCH v6 4/4] arm: socfpga: stratix10: Enable Stratix10 FPGA Reconfiguration
Ang, Chee Hong
- [U-Boot] [PATCH v6 4/4] arm: socfpga: stratix10: Enable Stratix10 FPGA Reconfiguration
Ang, Chee Hong
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20181203
Neil Armstrong
- [U-Boot] [PATCH] pinctrl: meson: Fix GPIO direction registers access
Neil Armstrong
- [U-Boot] [PATCH v2 0/5] spi-flash: switch to "jedec, spi-nor" binding
Neil Armstrong
- [U-Boot] [PATCH v2 1/5] mtd: sf_probe: add jedec, spi-nor compatible
Neil Armstrong
- [U-Boot] [PATCH v2 2/5] dts: switch spi-flash to jedec, spi-nor compatible
Neil Armstrong
- [U-Boot] [PATCH v2 3/5] mtd: sf_probe: remove spi-flash compatible
Neil Armstrong
- [U-Boot] [PATCH v2 4/5] fdtdec: switch GENERIC_SPI_FLASH to jedec, spi-nor
Neil Armstrong
- [U-Boot] [PATCH v2 5/5] doc: device-tree-bindings: switch from spi-flash to jedec, spi-nor
Neil Armstrong
- [U-Boot] [PATCH v2 4/5] fdtdec: switch GENERIC_SPI_FLASH to jedec, spi-nor
Neil Armstrong
- [U-Boot] [PATCH] pinctrl: meson: axg: Fix GPIO pin offsets
Neil Armstrong
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20181207
Neil Armstrong
- [U-Boot] [PATCH] test: dm: regmap: Fix the long test delay
Neil Armstrong
- [U-Boot] policy regarding unused code
Neil Armstrong
- [U-Boot] [PATCH u-boot] arm: dts: s400: Fix status for eMMC and SDIO ports
Neil Armstrong
- [U-Boot] [PATCH u-boot] arm: dts: s400: Fix status for eMMC and SDIO ports
Neil Armstrong
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20181219
Neil Armstrong
- [U-Boot] [PATCH 12/19] riscv: Do some basic architecture level cpu initialization
Auer, Lukas
- [U-Boot] [PATCH 17/19] riscv: Pass correct exception code to _exit_trap()
Auer, Lukas
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Auer, Lukas
- [U-Boot] [PATCH 05/19] riscv: Add a SYSCON driver for Core Local Interruptor
Auer, Lukas
- [U-Boot] [PATCH 05/19] riscv: Add a SYSCON driver for Core Local Interruptor
Auer, Lukas
- [U-Boot] [PATCH v2 04/20] cpu: Add a RISC-V CPU driver
Auer, Lukas
- [U-Boot] [PATCH v2 05/20] timer: Add generic driver for RISC-V privileged architecture defined timer
Auer, Lukas
- [U-Boot] [PATCH v2 06/20] riscv: ax25: Hide the ax25-specific Kconfig option
Auer, Lukas
- [U-Boot] [PATCH v2 07/20] riscv: Introduce a Kconfig option for machine mode
Auer, Lukas
- [U-Boot] [PATCH v2 08/20] riscv: Add a SYSCON driver for SiFive's Core Local Interruptor
Auer, Lukas
- [U-Boot] [PATCH v2 09/20] riscv: Implement riscv_get_time() API using rdtime instruction
Auer, Lukas
- [U-Boot] [PATCH v2 13/20] riscv: Add CSR numbers
Auer, Lukas
- [U-Boot] [PATCH v2 14/20] riscv: Add exception codes for xcause register
Auer, Lukas
- [U-Boot] [PATCH v2 15/20] riscv: Add indirect stringification to csr_xxx ops
Auer, Lukas
- [U-Boot] [PATCH v2 16/20] riscv: Do some basic architecture level cpu initialization
Auer, Lukas
- [U-Boot] [PATCH 04/19] cpu: Add a RISC-V CPU driver
Auer, Lukas
- [U-Boot] [PATCH v3 08/25] riscv: Add a SYSCON driver for SiFive's Core Local Interruptor
Auer, Lukas
- [U-Boot] [PATCH v3 13/25] riscv: Remove non-DM version of print_cpuinfo()
Auer, Lukas
- [U-Boot] [PATCH v3 18/25] riscv: Do some basic architecture level cpu initialization
Auer, Lukas
- [U-Boot] [PATCH v3 23/25] riscv: Save boot hart id to the global data
Auer, Lukas
- [U-Boot] [PATCH v3 24/25] riscv: bootm: Change to use boot_hart from global data
Auer, Lukas
- [U-Boot] [PATCH v3 25/25] riscv: Remove ae350.dts
Auer, Lukas
- [U-Boot] [PATCH v3 16/25] riscv: Update supports_extension() to use desc from cpu driver
Auer, Lukas
- [U-Boot] [PATCH v3 16/25] riscv: Update supports_extension() to use desc from cpu driver
Auer, Lukas
- [U-Boot] [PATCH v4 16/25] riscv: Update supports_extension() to use desc from cpu driver
Auer, Lukas
- [U-Boot] [PATCH v5 06/25] riscv: ax25: Hide the ax25-specific Kconfig option
Auer, Lukas
- [U-Boot] [PATCH v4 16/25] riscv: Update supports_extension() to use desc from cpu driver
Auer, Lukas
- [U-Boot] [PATCH 0/6] Small fixes for RISC-V
Lukas Auer
- [U-Boot] [PATCH 1/6] riscv: clarify error message on undefined exceptions
Lukas Auer
- [U-Boot] [PATCH 2/6] riscv: remove invalid dcache flush implementation
Lukas Auer
- [U-Boot] [PATCH 3/6] riscv: remove RISC-V standalone linker script
Lukas Auer
- [U-Boot] [PATCH 4/6] riscv: replace use of callee-saved register in standalone
Lukas Auer
- [U-Boot] [PATCH 5/6] riscv: support standalone applications on RV64I systems
Lukas Auer
- [U-Boot] [PATCH 6/6] riscv: qemu: define standalone load address
Lukas Auer
- [U-Boot] [PATCH] pcm058: fix NAND flash not using badblock table
Stefano Babic
- [U-Boot] [PATCH v2] pcm058: fix NAND flash not using badblock table
Stefano Babic
- [U-Boot] [PATCH] nand: fix up badblock skipping
Stefano Babic
- [U-Boot] New item at list end for backwards compatibility
Stefano Babic
- [U-Boot] [PATCH v5] pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Stefano Babic
- [U-Boot] [PATCH 2/2] arm: imx8qxp: build u-boot-dtb.cfgout before checking files
Stefano Babic
- [U-Boot] [PATCH V3 1/6] board: ge: Remove EEPROM bus param from read_vpd()
Stefano Babic
- [U-Boot] [PATCH V3 2/6] board: ge: Move VPD EEPROM configuration to the defconfig
Stefano Babic
- [U-Boot] [PATCH V3 3/6] bootcount: i2c: Add bus switching to the I2C bootcount driver
Stefano Babic
- [U-Boot] [PATCH V3 4/6] bootcount: Configure length limit for I2C bootcount
Stefano Babic
- [U-Boot] [PATCH V3 5/6] board: ge: Move VPD reading to the vpd_reader
Stefano Babic
- [U-Boot] [PATCH V3 6/6] board: ge: Store bootcount in EEPROM on PPD and Bx50v3
Stefano Babic
- [U-Boot] [PATCH] warp7: configs: add CONFIG_FIT option
Stefano Babic
- [U-Boot] [PATCH v2 1/2] watchdog: driver support for fsl-lsch2
Stefano Babic
- [U-Boot] [PATCH v2 2/2] watchdog: imx: add config to disable wdog reset
Stefano Babic
- [U-Boot] [PATCH] w1: Add driver for i.MX bus master controller
Stefano Babic
- [U-Boot] [PATCH 2/3] configs: mx23_olinuxino_defconfig: fix status led definition
Stefano Babic
- [U-Boot] [PATCH 3/3] configs: mx23_olinuxino_defconfig: disable bootefi command
Stefano Babic
- [U-Boot] [PATCH 1/2] imx: imx8qxp_mek: imximage: remove config.h
Stefano Babic
- [U-Boot] [PATCH 1/1] embestmx6boards: Add SPL support
Stefano Babic
- [U-Boot] [PATCH] tools: improve portability of imx_cntr_image.sh
Stefano Babic
- [U-Boot] [PATCH 1/2] imx: mx8m: add memory mapping for CAAM and TCM
Stefano Babic
- [U-Boot] [PATCH 2/2] imx: bootaux: fix stack and pc assignment on 64-bit platforms
Stefano Babic
- [U-Boot] [PATCH v2] imx: hab: extend hab_auth_img to calculate ivt_offset
Stefano Babic
- [U-Boot] [PATCH V2 1/2] SPL: Add HAB image authentication to FIT
Stefano Babic
- [U-Boot] [PATCH v2 0/3] ARM: pinctrl: Provide pinctrl driver for Vybrid (vf610)
Stefano Babic
- [U-Boot] [PATCH] arm: imx7d: cl-som-imx7: migration to CONFIG_BLK
Stefano Babic
- [U-Boot] [PATCH v2] pcm058: fix NAND flash not using badblock table
Stefano Babic
- [U-Boot] New item at list end for backwards compatibility
Stefano Babic
- [U-Boot] [PATCH] imx: mx53ppd: fix build error
Stefano Babic
- [U-Boot] [PATCH] firmware: psci: introduce SPL_ARM_PSCI_FW
Stefano Babic
- [U-Boot] [PATCH V2 08/15] tools: add i.MX8M image support
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214
Stefano Babic
- [U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly
Stefano Babic
- [U-Boot] [PATCH] imx6: apalis: Make the boot process more generic
Stefano Babic
- [U-Boot] [PATCH] Restore compatibility of image type IDs
Stefano Babic
- [U-Boot] [PATCH] Restore compatibility of image type IDs
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214
Stefano Babic
- [U-Boot] [PATCH V2] Restore compatibility of image type IDs
Stefano Babic
- [U-Boot] [PATCH v4] pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Stefano Babic
- [U-Boot] Please pull u-boot-imx: u-boot-imx-20181217
Stefano Babic
- [U-Boot] Please pull u-boot-imx: u-boot-imx-20181217
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181217
Stefano Babic
- [U-Boot] [PATCH] arm: ti: boot: Increase system partition size
Bajjuri, Praneeth
- [U-Boot] [PATCH] arm: ti: boot: Increase system partition size
Bajjuri, Praneeth
- [U-Boot] [PATCH] arm: ti: boot: Increase system partition size
Bajjuri, Praneeth
- [U-Boot] [PATCH u-boot-marvell v3 09/10] board: turris_mox: Support 1 GB version of Turris Mox
Marek Behun
- [U-Boot] [PATCH u-boot-marvell v3 09/10] board: turris_mox: Support 1 GB version of Turris Mox
Marek Behun
- [U-Boot] FOSDEM Hardware Enablement Devroom
Marek Behún
- [U-Boot] [PATCH u-boot-marvell v3 06/10] watchdog: armada_37xx: Fix compliance with kernel's driver
Marek Behún
- [U-Boot] [PATCH u-boot-marvell v3 09/10] board: turris_mox: Support 1 GB version of Turris Mox
Marek Behún
- [U-Boot] [PATCH v4 00/10] Changes for Turris Mox
Marek Behún
- [U-Boot] [PATCH v4 01/10] arm: mvebu: turris_mox: Cosmetic restructurization
Marek Behún
- [U-Boot] [PATCH v4 02/10] arm: mvebu: turris_mox: Change SERDES map depending on module topology
Marek Behún
- [U-Boot] [PATCH v4 03/10] arm: mvebu: turris_mox: Check and configure modules
Marek Behún
- [U-Boot] [PATCH v4 04/10] arm: mvebu: dts: Fix Turris Mox device tree
Marek Behún
- [U-Boot] [PATCH v4 05/10] arm: mvebu: turris_mox: Update defconfig
Marek Behún
- [U-Boot] [PATCH v4 06/10] watchdog: armada_37xx: Fix compliance with kernel's driver
Marek Behún
- [U-Boot] [PATCH v4 07/10] MAINTAINERS: Add entry for CZ.NIC's Turris project
Marek Behún
- [U-Boot] [PATCH v4 08/10] arm: mvebu: turris_mox: Read info (and ethaddrs) from OTP
Marek Behún
- [U-Boot] [PATCH v4 09/10] arm: mvebu: turris_mox: Support 1 GB version of Turris Mox
Marek Behún
- [U-Boot] [PATCH v4 10/10] arm: mvebu: configs: turris_mox: Add 64 MiB of boot memory
Marek Behún
- [U-Boot] [PATCH 0/7] TF-A Boot support for NXP Chassis 3 platforms
Rajesh Bhagat
- [U-Boot] [PATCH 1/7] armv8: fsl-layerscape: fixes for TFABOOT framework
Rajesh Bhagat
- [U-Boot] [PATCH 2/7] drivers: ifc: restore the legacy flow for IFC config
Rajesh Bhagat
- [U-Boot] [PATCH 3/7] ls1043a: add support for nand-boot cmd for TFA
Rajesh Bhagat
- [U-Boot] [PATCH 4/7] armv8: ls1088ardb: Add TFABOOT support
Rajesh Bhagat
- [U-Boot] [PATCH 5/7] armv8: ls1088aqds: Add TFABOOT support
Rajesh Bhagat
- [U-Boot] [PATCH 6/7] armv8: ls2088ardb: Add TFABOOT support
Rajesh Bhagat
- [U-Boot] [PATCH 7/7] armv8: ls2088aqds: Add TFABOOT support
Rajesh Bhagat
- [U-Boot] [PATCH 1/1] efi_loader: efi_guid_t must be 64-bit aligned
Ard Biesheuvel
- [U-Boot] [RESEND][PATCH] power: regulator: denied disable on always-on regulator
Felix Brack
- [U-Boot] [PATCH] serial: omap: Add code for early debugging
Felix Brack
- [U-Boot] [RESEND][PATCH] power: regulator: denied disable on always-on regulator
Felix Brack
- [U-Boot] [PATCH] arm: dts: am33xx: Sync dts with Linux 4.20.0
Felix Brack
- [U-Boot] [PATCH] arm: am335x-pdu001: Move from embedded to separate DTB
Felix Brack
- [U-Boot] [PATCH v4 00/11] mtd/sf: Various fixes
Boris Brezillon
- [U-Boot] [PATCH v4 01/11] mtd: Add a function to report when the MTD dev list has been updated
Boris Brezillon
- [U-Boot] [PATCH v4 02/11] mtd: Parse mtdparts/mtdids again when the MTD list has been updated
Boris Brezillon
- [U-Boot] [PATCH v4 03/11] mtd: Delete partitions attached to the device when a device is deleted
Boris Brezillon
- [U-Boot] [PATCH v4 04/11] mtd: sf: Make sure we don't register the same device twice
Boris Brezillon
- [U-Boot] [PATCH v4 05/11] mtd: Use get_mtdids() instead of env_get("mtdids") in mtd_search_alternate_name()
Boris Brezillon
- [U-Boot] [PATCH v4 06/11] mtd: Be more strict on the "mtdparts=" prefix check
Boris Brezillon
- [U-Boot] [PATCH v4 07/11] mtd: Make sure the name passed in mtdparts fits in mtd_name[]
Boris Brezillon
- [U-Boot] [PATCH v4 08/11] mtd: Make sure we don't parse MTD partitions belonging to another dev
Boris Brezillon
- [U-Boot] [PATCH v4 09/11] mtd: Don't stop MTD partition creation when it fails on one device
Boris Brezillon
- [U-Boot] [PATCH v4 10/11] mtd: sf: Unregister the MTD device prior to removing the spi_flash obj
Boris Brezillon
- [U-Boot] [PATCH v4 11/11] mtd: sf: Make sf_mtd.c more robust
Boris Brezillon
- [U-Boot] [PATCH v3 0/6] cmd: Simplify support for sub-commands
Boris Brezillon
- [U-Boot] [PATCH v3 1/6] common: command: Fix command auto-completion
Boris Brezillon
- [U-Boot] [PATCH v3 2/6] common: command: Expose a generic helper to auto-complete sub commands
Boris Brezillon
- [U-Boot] [PATCH v3 3/6] common: command: Rework the 'cmd is repeatable' logic
Boris Brezillon
- [U-Boot] [PATCH v3 4/6] command: commands: Add macros to declare commands with subcmds
Boris Brezillon
- [U-Boot] [PATCH v3 5/6] cmd: mtd: Use the subcmd infrastructure to declare mtd sub-commands
Boris Brezillon
- [U-Boot] [PATCH v3 6/6] cmd: adc: Use the sub-command infrastructure
Boris Brezillon
- [U-Boot] [PATCH v3 5/6] cmd: mtd: Use the subcmd infrastructure to declare mtd sub-commands
Boris Brezillon
- [U-Boot] [PATCH v3 0/6] cmd: Simplify support for sub-commands
Boris Brezillon
- [U-Boot] [PATCH v4 0/6] cmd: Simplify support for sub-commands
Boris Brezillon
- [U-Boot] [PATCH v4 1/6] common: command: Fix command auto-completion
Boris Brezillon
- [U-Boot] [PATCH v4 2/6] common: command: Expose a generic helper to auto-complete sub commands
Boris Brezillon
- [U-Boot] [PATCH v4 3/6] common: command: Rework the 'cmd is repeatable' logic
Boris Brezillon
- [U-Boot] [PATCH v4 4/6] command: commands: Add macros to declare commands with subcmds
Boris Brezillon
- [U-Boot] [PATCH v4 5/6] cmd: mtd: Use the subcmd infrastructure to declare mtd sub-commands
Boris Brezillon
- [U-Boot] [PATCH v4 6/6] cmd: adc: Use the sub-command infrastructure
Boris Brezillon
- [U-Boot] [PATCH 0/2] cmd: auto-complete args starting with a $
Boris Brezillon
- [U-Boot] [PATCH 1/2] common: command: Provide a dollar_complete() helper
Boris Brezillon
- [U-Boot] [PATCH 2/2] cmd: mtd: auto-complete args starting with a $ when appropriate
Boris Brezillon
- [U-Boot] [PATCH 0/2] cmd: auto-complete args starting with a $
Boris Brezillon
- [U-Boot] [PATCH 0/2] cmd: auto-complete args starting with a $
Boris Brezillon
- [U-Boot] [RFC PATCH v2 09/11] sf_mtd: Simply mtd operations
Boris Brezillon
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Boris Brezillon
- [U-Boot] [PATCH 0/2] cmd: auto-complete args starting with a $
Boris Brezillon
- [U-Boot] [PATCH 0/2] cmd: auto-complete args starting with a $
Boris Brezillon
- [U-Boot] [PATCH v2] common: command: Add support for $ auto-completion
Boris Brezillon
- [U-Boot] [PATCH v3 02/28] mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND
Boris Brezillon
- [U-Boot] [PATCH v3 03/28] mtd: rename CONFIG_MTD -> CONFIG_DM_MTD
Boris Brezillon
- [U-Boot] [PATCH v3 04/28] mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTD
Boris Brezillon
- [U-Boot] [PATCH v3 05/28] mtd: ensure MTD is compiled when there is a NOR flash
Boris Brezillon
- [U-Boot] [PATCH v3 01/28] Makefile: move MTD-related lines in coherent Makefiles
Boris Brezillon
- [U-Boot] [PATCH v3 06/28] mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flash
Boris Brezillon
- [U-Boot] [PATCH v3 07/28] mtd: ensure MTD is compiled when there is a SPI NOR flash using MTD
Boris Brezillon
- [U-Boot] [PATCH v3 08/28] mtd: ensure UBI is compiled when using fastmap
Boris Brezillon
- [U-Boot] [PATCH v3 09/28] mtd: ensure MTD is compiled when UBI is used
Boris Brezillon
- [U-Boot] [PATCH v3 10/28] mtd: ensure UBI is compiled when CMD_UBI is selected
Boris Brezillon
- [U-Boot] [PATCH v3 11/28] mtd: ensure UBI is compiled when ENV_IS_IN_UBI is selected
Boris Brezillon
- [U-Boot] [PATCH v3 12/28] mtd: ensure MTD_RAW_NAND is compiled when ENV_IS_IN_NAND is selected
Boris Brezillon
- [U-Boot] [PATCH v3 13/28] mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected
Boris Brezillon
- [U-Boot] [PATCH v3 14/28] mtd: ensure CMD_NAND is compiled when its options are selected
Boris Brezillon
- [U-Boot] [PATCH v3 15/28] mtd: ensure MTD is compiled when CMD_MTDPARTS is selected
Boris Brezillon
- [U-Boot] [PATCH v3 24/28] cmd: mtdparts: show Kconfig options only if the command is selected
Boris Brezillon
- [U-Boot] [PATCH v3 16/28] configs: move CONFIG_MTD in defconfigs when set in arch includes
Boris Brezillon
- [U-Boot] [PATCH v3 17/28] configs: remove raw NAND core from k2g defconfigs
Boris Brezillon
- [U-Boot] [PATCH v3 18/28] configs: remove MTD support from bcm11130 and M54418TWR defconfigs
Boris Brezillon
- [U-Boot] [PATCH v3 19/28] mtd: nand: add includes in NAND core to avoid warnings
Boris Brezillon
- [U-Boot] [PATCH v3 20/28] dfu: add dependency on the NAND core
Boris Brezillon
- [U-Boot] [PATCH v3 22/28] mtd: nand: remove dependency on commands in Kconfig
Boris Brezillon
- [U-Boot] [PATCH v3 21/28] mtd: nor: NOR flashes depend on MTD
Boris Brezillon
- [U-Boot] [PATCH v3 25/28] cmd: nand/sf: isolate legacy code
Boris Brezillon
- [U-Boot] [PATCH v3 23/28] mtd: ubi: remove dependency on command in Kconfig
Boris Brezillon
- [U-Boot] [PATCH v3 26/28] cmd: make MTD commands depend on MTD
Boris Brezillon
- [U-Boot] [PATCH v3 28/28] mtd: properly handle SPL kbuild lines
Boris Brezillon
- [U-Boot] [PATCH v3 26/28] cmd: make MTD commands depend on MTD
Boris Brezillon
- [U-Boot] [PATCH v4 00/11] mtd/sf: Various fixes
Boris Brezillon
- [U-Boot] [PATCH v3 13/28] mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected
Boris Brezillon
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Boris Brezillon
- [U-Boot] [PATCH v4 00/11] mtd/sf: Various fixes
Boris Brezillon
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Boris Brezillon
- [U-Boot] [PATCH 1/2] configs: igep: Define default mtdids/mtdparts
Boris Brezillon
- [U-Boot] [PATCH 2/2] mtd: Get rid of board_mtdparts_default()
Boris Brezillon
- [U-Boot] [PATCH v4 1/6] common: command: Fix command auto-completion
Boris Brezillon
- [U-Boot] [PATCH 2/2] mtd: Get rid of board_mtdparts_default()
Boris Brezillon
- [U-Boot] [PATCH 2/2] mtd: Get rid of board_mtdparts_default()
Boris Brezillon
- [U-Boot] [PATCH 09/16] sf_mtd: Simply mtd operations
Boris Brezillon
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Boris Brezillon
- [U-Boot] [PATCH 10/16] configs: Get rid of SPI_FLASH_BAR
Boris Brezillon
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Boris Brezillon
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Boris Brezillon
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Boris Brezillon
- [U-Boot] [PATCH v3 1/5] Kconfig: Migrate BOUNCE_BUFFER
Alexey Brodkin
- [U-Boot] [PATCH v3 5/5] arc: select BOUNCE_BUFFER for CMD_NAND on AXS10x
Alexey Brodkin
- [U-Boot] Please pull ARC changes
Alexey Brodkin
- [U-Boot] [PATCH v3 1/5] Kconfig: Migrate BOUNCE_BUFFER
Alexey Brodkin
- [U-Boot] [PATCH v3 1/5] Kconfig: Migrate BOUNCE_BUFFER
Alexey Brodkin
- [U-Boot] [PATCH v3 5/5] arc: select BOUNCE_BUFFER for CMD_NAND on AXS10x
Alexey Brodkin
- [U-Boot] [PATCH] travis: Bump ARC tools to arc-2018.09
Alexey Brodkin
- [U-Boot] [PATCH 2/4] Convert CONFIG_BOARD_TYPES to Kconfig
Alexey Brodkin
- [U-Boot] [PATCH] pinctrl: meson: Fix GPIO direction registers access
Jerome Brunet
- [U-Boot] [PATCH u-boot] arm: dts: s400: Fix status for eMMC and SDIO ports
Jerome Brunet
- [U-Boot] [PATCH 0/6] Add support for MIPS Creator CI20
Paul Burton
- [U-Boot] MIPS (mt7688): EBase change in U-Boot breaks Linux
Paul Burton
- [U-Boot] MIPS (mt7688): EBase change in U-Boot breaks Linux
Paul Burton
- [U-Boot] MIPS (mt7688): EBase change in U-Boot breaks Linux
Paul Burton
- [U-Boot] [RESEND][PATCH] power: regulator: denied disable on always-on regulator
Patrice CHOTARD
- [U-Boot] [U-Boot, v2] fs: fat: assign rootdir sector when accessing root directory
Patrice CHOTARD
- [U-Boot] [PATCH v3 0/7] ] Add support for the SoCs found in Microsemi switches
Gregory CLEMENT
- [U-Boot] [PATCH v3 1/7] MIPS: move create_tlb() in an proper header: mipsregs.h
Gregory CLEMENT
- [U-Boot] [PATCH v3 2/7] MIPS: Allow to prefetch and lock instructions into cache
Gregory CLEMENT
- [U-Boot] [PATCH v3 3/7] MSCC: add support for Ocelot SoCs
Gregory CLEMENT
- [U-Boot] [PATCH v3 4/7] MSCC: add support for Luton SoCs
Gregory CLEMENT
- [U-Boot] [PATCH v3 5/7] MSCC: add board support for the Ocelots based evaluation boards
Gregory CLEMENT
- [U-Boot] [PATCH v3 6/7] MSCC: add board support for the Luton based evaluation board
Gregory CLEMENT
- [U-Boot] [PATCH v3 7/7] MIPS: bootm: Add support for Vcore III linux kernel
Gregory CLEMENT
- [U-Boot] [PATCH v3] pinctrl: mscc: Add gpio and pinctrl driver for MSCC MIPS SoCs (VcoreIII based)
Gregory CLEMENT
- [U-Boot] [PATCH v2] gpio: mscc-bitbang-spi: Add a simple gpio driver for bitbgang spi
Gregory CLEMENT
- [U-Boot] [PATCH v3 3/7] MSCC: add support for Ocelot SoCs
Gregory CLEMENT
- [U-Boot] [PATCH v3 4/7] MSCC: add support for Luton SoCs
Gregory CLEMENT
- [U-Boot] [PATCH v3 5/7] MSCC: add board support for the Ocelots based evaluation boards
Gregory CLEMENT
- [U-Boot] [PATCH v3 7/7] MIPS: bootm: Add support for Vcore III linux kernel
Gregory CLEMENT
- [U-Boot] [PATCH v4 0/7] Add support for the SoCs found in Microsemi switches
Gregory CLEMENT
- [U-Boot] [PATCH v4 1/7] MIPS: move create_tlb() in an proper header: mipsregs.h
Gregory CLEMENT
- [U-Boot] [PATCH v4 2/7] MIPS: Allow to prefetch and lock instructions into cache
Gregory CLEMENT
- [U-Boot] [PATCH v4 3/7] MSCC: add support for Ocelot SoCs
Gregory CLEMENT
- [U-Boot] [PATCH v4 4/7] MSCC: add support for Luton SoCs
Gregory CLEMENT
- [U-Boot] [PATCH v4 5/7] MSCC: add board support for the Ocelots based evaluation boards
Gregory CLEMENT
- [U-Boot] [PATCH v4 6/7] MSCC: add board support for the Luton based evaluation board
Gregory CLEMENT
- [U-Boot] [PATCH v4 7/7] MIPS: bootm: Add support for compatibility with redboot
Gregory CLEMENT
- [U-Boot] [PATCH v4 6/7] MSCC: add board support for the Luton based evaluation board
Gregory CLEMENT
- [U-Boot] [PATCH v4 6/7] MSCC: add board support for the Luton based evaluation board
Gregory CLEMENT
- [U-Boot] [PATCH v4 6/7] MSCC: add board support for the Luton based evaluation board
Gregory CLEMENT
- [U-Boot] [PATCH] spi: soft_spi: Fix null ptr when probing soft_spi.
Gregory CLEMENT
- [U-Boot] [PATCH] pinctrl: meson: Fix GPIO direction registers access
Carlo Caione
- [U-Boot] [PATCH] pinctrl: meson: axg: Fix GPIO pin offsets
Carlo Caione
- [U-Boot] u-boot-rockchip: firefly-rk3288 hangs on: Loading Environment from MMC
Vagrant Cascadian
- [U-Boot] [PATCH v2] rockchip: sdram-common: fix wrong size for 4GB in 32bit SoC
Vagrant Cascadian
- [U-Boot] [PATCH] Add support for initializing MMC
Chee, Tien Fong
- [U-Boot] [PATCH 1/9] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Chee, Tien Fong
- [U-Boot] [PATCH] Add support for initializing MMC
Chee, Tien Fong
- [U-Boot] [PATCH] Add support for initializing MMC
Chee, Tien Fong
- [U-Boot] [PATCH] Add support for initializing MMC
Chee, Tien Fong
- [U-Boot] [PATCH v2] Add support for initializing MMC
Chee, Tien Fong
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Rick Chen
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Rick Chen
- [U-Boot] Please pull u-boot-riscv
Rick Chen
- [U-Boot] [PATCH v2 06/20] riscv: ax25: Hide the ax25-specific Kconfig option
Rick Chen
- [U-Boot] [PATCH v2 06/20] riscv: ax25: Hide the ax25-specific Kconfig option
Rick Chen
- [U-Boot] [PATCH v2 06/20] riscv: ax25: Hide the ax25-specific Kconfig option
Rick Chen
- [U-Boot] policy regarding unused code
Rick Chen
- [U-Boot] [PATCH v2 06/20] riscv: ax25: Hide the ax25-specific Kconfig option
Rick Chen
- [U-Boot] [PATCH v5 06/25] riscv: ax25: Hide the ax25-specific Kconfig option
Rick Chen
- [U-Boot] [PATCH v5 00/25] riscv: Adding RISC-V CPU and timer driver
Rick Chen
- [U-Boot] [PATCH v2 0/2] SiFive UART support
Rick Chen
- [U-Boot] [PATCH] riscv: configs: Rename ax25-ae350 defconfig
Rick Chen
- [U-Boot] [PATCH v2 0/2] SiFive UART support
Rick Chen
- [U-Boot] [PATCH v3 2/3] MAINTAINERS: Sync for ax25-ae350 rename
Rick Chen
- [U-Boot] [PATCH v3 2/3] MAINTAINERS: Sync for ax25-ae350 rename
Rick Chen
- [U-Boot] [PATCH 0/5] Update STM32 gpio and pinctrl drivers
Patrice Chotard
- [U-Boot] [PATCH 1/5] pinctrl: stm32: Move gpio_dev list filling outside probe()
Patrice Chotard
- [U-Boot] [PATCH 2/5] gpio: stm32f7: Add gpio bank holes management
Patrice Chotard
- [U-Boot] [PATCH 3/5] gpio: stm32f7: Move STM32_GPIOS_PER_BANK into gpio.h
Patrice Chotard
- [U-Boot] [PATCH 4/5] gpio: stm32f7: Remove CONFIG_CLK flag.
Patrice Chotard
- [U-Boot] [PATCH 5/5] pinctrl: stm32: Update stm32_pinctrl_get_gpio_dev()
Patrice Chotard
- [U-Boot] [PATCH] serial: serial_stm32: Add reset support
Patrice Chotard
- [U-Boot] [RFC][PATCH] cmd: pxe: Display splashscreen from extlinux.conf input
Patrice Chotard
- [U-Boot] [PATCH] api: storage: Fix enumeration of storage devices
Cristian Ciocaltea
- [U-Boot] [PATCH] cmd: bmp: manage centered display
Patrick DELAUNAY
- [U-Boot] [PATCH v2] syscon: update syscon_node_to_regmap to use the DM functions
Patrick DELAUNAY
- [U-Boot] [PATCH v2 1/2] spl_spi: Read default speed and mode values from DT
Patrick DELAUNAY
- [U-Boot] [PATCH 0/7] Remove defines for SPI default speed and mode
Patrick DELAUNAY
- [U-Boot] [PATCH 3/7] da850evm: sf: Read default speed and mode values from DT
Patrick DELAUNAY
- [U-Boot] [PATCH v2 1/2] spl_spi: Read default speed and mode values from DT
Patrick DELAUNAY
- [U-Boot] [PATCH v2 0/2] Read default speed and mode values from DT
Patrick DELAUNAY
- [U-Boot] [PATCH 1/2] drivers: serial: Add SiFive UART driver
Palmer Dabbelt
- [U-Boot] [PATCH 2/2] riscv: qemu: Enable SiFive UART driver in defconfigs
Palmer Dabbelt
- [U-Boot] [PATCH 6/7] defconfigs: Add config for AM57xx High Security EVM with UART/USB Boot support
Andrew F. Davis
- [U-Boot] [PATCH 6/7] defconfigs: Add config for AM57xx High Security EVM with UART/USB Boot support
Andrew F. Davis
- [U-Boot] [PATCH v2 0/7] Add USB boot to HS DRA7xx/AM57xx
Andrew F. Davis
- [U-Boot] [PATCH v2 1/7] spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFU
Andrew F. Davis
- [U-Boot] [PATCH v2 2/7] dfu: Make DFU support more SPL friendly
Andrew F. Davis
- [U-Boot] [PATCH v2 3/7] dfu: Remove dependency on HUSH parser in SPL
Andrew F. Davis
- [U-Boot] [PATCH v2 4/7] ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry point
Andrew F. Davis
- [U-Boot] [PATCH v2 5/7] defconfigs: Add config for DRA7xx High Security EVM with USB Boot support
Andrew F. Davis
- [U-Boot] [PATCH v2 6/7] defconfigs: Add config for AM57xx High Security EVM with USB/UART Boot support
Andrew F. Davis
- [U-Boot] [PATCH v2 7/7] doc: ti-secure: Add ULO info for AM57xx/DRA7xx secure devices from TI
Andrew F. Davis
- [U-Boot] [PATCH] defconfigs: am335x_hs_evm: Sync HS and non-HS defconfigs
Andrew F. Davis
- [U-Boot] policy regarding unused code
Robert P. J. Day
- [U-Boot] [PATCH 0/7] Remove defines for SPI default speed and mode
Patrick Delaunay
- [U-Boot] [PATCH 1/7] spi: update management of default speed and mode
Patrick Delaunay
- [U-Boot] [PATCH 2/7] spi: add comment for spi_flash_probe_bus_cs function
Patrick Delaunay
- [U-Boot] [PATCH 3/7] da850evm: sf: Read default speed and mode values from DT
Patrick Delaunay
- [U-Boot] [PATCH 4/7] dfu: sf: Read default speed and mode values from DT
Patrick Delaunay
- [U-Boot] [PATCH 5/7] mips: mt76xx: gardena-smart-gateway: Read default speed and mode values from DT
Patrick Delaunay
- [U-Boot] [PATCH 6/7] env: Read default speed and mode values from DT
Patrick Delaunay
- [U-Boot] [PATCH 7/7] spi: remove define for SPI default SPEED and MODE
Patrick Delaunay
- [U-Boot] [PATCH v4] pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Wolfgang Denk
- [U-Boot] [PATCH] env: add flash_read function
Wolfgang Denk
- [U-Boot] adding saveenv-command for bananapi r2
Wolfgang Denk
- [U-Boot] [PATCH v4] pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Wolfgang Denk
- [U-Boot] [PATCH v4] pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Wolfgang Denk
- [U-Boot] [PATCH 0/2] cmd: auto-complete args starting with a $
Wolfgang Denk
- [U-Boot] [PATCH 0/2] cmd: auto-complete args starting with a $
Wolfgang Denk
- [U-Boot] [PATCH 0/2] cmd: auto-complete args starting with a $
Wolfgang Denk
- [U-Boot] [PATCH v4] pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Wolfgang Denk
- [U-Boot] [PATCH v4] pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Wolfgang Denk
- [U-Boot] [PATCH] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Wolfgang Denk
- [U-Boot] [PATCH] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Wolfgang Denk
- [U-Boot] [PATCH v3 13/28] mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected
Wolfgang Denk
- [U-Boot] [PATCH v3 06/28] mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flash
Wolfgang Denk
- [U-Boot] [PATCH v3 05/28] mtd: ensure MTD is compiled when there is a NOR flash
Wolfgang Denk
- [U-Boot] [PATCH v3 21/28] mtd: nor: NOR flashes depend on MTD
Wolfgang Denk
- [U-Boot] network not work with u-boot
Wolfgang Denk
- [U-Boot] [PATCH v3 13/28] mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected
Wolfgang Denk
- [U-Boot] [PATCH v3 13/28] mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected
Wolfgang Denk
- [U-Boot] network not work with u-boot
Wolfgang Denk
- [U-Boot] [PATCH v3 13/28] mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected
Wolfgang Denk
- [U-Boot] [PATCH] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Wolfgang Denk
- [U-Boot] [PATCH] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Wolfgang Denk
- [U-Boot] [PATCH v2] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Wolfgang Denk
- [U-Boot] [PATCH] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Wolfgang Denk
- [U-Boot] [PATCH v3 13/28] mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected
Wolfgang Denk
- [U-Boot] [PATCH v4 00/10] Improvements for the dwc3_generic driver
Loic Devulder
- [U-Boot] [PATCH v2] efi_loader: Make RTS relocation more robust
Loic Devulder
- [U-Boot] [PATCH] dm: Tidy up 'dm tree' output when there are many devices
Liviu Dudau
- [U-Boot] [PATCH v3 03/11] drivers: spi: cf_spi: convert to driver model
Angelo Dureghello
- [U-Boot] [PATCH v3 03/11] drivers: spi: cf_spi: convert to driver model
Angelo Dureghello
- [U-Boot] [PATCH v4 01/12] m68k: add basic set of devicetrees
Angelo Dureghello
- [U-Boot] [PATCH v4 02/12] m68k: architecture changes to support fdt
Angelo Dureghello
- [U-Boot] [PATCH v4 03/12] m68k: add initial dts files for all m68k boards
Angelo Dureghello
- [U-Boot] [PATCH v4 04/12] m68k: enabling long jumps on mcf54x5 SoCs
Angelo Dureghello
- [U-Boot] [PATCH v4 05/12] configs: enable use of DT for all m68k boards
Angelo Dureghello
- [U-Boot] [PATCH v4 06/12] drivers: spi: cf_spi: add Kconfig option
Angelo Dureghello
- [U-Boot] [PATCH v4 07/12] drivers: spi: cf_spi: convert to driver model
Angelo Dureghello
- [U-Boot] [PATCH v4 08/12] configs: add DM_SPI config option
Angelo Dureghello
- [U-Boot] [PATCH v4 09/12] drivers: serial: mcfuart: add DT support
Angelo Dureghello
- [U-Boot] [PATCH v4 10/12] configs: remove CONFIG_SYS_DSPI_XX references
Angelo Dureghello
- [U-Boot] [PATCH v4 11/12] m68k: add OF control support to m68k
Angelo Dureghello
- [U-Boot] [PATCH v4 12/12] m68k: move dspi bus control functions into cf_spi.c driver
Angelo Dureghello
- [U-Boot] Armada 8k IO windows
Dirk Eibach
- [U-Boot] [PATCH] poplar: save environment at a different offset
Alex Elder
- [U-Boot] [PATCH v1 0/3] ddr: vybrid: Support for vf610 built-in DDR3 memory calibration
Fabio Estevam
- [U-Boot] [PATCH] rockchip: rk3288: dts: remove 'vmmc' from emmc node
Fabio Estevam
- [U-Boot] [PATCH v4] pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Fabio Estevam
- [U-Boot] [PATCH v4] pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Fabio Estevam
- [U-Boot] [PATCH v4] pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Fabio Estevam
- [U-Boot] [PATCH v4] pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Fabio Estevam
- [U-Boot] [PATCH] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Fabio Estevam
- [U-Boot] [PATCH] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Fabio Estevam
- [U-Boot] [PATCH] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Fabio Estevam
- [U-Boot] [PATCH] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Fabio Estevam
- [U-Boot] [PATCH] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Fabio Estevam
- [U-Boot] [PATCH] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Fabio Estevam
- [U-Boot] [PATCH] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Fabio Estevam
- [U-Boot] [PATCH] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Fabio Estevam
- [U-Boot] [PATCH v5] pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Fabio Estevam
- [U-Boot] [PATCH v2] mmc: fsl_esdhc: Avoid infinite loop in esdhc_send_cmd_common()
Fabio Estevam
- [U-Boot] [imx/next] tools: imx8m_image: use bash
Fabio Estevam
- [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214
Fabio Estevam
- [U-Boot] [PATCH v4] pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Fabio Estevam
- [U-Boot] [PATCH v4] pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Fabio Estevam
- [U-Boot] Please pull u-boot-imx: u-boot-imx-20181217
Fabio Estevam
- [U-Boot] i.MX8MQ-EVK with ext4 read support
Fabio Estevam
- [U-Boot] [imx/next V2] tools: imx8m_image: use bash
Fabio Estevam
- [U-Boot] i.MX8M layout, rephrased
Fabio Estevam
- [U-Boot] [PATCH] imx8mq_evk_defconfig: Move file system options to Kconfig
Fabio Estevam
- [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181217
Fabio Estevam
- [U-Boot] [PATCH] imx8m: clock: Fix oscilattor values
Fabio Estevam
- [U-Boot] [PATCH v2] imx8m: clock: Fix oscillator values
Fabio Estevam
- [U-Boot] [PATCH v2] imx8mq_evk_defconfig: Move file system options to Kconfig
Fabio Estevam
- [U-Boot] [PATCH] imx8mq_evk_defconfig: Move file system options to Kconfig
Fabio Estevam
- [U-Boot] boot.bin on SD Card for SAMA5D3 Xplained
Daniel Evans
- [U-Boot] boot.bin on SD Card for SAMA5D3 Xplained
Daniel Evans
- [U-Boot] [PATCH V2 05/15] imx: rename mx8m,MX8M to imx8m,IMX8M
Peng Fan
- [U-Boot] [PATCH] imx8m: ddr: removed unused macros
Peng Fan
- [U-Boot] [PATCH] imx: mx53ppd: fix build error
Peng Fan
- [U-Boot] [PATCH] firmware: psci: introduce SPL_ARM_PSCI_FW
Peng Fan
- [U-Boot] [imx/next] tools: imx8m_image: use bash
Peng Fan
- [U-Boot] [PATCH 1/3] mx7: Do not call lcdif_power_down() in the SPL case
Peng Fan
- [U-Boot] [imx/next] tools: imx8m_image: use bash
Peng Fan
- [U-Boot] [imx/next V2] tools: imx8m_image: use bash
Peng Fan
- [U-Boot] [imx/next V2] tools: imx8m_image: use bash
Peng Fan
- [U-Boot] [PATCH V2 08/15] tools: add i.MX8M image support
Peng Fan
- [U-Boot] [PATCH] MAINTAINERS: update NXP i.MX mail list address
Peng Fan
- [U-Boot] Quick question on i.MX8MQ
Peng Fan
- [U-Boot] [PATCH V2] MAINTAINERS: update NXP i.MX mail list address
Peng Fan
- [U-Boot] [PATCH 0/5] imx8: several fixes
Peng Fan
- [U-Boot] [PATCH 1/5] clk: imx8: fix build warning
Peng Fan
- [U-Boot] [PATCH 2/5] misc: imx: scu: avoid write null pointer
Peng Fan
- [U-Boot] [PATCH 3/5] misc: imx8: scu: use platdata instead of priv data
Peng Fan
- [U-Boot] [PATCH 4/5] imx8: cpu: correct info
Peng Fan
- [U-Boot] [PATCH 5/5] tools: imx8image: set dcd_skip to true
Peng Fan
- [U-Boot] [PATCH 3/5] misc: imx8: scu: use platdata instead of priv data
Peng Fan
- [U-Boot] i.MX8M layout, rephrased
Peng Fan
- [U-Boot] [PATCH 00/10] i.MX8QXP: MEK: support SPL
Peng Fan
- [U-Boot] [PATCH 01/10] imx8qxp: add SUPPORT_SPL option
Peng Fan
- [U-Boot] [PATCH 02/10] imx8: scu: use dedicated MU for SPL
Peng Fan
- [U-Boot] [PATCH 03/10] arm: imx: build mach-imx for i.MX8
Peng Fan
- [U-Boot] [PATCH 04/10] gpio: introduce CONFIG_SPL_DM_PCA953X
Peng Fan
- [U-Boot] [PATCH 05/10] spl: imx8: add spl boot device
Peng Fan
- [U-Boot] [PATCH 06/10] dts: imx8qxp-mek: introduce u-boot dtsi
Peng Fan
- [U-Boot] [PATCH 07/10] imx: mkimage_fit_atf: introduce BL33_BASE_ADDR
Peng Fan
- [U-Boot] [PATCH 08/10] imx: build flash.bin for i.MX8
Peng Fan
- [U-Boot] [PATCH 09/10] imx8qxp: mek: default enable SPL
Peng Fan
- [U-Boot] [PATCH 10/10] imx8qxp: mek: update README
Peng Fan
- [U-Boot] [PATCH] imx: Add Makefile dependency for mkimage_fit_atf.sh
Peng Fan
- [U-Boot] [PATCH] imx: Add Makefile dependency for mkimage_fit_atf.sh
Peng Fan
- [U-Boot] [PATCH] imx: Add Makefile dependency for mkimage_fit_atf.sh
Peng Fan
- [U-Boot] [PATCH V2 00/10] i.MX8QXP: MEK: support SPL
Peng Fan
- [U-Boot] [PATCH V2 01/10] imx8qxp: add SUPPORT_SPL option
Peng Fan
- [U-Boot] [PATCH V2 02/10] imx8: scu: use dedicated MU for SPL
Peng Fan
- [U-Boot] [PATCH V2 03/10] arm: imx: build mach-imx for i.MX8
Peng Fan
- [U-Boot] [PATCH V2 04/10] gpio: introduce CONFIG_SPL_DM_PCA953X
Peng Fan
- [U-Boot] [PATCH V2 05/10] spl: imx8: add spl boot device
Peng Fan
- [U-Boot] [PATCH V2 06/10] dts: imx8qxp-mek: introduce u-boot dtsi
Peng Fan
- [U-Boot] [PATCH V2 07/10] imx: mkimage_fit_atf: introduce BL33_BASE_ADDR
Peng Fan
- [U-Boot] [PATCH V2 08/10] imx: build flash.bin for i.MX8
Peng Fan
- [U-Boot] [PATCH V2 09/10] imx8qxp: mek: default enable SPL
Peng Fan
- [U-Boot] [PATCH V2 10/10] imx8qxp: mek: update README
Peng Fan
- [U-Boot] [PATCH 01/10] pinctrl: imx8: add i.MX8QM compatible
Peng Fan
- [U-Boot] [PATCH 02/10] dt-bindings: pinctrl: add i.MX8QM pads definition
Peng Fan
- [U-Boot] [PATCH 03/10] dt-bindings: clock: dt-bindings: pinctrl: add i.MX8QM clocks definition
Peng Fan
- [U-Boot] [PATCH 04/10] arm: dts: introduce dtsi for i.MX8QM
Peng Fan
- [U-Boot] [PATCH 05/10] imx8: add cpu support
Peng Fan
- [U-Boot] [PATCH 06/10] clk: imx8: split code into common and soc specific part
Peng Fan
- [U-Boot] [PATCH 07/10] clk: imx8: add i.MX8QM clk driver
Peng Fan
- [U-Boot] [PATCH 08/10] imx8: imx8-pins: add i.MX8QM
Peng Fan
- [U-Boot] [PATCH 09/10] misc: imx8: scu: add i.MX8QM support
Peng Fan
- [U-Boot] [PATCH 10/10] imx: support i.MX8QM MEK board
Peng Fan
- [U-Boot] [PATCH] mmc: support hs400 enhanced strobe mode
Peng Fan
- [U-Boot] [PATCH] imx8mq_evk_defconfig: Move file system options to Kconfig
Peng Fan
- [U-Boot] [PATCH] ARM: DTS: Resync am3517-evm.dts with Linux 4.20
Adam Ford
- [U-Boot] [PATCH] ARM: DTS: Resync LogicPD SOM-LV with Linux 4.20
Adam Ford
- [U-Boot] [PATCH] ARM: DTS: Resync LogicPD-Torpedo-37xx-devkit with Linux 4.20
Adam Ford
- [U-Boot] [PATCH 1/3] ARM: DTS: da850: Sync from Linux 4.20
Adam Ford
- [U-Boot] [PATCH 2/3] ARM: dts: da850-lcdk: Sync from Linux 4.20
Adam Ford
- [U-Boot] [PATCH 3/3] ARM: DTS: da850-evm: Re-sync da850-evm.dts from Linux 4.20
Adam Ford
- [U-Boot] [PATCH v3 00/19] DM_I2C_COMPAT removal for all ti platforms
Adam Ford
- [U-Boot] [PATCH] ARM: omap3_logic/omap35_logic: Move to DM_USB
Adam Ford
- [U-Boot] [PATCH] ARM: omap3logic: Remove legacy USB code in favor of DM_USB
Adam Ford
- [U-Boot] [PATCH 0/7] Remove defines for SPI default speed and mode
Adam Ford
- [U-Boot] [PATCH v2 0/2] Read default speed and mode values from DT
Adam Ford
- [U-Boot] [PATCH] Drivers: USB: Remove Legacy CONFIG_USB_DAVINCI
Adam Ford
- [U-Boot] [PATCH] Drivers: USB: MUSB: Remove legacy CONFIG_USB_DA8XX
Adam Ford
- [U-Boot] [PATCH 0/7] Remove defines for SPI default speed and mode
Adam Ford
- [U-Boot] [PATCH] am3517_evm: Use ttyS2 instead of ttyO2
Adam Ford
- [U-Boot] [PATCH v2 1/2] spl_spi: Read default speed and mode values from DT
Adam Ford
- [U-Boot] [PATCH] ARM: davinci: Orphan Spectrum Digital AM18xx EVM
Adam Ford
- [U-Boot] [PATCH] Drivers: USB: MUSB: Remove legacy CONFIG_USB_DA8XX
Adam Ford
- [U-Boot] [PATCH V2] Drivers: USB: Remove Legacy CONFIG_USB_DAVINCI
Adam Ford
- [U-Boot] [PATCH V2] Drivers: USB: MUSB: Remove legacy CONFIG_USB_DA8XX
Adam Ford
- [U-Boot] [PATCH] ARM: mach-omap2: omap3: Fix GPIO clocking in SPL
Adam Ford
- [U-Boot] [PATCH V2] ARM: mach-omap2: omap3: Fix GPIO clocking in SPL
Adam Ford
- [U-Boot] [PATCH] ARM: mach-omap2: omap3: Fix GPIO clocking in SPL
Adam Ford
- [U-Boot] [PATCH] omap3: beagle: Enable DM_MMC and BLK for u-boot only, not SPL
Adam Ford
- [U-Boot] [PATCH 1/2] USB: musb-new: omap2430: Prep driver for Peripheral support.
Adam Ford
- [U-Boot] [PATCH 2/2] USB: musb-new: omap2430: Add hooks for Peripheral support.
Adam Ford
- [U-Boot] [PATCH] omap3: beagle: Enable DM_MMC and BLK for u-boot only, not SPL
Adam Ford
- [U-Boot] [PATCH v4 06/10] dm: usb: create a new UCLASS ID for USB gadget devices
Adam Ford
- [U-Boot] [PATCH 2/2] USB: musb-new: omap2430: Add hooks for Peripheral support.
Adam Ford
- [U-Boot] [PATCH v4 06/10] dm: usb: create a new UCLASS ID for USB gadget devices
Adam Ford
- [U-Boot] [PATCH V2 1/2] USB: musb-new: omap2430: Prep driver for Peripheral support.
Adam Ford
- [U-Boot] [PATCH V2 2/2] USB: musb-new: omap2430: Add hooks for Peripheral support.
Adam Ford
- [U-Boot] [PATCH] imx6q_logic: Enable MMC booting from SPL
Adam Ford
- [U-Boot] [PATCH] imx6q_logic: Enable MMC booting from SPL
Adam Ford
- [U-Boot] [PATCH V2] imx6q_logic: Enable MMC booting from SPL
Adam Ford
- [U-Boot] [PATCH 2/2] ARM: DTS: imx6q-logicpd: Update DTS/DTSI files
Adam Ford
- [U-Boot] [PATCH] ARM: imx6q_logic: Enable DM_USB and dependent regulators
Adam Ford
- [U-Boot] [PATCH] ARM: imx6q_logic: Enable Falcon Mode and fatwrite
Adam Ford
- [U-Boot] [PATCH] MTD: nand: mxs_nand_spl: Fix empty function pointer for BBT
Adam Ford
- [U-Boot] [PATCH] net: macb: fix mapping of registers
Ramon Fried
- [U-Boot] [PATCH] net: macb: fix mapping of registers
Ramon Fried
- [U-Boot] [PATCH v2] net: macb: fix mapping of registers
Ramon Fried
- [U-Boot] [PATCH] spi: cadence_qspi: remap iomem registers instead of just mapping
Ramon Fried
- [U-Boot] [U-Boot,v2] net: macb: fix mapping of registers
Ramon Fried
- [U-Boot] [PATCH v2] net: macb: fix mapping of registers
Ramon Fried
- [U-Boot] [PATCH] driver/spi: fsl_qspi: Remove non-DM stuff
Schrempf Frieder
- [U-Boot] [PATCH v3 13/28] mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected
Schrempf Frieder
- [U-Boot] [PATCH 0/6] Add support for MIPS Creator CI20
Andreas Färber
- [U-Boot] [PATCH 0/6] Add support for MIPS Creator CI20
Andreas Färber
- [U-Boot] Re : Re: [PATCH] exynos: imply SYS_THUMB_BUILD
Guillaume GARDET
- [U-Boot] Re : Re: [PATCH] exynos: imply SYS_THUMB_BUILD
Guillaume GARDET
- [U-Boot] Re : Re: please pull u-boot-samsung master
Guillaume GARDET
- [U-Boot] [PATCH] ARM: zynq: Adding ps7_init_gpl.c for Z-turn board
Alexandre GRIVEAUX
- [U-Boot] [PATCH] board: rockchip: rk3399: add Rockpro64 board support
Akash Gajjar
- [U-Boot] [PATCH v1] tools: mtk_image: replace strncpy(d, s, sizeof(d)) with snprintf()
Weijie Gao
- [U-Boot] [PATCH 00/11] Add ethernet driver for MediaTek SoCs
Weijie Gao
- [U-Boot] [PATCH 01/11] mt7623: fix a typo in include/configs/mt7623.h
Weijie Gao
- [U-Boot] [PATCH 02/11] mt7629: use linux kernel compatible SMP initialization
Weijie Gao
- [U-Boot] [PATCH 03/11] reset: MedaiTek: add reset controller driver for MediaTek SoCs
Weijie Gao
- [U-Boot] [PATCH 04/11] clk: MediaTek: bind ethsys reset controller
Weijie Gao
- [U-Boot] [PATCH 05/11] ethernet: MediaTek: add ethernet driver for MediaTek ARM-based SoCs
Weijie Gao
- [U-Boot] [PATCH 06/11] arm: dts: add ethernet related node for MT7623 SoC
Weijie Gao
- [U-Boot] [PATCH 07/11] arm: dts: add ethernet related node for MT7629 SoC
Weijie Gao
- [U-Boot] [PATCH 08/11] arm: MediaTek: add ethernet support for MT7623 boards
Weijie Gao
- [U-Boot] [PATCH 09/11] arm: MediaTek: add ethernet support for MT7629 boards
Weijie Gao
- [U-Boot] [PATCH 10/11] MAINTAINERS: ARM MEDIATEK: update file entries
Weijie Gao
- [U-Boot] [PATCH 11/11] configs: MediaTek: use OF_SEPARATE instead of OF_EMBED
Weijie Gao
- [U-Boot] [U-Boot, v3, 4/4] rockchip: rk3399: Add Ficus EE board support
Ezequiel Garcia
- [U-Boot] [U-Boot, v3, 4/4] rockchip: rk3399: Add Ficus EE board support
Ezequiel Garcia
- [U-Boot] [PATCH 0/6] Add support for MIPS Creator CI20
Ezequiel Garcia
- [U-Boot] [PATCH 1/6] misc: Add JZ47xx efuse driver
Ezequiel Garcia
- [U-Boot] [PATCH 2/6] gpio: Add JZ47xx GPIO driver
Ezequiel Garcia
- [U-Boot] [PATCH 3/6] mmc: Add JZ47xx SD/MMC controller driver
Ezequiel Garcia
- [U-Boot] [PATCH 4/6] mips: Add SPL header
Ezequiel Garcia
- [U-Boot] [PATCH 5/6] mips: jz47xx: Add JZ4780 SoC support
Ezequiel Garcia
- [U-Boot] [PATCH 6/6] mips: jz47xx: Add Creator CI20 platform
Ezequiel Garcia
- [U-Boot] [PATCH 0/6] Add support for MIPS Creator CI20
Ezequiel Garcia
- [U-Boot] [PATCH 1/6] misc: Add JZ47xx efuse driver
Ezequiel Garcia
- [U-Boot] [PATCH 0/6] Add support for MIPS Creator CI20
Ezequiel Garcia
- [U-Boot] [PATCH 0/6] Add support for MIPS Creator CI20
Ezequiel Garcia
- [U-Boot] [PATCH v2 0/6] Add support for MIPS Creator CI20
Ezequiel Garcia
- [U-Boot] [PATCH v2 1/6] misc: Add JZ47xx efuse driver
Ezequiel Garcia
- [U-Boot] [PATCH v2 2/6] gpio: Add JZ47xx GPIO driver
Ezequiel Garcia
- [U-Boot] [PATCH v2 3/6] mmc: Add JZ47xx SD/MMC controller driver
Ezequiel Garcia
- [U-Boot] [PATCH v2 4/6] mips: Add SPL header
Ezequiel Garcia
- [U-Boot] [PATCH v2 5/6] mips: jz47xx: Add JZ4780 SoC support
Ezequiel Garcia
- [U-Boot] [PATCH v2 6/6] mips: jz47xx: Add Creator CI20 platform
Ezequiel Garcia
- [U-Boot] [PATCH v2 0/6] Add support for MIPS Creator CI20
Ezequiel Garcia
- [U-Boot] [PATCH v3 0/5] Add support for MIPS Creator CI20
Ezequiel Garcia
- [U-Boot] [PATCH v3 1/5] misc: Add JZ47xx efuse driver
Ezequiel Garcia
- [U-Boot] [PATCH v3 2/5] mmc: Add JZ47xx SD/MMC controller driver
Ezequiel Garcia
- [U-Boot] [PATCH v3 3/5] mips: Add SPL header
Ezequiel Garcia
- [U-Boot] [PATCH v3 4/5] mips: jz47xx: Add JZ4780 SoC support
Ezequiel Garcia
- [U-Boot] [PATCH v3 5/5] mips: jz47xx: Add Creator CI20 platform
Ezequiel Garcia
- [U-Boot] [PATCH v3 0/5] Add support for MIPS Creator CI20
Ezequiel Garcia
- [U-Boot] [PATCH] omap3: beagle: Enable DM_MMC and BLK for u-boot only, not SPL
Guillaume Gardet
- [U-Boot] Re : Re: [PATCH] exynos: imply SYS_THUMB_BUILD
Guillaume Gardet
- [U-Boot] [PATCH] fsl-ls2088ardb: dts: enabling SATA node
Pankit Garg
- [U-Boot] [PATCH] fsl-ls2088ardb: dts: enabling SATA node
Pankit Garg
- [U-Boot] [PATCH 0/4] efi_loader: non-volatile variables support
Sumit Garg
- [U-Boot] [PATCH 0/4] efi_loader: non-volatile variables support
Sumit Garg
- [U-Boot] [PATCH v2] qemu-arm: Enable VirtIO distro target
Sumit Garg
- [U-Boot] [PATCH] qemu-arm: Add persistent environment support
Sumit Garg
- [U-Boot] [PATCH] qemu-arm: Add persistent environment support
Sumit Garg
- [U-Boot] [PATCH] qemu-arm: Add persistent environment support
Sumit Garg
- [U-Boot] [PATCH 0/1] Extend malloc() pool for Zynq devices
Anton Gerasimov
- [U-Boot] [PATCH 1/1] zynq: Kconfig: extend the bootstrap malloc() pool
Anton Gerasimov
- [U-Boot] [PATCH 1/1] zynq: Kconfig: extend the bootstrap malloc() pool
Anton Gerasimov
- [U-Boot] [PATCHv2] zynq: Kconfig: extend the bootstrap malloc() pool
Anton Gerasimov
- [U-Boot] [PATCH 1/1] net: mvneta: Add GPIO configuration support
Dennis Gilmore
- [U-Boot] [PATCH v3 0/6] Update support for Helios4 board
Dennis Gilmore
- [U-Boot] [PATCH 00/30] dm: sound: Convert to driver model
Simon Glass
- [U-Boot] [PATCH 01/30] sandbox: Increase the pre-relocation memory
Simon Glass
- [U-Boot] [PATCH 02/30] snow: Expand U-Boot size
Simon Glass
- [U-Boot] [PATCH 03/30] dm: sound: samsung: Make local function static
Simon Glass
- [U-Boot] [PATCH 04/30] dm: sound: Rename en_sound_codec to sound_codec
Simon Glass
- [U-Boot] [PATCH 05/30] dm: sound: Drop unused pre-device-tree code
Simon Glass
- [U-Boot] [PATCH 06/30] dm: sound: samsung: Rename i2stx_info to samsung_i2s_priv
Simon Glass
- [U-Boot] [PATCH 07/30] dm: sound: Drop codec_type
Simon Glass
- [U-Boot] [PATCH 08/30] dm: sound: wm8994: Pass private data to internal functions
Simon Glass
- [U-Boot] [PATCH 09/30] dm: sound: max98095: Pass private data to internal functions
Simon Glass
- [U-Boot] [PATCH 10/30] dm: sound: wm8994: Create a new common init function
Simon Glass
- [U-Boot] [PATCH 11/30] dm: sound: wm899c: Split out interface setup code
Simon Glass
- [U-Boot] [PATCH 12/30] dm: sound: max98095: Split out interface setup code
Simon Glass
- [U-Boot] [PATCH 13/30] dm: sound: wm8994: Drop global i2c-address variable
Simon Glass
- [U-Boot] [PATCH 14/30] dm: sound: max98095: Drop global i2c-address variable
Simon Glass
- [U-Boot] [PATCH 15/30] dm: sound: wm8994: Drop g_codec_info and g_wm8994_info
Simon Glass
- [U-Boot] [PATCH 16/30] dm: sound: max98095: Drop g_codec_info and g_max98095_info
Simon Glass
- [U-Boot] [PATCH 17/30] dm: sound: wm8994: Drop wm8994_i2c_init()
Simon Glass
- [U-Boot] [PATCH 18/30] dm: sound: Fix up header ordering
Simon Glass
- [U-Boot] [PATCH 19/30] dm: sound: exynos: Correct codec bus address
Simon Glass
- [U-Boot] [PATCH 20/30] dm: sound: Create an option to use driver model for sound
Simon Glass
- [U-Boot] [PATCH 21/30] dm: sound: Rename samsung_i2s_priv to i2s_uc_priv
Simon Glass
- [U-Boot] [PATCH 22/30] dm: sound: Create a uclass for audio codecs
Simon Glass
- [U-Boot] [PATCH 23/30] dm: sound: Create a uclass for i2s
Simon Glass
- [U-Boot] [PATCH 24/30] dm: sound: Create a uclass for sound
Simon Glass
- [U-Boot] [PATCH 25/30] dm: core: Add a function to read into a unsigned int
Simon Glass
- [U-Boot] [PATCH 26/30] dm: sound: Start i2c IDs from 0
Simon Glass
- [U-Boot] [PATCH 27/30] dm: sound: Add conversion to driver model
Simon Glass
- [U-Boot] [PATCH 28/30] dm: exynos: sound: Convert to use driver model
Simon Glass
- [U-Boot] [PATCH 29/30] dm: exynos: Drop CONFIG_DM_I2C_COMPAT
Simon Glass
- [U-Boot] [PATCH 30/30] dm: sound: Complete migration to driver model
Simon Glass
- [U-Boot] [PATCH v3 4/5] mmc: tegra: select BOUNCE_BUFFER unconditionally
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH v3 0/8] Fix CVE-2018-18440 and CVE-2018-18439
Simon Glass
- [U-Boot] [RESEND][PATCH] power: regulator: denied disable on always-on regulator
Simon Glass
- [U-Boot] [BUG] sandbox_defconfig cannot be run anymore after 4a5b5e1a466d76f "sandbox: Update some drivers to work in SPL/TPL"
Simon Glass
- [U-Boot] [PATCH v2 1/1] dm: core: add functions to get/remap I/O addresses by name
Simon Glass
- [U-Boot] [PATCH v3 0/8] Fix CVE-2018-18440 and CVE-2018-18439
Simon Glass
- [U-Boot] [PATCH v3 1/1] dm: core: add functions to get/remap I/O addresses by name
Simon Glass
- [U-Boot] [PATCH 1/3] buildman: Drop comment about Ctrl-C problem
Simon Glass
- [U-Boot] [PATCH 2/3] buildman: Add support for building with clang
Simon Glass
- [U-Boot] [PATCH 3/3] travis: Use buildman for building with clang
Simon Glass
- [U-Boot] [PATCH] test: hexdump: fix misplaced return
Simon Glass
- [U-Boot] [PATCH v3 1/7] dm: serial: Add ->getconfig() callback
Simon Glass
- [U-Boot] [PATCH v3 2/7] dm: serial: Introduce ->getinfo() callback
Simon Glass
- [U-Boot] [PATCH v3 3/7] serial: ns16550: Group reg_* members of ns16550_platdata
Simon Glass
- [U-Boot] [PATCH v3 4/7] serial: ns16550: Read reg-io-width from device tree
Simon Glass
- [U-Boot] [PATCH v3 5/7] serial: ns16550: Provide ->getinfo() implementation
Simon Glass
- [U-Boot] [PATCH v3 7/7] x86: acpi: Generate SPCR table
Simon Glass
- [U-Boot] [PATCH v3 0/8] Fix CVE-2018-18440 and CVE-2018-18439
Simon Glass
- [U-Boot] [PATCH 66/93] arm: Remove ot1200 board
Simon Glass
- [U-Boot] [PATCH 66/93] arm: Remove ot1200 board
Simon Glass
- [U-Boot] [PATCH] blk: Rework guard around part_init call
Simon Glass
- [U-Boot] [PATCH] fdt: Add warning about CONFIG_OF_EMBED
Simon Glass
- [U-Boot] [PATCH v2 1/2] x86: Wrap calls to 8259 with CONFIG_I8259_PIC
Simon Glass
- [U-Boot] [PATCH v2 2/2] x86: kconfig: Allow board defconfig file to disable 8259 and APIC
Simon Glass
- [U-Boot] [PATCH v3 0/8] Fix CVE-2018-18440 and CVE-2018-18439
Simon Glass
- [U-Boot] [PATCH 66/93] arm: Remove ot1200 board
Simon Glass
- [U-Boot] [PATCH] fdt: Add warning about CONFIG_OF_EMBED
Simon Glass
- [U-Boot] [PATCH v3 1/7] dm: serial: Add ->getconfig() callback
Simon Glass
- [U-Boot] [PATCH 0/5] dm: serial: Fix up some serial API errors
Simon Glass
- [U-Boot] [PATCH 1/5] serial: Move new functions to serial.h
Simon Glass
- [U-Boot] [PATCH 2/5] dm: serial: Adjust serial_getconfig() to use proper API
Simon Glass
- [U-Boot] [PATCH 3/5] dm: serial: Adjust serial_setconfig() to use proper API
Simon Glass
- [U-Boot] [PATCH 4/5] dm: serial: Adjust serial_getinfo() to use proper API
Simon Glass
- [U-Boot] [PATCH 5/5] dm: serial: Tidy up header file comments
Simon Glass
- [U-Boot] [PATCH 0/5] dm: serial: Fix up some serial API errors
Simon Glass
- [U-Boot] [RESEND][PATCH] power: regulator: denied disable on always-on regulator
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [RFC PATCH] spl/tpl: change banner into upper case
Simon Glass
- [U-Boot] [PATCH] common: fdt_support: print hexadecimal numbers in debug
Simon Glass
- [U-Boot] [PATCH] serial: serial_stm32: Add reset support
Simon Glass
- [U-Boot] Question regarding early pinctrl and driver model in u-boot
Simon Glass
- [U-Boot] [RESENT PATCH 1/2] rockchip: rk3128: use ROCKCHIP_BOOT_MODE_REG to update reboot flag
Simon Glass
- [U-Boot] [PATCH 1/7] cmd: part: Add 'number' sub-command
Simon Glass
- [U-Boot] [PATCH 2/7] disk: part: Extend API to get partition info
Simon Glass
- [U-Boot] [PATCH 3/7] common: Implement A/B metadata
Simon Glass
- [U-Boot] [PATCH 5/7] test/py: Add base test case for A/B updates
Simon Glass
- [U-Boot] [PATCH 6/7] doc: android: Add simple guide for A/B updates
Simon Glass
- [U-Boot] [PATCH] sf: prevent clean_bar overwriting error codes
Simon Glass
- [U-Boot] [PATCH] dm: Tidy up 'dm tree' output when there are many devices
Simon Glass
- [U-Boot] [RESENT PATCH 1/2] rockchip: rk3128: use ROCKCHIP_BOOT_MODE_REG to update reboot flag
Simon Glass
- [U-Boot] [RESENT PATCH 1/2] rockchip: rk3128: use ROCKCHIP_BOOT_MODE_REG to update reboot flag
Simon Glass
- [U-Boot] [PATCH] test: dm: regmap: Fix the long test delay
Simon Glass
- [U-Boot] [PATCH 1/4] snow: Expand U-Boot size
Simon Glass
- [U-Boot] [PATCH 2/4] Convert CONFIG_BOARD_TYPES to Kconfig
Simon Glass
- [U-Boot] [PATCH 3/4] exynos: Drop duplicate 'model' line
Simon Glass
- [U-Boot] [PATCH 4/4] exynos: Convert to use CONFIG_BLK
Simon Glass
- [U-Boot] [PATCH] buildman: Deal nicely with invalid build-status file
Simon Glass
- [U-Boot] [PATCH v2 00/22] dm: sound: Convert to driver model
Simon Glass
- [U-Boot] [PATCH v2 01/22] dm: sound: exynos: Correct codec bus addresses
Simon Glass
- [U-Boot] [PATCH v2 02/22] dm: sound: Create an option to use driver model for sound
Simon Glass
- [U-Boot] [PATCH v2 03/22] dm: sound: Rename samsung_i2s_priv to i2s_uc_priv
Simon Glass
- [U-Boot] [PATCH v2 04/22] dm: sound: Create a uclass for audio codecs
Simon Glass
- [U-Boot] [PATCH v2 05/22] dm: sound: Create a uclass for i2s
Simon Glass
- [U-Boot] [PATCH v2 06/22] dm: sandbox: Update sound to use two buffers
Simon Glass
- [U-Boot] [PATCH v2 07/22] dm: sound: Create a uclass for sound
Simon Glass
- [U-Boot] [PATCH v2 08/22] dm: core: Add a function to read into a unsigned int
Simon Glass
- [U-Boot] [PATCH v2 09/22] dm: sound: Start i2c IDs from 0
Simon Glass
- [U-Boot] [PATCH v2 10/22] dm: sound: Add conversion to driver model
Simon Glass
- [U-Boot] [PATCH v2 11/22] exynos: Add proid_is_exynos542x() for common 542x
Simon Glass
- [U-Boot] [PATCH v2 12/22] exynos: Add support for exynos5420 i2s pinmux
Simon Glass
- [U-Boot] [PATCH v2 13/22] dm: sound: Move common code out of maxim98095
Simon Glass
- [U-Boot] [PATCH v2 14/22] dm: sound: exynos: Add support for max98090
Simon Glass
- [U-Boot] [PATCH v2 15/22] dm: exynos: sound: Convert to use driver model
Simon Glass
- [U-Boot] [PATCH v2 16/22] dm: sandbox: sound: Convert to use driver model
Simon Glass
- [U-Boot] [PATCH v2 17/22] dm: exynos: Drop CONFIG_DM_I2C_COMPAT
Simon Glass
- [U-Boot] [PATCH v2 18/22] dm: sound: Complete migration to driver model
Simon Glass
- [U-Boot] [PATCH v2 19/22] dm: sound: Fix license headers
Simon Glass
- [U-Boot] [PATCH v2 20/22] dm: sound: max98095: Tidy up error codes
Simon Glass
- [U-Boot] [PATCH v2 21/22] dm: sandbox: Allow selection of sample rate and channels
Simon Glass
- [U-Boot] [PATCH v2 22/22] dm: sound: Use the correct number of channels for sound
Simon Glass
- [U-Boot] [PATCH 20/21] Add inttypes.h
Simon Glass
- [U-Boot] [PATCH 6/7] doc: android: Add simple guide for A/B updates
Simon Glass
- [U-Boot] [PATCH v2 32/32] dm: MIGRATION: spi: Update SPI driver status
Simon Glass
- [U-Boot] [PATCH] blk: Rework guard around part_init call
Simon Glass
- [U-Boot] [PATCH V2 2/2] spl: introduce function prototypes
Simon Glass
- [U-Boot] [RFC] fit: include uncompression into fit_image_load
Simon Glass
- [U-Boot] [PATCH v4 06/10] dm: usb: create a new UCLASS ID for USB gadget devices
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH v4 1/6] common: command: Fix command auto-completion
Simon Glass
- [U-Boot] [PATCH] sandbox: add memset_io(..), memcpy_fromio(..) and memcpy_toio(..)
Simon Glass
- [U-Boot] Question regarding early pinctrl and driver model in u-boot
Simon Glass
- [U-Boot] [RESEND PATCH v3 16/19] lib: fdtdec: Add function re-setup the fdt more effeciently
Simon Glass
- [U-Boot] [RESEND PATCH v3 00/19] DM_I2C_COMPAT removal for all ti platforms
Simon Glass
- [U-Boot] [PATCH v5 1/9] test: add test for lib/lmb.c
Simon Glass
- [U-Boot] [PATCH v5 4/9] fdt: parse "reserved-memory" for memory reservation
Simon Glass
- [U-Boot] [PATCH v5 6/9] fs: prevent overwriting reserved memory
Simon Glass
- [U-Boot] [PATCH v5 7/9] bootm: use new common function lmb_init_and_reserve
Simon Glass
- [U-Boot] [PATCH] test: hexdump: fix misplaced return
Simon Glass
- [U-Boot] [PATCH v2 1/2] bootcount: add uclass for bootcount
Simon Glass
- [U-Boot] [PATCH] misc: fs_loader: Switching private data allocation to DM auto allocation
Simon Glass
- [U-Boot] [PATCH v2 2/8] fdt: parse "reserved-memory" for memory reservation
Simon Glass
- [U-Boot] [PATCH v2] spl: implement CRC check on U-Boot uImage
Simon Glass
- [U-Boot] Regression: dm: i2c: Make i2c_get_chip_for_busnum() fail if the chip is not detected
Simon Glass
- [U-Boot] [PATCH v4 1/6] common: command: Fix command auto-completion
Simon Glass
- [U-Boot] [PATCH] test: dm: regmap: Fix the long test delay
Simon Glass
- [U-Boot] [U-Boot, PATCHv3, 1/4] dm: MIGRATION: Add migration plan for DM_MMC
Simon Glass
- [U-Boot] [PATCH v2 1/2] bootcount: add uclass for bootcount
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH v2 1/2] bootcount: add uclass for bootcount
Simon Glass
- [U-Boot] buildman and "echo" output?
Simon Glass
- [U-Boot] [PATCH 1/2] dm: pci: MIGRATION: Add migration plan for PCI
Simon Glass
- [U-Boot] [PATCH 2/2] dm: video: lcd: MIGRATION: Add migration plan for video
Simon Glass
- [U-Boot] [PATCH v2 00/11] samsung: Tidy up sound, DM_MMC drop dead code
Simon Glass
- [U-Boot] [PATCH v2 01/11] odroid: Resync defconfigs
Simon Glass
- [U-Boot] [PATCH v2 02/11] Convert CONFIG_BOARD_TYPES to Kconfig
Simon Glass
- [U-Boot] [PATCH v2 03/11] exynos: Drop duplicate 'model' line
Simon Glass
- [U-Boot] [PATCH v2 04/11] exynos: Convert to use CONFIG_BLK
Simon Glass
- [U-Boot] [PATCH v2 05/11] sound: Add a driver for max98088
Simon Glass
- [U-Boot] [PATCH v2 06/11] spring: Update sound to use max98088 codec
Simon Glass
- [U-Boot] [PATCH v2 07/11] spring: Update flashmap details
Simon Glass
- [U-Boot] [PATCH v2 08/11] samsung: Drop board_enable_audio_codec()
Simon Glass
- [U-Boot] [PATCH v2 09/11] samsung: mmc: Drop old MMC init code
Simon Glass
- [U-Boot] [PATCH v2 10/11] fdt: samsung: Drop unused fdt_compat_id values
Simon Glass
- [U-Boot] [PATCH v2 11/11] fdt: tegra: Drop COMPAT_AMS_AS3722
Simon Glass
- [U-Boot] [PATCH] sandbox: Correct SDL build flags
Simon Glass
- [U-Boot] [PATCH] Add an empty stdint.h file
Simon Glass
- [U-Boot] u-boot-rockchip: firefly-rk3288 hangs on: Loading Environment from MMC
Simon Glass
- [U-Boot] SPL Platdata howto?
Simon Glass
- [U-Boot] SPL Platdata howto?
Simon Glass
- [U-Boot] [PATCH v1] scripts/check-config.sh: Add usage()
Simon Glass
- [U-Boot] [PATCH v3 4/8] dm: pinctrl: Add pinctrl_decode_pin_config_dm().
Simon Glass
- [U-Boot] [PATCH v2 2/6] power: regulator: Allow PWM regulator to be omitted from SPL.
Simon Glass
- [U-Boot] [PATCH v2 6/6] rockchip: rk3399-puma: Set VDD_LOG to 950 mV.
Simon Glass
- [U-Boot] [PATCH v3 5/8] rockchip: rk3399: Add improved pinctrl driver.
Simon Glass
- [U-Boot] [U-Boot, PATCHv3, 1/4] dm: MIGRATION: Add migration plan for DM_MMC
Simon Glass
- [U-Boot] [PATCH 1/1] cmd: add exception command
Simon Glass
- [U-Boot] [PATCH] Add support for initializing MMC
Simon Glass
- [U-Boot] [PATCH v2 00/11] samsung: Tidy up sound, DM_MMC drop dead code
Simon Glass
- [U-Boot] [PATCH 1/1] cmd: add exception command
Simon Glass
- [U-Boot] [PATCH 1/1] doc: README.commands: sub-commands
Simon Glass
- [U-Boot] [PATCH 1/1] distro_bootcmd: add NVME support
Simon Glass
- [U-Boot] [PATCH v3 4/8] dm: pinctrl: Add pinctrl_decode_pin_config_dm().
Simon Glass
- [U-Boot] SPL Platdata howto?
Simon Glass
- [U-Boot] [PATCH 1/3] include: configs: Add gunzip size for HiKey board
Simon Glass
- [U-Boot] [PATCH 2/3] mmc: Convert HI6220 MMC driver to driver model
Simon Glass
- [U-Boot] [PATCH 3/3] arm: dts: Add MMC nodes for HiKey board
Simon Glass
- [U-Boot] [PATCH 1/2] lib: fdtdec: fdtdec_get_addr_size_fixed remove checks
Simon Glass
- [U-Boot] [PATCH 2/2] lib: fdtdec: fixup fdtdec_get_addr_size
Simon Glass
- [U-Boot] [PATCH] Add support for initializing MMC
Simon Glass
- [U-Boot] [PATCH v2 1/1] avb: add support for named persistent values
Simon Glass
- [U-Boot] [PATCH] test: Use single quote consistently
Simon Glass
- [U-Boot] [PATCH v2 1/1] avb: add support for named persistent values
Simon Glass
- [U-Boot] [PATCH 00/11] sound: Add sound support for Nyan
Simon Glass
- [U-Boot] [PATCH 01/11] misc: Allow child devices
Simon Glass
- [U-Boot] [PATCH 02/11] sound: samsung: Fix 'regiter' typo
Simon Glass
- [U-Boot] [PATCH 03/11] sound: i2s: Tidy up a few comments
Simon Glass
- [U-Boot] [PATCH 04/11] sound: Allow audio codecs to be used by other SoCs
Simon Glass
- [U-Boot] [PATCH 05/11] tegra: Correct tegra124 clock name
Simon Glass
- [U-Boot] [PATCH 06/11] tegra: Add a delay in clock_start_periph_pll()
Simon Glass
- [U-Boot] [PATCH 07/11] tegra: sound: Add an audio hub driver
Simon Glass
- [U-Boot] [PATCH 08/11] tegra: sound: Add an I2S driver
Simon Glass
- [U-Boot] [PATCH 09/11] sound: tegra: Add a sound driver
Simon Glass
- [U-Boot] [PATCH 10/11] tegra: nyan-big: Enable sound
Simon Glass
- [U-Boot] [PATCH 11/11] tegra: nyan: Add a README
Simon Glass
- [U-Boot] [PATCH 1/3] video: Add information about using TrueType fonts
Simon Glass
- [U-Boot] [PATCH 2/3] video: Add a default TrueType font
Simon Glass
- [U-Boot] [PATCH 3/3] video: rockchip: Use TrueType fonts with jerry
Simon Glass
- [U-Boot] [PATCH] power: regulator: Return success on attempt to disable an always-on regulator
Simon Glass
- [U-Boot] [PATCH] fdt: Add warning about CONFIG_OF_EMBED
Simon Glass
- [U-Boot] [PATCH 0/4] rockchip: sound: Add support for sound on chromebook_jerry
Simon Glass
- [U-Boot] [PATCH 1/4] rockchip: rk3288: Add i2s pinctrl and clock support
Simon Glass
- [U-Boot] [PATCH 2/4] rockchip: Add an I2S driver
Simon Glass
- [U-Boot] [PATCH 3/4] rockchip: Add a sound driver
Simon Glass
- [U-Boot] [PATCH 4/4] sound: rockchip: Add sound support for jerry
Simon Glass
- [U-Boot] [PATCH v2 1/2] dm: pci: MIGRATION: Add migration plan for PCI
Simon Glass
- [U-Boot] [PATCH v2 2/2] dm: video: lcd: MIGRATION: Add migration plan for video
Simon Glass
- [U-Boot] [PATCH v2 2/2] dm: video: lcd: MIGRATION: Add migration plan for video
Simon Glass
- [U-Boot] [PATCH v3 1/2] dm: pci: MIGRATION: Add migration plan for PCI
Simon Glass
- [U-Boot] [PATCH v3 2/2] dm: video: lcd: MIGRATION: Add migration plan for video
Simon Glass
- [U-Boot] re-use dm data for pre-relocate and post-relocate
Simon Glass
- [U-Boot] [PATCH v2 0/5] dm: serial: Fix up some serial API errors
Simon Glass
- [U-Boot] [PATCH v2 1/5] serial: Move new functions to serial.h
Simon Glass
- [U-Boot] [PATCH v2 2/5] dm: serial: Adjust serial_getconfig() to use proper API
Simon Glass
- [U-Boot] [PATCH v2 3/5] dm: serial: Adjust serial_setconfig() to use proper API
Simon Glass
- [U-Boot] [PATCH v2 4/5] dm: serial: Adjust serial_getinfo() to use proper API
Simon Glass
- [U-Boot] [PATCH v2 5/5] dm: serial: Tidy up header file comments
Simon Glass
- [U-Boot] [PATCH] dm: video: fix test failures with enabled default TrueType font
Simon Glass
- [U-Boot] [PATCH 1/2] rockchip: chromebook_minnie: Enable sound
Simon Glass
- [U-Boot] [PATCH 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now
Simon Glass
- [U-Boot] [PATCH v2] rockchip: sdram-common: fix wrong size for 4GB in 32bit SoC
Simon Glass
- [U-Boot] [PATCH] power: regulator: Return success on attempt to disable an always-on regulator
Simon Glass
- [U-Boot] [PATCH 0/4] rockchip: sound: Add support for sound on chromebook_jerry
Simon Glass
- [U-Boot] [PATCH v3 4/8] dm: pinctrl: Add pinctrl_decode_pin_config_dm().
Simon Glass
- [U-Boot] [PATCH v2 1/3] include: configs: Add gunzip size for HiKey board
Simon Glass
- [U-Boot] [PATCH 1/1] cmd: add exception command
Simon Glass
- [U-Boot] [PATCH 2/3] tools: mkimage: Add Allwinner eGON support
Simon Glass
- [U-Boot] [PATCH 1/3] tools: mkimage: Add missing names for imx8mimage and loadables
Simon Glass
- [U-Boot] [PATCH 3/3] sunxi: Use mkimage -T sunxi_egon for SPL boot image generation
Simon Glass
- [U-Boot] [PATCH 1/4] fs: cbfs: remove wrong header validation
Simon Glass
- [U-Boot] [PATCH 2/4] fs: cbfs: Fix out of bound access during CBFS walking through
Simon Glass
- [U-Boot] [PATCH 3/4] fs: cbfs: Make all CBFS_TYPE_xxx macros consistent
Simon Glass
- [U-Boot] [PATCH 4/4] fs: cbfs: Add missing standard CBFS component types
Simon Glass
- [U-Boot] [PATCH] fdt: Add warning about CONFIG_OF_EMBED
Simon Glass
- [U-Boot] [PATCH] sandbox: add memset_io(..), memcpy_fromio(..) and memcpy_toio(..)
Christian Gmeiner
- [U-Boot] [PATCH] net: explicitly assign errno to return code in case of network failure
Christian Gmeiner
- [U-Boot] [PATCH] fs: cbfs: remove wrong header validation
Christian Gmeiner
- [U-Boot] [PATCH] fs: cbfs: remove wrong header validation
Christian Gmeiner
- [U-Boot] Port old board to Kconfig
Tim Godfrey
- [U-Boot] [PATCH v4 0/7] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [PATCH] mtd: sf_probe: add jedec,spi-nor compatible
Simon Goldschmidt
- [U-Boot] [PATCH v3 0/5] Migrate BOUNCE_BUFFER
Simon Goldschmidt
- [U-Boot] [PATCH v4 0/7] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] list files on tftp / large kernel-image
Simon Goldschmidt
- [U-Boot] [PATCH v4 0/7] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] Please pull u-boot-dm
Simon Goldschmidt
- [U-Boot] [PATCH v3 0/8] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] ensure active menuitem is inside menu
Simon Goldschmidt
- [U-Boot] ensure active menuitem is inside menu
Simon Goldschmidt
- [U-Boot] [PATCH v3 0/8] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [PATCH] Revert "serial: ns16550: fix debug uart putc called before init"
Simon Goldschmidt
- [U-Boot] [PATCH v4 0/7] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [PATCH v3 0/8] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [PATCH] test: hexdump: fix misplaced return
Simon Goldschmidt
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [RFC PATCH v2 08/11] mtd: spi: Add lightweight SPI flash stack for SPL
Simon Goldschmidt
- [U-Boot] [RFC PATCH v2 06/11] mtd spi: Switch to new SPI NOR framework
Simon Goldschmidt
- [U-Boot] [PATCH v3 0/8] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [PATCH 66/93] arm: Remove ot1200 board
Simon Goldschmidt
- [U-Boot] [PATCH 66/93] arm: Remove ot1200 board
Simon Goldschmidt
- [U-Boot] [PATCH] fdt: Add warning about CONFIG_OF_EMBED
Simon Goldschmidt
- [U-Boot] [PATCH v4 0/7] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [PATCH] fdt: Add warning about CONFIG_OF_EMBED
Simon Goldschmidt
- [U-Boot] [PATCH 66/93] arm: Remove ot1200 board
Simon Goldschmidt
- [U-Boot] [RFC PATCH v2 05/11] mtd: spi: Port SPI NOR framework from Linux
Simon Goldschmidt
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [PATCH v2 4/5] fdtdec: switch GENERIC_SPI_FLASH to jedec, spi-nor
Simon Goldschmidt
- [U-Boot] [PATCH v2 0/5] spi-flash: switch to "jedec, spi-nor" binding
Simon Goldschmidt
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [PATCH v3 13/28] mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected
Simon Goldschmidt
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [PATCH v5 0/9] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [PATCH v5 1/9] test: add test for lib/lmb.c
Simon Goldschmidt
- [U-Boot] [PATCH v5 2/9] lmb: fix allocation at end of address range
Simon Goldschmidt
- [U-Boot] [PATCH v5 3/9] lib: lmb: reserving overlapping regions should fail
Simon Goldschmidt
- [U-Boot] [PATCH v5 4/9] fdt: parse "reserved-memory" for memory reservation
Simon Goldschmidt
- [U-Boot] [PATCH v5 5/9] lib: lmb: extend lmb for checks at load time
Simon Goldschmidt
- [U-Boot] [PATCH v5 6/9] fs: prevent overwriting reserved memory
Simon Goldschmidt
- [U-Boot] [PATCH v5 7/9] bootm: use new common function lmb_init_and_reserve
Simon Goldschmidt
- [U-Boot] [PATCH v5 8/9] lmb: remove unused extern declaration
Simon Goldschmidt
- [U-Boot] [PATCH v5 9/9] tftp: prevent overwriting reserved memory
Simon Goldschmidt
- [U-Boot] [PATCH 1/2] net: designware: fix tx packet length
Simon Goldschmidt
- [U-Boot] [PATCH] net: fix env flags for eth10addr and above
Simon Goldschmidt
- [U-Boot] [PATCH] net: remove duplicate definition of ETHADDR_WILDCARD
Simon Goldschmidt
- [U-Boot] [PATCH] test: hexdump: fix misplaced return
Simon Goldschmidt
- [U-Boot] [PATCH 1/7] spi: update management of default speed and mode
Simon Goldschmidt
- [U-Boot] [PATCH 2/7] spi: add comment for spi_flash_probe_bus_cs function
Simon Goldschmidt
- [U-Boot] [PATCH 7/7] spi: remove define for SPI default SPEED and MODE
Simon Goldschmidt
- [U-Boot] [PATCH 6/7] env: Read default speed and mode values from DT
Simon Goldschmidt
- [U-Boot] [PATCH 0/7] Remove defines for SPI default speed and mode
Simon Goldschmidt
- [U-Boot] [PATCH 1/7] spi: update management of default speed and mode
Simon Goldschmidt
- [U-Boot] [BUG] ut overlay fails with v2018.03 and later on qemu-arm64_defconfig
Simon Goldschmidt
- [U-Boot] [PATCH 0/7] Remove defines for SPI default speed and mode
Simon Goldschmidt
- [U-Boot] [PATCH v5 0/9] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [PATCH v5 0/9] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [PATCH 0/7] Remove defines for SPI default speed and mode
Simon Goldschmidt
- [U-Boot] [PATCH 10/16] configs: Get rid of SPI_FLASH_BAR
Simon Goldschmidt
- [U-Boot] [U-Boot, PATCHv3, 1/4] dm: MIGRATION: Add migration plan for DM_MMC
Simon Goldschmidt
- [U-Boot] [U-Boot, PATCHv3, 1/4] dm: MIGRATION: Add migration plan for DM_MMC
Simon Goldschmidt
- [U-Boot] [PATCH] image: fix compiling without CMD_FDT
Simon Goldschmidt
- [U-Boot] [PATCH] net: remove duplicate definition of ETHADDR_WILDCARD
Simon Goldschmidt
- [U-Boot] [PATCH] net: fix env flags for eth10addr and above
Simon Goldschmidt
- [U-Boot] [PATCH v5 0/9] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [PATCH] net: remove duplicate definition of ETHADDR_WILDCARD
Simon Goldschmidt
- [U-Boot] [PATCH 00/16] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [PATCH 00/16] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [PATCH v6 0/9] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [PATCH v6 1/9] test: add test for lib/lmb.c
Simon Goldschmidt
- [U-Boot] [PATCH v6 2/9] lmb: fix allocation at end of address range
Simon Goldschmidt
- [U-Boot] [PATCH v6 3/9] lib: lmb: reserving overlapping regions should fail
Simon Goldschmidt
- [U-Boot] [PATCH v6 4/9] fdt: parse "reserved-memory" for memory reservation
Simon Goldschmidt
- [U-Boot] [PATCH v6 5/9] lib: lmb: extend lmb for checks at load time
Simon Goldschmidt
- [U-Boot] [PATCH v6 6/9] fs: prevent overwriting reserved memory
Simon Goldschmidt
- [U-Boot] [PATCH v6 7/9] bootm: use new common function lmb_init_and_reserve
Simon Goldschmidt
- [U-Boot] [PATCH v6 8/9] lmb: remove unused extern declaration
Simon Goldschmidt
- [U-Boot] [PATCH v6 9/9] tftp: prevent overwriting reserved memory
Simon Goldschmidt
- [U-Boot] [PATCH] image: fix compiling without CMD_FDT
Simon Goldschmidt
- [U-Boot] [PATCH 2/2] dm: video: lcd: MIGRATION: Add migration plan for video
Simon Goldschmidt
- [U-Boot] [PATCH v7 0/9] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [PATCH v7 1/9] test: add test for lib/lmb.c
Simon Goldschmidt
- [U-Boot] [PATCH v7 2/9] lmb: fix allocation at end of address range
Simon Goldschmidt
- [U-Boot] [PATCH v7 3/9] lib: lmb: reserving overlapping regions should fail
Simon Goldschmidt
- [U-Boot] [PATCH v7 4/9] fdt: parse "reserved-memory" for memory reservation
Simon Goldschmidt
- [U-Boot] [PATCH v7 5/9] lib: lmb: extend lmb for checks at load time
Simon Goldschmidt
- [U-Boot] [PATCH v7 6/9] fs: prevent overwriting reserved memory
Simon Goldschmidt
- [U-Boot] [PATCH v7 7/9] bootm: use new common function lmb_init_and_reserve
Simon Goldschmidt
- [U-Boot] [PATCH v7 8/9] lmb: remove unused extern declaration
Simon Goldschmidt
- [U-Boot] [PATCH v7 9/9] tftp: prevent overwriting reserved memory
Simon Goldschmidt
- [U-Boot] [PATCH v2] image: fix compiling without CMD_FDT
Simon Goldschmidt
- [U-Boot] [PATCH v2] image: fix compiling without CMD_FDT
Simon Goldschmidt
- [U-Boot] [PATCH v7 0/9] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [PATCH v8 00/10] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [PATCH v8 01/10] test: add test for lib/lmb.c
Simon Goldschmidt
- [U-Boot] [PATCH v8 02/10] lmb: fix allocation at end of address range
Simon Goldschmidt
- [U-Boot] [PATCH v8 03/10] lib: lmb: reserving overlapping regions should fail
Simon Goldschmidt
- [U-Boot] [PATCH v8 04/10] fdt: parse "reserved-memory" for memory reservation
Simon Goldschmidt
- [U-Boot] [PATCH v8 05/10] lib: lmb: extend lmb for checks at load time
Simon Goldschmidt
- [U-Boot] [PATCH v8 06/10] fs: prevent overwriting reserved memory
Simon Goldschmidt
- [U-Boot] [PATCH v8 07/10] bootm: use new common function lmb_init_and_reserve
Simon Goldschmidt
- [U-Boot] [PATCH v8 08/10] lmb: remove unused extern declaration
Simon Goldschmidt
- [U-Boot] [PATCH v8 09/10] tftp: prevent overwriting reserved memory
Simon Goldschmidt
- [U-Boot] [PATCH v8 10/10] arm: bootm: fix sp detection at end of address range
Simon Goldschmidt
- [U-Boot] [PATCH v8 10/10] arm: bootm: fix sp detection at end of address range
Simon Goldschmidt
- [U-Boot] [PATCH v9 00/10] Fix CVE-2018-18440 and CVE-2018-18439
Simon Goldschmidt
- [U-Boot] [PATCH v9 01/10] test: add test for lib/lmb.c
Simon Goldschmidt
- [U-Boot] [PATCH v9 02/10] lmb: fix allocation at end of address range
Simon Goldschmidt
- [U-Boot] [PATCH v9 03/10] lib: lmb: reserving overlapping regions should fail
Simon Goldschmidt
- [U-Boot] [PATCH v9 04/10] fdt: parse "reserved-memory" for memory reservation
Simon Goldschmidt
- [U-Boot] [PATCH v9 05/10] lib: lmb: extend lmb for checks at load time
Simon Goldschmidt
- [U-Boot] [PATCH v9 06/10] fs: prevent overwriting reserved memory
Simon Goldschmidt
- [U-Boot] [PATCH v9 07/10] bootm: use new common function lmb_init_and_reserve
Simon Goldschmidt
- [U-Boot] [PATCH v9 08/10] lmb: remove unused extern declaration
Simon Goldschmidt
- [U-Boot] [PATCH v9 09/10] tftp: prevent overwriting reserved memory
Simon Goldschmidt
- [U-Boot] [PATCH v9 10/10] arm: bootm: fix sp detection at end of address range
Simon Goldschmidt
- [U-Boot] SPL Platdata howto?
Simon Goldschmidt
- [U-Boot] SPL Platdata howto?
Simon Goldschmidt
- [U-Boot] list files on tftp / large kernel-image
Simon Goldschmidt
- [U-Boot] SPL Platdata howto?
Simon Goldschmidt
- [U-Boot] [U-Boot, PATCHv3, 1/4] dm: MIGRATION: Add migration plan for DM_MMC
Simon Goldschmidt
- [U-Boot] SPL Platdata howto?
Simon Goldschmidt
- [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [PATCH v9 10/10] arm: bootm: fix sp detection at end of address range
Simon Goldschmidt
- [U-Boot] [PATCH v9 10/10] arm: bootm: fix sp detection at end of address range
Simon Goldschmidt
- [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] SPL Platdata howto?
Simon Goldschmidt
- [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Simon Goldschmidt
- [U-Boot] [PATCH] rsa: read out public_exponent value based on 32-bit alignment
Simon Goldschmidt
- [U-Boot] [PATCH] dm: mmc: fsl_esdhc: Fix card detection
Yuichiro Goto
- [U-Boot] [U-Boot,v2] efi_loader: Align runtime section to 64kb
Alexander Graf
- [U-Boot] [PATCH 2/2] efi_loader: set the dhcp ack received flag
Alexander Graf
- [U-Boot] FEC and EFI Simple Network
Alexander Graf
- [U-Boot] distro: add more efi dtb prefixes
Alexander Graf
- [U-Boot] [PATCH] rpi: Set the default mmc max device to 2
Alexander Graf
- [U-Boot] [U-Boot, v2, 2/6] ARM: rpi_*_defconfig: Add support to find UUID for filesystem
Alexander Graf
- [U-Boot] rpi: Enable command bmp
Alexander Graf
- [U-Boot] rpi: add URL of official revision code list
Alexander Graf
- [U-Boot] rpi: add 3 Model A+
Alexander Graf
- [U-Boot] distro: add more efi dtb prefixes
Alexander Graf
- [U-Boot] [U-Boot, v2, 2/6] ARM: rpi_*_defconfig: Add support to find UUID for filesystem
Alexander Graf
- [U-Boot] [PATCH v2] efi_loader: set image_base and image_size to correct values
Alexander Graf
- [U-Boot] [PATCH v3 1/1] efi_loader: rework fdt handling in distro boot script
Alexander Graf
- [U-Boot] [PATCH v2 03/14] efi_loader: bootmgr: allow for running a given load option
Alexander Graf
- [U-Boot] [PATCH v2 04/14] cmd: add efishell command
Alexander Graf
- [U-Boot] [PATCH v2 05/14] cmd: efishell: add devices command
Alexander Graf
- [U-Boot] [PATCH v2 08/14] cmd: efishell: add memmap command
Alexander Graf
- [U-Boot] [PATCH v2 10/14] cmd: bootefi: carve out fdt parameter handling
Alexander Graf
- [U-Boot] [PATCH v2 12/14] cmd: run: add "-e" option to run an EFI application
Alexander Graf
- [U-Boot] [PATCH v2 13/14] cmd: efishell: export uefi variable helper functions
Alexander Graf
- [U-Boot] [PATCH v3 1/1] efi_loader: rework fdt handling in distro boot script
Alexander Graf
- [U-Boot] [PATCH] tools: zynqmpimage: round up partition size
Alexander Graf
- [U-Boot] [PATCH v2 03/14] efi_loader: bootmgr: allow for running a given load option
Alexander Graf
- [U-Boot] [PATCH v2 04/14] cmd: add efishell command
Alexander Graf
- [U-Boot] [PATCH] tools: zynqmpimage: round up partition size
Alexander Graf
- [U-Boot] [PATCH v2] tools: zynqmpimage: round up partition size
Alexander Graf
- [U-Boot] [PULL] efi patch queue 2018-12-03
Alexander Graf
- [U-Boot] rpi: Enable command bmp
Alexander Graf
- [U-Boot] [PULL] rpi patch queue 2018-12-03
Alexander Graf
- [U-Boot] [PATCH v3 0/4] Add Rock960 and Ficus 96Board support
Alexander Graf
- [U-Boot] [BUG] Odroid-C2 does not boot with U-Boot master anymore
Alexander Graf
- [U-Boot] [BUG] Odroid-C2 does not boot with U-Boot master anymore
Alexander Graf
- [U-Boot] [PATCH] efi_loader: Make RTS relocation more robust
Alexander Graf
- [U-Boot] [PATCH v2] efi_loader: Make RTS relocation more robust
Alexander Graf
- [U-Boot] [PATCH 1/1] distro_bootcmd: add NVME support
Alexander Graf
- [U-Boot] [PATCH v2 1/1] efi_loader: efi_add_runtime_mmio()
Alexander Graf
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
Alexander Graf
- [U-Boot] [PATCH v3 8/8] cmd: env: add "-e" option for handling UEFI variables
Alexander Graf
- [U-Boot] [PATCH 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior
Alexander Graf
- [U-Boot] [PATCH 2/5] efi_loader: bootmgr: allow for running a given load option
Alexander Graf
- [U-Boot] [PATCH 3/5] cmd: bootefi: carve out fdt parameter handling
Alexander Graf
- [U-Boot] [PATCH 4/5] cmd: bootefi: run an EFI application of a specific load option
Alexander Graf
- [U-Boot] [PATCH 5/5] cmd: run: add "-e" option to run an EFI application
Alexander Graf
- [U-Boot] [PATCH] efi_loader: move efi_init_obj_list() to a new efi_setup.c
Alexander Graf
- [U-Boot] [RESEND PATCH 1/2] ARM: qemu-arm: enable usb mass storage in default configuration
Alexander Graf
- [U-Boot] [RESEND PATCH 2/2] ARM: qemu-arm: enable USB boot in distro boot with UEFI
Alexander Graf
- [U-Boot] [U-Boot, v2] efi_loader: Make RTS relocation more robust
Alexander Graf
- [U-Boot] [PATCH v2 05/14] cmd: efishell: add devices command
Alexander Graf
- [U-Boot] [PATCH v2 10/14] cmd: bootefi: carve out fdt parameter handling
Alexander Graf
- [U-Boot] [PATCH v2 13/14] cmd: efishell: export uefi variable helper functions
Alexander Graf
- [U-Boot] [RFC 1/1] efi_loader: refactor switch to hypervisor mode
Alexander Graf
- [U-Boot] [RFC 1/1] efi_loader: refactor switch to hypervisor mode
Alexander Graf
- [U-Boot] [PATCH v2 05/14] cmd: efishell: add devices command
Alexander Graf
- [U-Boot] [RFC 1/1] efi_loader: refactor switch to hypervisor mode
Alexander Graf
- [U-Boot] [RFC 1/1] efi_loader: refactor switch to hypervisor mode
Alexander Graf
- [U-Boot] [PATCH v2 1/1] efi_loader: refactor switch to hypervisor mode
Alexander Graf
- [U-Boot] [PATCH v3 8/8] cmd: env: add "-e" option for handling UEFI variables
Alexander Graf
- [U-Boot] [PATCH 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior
Alexander Graf
- [U-Boot] [PATCH 5/5] cmd: run: add "-e" option to run an EFI application
Alexander Graf
- [U-Boot] [PATCH 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior
Alexander Graf
- [U-Boot] [PULL 2019.01] efi patch queue 2018-12-27
Alexander Graf
- [U-Boot] [PATCH v2] efi_loader: Make RTS relocation more robust
Jonathan Gray
- [U-Boot] [PATCH] poplar: fix boot failure caused by serial driver change
Shawn Guo
- [U-Boot] [PATCH 09/13] serial: Remove DM_FLAG_PRE_RELOC flag in various drivers
Shawn Guo
- [U-Boot] [PATCH] poplar: add a co-maintainer for poplar board
Shawn Guo
- [U-Boot] [PATCH] mmc: hi6220_dw_mmc: add driver model support
Shawn Guo
- [U-Boot] [PATCH] poplar: save environment at a different offset
Shawn Guo
- [U-Boot] [PATCH 0/2] Enable fastboot support for Poplar board
Shawn Guo
- [U-Boot] [PATCH 1/2] poplar: add DWC2 OTG gadget support
Shawn Guo
- [U-Boot] [PATCH 2/2] poplar_defconfig: enable fastboot support
Shawn Guo
- [U-Boot] [PATCH] cmd: add clear screen 'cls' command
Anatolij Gustschin
- [U-Boot] [PATCH v2] cmd: add clear screen 'cls' command
Anatolij Gustschin
- [U-Boot] [PATCH v2] cmd: bmp: manage centered display
Anatolij Gustschin
- [U-Boot] [PATCH] video: Allow driver to specify the line length
Anatolij Gustschin
- [U-Boot] [PATCH] cmd: bmp: manage centered display
Anatolij Gustschin
- [U-Boot] [PATCH] video: use BMP_ALIGN_CENTER define from splash.h
Anatolij Gustschin
- [U-Boot] [PATCH] cmd: bmp: manage centered display
Anatolij Gustschin
- [U-Boot] u-boot-video/master fails test/py ut_dm_rtc_set_get
Anatolij Gustschin
- [U-Boot] [PATCH v2] cmd: bmp: manage centered display
Anatolij Gustschin
- [U-Boot] [PATCH v2] cmd: add clear screen 'cls' command
Anatolij Gustschin
- [U-Boot] [PATCH] video: use BMP_ALIGN_CENTER define from splash.h
Anatolij Gustschin
- [U-Boot] Please pull u-boot-video
Anatolij Gustschin
- [U-Boot] U-Boot test failures; rebase on master
Anatolij Gustschin
- [U-Boot] [PATCH 1/3] video: Add information about using TrueType fonts
Anatolij Gustschin
- [U-Boot] [PATCH 2/3] video: Add a default TrueType font
Anatolij Gustschin
- [U-Boot] [PATCH 3/3] video: rockchip: Use TrueType fonts with jerry
Anatolij Gustschin
- [U-Boot] [PATCH] dm: video: fix test failures with enabled default TrueType font
Anatolij Gustschin
- [U-Boot] [PATCH] fs: cbfs: remove wrong header validation
Andre Heider
- [U-Boot] [PATCH v2 0/2] Enable command bmp on Raspberry Pi boards
Adam Heinrich
- [U-Boot] [PATCH v2 1/2] cmd: bmp: Make integer-to-pointer cast platform, independent
Adam Heinrich
- [U-Boot] [PATCH v2 2/2] rpi: Enable command bmp
Adam Heinrich
- [U-Boot] [BUG] serial: ns16550: missing characters on serial output of rk3399 board
Roosen Henri
- [U-Boot] [PATCH v2 0/6] Add support for DM_USB and DM_USB_DEV to TI's K2G platforms
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 1/6] usb: dwc3-generic: make it compatible with "ti, keystone-dwc3"
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 2/6] board: ks2_evm: Enable the USB clocks if DM_USB is used
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 3/6] ARM: dts: k2g-evm: enable USB0 and USB1
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 4/6] PHY: Add phy driver for the keystone USB PHY
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 5/6] usb: host: replace xhci-keystone driver by the generic dwc3 driver
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 6/6] configs: k2g_evm: Enable DFU on K2G EVM
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 00/14] Add support for DM_USB and DM_USB_DEV to TI's am335x and am43xx_evm platforms
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 01/14] spl: drivers: Link usb common library to SPL if USB gadget is enabled
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 02/14] spl: net: dm: usb: bind the gadget before attempting to load the image
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 03/14] phy: omap_usb2: Add support for am437x
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 04/14] dwc3-generic: Add support for the am437x
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 05/14] board: ti: am43xx: turn on USB clocks
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 06/14] dts: Add a u-boot specific dtsi file for the am4372
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 07/14] dts: am4372: Enable USB1 in SPL
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 08/14] configs: am43xx_evm: Enable DM_USB and DM_USB_GADGET
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 09/14] configs: am43xx: Enable RNDIS support in SPL
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 10/14] usb: musb-new: Allow the diver not to use the set_phy_power() callback
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 11/14] usb: musb-new: Add support for DM_USB
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 12/14] arm: am33xx: Register USB controllers if DM_USB is used but not OF_CONTROL
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 13/14] configs: am335x_evm: Do not disable DM_USB in SPL
Jean-Jacques Hiblot
- [U-Boot] [PATCH v2 14/14] configs: am335x_boneblack_vboot: enable DM_USB and RNDIS boot in SPl
Jean-Jacques Hiblot
- [U-Boot] [PATCH v4 00/10] Improvements for the dwc3_generic driver
Jean-Jacques Hiblot
- [U-Boot] [PATCH v3 00/19] DM_I2C_COMPAT removal for all ti platforms
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 00/19] DM_I2C_COMPAT removal for all ti platforms
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 01/19] cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 02/19] dm: i2c: Make i2c_get_chip_for_busnum() fail if the chip is not detected
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 03/19] dm: device: Allow using uclass_find_device_by_seq() without OF_CONTROL
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 04/19] configs: am335x: am57x: dra7x: Enable CONFIG_SPL_DM_SEQ_ALIAS
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 05/19] i2c: omap24xx_i2c: Move away from SoC specific headers for reg offset
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 06/19] i2c: omap24xx_i2c: Use platdata to probe the device
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 07/19] am335x: Register the I2C controllers if DM_I2C is used.
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 08/19] dts: am43x: omap5: Add node for I2C in SPL
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 09/19] omap: detect the board after DM is available
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 10/19] power: make most tps drivers and the twl4030 driver compatible with DM_I2C
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 11/19] ti: common: board_detect: Allow DM I2C without CONFIG_DM_I2C_COMPAT
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 12/19] configs: am335x_pdu001: remove CONFIG_DM_I2C_COMPAT
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 13/19] ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 14/19] am57xx: remove non-DM I2C code
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 15/19] configs: dra7xx-evm: increase the size of the malloc's pool before relocation
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 16/19] lib: fdtdec: Add function re-setup the fdt more effeciently
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 17/19] drivers: core: Add the option SPL_DM_DEVICE_REMOVE to the Kconfig
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 18/19] drivers: core: nullify gd->dm_root after dm_uninit()
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 19/19] dra7: Allow selecting a new dtb after board detection.
Jean-Jacques Hiblot
- [U-Boot] [RESEND PATCH v3 1/3] Don't enable CONFIG_SPL_DM_USB for non-DM SPL
Jean-Jacques Hiblot
- [U-Boot] Regression: dm: i2c: Make i2c_get_chip_for_busnum() fail if the chip is not detected
Jean-Jacques Hiblot
- [U-Boot] [PATCH] Drivers: USB: MUSB: Remove legacy CONFIG_USB_DA8XX
Jean-Jacques Hiblot
- [U-Boot] [PATCH] Drivers: USB: Remove Legacy CONFIG_USB_DAVINCI
Jean-Jacques Hiblot
- [U-Boot] [PATCH] Drivers: USB: MUSB: Remove legacy CONFIG_USB_DA8XX
Jean-Jacques Hiblot
- [U-Boot] [PATCH] Drivers: USB: Remove Legacy CONFIG_USB_DAVINCI
Jean-Jacques Hiblot
- [U-Boot] policy regarding unused code
Jean-Jacques Hiblot
- [U-Boot] policy regarding unused code
Jean-Jacques Hiblot
- [U-Boot] policy regarding unused code
Jean-Jacques Hiblot
- [U-Boot] Regression: dm: i2c: Make i2c_get_chip_for_busnum() fail if the chip is not detected
Jean-Jacques Hiblot
- [U-Boot] Regression: dm: i2c: Make i2c_get_chip_for_busnum() fail if the chip is not detected
Jean-Jacques Hiblot
- [U-Boot] [PATCH] i2c: tegra: Fix regression by implementing a dummy probe_chip() callback
Jean-Jacques Hiblot
- [U-Boot] policy regarding unused code
Jean-Jacques Hiblot
- [U-Boot] [PATCH] Drivers: USB: MUSB: Remove legacy CONFIG_USB_DA8XX
Jean-Jacques Hiblot
- [U-Boot] policy regarding unused code
Jean-Jacques Hiblot
- [U-Boot] [PATCH 1/1] usb: musb-new: sunxi: Fix null pointer access
Jean-Jacques Hiblot
- [U-Boot] [PATCH 1/1] usb: musb-new: sunxi: Fix null pointer access
Jean-Jacques Hiblot
- [U-Boot] changing of fastboot index
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 0/2] Fix USB port indexes for USB gadget commands
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 1/2] dm: usb: udc: Use SEQ_ALIAS to index the USB gadget ports
Jean-Jacques Hiblot
- [U-Boot] [PATCH v1 2/2] ARM: dts: define USB aliases for all omap5 platforms
Jean-Jacques Hiblot
- [U-Boot] [PATCH v4 06/10] dm: usb: create a new UCLASS ID for USB gadget devices
Jean-Jacques Hiblot
- [U-Boot] [PATCH v4 06/10] dm: usb: create a new UCLASS ID for USB gadget devices
Jean-Jacques Hiblot
- [U-Boot] [PATCH 2/2] USB: musb-new: omap2430: Add hooks for Peripheral support.
Jean-Jacques Hiblot
- [U-Boot] [linux-sunxi] CONFIG_DM_USB breakage on sunxi boards with musb?
Jean-Jacques Hiblot
- [U-Boot] [PATCH 2/2] USB: musb-new: omap2430: Add hooks for Peripheral support.
Jean-Jacques Hiblot
- [U-Boot] [linux-sunxi] CONFIG_DM_USB breakage on sunxi boards with musb?
Jean-Jacques Hiblot
- [U-Boot] [PATCH] dm: usb: gadget: Fix boot breakage on sunxi platforms
Jean-Jacques Hiblot
- [U-Boot] [PATCH] pinctrl: meson: axg: Fix GPIO pin offsets
Kevin Hilman
- [U-Boot] [PATCH 1/2] armv8: ls1043a: add SVR definitions for 23x23 package silicon
Z.q. Hou
- [U-Boot] [PATCH 2/2] armv8: ls1043a: correct the PCIe INTx fixup
Z.q. Hou
- [U-Boot] [u-boot][PATCH] ls1046aqds: Bypass xfi port fixup for KR mode
Florinel Iordache
- [U-Boot] [PATCH] imx8mq_evk_defconfig: Move file system options to Kconfig
Offouga Joris
- [U-Boot] Re : Re: [PATCH] exynos: imply SYS_THUMB_BUILD
Minkyu Kang
- [U-Boot] [PATCH v2 00/11] samsung: Tidy up sound, DM_MMC drop dead code
Minkyu Kang
- [U-Boot] [PATCH 1/2] exynos5-dt-types: add missing dtb file for Odroid HC1/HC2
Minkyu Kang
- [U-Boot] [PATCH 2/2] odroid: Update README.odroid for support of Odroid HC1
Minkyu Kang
- [U-Boot] [PATCH] Revert "arm: config: fix default console only to specify the device"
Minkyu Kang
- [U-Boot] Re : Re: [PATCH] exynos: imply SYS_THUMB_BUILD
Minkyu Kang
- [U-Boot] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] [PATCH] fsl-layerscape: dpaa: fix fsl-mc status in fdt with bootefi
Mian Yousaf Kaukab
- [U-Boot] [PATCH] board: ti: ks2_evm: Over ride spl_get_load_buffer function
Keerthy
- [U-Boot] Please pull u-boot-dm
Keerthy
- [U-Boot] Please pull u-boot-dm
Keerthy
- [U-Boot] [PATCH 0/2] lib: fdtdec: Couple of fies
Keerthy
- [U-Boot] [PATCH 1/2] lib: fdtdec: fdtdec_get_addr_size_fixed remove checks
Keerthy
- [U-Boot] [PATCH 2/2] lib: fdtdec: fixup fdtdec_get_addr_size
Keerthy
- [U-Boot] [PATCH] evb_rk3399: revert CONFIG_SYS_MMC_ENV_DEV to 0
Max Kellermann
- [U-Boot] [PATCH] evb_rk3399: revert CONFIG_SYS_MMC_ENV_DEV to 0
Max Kellermann
- [U-Boot] [RFC 1/1] efi_loader: refactor switch to hypervisor mode
Mark Kettenis
- [U-Boot] [RFC 1/1] efi_loader: refactor switch to hypervisor mode
Mark Kettenis
- [U-Boot] [PATCH] usb: musb-new: Add CONFIG_USB_MUSB_INIT_TIMEOUT
Alex Kiernan
- [U-Boot] [PATCH] usb: musb-new: Add CONFIG_USB_MUSB_INIT_TIMEOUT
Alex Kiernan
- [U-Boot] [PATCH] usb: musb-new: Add CONFIG_USB_MUSB_INIT_TIMEOUT
Alex Kiernan
- [U-Boot] [PATCH] drivers: block: Allow to cache 4K blocks by default
Jan Kiszka
- [U-Boot] CONFIG_CMD_SETEXPR disabled in many defconfigs
Jan Kiszka
- [U-Boot] [PATCH] drivers: block: Allow to cache 4K blocks by default
Jan Kiszka
- [U-Boot] Quick question on i.MX8MQ
Sergey Kubushyn
- [U-Boot] i.MX8M layout, rephrased
Sergey Kubushyn
- [U-Boot] i.MX8M layout, rephrased
Sergey Kubushyn
- [U-Boot] i.MX8M layout, rephrased
Sergey Kubushyn
- [U-Boot] i.MX8M layout, rephrased
Sergey Kubushyn
- [U-Boot] [PATCH] driver/spi: fsl_qspi: Remove non-DM stuff
Ashish Kumar
- [U-Boot] [PATCH 00/16] SF: Migrate to Linux SPI NOR framework
Ashish Kumar
- [U-Boot] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Priit Laes
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Priit Laes
- [U-Boot] CONFIG_DM_USB breakage on sunxi boards with musb?
Priit Laes
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Priit Laes
- [U-Boot] [linux-sunxi] CONFIG_DM_USB breakage on sunxi boards with musb?
Priit Laes
- [U-Boot] [PATCH 1/3] videomodes: Allow EDID timings where hsync/vsync pulse is 0
Priit Laes
- [U-Boot] [PATCH 2/3] sunxi: display: Move DDC PLL setup to HDMI init
Priit Laes
- [U-Boot] [PATCH 3/3] sunxi: display: Implement fallback to ddc probe when hpd fails
Priit Laes
- [U-Boot] [linux-sunxi] CONFIG_DM_USB breakage on sunxi boards with musb?
Priit Laes
- [U-Boot] [linux-sunxi] CONFIG_DM_USB breakage on sunxi boards with musb?
Priit Laes
- [U-Boot] [linux-sunxi] [PATCH] Add NFC register definitions for Allwinner A20 SoC
Priit Laes
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Priit Laes
- [U-Boot] 0001-mmc-Add-missing-ifdef
Mikhail Lappo
- [U-Boot] 0001-mmc-Add-missing-ifdef
Mikhail Lappo
- [U-Boot] [PATCH] imx: hab: Convert non-NULL IVT DCD pointer warning to an error
Breno Matheus Lima
- [U-Boot] [Patch] Enable I2C0 of NanoPiNeo2
Ronny Lubke
- [U-Boot] [PATCH 1/4] scsi: ceva: add ls1046a soc support
Peng Ma
- [U-Boot] [PATCH] arm64: lx2160ardb: enable DM support for sata
Peng Ma
- [U-Boot] [PATCH] arm64: lx2160ardb: enable DM support for sata
Peng Ma
- [U-Boot] [v2] arm64: lx2160ardb: enable DM support for sata
Peng Ma
- [U-Boot] [PATCH] usb: composite: Move bitmap related operations to ./include/linux/bitmap.h
Lukasz Majewski
- [U-Boot] [PATCH v1 0/3] ddr: vybrid: Support for vf610 built-in DDR3 memory calibration
Lukasz Majewski
- [U-Boot] [PATCH v1 1/3] ddr: vybrid: Add DDRMC calibration related registers (DQS to DQ)
Lukasz Majewski
- [U-Boot] [PATCH v1 2/3] ddr: vybrid: Provide code to perform on-boot calibration
Lukasz Majewski
- [U-Boot] [PATCH v1 3/3] ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code
Lukasz Majewski
- [U-Boot] [PATCH v1 0/3] ddr: vybrid: Support for vf610 built-in DDR3 memory calibration
Lukasz Majewski
- [U-Boot] [PATCH] nand: vybrid: Use calloc() instead of malloc() to allocate struct nfc
Lukasz Majewski
- [U-Boot] [PATCH 1/2] Kconfig: Add entry for VF610 NAND NFC device tree aware driver
Lukasz Majewski
- [U-Boot] [PATCH 2/2] nand: vybrid: Extend the vf610 NFC NAND driver to support device tree (and DM)
Lukasz Majewski
- [U-Boot] [PATCH 1/2] Kconfig: Add entry for VF610 NAND NFC device tree aware driver
Lukasz Majewski
- [U-Boot] [PATCH v1 2/3] ddr: vybrid: Provide code to perform on-boot calibration
Lukasz Majewski
- [U-Boot] [PATCH v1 3/3] ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code
Lukasz Majewski
- [U-Boot] [PATCH] exynos: imply SYS_THUMB_BUILD
Lukasz Majewski
- [U-Boot] Question regarding early pinctrl and driver model in u-boot
Lukasz Majewski
- [U-Boot] [PATCH v1 2/4] ARM: vf610: ddrmc: fix CR138 preprocessor define
Lukasz Majewski
- [U-Boot] [PATCH v1 3/4] ARM: vf610: ddrmc: fix initialization completion detection
Lukasz Majewski
- [U-Boot] [PATCH v1 4/4] ARM: vf610: ddrmc: do not write CR79 by default
Lukasz Majewski
- [U-Boot] [PATCH v1 1/4] toradex: colibri_vf: fix memory initialization
Lukasz Majewski
- [U-Boot] [PATCH v2 0/3] ddr: vybrid: Support for vf610 built-in DDR3 memory calibration
Lukasz Majewski
- [U-Boot] [PATCH v2 1/3] ddr: vybrid: Add DDRMC calibration related registers (DQS to DQ)
Lukasz Majewski
- [U-Boot] [PATCH v2 2/3] ddr: vybrid: Provide code to perform on-boot calibration
Lukasz Majewski
- [U-Boot] [PATCH v2 3/3] ddr: vybrid: Add calibration code to memory controler's (DDRMC) setup code
Lukasz Majewski
- [U-Boot] Question regarding early pinctrl and driver model in u-boot
Lukasz Majewski
- [U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly
Lukasz Majewski
- [U-Boot] [PATCH v1] board: toradex: colibri_vf: unset NFS and LOADS/B
Lukasz Majewski
- [U-Boot] [PATCH v1] mtd: nand: raw: allow to disable unneeded ECC layouts
Lukasz Majewski
- [U-Boot] [PATCH v1] fs: fat: dynamically allocate memory for temporary buffer
Lukasz Majewski
- [U-Boot] [PATCH v2 0/6] Add support for DM_USB and DM_USB_DEV to TI's K2G platforms
Lukasz Majewski
- [U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly
Lukasz Majewski
- [U-Boot] [PATCH v4 01/11] mtd: Add a function to report when the MTD dev list has been updated
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu (09.12.2018)
Lukasz Majewski
- [U-Boot] [PATCH 2/4] Convert CONFIG_BOARD_TYPES to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 4/7] dfu: sf: Read default speed and mode values from DT
Lukasz Majewski
- [U-Boot] [PATCH 6/7] env: Read default speed and mode values from DT
Lukasz Majewski
- [U-Boot] [RESEND PATCH v3 3/3] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin
Lukasz Majewski
- [U-Boot] policy regarding unused code
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu (13.12.2018)
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu (13.12.2018)
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu (13.12.2018)
Lukasz Majewski
- [U-Boot] [PATCH] usb: composite: Fix max packet size for USB3.0
Lukasz Majewski
- [U-Boot] [PATCH v1 1/2] dm: usb: udc: Use SEQ_ALIAS to index the USB gadget ports
Lukasz Majewski
- [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214
Lukasz Majewski
- [U-Boot] [PATCH v2 01/11] odroid: Resync defconfigs
Lukasz Majewski
- [U-Boot] [PATCH v2 02/11] Convert CONFIG_BOARD_TYPES to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v2 03/11] exynos: Drop duplicate 'model' line
Lukasz Majewski
- [U-Boot] [PATCH v2 04/11] exynos: Convert to use CONFIG_BLK
Lukasz Majewski
- [U-Boot] [PATCH v2 08/11] samsung: Drop board_enable_audio_codec()
Lukasz Majewski
- [U-Boot] [PATCH v2 09/11] samsung: mmc: Drop old MMC init code
Lukasz Majewski
- [U-Boot] [PATCH v2 10/11] fdt: samsung: Drop unused fdt_compat_id values
Lukasz Majewski
- [U-Boot] [PATCH v2 11/11] fdt: tegra: Drop COMPAT_AMS_AS3722
Lukasz Majewski
- [U-Boot] [PATCH v2 05/11] sound: Add a driver for max98088
Lukasz Majewski
- [U-Boot] [PATCH v2 06/11] spring: Update sound to use max98088 codec
Lukasz Majewski
- [U-Boot] [PATCH v2 07/11] spring: Update flashmap details
Lukasz Majewski
- [U-Boot] [PATCH] dm: pinctrl: Prevent (re-)configuring pins when already done before relocation
Lukasz Majewski
- [U-Boot] [PATCH] fdt: Add warning about CONFIG_OF_EMBED
Lukasz Majewski
- [U-Boot] U-Boot 2018.09 imx6ull mass storage issue
Lukasz Majewski
- [U-Boot] U-Boot 2018.09 imx6ull mass storage issue
Lukasz Majewski
- [U-Boot] [PATCH] fdt: Add warning about CONFIG_OF_EMBED
Lukasz Majewski
- [U-Boot] [PATCH] m53menlo: fix splashfile location
Olaf Mandel
- [U-Boot] [PATCH] m53menlo: fix addmtd cmd in default environment
Olaf Mandel
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] usb: musb-new: sunxi: Fix null pointer access
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] usb: musb-new: sunxi: Fix null pointer access
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] usb: musb-new: sunxi: Fix null pointer access
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Stefan Mavrodiev
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Stefan Mavrodiev
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Bin Meng
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Bin Meng
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Bin Meng
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Bin Meng
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Bin Meng
- [U-Boot] [PATCH 00/19] riscv: Adding RISC-V CPU and timer driver
Bin Meng
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Bin Meng
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Bin Meng
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Bin Meng
- [U-Boot] [PATCH 05/19] riscv: Add a SYSCON driver for Core Local Interruptor
Bin Meng
- [U-Boot] [PATCH 00/19] riscv: Adding RISC-V CPU and timer driver
Bin Meng
- [U-Boot] [PATCH 05/19] riscv: Add a SYSCON driver for Core Local Interruptor
Bin Meng
- [U-Boot] [PATCH v2 4/5] fdtdec: switch GENERIC_SPI_FLASH to jedec, spi-nor
Bin Meng
- [U-Boot] [PATCH 04/19] cpu: Add a RISC-V CPU driver
Bin Meng
- [U-Boot] [PATCH 05/19] riscv: Add a SYSCON driver for Core Local Interruptor
Bin Meng
- [U-Boot] [PATCH 05/19] riscv: Add a SYSCON driver for Core Local Interruptor
Bin Meng
- [U-Boot] [PATCH v2 00/20] riscv: Adding RISC-V CPU and timer driver
Bin Meng
- [U-Boot] [PATCH v2 01/20] riscv: add Kconfig entries for the code model
Bin Meng
- [U-Boot] [PATCH v2 02/20] dm: cpu: Add timebase frequency to the platdata
Bin Meng
- [U-Boot] [PATCH v2 03/20] riscv: qemu: Create a simple-bus driver for the soc node
Bin Meng
- [U-Boot] [PATCH v2 04/20] cpu: Add a RISC-V CPU driver
Bin Meng
- [U-Boot] [PATCH v2 05/20] timer: Add generic driver for RISC-V privileged architecture defined timer
Bin Meng
- [U-Boot] [PATCH v2 06/20] riscv: ax25: Hide the ax25-specific Kconfig option
Bin Meng
- [U-Boot] [PATCH v2 07/20] riscv: Introduce a Kconfig option for machine mode
Bin Meng
- [U-Boot] [PATCH v2 08/20] riscv: Add a SYSCON driver for SiFive's Core Local Interruptor
Bin Meng
- [U-Boot] [PATCH v2 09/20] riscv: Implement riscv_get_time() API using rdtime instruction
Bin Meng
- [U-Boot] [PATCH v2 10/20] riscv: qemu: Add platform-specific Kconfig options
Bin Meng
- [U-Boot] [PATCH v2 11/20] riscv: Enlarge the default SYS_MALLOC_F_LEN
Bin Meng
- [U-Boot] [PATCH v2 12/20] riscv: Probe cpus during boot
Bin Meng
- [U-Boot] [PATCH v2 13/20] riscv: Add CSR numbers
Bin Meng
- [U-Boot] [PATCH v2 14/20] riscv: Add exception codes for xcause register
Bin Meng
- [U-Boot] [PATCH v2 15/20] riscv: Add indirect stringification to csr_xxx ops
Bin Meng
- [U-Boot] [PATCH v2 16/20] riscv: Do some basic architecture level cpu initialization
Bin Meng
- [U-Boot] [PATCH v2 17/20] riscv: Move trap handler codes to mtrap.S
Bin Meng
- [U-Boot] [PATCH v2 18/20] riscv: Fix context restore before returning from trap handler
Bin Meng
- [U-Boot] [PATCH v2 19/20] riscv: Return to previous privilege level after trap handling
Bin Meng
- [U-Boot] [PATCH v2 20/20] riscv: Adjust the _exit_trap() position to come before handle_trap()
Bin Meng
- [U-Boot] [PATCH 0/2] SiFive UART support
Bin Meng
- [U-Boot] [PATCH 1/2] drivers: serial: Add SiFive UART driver
Bin Meng
- [U-Boot] [PATCH 2/2] riscv: qemu: Enable SiFive UART driver in defconfigs
Bin Meng
- [U-Boot] [PATCH v2 1/2] x86: Wrap calls to 8259 with CONFIG_I8259_PIC
Bin Meng
- [U-Boot] [PATCH v2 2/2] x86: kconfig: Allow board defconfig file to disable 8259 and APIC
Bin Meng
- [U-Boot] [PATCH 1/2] coreboot: only init usb if necessary
Bin Meng
- [U-Boot] [PATCH 2/2] efi: payload: only init usb if necessary
Bin Meng
- [U-Boot] Please pull u-boot-x86
Bin Meng
- [U-Boot] [PATCH v2 16/20] riscv: Do some basic architecture level cpu initialization
Bin Meng
- [U-Boot] [PATCH v2 05/20] timer: Add generic driver for RISC-V privileged architecture defined timer
Bin Meng
- [U-Boot] [PATCH v2 06/20] riscv: ax25: Hide the ax25-specific Kconfig option
Bin Meng
- [U-Boot] [PATCH v3 00/25] riscv: Adding RISC-V CPU and timer driver
Bin Meng
- [U-Boot] [PATCH v3 01/25] riscv: add Kconfig entries for the code model
Bin Meng
- [U-Boot] [PATCH v3 02/25] dm: cpu: Add timebase frequency to the platdata
Bin Meng
- [U-Boot] [PATCH v3 03/25] riscv: qemu: Create a simple-bus driver for the soc node
Bin Meng
- [U-Boot] [PATCH v3 04/25] cpu: Add a RISC-V CPU driver
Bin Meng
- [U-Boot] [PATCH v3 05/25] timer: Add generic driver for RISC-V privileged architecture defined timer
Bin Meng
- [U-Boot] [PATCH v3 06/25] riscv: ax25: Hide the ax25-specific Kconfig option
Bin Meng
- [U-Boot] [PATCH v3 07/25] riscv: Introduce a Kconfig option for machine mode
Bin Meng
- [U-Boot] [PATCH v3 08/25] riscv: Add a SYSCON driver for SiFive's Core Local Interruptor
Bin Meng
- [U-Boot] [PATCH v3 09/25] riscv: Implement riscv_get_time() API using rdtime instruction
Bin Meng
- [U-Boot] [PATCH v3 10/25] riscv: qemu: Add platform-specific Kconfig options
Bin Meng
- [U-Boot] [PATCH v3 11/25] riscv: Enlarge the default SYS_MALLOC_F_LEN
Bin Meng
- [U-Boot] [PATCH v3 12/25] riscv: Probe cpus during boot
Bin Meng
- [U-Boot] [PATCH v3 13/25] riscv: Remove non-DM version of print_cpuinfo()
Bin Meng
- [U-Boot] [PATCH v3 14/25] riscv: Add CSR numbers
Bin Meng
- [U-Boot] [PATCH v3 15/25] riscv: Add exception codes for xcause register
Bin Meng
- [U-Boot] [PATCH v3 16/25] riscv: Update supports_extension() to use desc from cpu driver
Bin Meng
- [U-Boot] [PATCH v3 17/25] riscv: Add indirect stringification to csr_xxx ops
Bin Meng
- [U-Boot] [PATCH v3 18/25] riscv: Do some basic architecture level cpu initialization
Bin Meng
- [U-Boot] [PATCH v3 19/25] riscv: Move trap handler codes to mtrap.S
Bin Meng
- [U-Boot] [PATCH v3 20/25] riscv: Fix context restore before returning from trap handler
Bin Meng
- [U-Boot] [PATCH v3 21/25] riscv: Return to previous privilege level after trap handling
Bin Meng
- [U-Boot] [PATCH v3 22/25] riscv: Adjust the _exit_trap() position to come before handle_trap()
Bin Meng
- [U-Boot] [PATCH v3 23/25] riscv: Save boot hart id to the global data
Bin Meng
- [U-Boot] [PATCH v3 24/25] riscv: bootm: Change to use boot_hart from global data
Bin Meng
- [U-Boot] [PATCH v3 25/25] riscv: Remove ae350.dts
Bin Meng
- [U-Boot] [PATCH v2 0/2] SiFive UART support
Bin Meng
- [U-Boot] [PATCH v2 0/2] SiFive UART support
Bin Meng
- [U-Boot] [PATCH v2 0/2] SiFive UART support
Bin Meng
- [U-Boot] [PATCH v2 1/2] drivers: serial: Add SiFive UART driver
Bin Meng
- [U-Boot] [PATCH v2 2/2] riscv: qemu: Imply SIFIVE_SERIAL for emulation
Bin Meng
- [U-Boot] [PATCH v3 16/25] riscv: Update supports_extension() to use desc from cpu driver
Bin Meng
- [U-Boot] [PATCH v4 00/25] riscv: Adding RISC-V CPU and timer driver
Bin Meng
- [U-Boot] [PATCH v4 01/25] riscv: add Kconfig entries for the code model
Bin Meng
- [U-Boot] [PATCH v4 02/25] dm: cpu: Add timebase frequency to the platdata
Bin Meng
- [U-Boot] [PATCH v4 03/25] riscv: qemu: Create a simple-bus driver for the soc node
Bin Meng
- [U-Boot] [PATCH v4 04/25] cpu: Add a RISC-V CPU driver
Bin Meng
- [U-Boot] [PATCH v4 05/25] timer: Add generic driver for RISC-V privileged architecture defined timer
Bin Meng
- [U-Boot] [PATCH v4 06/25] riscv: ax25: Hide the ax25-specific Kconfig option
Bin Meng
- [U-Boot] [PATCH v4 07/25] riscv: Introduce a Kconfig option for machine mode
Bin Meng
- [U-Boot] [PATCH v4 08/25] riscv: Add a SYSCON driver for SiFive's Core Local Interruptor
Bin Meng
- [U-Boot] [PATCH v4 09/25] riscv: Implement riscv_get_time() API using rdtime instruction
Bin Meng
- [U-Boot] [PATCH v4 10/25] riscv: qemu: Add platform-specific Kconfig options
Bin Meng
- [U-Boot] [PATCH v4 11/25] riscv: Enlarge the default SYS_MALLOC_F_LEN
Bin Meng
- [U-Boot] [PATCH v4 12/25] riscv: Probe cpus during boot
Bin Meng
- [U-Boot] [PATCH v4 13/25] riscv: Remove non-DM version of print_cpuinfo()
Bin Meng
- [U-Boot] [PATCH v4 14/25] riscv: Add CSR numbers
Bin Meng
- [U-Boot] [PATCH v4 15/25] riscv: Add exception codes for xcause register
Bin Meng
- [U-Boot] [PATCH v4 16/25] riscv: Update supports_extension() to use desc from cpu driver
Bin Meng
- [U-Boot] [PATCH v4 17/25] riscv: Add indirect stringification to csr_xxx ops
Bin Meng
- [U-Boot] [PATCH v4 18/25] riscv: Do some basic architecture level cpu initialization
Bin Meng
- [U-Boot] [PATCH v4 19/25] riscv: Move trap handler codes to mtrap.S
Bin Meng
- [U-Boot] [PATCH v4 20/25] riscv: Fix context restore before returning from trap handler
Bin Meng
- [U-Boot] [PATCH v4 21/25] riscv: Return to previous privilege level after trap handling
Bin Meng
- [U-Boot] [PATCH v4 22/25] riscv: Adjust the _exit_trap() position to come before handle_trap()
Bin Meng
- [U-Boot] [PATCH v4 23/25] riscv: Save boot hart id to the global data
Bin Meng
- [U-Boot] [PATCH v4 24/25] riscv: bootm: Change to use boot_hart from global data
Bin Meng
- [U-Boot] [PATCH v4 25/25] riscv: Remove ae350.dts
Bin Meng
- [U-Boot] [PATCH v2 06/20] riscv: ax25: Hide the ax25-specific Kconfig option
Bin Meng
- [U-Boot] [PATCH] poplar: fix boot failure caused by serial driver change
Bin Meng
- [U-Boot] [RFC PATCH] usb: composite: Fix max packet size for USB3.0
Bin Meng
- [U-Boot] [PATCH v4 16/25] riscv: Update supports_extension() to use desc from cpu driver
Bin Meng
- [U-Boot] [PATCH v5 00/25] riscv: Adding RISC-V CPU and timer driver
Bin Meng
- [U-Boot] [PATCH v5 01/25] riscv: add Kconfig entries for the code model
Bin Meng
- [U-Boot] [PATCH v5 02/25] dm: cpu: Add timebase frequency to the platdata
Bin Meng
- [U-Boot] [PATCH v5 03/25] riscv: qemu: Create a simple-bus driver for the soc node
Bin Meng
- [U-Boot] [PATCH v5 04/25] cpu: Add a RISC-V CPU driver
Bin Meng
- [U-Boot] [PATCH v5 05/25] timer: Add generic driver for RISC-V privileged architecture defined timer
Bin Meng
- [U-Boot] [PATCH v5 06/25] riscv: ax25: Hide the ax25-specific Kconfig option
Bin Meng
- [U-Boot] [PATCH v5 07/25] riscv: Introduce a Kconfig option for machine mode
Bin Meng
- [U-Boot] [PATCH v5 08/25] riscv: Add a SYSCON driver for SiFive's Core Local Interruptor
Bin Meng
- [U-Boot] [PATCH v5 09/25] riscv: Implement riscv_get_time() API using rdtime instruction
Bin Meng
- [U-Boot] [PATCH v5 10/25] riscv: qemu: Add platform-specific Kconfig options
Bin Meng
- [U-Boot] [PATCH v5 11/25] riscv: Enlarge the default SYS_MALLOC_F_LEN
Bin Meng
- [U-Boot] [PATCH v5 12/25] riscv: Probe cpus during boot
Bin Meng
- [U-Boot] [PATCH v5 13/25] riscv: Remove non-DM version of print_cpuinfo()
Bin Meng
- [U-Boot] [PATCH v5 14/25] riscv: Add CSR numbers
Bin Meng
- [U-Boot] [PATCH v5 15/25] riscv: Add exception codes for xcause register
Bin Meng
- [U-Boot] [PATCH v5 16/25] riscv: Update supports_extension() to use desc from cpu driver
Bin Meng
- [U-Boot] [PATCH v5 17/25] riscv: Add indirect stringification to csr_xxx ops
Bin Meng
- [U-Boot] [PATCH v5 18/25] riscv: Do some basic architecture level cpu initialization
Bin Meng
- [U-Boot] [PATCH v5 19/25] riscv: Move trap handler codes to mtrap.S
Bin Meng
- [U-Boot] [PATCH v5 20/25] riscv: Fix context restore before returning from trap handler
Bin Meng
- [U-Boot] [PATCH v5 21/25] riscv: Return to previous privilege level after trap handling
Bin Meng
- [U-Boot] [PATCH v5 22/25] riscv: Adjust the _exit_trap() position to come before handle_trap()
Bin Meng
- [U-Boot] [PATCH v5 23/25] riscv: Save boot hart id to the global data
Bin Meng
- [U-Boot] [PATCH v5 24/25] riscv: bootm: Change to use boot_hart from global data
Bin Meng
- [U-Boot] [PATCH v5 25/25] riscv: Remove ae350.dts
Bin Meng
- [U-Boot] [PATCH v2 06/20] riscv: ax25: Hide the ax25-specific Kconfig option
Bin Meng
- [U-Boot] qemu x86 ide device not probing automatically with 2018.11
Bin Meng
- [U-Boot] Bogus message about SCSI during build
Bin Meng
- [U-Boot] [PATCH v3 11/31] blk: Call part_init() in the post_probe() method
Bin Meng
- [U-Boot] [PATCH v3 11/31] blk: Call part_init() in the post_probe() method
Bin Meng
- [U-Boot] [PATCH] zynq-gem: Flush cache before handing RX packet to receive handler
Bin Meng
- [U-Boot] [PATCH] zynq-gem: Flush cache before handing RX packet to receive handler
Bin Meng
- [U-Boot] [PATCH] zynq-gem: Flush cache before handing RX packet to receive handler
Bin Meng
- [U-Boot] [PATCH] zynq-gem: Flush cache before handing RX packet to receive handler
Bin Meng
- [U-Boot] [PATCH v2] zynq-gem: Flush cache before handing RX packet to receive handler
Bin Meng
- [U-Boot] [PATCH v3] zynq-gem: Use appropriate cache flush/invalidate for RX and TX
Bin Meng
- [U-Boot] [PATCH v5 00/25] riscv: Adding RISC-V CPU and timer driver
Bin Meng
- [U-Boot] [PATCH] MAINTAINERS: update NXP i.MX mail list address
Bin Meng
- [U-Boot] [PATCH] riscv: configs: Rename ax25-ae350 defconfig
Bin Meng
- [U-Boot] [PATCH v2] riscv: configs: Rename ax25-ae350 defconfig
Bin Meng
- [U-Boot] [PATCH v4] zynq-gem: Use appropriate cache flush/invalidate for RX and TX
Bin Meng
- [U-Boot] [PATCH v4] zynq-gem: Use appropriate cache flush/invalidate for RX and TX
Bin Meng
- [U-Boot] [PATCH v5] zynq-gem: Use appropriate cache flush/invalidate for RX and TX
Bin Meng
- [U-Boot] [PATCH V2] MAINTAINERS: update NXP i.MX mail list address
Bin Meng
- [U-Boot] [PATCH v3 2/3] MAINTAINERS: Sync for ax25-ae350 rename
Bin Meng
- [U-Boot] [PATCH v3 3/3] doc: README.ae350: Sync for ax25-ae350 rename
Bin Meng
- [U-Boot] [PATCH v3 2/3] MAINTAINERS: Sync for ax25-ae350 rename
Bin Meng
- [U-Boot] [PATCH v4 1/2] riscv: configs: Rename ax25-ae350 defconfig
Bin Meng
- [U-Boot] [PATCH] fs: cbfs: remove wrong header validation
Bin Meng
- [U-Boot] [PATCH 1/3] riscv: Add asm/dma-mapping.h for DMA mappings
Bin Meng
- [U-Boot] [PATCH 2/3] net: macb: Fix clk API usage for RISC-V systems
Bin Meng
- [U-Boot] [PATCH 3/3] riscv: qemu: Imply MACB ethernet for emulation
Bin Meng
- [U-Boot] [PATCH 0/3] Ethernet support for QEMU sifive_u machine
Bin Meng
- [U-Boot] [PATCH 0/3] Ethernet support for QEMU sifive_u machine
Bin Meng
- [U-Boot] [PATCH 0/3] Ethernet support for QEMU sifive_u machine
Bin Meng
- [U-Boot] [PATCH 0/3] Ethernet support for QEMU sifive_u machine
Bin Meng
- [U-Boot] [PATCH 1/2] travis: Setup QEMU_VERSION as variable
Bin Meng
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Bin Meng
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Bin Meng
- [U-Boot] [PATCH v2] x86: tsc: Add support for native calibration of TSC freq
Bin Meng
- [U-Boot] [PATCH] riscv: bootm: Support booting VxWorks
Bin Meng
- [U-Boot] [PATCH 1/3] bootm: vxworks: Make do_bootvx_fdt() static
Bin Meng
- [U-Boot] [PATCH 2/3] bootm: vxworks: Make do_bootm_vxworks() non-static
Bin Meng
- [U-Boot] [PATCH 3/3] riscv: bootm: Support booting VxWorks
Bin Meng
- [U-Boot] [PATCH 1/4] fs: cbfs: remove wrong header validation
Bin Meng
- [U-Boot] [PATCH 2/4] fs: cbfs: Fix out of bound access during CBFS walking through
Bin Meng
- [U-Boot] [PATCH 3/4] fs: cbfs: Make all CBFS_TYPE_xxx macros consistent
Bin Meng
- [U-Boot] [PATCH 4/4] fs: cbfs: Add missing standard CBFS component types
Bin Meng
- [U-Boot] [PATCH] fs: cbfs: remove wrong header validation
Bin Meng
- [U-Boot] [PATCH] fs: cbfs: remove wrong header validation
Bin Meng
- [U-Boot] [PATCH 0/3] Ethernet support for QEMU sifive_u machine
Bin Meng
- [U-Boot] [PATCH 0/3] Ethernet support for QEMU sifive_u machine
Bin Meng
- [U-Boot] [PATCH 0/3] Ethernet support for QEMU sifive_u machine
Bin Meng
- [U-Boot] [PATCH 0/3] Ethernet support for QEMU sifive_u machine
Bin Meng
- [U-Boot] [PATCH v1 1/3] x86: edison: move CONFIG_CMD_PCI from header file to defconfig
Bin Meng
- [U-Boot] [PATCH v1 2/3] x86: edison: move CONFIG_BOOTCOMMAND from header file to defconfig
Bin Meng
- [U-Boot] [PATCH v1 3/3] x86: edison: Remove staled comments from configuration header
Bin Meng
- [U-Boot] [PATCH v1 1/3] x86: edison: move CONFIG_CMD_PCI from header file to defconfig
Bin Meng
- [U-Boot] [PATCH v1 2/3] x86: edison: move CONFIG_BOOTCOMMAND from header file to defconfig
Bin Meng
- [U-Boot] [PATCH v1 3/3] x86: edison: Remove staled comments from configuration header
Bin Meng
- [U-Boot] [PATCH 1/4] fs: cbfs: remove wrong header validation
Bin Meng
- [U-Boot] [PATCH 2/4] fs: cbfs: Fix out of bound access during CBFS walking through
Bin Meng
- [U-Boot] [PATCH 3/4] fs: cbfs: Make all CBFS_TYPE_xxx macros consistent
Bin Meng
- [U-Boot] [PATCH 4/4] fs: cbfs: Add missing standard CBFS component types
Bin Meng
- [U-Boot] Please pull u-boot-x86
Bin Meng
- [U-Boot] [PATCH 1/3] bootm: vxworks: Make do_bootvx_fdt() static
Bin Meng
- [U-Boot] [PATCH 1/6] riscv: clarify error message on undefined exceptions
Bin Meng
- [U-Boot] [PATCH 2/6] riscv: remove invalid dcache flush implementation
Bin Meng
- [U-Boot] [PATCH 3/6] riscv: remove RISC-V standalone linker script
Bin Meng
- [U-Boot] [PATCH 4/6] riscv: replace use of callee-saved register in standalone
Bin Meng
- [U-Boot] [PATCH 5/6] riscv: support standalone applications on RV64I systems
Bin Meng
- [U-Boot] [PATCH 6/6] riscv: qemu: define standalone load address
Bin Meng
- [U-Boot] [PATCH v2] x86: tsc: Add support for native calibration of TSC freq
Bernhard Messerklinger
- [U-Boot] [PATCH 2/2] mtd: Get rid of board_mtdparts_default()
Ladislav Michl
- [U-Boot] [PATCH 2/2] mtd: Get rid of board_mtdparts_default()
Ladislav Michl
- [U-Boot] [PATCH 1/2] exynos5-dt-types: add missing dtb file for Odroid HC1/HC2
Anand Moon
- [U-Boot] [PATCH] cmd: i2c: Fix help output of i2c command.
Christoph Muellner
- [U-Boot] [PATCH 0/4] rk3399: puma: Enable PWM regulator for Puma.
Christoph Muellner
- [U-Boot] [PATCH 1/4] rockchip: rk3399-puma: Cleanup vdd_log node in puma DTSI.
Christoph Muellner
- [U-Boot] [PATCH 2/4] power: regulator: Allow PWM regulator to be omitted from SPL.
Christoph Muellner
- [U-Boot] [PATCH 3/4] rockchip: defconfig: puma-rk3399: enable PWM regulator
Christoph Muellner
- [U-Boot] [PATCH 4/4] rockchip: puma-rk3399: Enable vdd-log during bootup.
Christoph Muellner
- [U-Boot] [PATCH v1] rockchip: rk3399-puma: Remove obsolete DTS node 'vcc5v0_host'.
Christoph Muellner
- [U-Boot] [PATCH v2 0/6] rk3399-puma: Enable PWM regulator for RK3399-Q7
Christoph Muellner
- [U-Boot] [PATCH v2 1/6] rockchip: rk3399-puma: Cleanup of vdd_log DTS entry.
Christoph Muellner
- [U-Boot] [PATCH v2 2/6] power: regulator: Allow PWM regulator to be omitted from SPL.
Christoph Muellner
- [U-Boot] [PATCH v2 3/6] rockchip: rk3399-puma: enable PWM regulator in Puma defconfig.
Christoph Muellner
- [U-Boot] [PATCH v2 4/6] dm: pinctrl: Add pinctrl_decode_pin_config_dm().
Christoph Muellner
- [U-Boot] [PATCH v2 5/6] rockchip: rk3399: Add improved pinctrl driver.
Christoph Muellner
- [U-Boot] [PATCH v2 6/6] rockchip: rk3399-puma: Set VDD_LOG to 950 mV.
Christoph Muellner
- [U-Boot] [PATCH v3 0/8] rk3399-puma: Enable PWM regulator for RK3399-Q7
Christoph Muellner
- [U-Boot] [PATCH v3 1/8] rockchip: rk3399-puma: Cleanup of vdd_log DTS entry.
Christoph Muellner
- [U-Boot] [PATCH v3 2/8] power: regulator: Allow PWM regulator to be omitted from SPL.
Christoph Muellner
- [U-Boot] [PATCH v3 3/8] rockchip: rk3399-puma: enable PWM regulator in Puma defconfig.
Christoph Muellner
- [U-Boot] [PATCH v3 4/8] dm: pinctrl: Add pinctrl_decode_pin_config_dm().
Christoph Muellner
- [U-Boot] [PATCH v3 5/8] rockchip: rk3399: Add improved pinctrl driver.
Christoph Muellner
- [U-Boot] [PATCH v3 6/8] rockchip: rk3399: Add Kconfig option for full pinctrl driver
Christoph Muellner
- [U-Boot] [PATCH v3 7/8] rockchip: rk3399-puma: enable full pinctrl driver in Puma defconfig.
Christoph Muellner
- [U-Boot] [PATCH v3 8/8] rockchip: rk3399-puma: Set VDD_LOG to 950 mV.
Christoph Muellner
- [U-Boot] [PATCH 4/4] rockchip: puma-rk3399: Enable vdd-log during bootup.
Christoph Müllner
- [U-Boot] [PATCH v2 4/6] dm: pinctrl: Add pinctrl_decode_pin_config_dm().
Christoph Müllner
- [U-Boot] [PATCH v2 5/6] rockchip: rk3399: Add improved pinctrl driver.
Christoph Müllner
- [U-Boot] [PATCH v3 4/8] dm: pinctrl: Add pinctrl_decode_pin_config_dm().
Christoph Müllner
- [U-Boot] [PATCH v3 5/8] rockchip: rk3399: Add improved pinctrl driver.
Christoph Müllner
- [U-Boot] [PATCH v3 5/8] rockchip: rk3399: Add improved pinctrl driver.
Christoph Müllner
- [U-Boot] boot.bin on SD Card for SAMA5D3 Xplained
Robert Nelson
- [U-Boot] [imx/next V2] tools: imx8m_image: use bash
Jon Nettleton
- [U-Boot] u-boot with no external RAM, is it possible
Michael Nickelson
- [U-Boot] [PATCH] common: fdt_support: print hexadecimal numbers in debug
Sekhar Nori
- [U-Boot] [PATCH v2] common: fdt_support: print hexadecimal numbers in debug
Sekhar Nori
- [U-Boot] [PATCH] common: fdt_support: print hexadecimal numbers in debug
Sekhar Nori
- [U-Boot] [PATCH] spl: fix build failure with !CONFIG_SPL_PCI_SUPPORT
Sekhar Nori
- [U-Boot] [PATCH] cmd: image_info: Add checking of default FIT config
Bryan O'Donoghue
- [U-Boot] [PATCH] ARM: mach-omap2: omap3: Fix GPIO clocking in SPL
Liam O'Shaughnessey
- [U-Boot] [PATCH] ARM: mach-omap2: omap3: Fix GPIO clocking in SPL
Liam O'Shaughnessey
- [U-Boot] [PATCH 0/2] net: phy: allow disabling SmartEEE for Atheros PHYs
Vladimir Oltean
- [U-Boot] [PATCH 1/2] net: phy: promote phy_{read, write}_mmd_indirect from ti.c to generic code
Vladimir Oltean
- [U-Boot] [PATCH 2/2] net: phy: at803x: Address packet drops at low traffic rate due to SmartEEE feature
Vladimir Oltean
- [U-Boot] [PATCH] rsa: read out public_exponent value based on 32-bit alignment
Ooi, Joyce
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Ooi, Joyce
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Ooi, Joyce
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Ooi, Joyce
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Ooi, Joyce
- [U-Boot] [PATCH] rsa: read out public_exponent value based on 32-bit alignment
Ooi, Joyce
- [U-Boot] [PATCH] rsa: read out public_exponent value based on 32-bit alignment
Ooi, Joyce
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Ooi, Joyce
- [U-Boot] [PATCH 1/1] tee: change return code for REE FS supplicant cmd
Igor Opaniuk
- [U-Boot] [PATCH 09/13] serial: Remove DM_FLAG_PRE_RELOC flag in various drivers
Igor Opaniuk
- [U-Boot] [PATCH] poplar: fix boot failure caused by serial driver change
Igor Opaniuk
- [U-Boot] [PATCH 1/1] avb2.0: add support for named persistent values
Igor Opaniuk
- [U-Boot] [RESEND PATCH 1/1] avb: add support for named persistent values
Igor Opaniuk
- [U-Boot] [PATCH v2 1/1] avb: add support for named persistent values
Igor Opaniuk
- [U-Boot] [PATCH v2 1/1] avb: add support for named persistent values
Igor Opaniuk
- [U-Boot] [PATCH v2 1/1] avb: add support for named persistent values
Igor Opaniuk
- [U-Boot] [PATCH v2 1/1] avb: add support for named persistent values
Igor Opaniuk
- [U-Boot] [PATCH 0/1] ARM: mvebu: Armada-38x DDR training update
Chris Packham
- [U-Boot] [PATCH v2 0/1] ARM: mvebu: Armada-38x DDR training update
Chris Packham
- [U-Boot] [PATCH v2 1/1] ARM: mvebu: a38x: sync ddr training code with mv_ddr-armada-18.09.02
Chris Packham
- [U-Boot] [PATCH] net: mvgbe: fallback phy-mode to GMII
Chris Packham
- [U-Boot] [U-Boot, PATCHv3, 2/4] dm: MIGRATION: Add migration plan for DM_USB
Chris Packham
- [U-Boot] [PATCH] ARM: mvebu: define CONFIG_BLK for db-88f6820-amc
Chris Packham
- [U-Boot] [PATCH] ARM: mvebu: sync Armada-38x dts with Linux 4.20
Chris Packham
- [U-Boot] [PATCH] ARM: mvebu: restore license information in mv_ddr_plat.{c, h}
Chris Packham
- [U-Boot] Please pull u-boot-marvell/master
Chris Packham
- [U-Boot] [PATCH v2] ARM: mvebu: sync Armada-38x dts with Linux 4.20
Chris Packham
- [U-Boot] [PATCH] ARM: mvebu: remove out of date comment
Chris Packham
- [U-Boot] buildman and "echo" output?
Chris Packham
- [U-Boot] [PATCH] Makefile: output migration warnings to stderr
Chris Packham
- [U-Boot] [RFC PATCH v1 0/7] ARM: kirkwood: migration to DM_USB
Chris Packham
- [U-Boot] [RFC PATCH v1 1/7] net: mvgbe: fallback phy-mode to GMII
Chris Packham
- [U-Boot] [RFC PATCH v1 2/7] ARM: kirkwood: add db-88f6281-bp board
Chris Packham
- [U-Boot] [RFC PATCH v1 3/7] ARM: kirkwood: rename KW_CPU_WIN_BASE to MVEBU_CPU_WIN_BASE
Chris Packham
- [U-Boot] [RFC PATCH v1 4/7] ARM: kirkwood: remove KW_DEFADR_PCI_IO_REMAP
Chris Packham
- [U-Boot] [RFC PATCH v1 5/7] ARM: kirkwood: switch to using mvebu mbus
Chris Packham
- [U-Boot] [RFC PATCH v1 6/7] ARM: kirkwood: remove kw_config_adr_windows
Chris Packham
- [U-Boot] [RFC PATCH v1 7/7] ARM: kirkwood: enable CONFIG_DM_USB on db-88f6281-bp
Chris Packham
- [U-Boot] [RFC PATCH] ARM: mvebu: add support for Allied Telesis x530
Chris Packham
- [U-Boot] [RFC PATCH] mmc: sdhci: zynqmp: Added support to read tap delay values from DT
Siva Durga Prasad Paladugu
- [U-Boot] [RFC PATCH] usb: composite: Fix max packet size for USB3.0
Siva Durga Prasad Paladugu
- [U-Boot] [PATCH] usb: composite: Fix max packet size for USB3.0
Siva Durga Prasad Paladugu
- [U-Boot] sunxi: regression in dram init for h3 board
Karl Palsson
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Karl Palsson
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Karl Palsson
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Karl Palsson
- [U-Boot] [PATCH v7 0/4] RISC-V S-mode support
Anup Patel
- [U-Boot] [PATCH v7 1/4] riscv: Add kconfig option to run U-Boot in S-mode
Anup Patel
- [U-Boot] [PATCH v7 2/4] riscv: qemu: Use different SYS_TEXT_BASE for S-mode
Anup Patel
- [U-Boot] [PATCH v7 3/4] riscv: Add S-mode defconfigs for QEMU virt machine
Anup Patel
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Anup Patel
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Anup Patel
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Anup Patel
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Anup Patel
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Anup Patel
- [U-Boot] [PATCH 00/19] riscv: Adding RISC-V CPU and timer driver
Anup Patel
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Anup Patel
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Anup Patel
- [U-Boot] [PATCH v7 4/4] RISC-V: Add S-mode timer implementation
Anup Patel
- [U-Boot] [PATCH 0/2] SiFive UART support
Anup Patel
- [U-Boot] [PATCH 1/2] drivers: serial: Add SiFive UART driver
Anup Patel
- [U-Boot] [PATCH 2/2] riscv: qemu: Enable SiFive UART driver in defconfigs
Anup Patel
- [U-Boot] [PATCH 00/19] riscv: Adding RISC-V CPU and timer driver
Anup Patel
- [U-Boot] [PATCH 1/2] drivers: serial: Add SiFive UART driver
Anup Patel
- [U-Boot] [PATCH 2/2] riscv: qemu: Enable SiFive UART driver in defconfigs
Anup Patel
- [U-Boot] [PATCH 1/2] drivers: serial: Add SiFive UART driver
Anup Patel
- [U-Boot] [PATCH v2 0/2] SiFive UART support
Anup Patel
- [U-Boot] [PATCH v2 1/2] drivers: serial: Add SiFive UART driver
Anup Patel
- [U-Boot] [PATCH v2 2/2] riscv: qemu: Imply SIFIVE_SERIAL for emulation
Anup Patel
- [U-Boot] [PATCH v2 0/2] SiFive UART support
Anup Patel
- [U-Boot] [PATCH v2 0/2] SiFive UART support
Anup Patel
- [U-Boot] [PATCH v4 00/25] riscv: Adding RISC-V CPU and timer driver
Anup Patel
- [U-Boot] [PATCH v5 00/25] riscv: Adding RISC-V CPU and timer driver
Anup Patel
- [U-Boot] [PATCH v2 0/2] SiFive UART support
Anup Patel
- [U-Boot] [PATCH v3 0/2] SiFive UART support
Anup Patel
- [U-Boot] [PATCH v3 1/2] drivers: serial: Add SiFive UART driver
Anup Patel
- [U-Boot] [PATCH v3 2/2] riscv: qemu: Imply SIFIVE_SERIAL for emulation
Anup Patel
- [U-Boot] [PATCH v2 0/2] SiFive UART support
Anup Patel
- [U-Boot] [PATCH 0/3] Ethernet support for QEMU sifive_u machine
Anup Patel
- [U-Boot] [PATCH 1/3] riscv: Add asm/dma-mapping.h for DMA mappings
Anup Patel
- [U-Boot] [PATCH 2/3] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH 3/3] riscv: qemu: Imply MACB ethernet for emulation
Anup Patel
- [U-Boot] [PATCH 0/3] Ethernet support for QEMU sifive_u machine
Anup Patel
- [U-Boot] [PATCH 0/3] Ethernet support for QEMU sifive_u machine
Anup Patel
- [U-Boot] [PATCH 0/3] Ethernet support for QEMU sifive_u machine
Anup Patel
- [U-Boot] [PATCH 1/3] riscv: Add asm/dma-mapping.h for DMA mappings
Anup Patel
- [U-Boot] [PATCH 2/3] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH v2 0/3] Ethernet support for QEMU sifive_u machine
Anup Patel
- [U-Boot] [PATCH v2 1/3] riscv: Add asm/dma-mapping.h for DMA mappings
Anup Patel
- [U-Boot] [PATCH v2 2/3] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH v2 3/3] riscv: qemu: Imply MACB ethernet for emulation
Anup Patel
- [U-Boot] [PATCH v2 0/3] Ethernet support for QEMU sifive_u machine
Anup Patel
- [U-Boot] [PATCH 1/3] riscv: Add asm/dma-mapping.h for DMA mappings
Anup Patel
- [U-Boot] [PATCH v2 2/3] net: macb: Fix clk API usage for RISC-V systems
Anup Patel
- [U-Boot] [PATCH v2 3/3] riscv: qemu: Imply MACB ethernet for emulation
Anup Patel
- [U-Boot] [PATCH 0/3] Ethernet support for QEMU sifive_u machine
Anup Patel
- [U-Boot] [PATCH 0/3] Ethernet support for QEMU sifive_u machine
Anup Patel
- [U-Boot] [PATCH 0/3] Ethernet support for QEMU sifive_u machine
Anup Patel
- [U-Boot] [PATCH 0/3] Ethernet support for QEMU sifive_u machine
Anup Patel
- [U-Boot] [PATCH] spl: fix the new position of gd and stack
Donglin Peng
- [U-Boot] Questions about the mmc_spi driver
Carl Perry
- [U-Boot] [PATCH v3 25/28] cmd: nand/sf: isolate legacy code
Thomas Petazzoni
- [U-Boot] Issue with memcpy when booting a fitImage on SPEAr600
Thomas Petazzoni
- [U-Boot] Unable to saveenv to MMC
Robin Polak
- [U-Boot] Unable to saveenv to MMC
Robin Polak
- [U-Boot] Unable to saveenv to MMC
Robin Polak
- [U-Boot] Unable to saveenv to MMC
Robin Polak
- [U-Boot] [PATCH] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Andy Pont
- [U-Boot] [PATCH 0/6] mips: mscc: Add multi-dtb support to luton+ocelot
Lars Povlsen
- [U-Boot] [PATCH 1/6] mips: luton+ocelot: Remove board-specific config options
Lars Povlsen
- [U-Boot] [PATCH 2/6] mips: mscc: Add generic PHY MIIM utility functions
Lars Povlsen
- [U-Boot] [PATCH 3/6] mips: mscc: Add generic GPIO control utility function
Lars Povlsen
- [U-Boot] [PATCH 4/6] mips: luton: DT: Add pcb090
Lars Povlsen
- [U-Boot] [PATCH 5/6] mips: luton: Add multi-dtb support
Lars Povlsen
- [U-Boot] [PATCH 6/6] mips: ocelot: Add multi-dtb support
Lars Povlsen
- [U-Boot] [PATCH v2 0/4] mips: mscc: Add multi-dtb support to luton+ocelot
Lars Povlsen
- [U-Boot] [PATCH v2 1/4] mips: mscc: Add generic PHY MIIM utility functions
Lars Povlsen
- [U-Boot] [PATCH v2 2/4] mips: mscc: Add generic GPIO control utility function
Lars Povlsen
- [U-Boot] [PATCH v2 3/4] mips: luton: DT: Add pcb090
Lars Povlsen
- [U-Boot] [PATCH v2 4/4] mips: mscc: luton+ocelot: Remove board config options, do probing
Lars Povlsen
- [U-Boot] [PATCH 0/6] mips: mscc: gpio: Add MSCC serial GPIO driver
Lars Povlsen
- [U-Boot] [PATCH 1/6] mips: mscc_sgpio: Add the MSCC serial GPIO device (SIO)
Lars Povlsen
- [U-Boot] [PATCH 2/6] mips: mscc_sgpio: Add DT bindings documentation
Lars Povlsen
- [U-Boot] [PATCH 3/6] mips: luton: DT: Enable use of serial gpio
Lars Povlsen
- [U-Boot] [PATCH 4/6] mips: luton: Enable use of serial gpio for LED
Lars Povlsen
- [U-Boot] [PATCH 5/6] mips: ocelot: DT: Enable use of serial gpio
Lars Povlsen
- [U-Boot] [PATCH 6/6] mips: ocelot: Enable use of serial gpio for LED
Lars Povlsen
- [U-Boot] [PATCH v2 0/6] mips: mscc: gpio: Add MSCC serial GPIO driver
Lars Povlsen
- [U-Boot] [PATCH v2 1/6] mips: mscc_sgpio: Add the MSCC serial GPIO device (SIO)
Lars Povlsen
- [U-Boot] [PATCH v2 2/6] mips: mscc_sgpio: Add DT bindings documentation
Lars Povlsen
- [U-Boot] [PATCH v2 3/6] mips: luton: DT: Enable use of serial gpio
Lars Povlsen
- [U-Boot] [PATCH v2 4/6] mips: luton: Enable use of serial gpio for LED
Lars Povlsen
- [U-Boot] [PATCH v2 5/6] mips: ocelot: DT: Enable use of serial gpio
Lars Povlsen
- [U-Boot] [PATCH v2 6/6] mips: ocelot: Enable use of serial gpio for LED
Lars Povlsen
- [U-Boot] [PATCH v2 6/6] arm: mvebu: helios4: Reset uSOM onboard phy during board init
Aditya Prayoga
- [U-Boot] [PATCH v2 6/6] arm: mvebu: helios4: Reset uSOM onboard phy during board init
Aditya Prayoga
- [U-Boot] [PATCH v2 6/6] arm: mvebu: helios4: Reset uSOM onboard phy during board init
Aditya Prayoga
- [U-Boot] [PATCH 1/1] net: mvneta: Add GPIO configuration support
Aditya Prayoga
- [U-Boot] [PATCH v3 0/6] Update support for Helios4 board
Aditya Prayoga
- [U-Boot] [PATCH v3 1/6] arm: mvebu: helios4: mmc: move environment before 1M
Aditya Prayoga
- [U-Boot] [PATCH v3 2/6] arm: mvebu: helios4: Enable I2C and IO Expander
Aditya Prayoga
- [U-Boot] [PATCH v3 3/6] arm: mvebu: helios4: Enable mvebu GPIO
Aditya Prayoga
- [U-Boot] [PATCH v3 4/6] arm: mvebu: helios4: Reduce U-Boot image size
Aditya Prayoga
- [U-Boot] [PATCH v3 5/6] arm: mvebu: helios4: Enable SPI flash support
Aditya Prayoga
- [U-Boot] [PATCH v3 6/6] arm: mvebu: helios4: Reset uSOM onboard phy during board init
Aditya Prayoga
- [U-Boot] [PATCH] arm: configs: helios4: Change U-Boot offset on SPI Flash
Aditya Prayoga
- [U-Boot] [PATCH] arm: ti: boot: Increase system partition size
Sam Protsenko
- [U-Boot] changing of fastboot index
Sam Protsenko
- [U-Boot] [PATCH] arm: ti: boot: Increase system partition size
Sam Protsenko
- [U-Boot] [PATCH] arm: ti: boot: Increase system partition size
Sam Protsenko
- [U-Boot] [PATCH v2 0/7] android: Implement A/B boot process
Sam Protsenko
- [U-Boot] [PATCH] sunxi: H6: DRAM: avoid memcpy() on MMIO registers
Andre Przywara
- [U-Boot] [PATCH] sunxi: update README.sunxi64
Andre Przywara
- [U-Boot] [PATCH] sunxi: H6: DRAM: avoid memcpy() on MMIO registers
Andre Przywara
- [U-Boot] [PATCH] sunxi: Allow booting from 128KB SD/eMMC offset
Andre Przywara
- [U-Boot] [PATCH 0/2] mmc: Fix partition table init regression
Andre Przywara
- [U-Boot] [PATCH 1/2] sunxi: drop default SPL_LIBDISK_SUPPORT enablement
Andre Przywara
- [U-Boot] [PATCH 2/2] mmc: bring back partition init for non-DM MMC drivers
Andre Przywara
- [U-Boot] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Andre Przywara
- [U-Boot] [PATCH 0/3] tools: mkimage: Add Allwinner eGON support
Andre Przywara
- [U-Boot] [PATCH 1/3] tools: mkimage: Add missing names for imx8mimage and loadables
Andre Przywara
- [U-Boot] [PATCH 2/3] tools: mkimage: Add Allwinner eGON support
Andre Przywara
- [U-Boot] [PATCH 3/3] sunxi: Use mkimage -T sunxi_egon for SPL boot image generation
Andre Przywara
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
André Przywara
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
André Przywara
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
André Przywara
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
André Przywara
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
André Przywara
- [U-Boot] [PATCH] QE: ls1043a: modify CONFIG_SYS_QE_FW_ADDR to (512*4A00) in SD Card
Zhao Qiang
- [U-Boot] [PATCH] configs: Move CONFIG_SPI_FLASH into defconfigs
Vignesh R
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [RFC PATCH v2 01/11] spi: spi-mem: Allow use of spi_mem_exec_op for all SPI modes
Vignesh R
- [U-Boot] [RFC PATCH v2 02/11] spi-mem: Claim SPI bus before spi mem access
Vignesh R
- [U-Boot] [RFC PATCH v2 03/11] spi: Add non DM version of SPI_MEM
Vignesh R
- [U-Boot] [RFC PATCH v2 04/11] sh: bitops: add hweight*() macros
Vignesh R
- [U-Boot] [RFC PATCH v2 05/11] mtd: spi: Port SPI NOR framework from Linux
Vignesh R
- [U-Boot] [RFC PATCH v2 06/11] mtd spi: Switch to new SPI NOR framework
Vignesh R
- [U-Boot] [RFC PATCH v2 07/11] mtd: spi: Remove unused files
Vignesh R
- [U-Boot] [RFC PATCH v2 08/11] mtd: spi: Add lightweight SPI flash stack for SPL
Vignesh R
- [U-Boot] [RFC PATCH v2 09/11] sf_mtd: Simply mtd operations
Vignesh R
- [U-Boot] [RFC PATCH v2 10/11] taurus_defconfig: Enable simple malloc in SPL
Vignesh R
- [U-Boot] [RFC PATCH v2 11/11] axm_defconfig: Enable simple malloc in SPL
Vignesh R
- [U-Boot] [PATCH v3 07/28] mtd: ensure MTD is compiled when there is a SPI NOR flash using MTD
Vignesh R
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [RFC PATCH v2 09/11] sf_mtd: Simply mtd operations
Vignesh R
- [U-Boot] [RFC PATCH v2 08/11] mtd: spi: Add lightweight SPI flash stack for SPL
Vignesh R
- [U-Boot] [RFC PATCH v2 06/11] mtd spi: Switch to new SPI NOR framework
Vignesh R
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH v3 13/28] mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected
Vignesh R
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH 00/16] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH 01/16] spi: spi-mem: Allow use of spi_mem_exec_op for all SPI modes
Vignesh R
- [U-Boot] [PATCH 02/16] spi-mem: Claim SPI bus before spi mem access
Vignesh R
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Vignesh R
- [U-Boot] [PATCH 04/16] sh: bitops: add hweight*() macros
Vignesh R
- [U-Boot] [PATCH 05/16] mtd: spi: Port SPI NOR framework from Linux
Vignesh R
- [U-Boot] [PATCH 06/16] mtd: spi: Switch to new SPI NOR framework
Vignesh R
- [U-Boot] [PATCH 07/16] mtd: spi: Remove unused files
Vignesh R
- [U-Boot] [PATCH 08/16] mtd: spi: Add lightweight SPI flash stack for SPL
Vignesh R
- [U-Boot] [PATCH 09/16] sf_mtd: Simply mtd operations
Vignesh R
- [U-Boot] [PATCH 10/16] configs: Get rid of SPI_FLASH_BAR
Vignesh R
- [U-Boot] [PATCH 11/16] configs: Remove SF_DUAL_FLASH
Vignesh R
- [U-Boot] [PATCH 12/16] axm_defconfig: Enable simple malloc in SPL
Vignesh R
- [U-Boot] [PATCH 13/16] taurus_defconfig: Enable simple malloc in SPL
Vignesh R
- [U-Boot] [PATCH 14/16] da850_am18xxevm: Enable tiny printf
Vignesh R
- [U-Boot] [PATCH 15/16] turris_omnia_defconfig: Enable tiny printf
Vignesh R
- [U-Boot] [PATCH 16/16] MAINTAINERS: Add an entry for SPI NOR
Vignesh R
- [U-Boot] [PATCH 09/16] sf_mtd: Simply mtd operations
Vignesh R
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Vignesh R
- [U-Boot] [PATCH 07/16] mtd: spi: Remove unused files
Vignesh R
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Vignesh R
- [U-Boot] [PATCH 10/16] configs: Get rid of SPI_FLASH_BAR
Vignesh R
- [U-Boot] [PATCH 05/16] mtd: spi: Port SPI NOR framework from Linux
Vignesh R
- [U-Boot] [PATCH 16/16] MAINTAINERS: Add an entry for SPI NOR
Vignesh R
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Vignesh R
- [U-Boot] [PATCH 00/16] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH 00/16] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH 00/16] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH 00/16] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH 00/16] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [RFC PATCH] bitops: Fix GENMASK definition for Sandbox
Vignesh R
- [U-Boot] [PATCH 00/16] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH v2 1/2] mtd/spi: Add JEDEC SFDP support in SPI framework
Vignesh R
- [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH v2 01/11] spi-mem: Claim SPI bus before spi mem access
Vignesh R
- [U-Boot] [PATCH v2 02/11] spi: Add non DM version of SPI_MEM
Vignesh R
- [U-Boot] [PATCH v2 03/11] sh: bitops: add hweight*() macros
Vignesh R
- [U-Boot] [PATCH v2 04/11] mtd: spi: Port SPI NOR framework from Linux
Vignesh R
- [U-Boot] [PATCH v2 05/11] mtd: spi: Switch to new SPI NOR framework
Vignesh R
- [U-Boot] [PATCH v2 06/11] mtd: spi: Remove unused files
Vignesh R
- [U-Boot] [PATCH v2 07/11] mtd: spi: Add lightweight SPI flash stack for SPL
Vignesh R
- [U-Boot] [PATCH v2 08/11] configs: Enable SPI_FLASH_TINY for resource constrained boards
Vignesh R
- [U-Boot] [PATCH v2 09/11] configs: Remove SF_DUAL_FLASH
Vignesh R
- [U-Boot] [PATCH v2 10/11] configs: Don't use SPI_FLASH_BAR as default
Vignesh R
- [U-Boot] [PATCH v2 11/11] MAINTAINERS: Add an entry for SPI NOR
Vignesh R
- [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Vignesh R
- [U-Boot] [PATCH] poplar: add a co-maintainer for poplar board
Jorge Ramirez
- [U-Boot] [PATCH] MAINTAINERS: board: qcom: db820c: update email.
Jorge Ramirez-Ortiz
- [U-Boot] [PATCH v2 18/24] mtd: rawnand: compile-in the NAND core
Miquel Raynal
- [U-Boot] [PATCH v2 22/24] cmd: make all MTD commands depend on MTD
Miquel Raynal
- [U-Boot] [PATCH v2 07/24] mtd: ensure MTD is compiled when there is a SPI NOR flash
Miquel Raynal
- [U-Boot] [PATCH v2 24/24] mtd: drop CONFIG_MTD_PARTITIONS
Miquel Raynal
- [U-Boot] [PATCH v3 00/28] MTD defconfigs/Kconfigs/Makefiles heavy cleanup
Miquel Raynal
- [U-Boot] [PATCH v3 01/28] Makefile: move MTD-related lines in coherent Makefiles
Miquel Raynal
- [U-Boot] [PATCH v3 02/28] mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND
Miquel Raynal
- [U-Boot] [PATCH v3 03/28] mtd: rename CONFIG_MTD -> CONFIG_DM_MTD
Miquel Raynal
- [U-Boot] [PATCH v3 04/28] mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTD
Miquel Raynal
- [U-Boot] [PATCH v3 05/28] mtd: ensure MTD is compiled when there is a NOR flash
Miquel Raynal
- [U-Boot] [PATCH v3 06/28] mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flash
Miquel Raynal
- [U-Boot] [PATCH v3 07/28] mtd: ensure MTD is compiled when there is a SPI NOR flash using MTD
Miquel Raynal
- [U-Boot] [PATCH v3 08/28] mtd: ensure UBI is compiled when using fastmap
Miquel Raynal
- [U-Boot] [PATCH v3 09/28] mtd: ensure MTD is compiled when UBI is used
Miquel Raynal
- [U-Boot] [PATCH v3 10/28] mtd: ensure UBI is compiled when CMD_UBI is selected
Miquel Raynal
- [U-Boot] [PATCH v3 11/28] mtd: ensure UBI is compiled when ENV_IS_IN_UBI is selected
Miquel Raynal
- [U-Boot] [PATCH v3 12/28] mtd: ensure MTD_RAW_NAND is compiled when ENV_IS_IN_NAND is selected
Miquel Raynal
- [U-Boot] [PATCH v3 13/28] mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected
Miquel Raynal
- [U-Boot] [PATCH v3 14/28] mtd: ensure CMD_NAND is compiled when its options are selected
Miquel Raynal
- [U-Boot] [PATCH v3 15/28] mtd: ensure MTD is compiled when CMD_MTDPARTS is selected
Miquel Raynal
- [U-Boot] [PATCH v3 16/28] configs: move CONFIG_MTD in defconfigs when set in arch includes
Miquel Raynal
- [U-Boot] [PATCH v3 17/28] configs: remove raw NAND core from k2g defconfigs
Miquel Raynal
- [U-Boot] [PATCH v3 18/28] configs: remove MTD support from bcm11130 and M54418TWR defconfigs
Miquel Raynal
- [U-Boot] [PATCH v3 19/28] mtd: nand: add includes in NAND core to avoid warnings
Miquel Raynal
- [U-Boot] [PATCH v3 20/28] dfu: add dependency on the NAND core
Miquel Raynal
- [U-Boot] [PATCH v3 21/28] mtd: nor: NOR flashes depend on MTD
Miquel Raynal
- [U-Boot] [PATCH v3 22/28] mtd: nand: remove dependency on commands in Kconfig
Miquel Raynal
- [U-Boot] [PATCH v3 23/28] mtd: ubi: remove dependency on command in Kconfig
Miquel Raynal
- [U-Boot] [PATCH v3 24/28] cmd: mtdparts: show Kconfig options only if the command is selected
Miquel Raynal
- [U-Boot] [PATCH v3 25/28] cmd: nand/sf: isolate legacy code
Miquel Raynal
- [U-Boot] [PATCH v3 26/28] cmd: make MTD commands depend on MTD
Miquel Raynal
- [U-Boot] [PATCH v3 27/28] mtd: simplify Makefile
Miquel Raynal
- [U-Boot] [PATCH v3 28/28] mtd: properly handle SPL kbuild lines
Miquel Raynal
- [U-Boot] [PATCH v3 07/28] mtd: ensure MTD is compiled when there is a SPI NOR flash using MTD
Miquel Raynal
- [U-Boot] [RFC PATCH v2 09/11] sf_mtd: Simply mtd operations
Miquel Raynal
- [U-Boot] [PATCH v3 26/28] cmd: make MTD commands depend on MTD
Miquel Raynal
- [U-Boot] [PATCH v3 16/28] configs: move CONFIG_MTD in defconfigs when set in arch includes
Miquel Raynal
- [U-Boot] [PATCH v3 17/28] configs: remove raw NAND core from k2g defconfigs
Miquel Raynal
- [U-Boot] [PATCH v3 25/28] cmd: nand/sf: isolate legacy code
Miquel Raynal
- [U-Boot] [PATCH v3 21/28] mtd: nor: NOR flashes depend on MTD
Miquel Raynal
- [U-Boot] [PATCH v3 16/28] configs: move CONFIG_MTD in defconfigs when set in arch includes
Miquel Raynal
- [U-Boot] [PATCH v3 13/28] mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected
Miquel Raynal
- [U-Boot] [PATCH v3 13/28] mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected
Miquel Raynal
- [U-Boot] [PATCH v1] mtd: nand: raw: allow to disable unneeded ECC layouts
Miquel Raynal
- [U-Boot] [PATCH v1] mtd: nand: raw: allow to disable unneeded ECC layouts
Miquel Raynal
- [U-Boot] [PATCH v3 13/28] mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected
Miquel Raynal
- [U-Boot] [PATCH v4 00/25] MTD defconfigs/Kconfigs/Makefiles heavy cleanup
Miquel Raynal
- [U-Boot] [PATCH v4 01/25] mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NAND
Miquel Raynal
- [U-Boot] [PATCH v4 02/25] mtd: rename CONFIG_MTD -> CONFIG_DM_MTD
Miquel Raynal
- [U-Boot] [PATCH v4 03/25] mtd: rename CONFIG_MTD_DEVICE -> CONFIG_MTD
Miquel Raynal
- [U-Boot] [PATCH v4 04/25] mtd: ensure MTD is compiled when there is a NOR flash
Miquel Raynal
- [U-Boot] [PATCH v4 05/25] mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flash
Miquel Raynal
- [U-Boot] [PATCH v4 06/25] mtd: ensure MTD is compiled when there is a SPI NOR flash using MTD
Miquel Raynal
- [U-Boot] [PATCH v4 07/25] mtd: ensure UBI is compiled when using fastmap
Miquel Raynal
- [U-Boot] [PATCH v4 08/25] mtd: ensure MTD is compiled when UBI is used
Miquel Raynal
- [U-Boot] [PATCH v4 09/25] mtd: ensure UBI is compiled when CMD_UBI is selected
Miquel Raynal
- [U-Boot] [PATCH v4 10/25] mtd: ensure UBI is compiled when ENV_IS_IN_UBI is selected
Miquel Raynal
- [U-Boot] [PATCH v4 11/25] mtd: ensure MTD_RAW_NAND is compiled when ENV_IS_IN_NAND is selected
Miquel Raynal
- [U-Boot] [PATCH v4 12/25] mtd: ensure MTD and NOR drivers are compiled with ENV_IS_IN_FLASH
Miquel Raynal
- [U-Boot] [PATCH v4 13/25] mtd: ensure CMD_NAND is compiled when its options are selected
Miquel Raynal
- [U-Boot] [PATCH v4 14/25] mtd: ensure MTD is compiled when CMD_MTDPARTS is selected
Miquel Raynal
- [U-Boot] [PATCH v4 15/25] configs: move CONFIG_MTD in defconfigs when set in arch includes
Miquel Raynal
- [U-Boot] [PATCH v4 16/25] configs: remove raw NAND core from k2g defconfigs
Miquel Raynal
- [U-Boot] [PATCH v4 17/25] configs: remove MTD support from bcm11130 and M54418TWR defconfigs
Miquel Raynal
- [U-Boot] [PATCH v4 18/25] mtd: nand: add includes in NAND core to avoid warnings
Miquel Raynal
- [U-Boot] [PATCH v4 19/25] dfu: add dependency on the raw NAND core
Miquel Raynal
- [U-Boot] [PATCH v4 20/25] mtd: nor: NOR flashes depend on MTD
Miquel Raynal
- [U-Boot] [PATCH v4 21/25] mtd: spi: SPI_FLASH_MTD depends on MTD
Miquel Raynal
- [U-Boot] [PATCH v4 22/25] cmd: mtdparts: Kconfig: join mtdparts command entry with its options
Miquel Raynal
- [U-Boot] [PATCH v4 23/25] cmd: nand/sf: isolate legacy code
Miquel Raynal
- [U-Boot] [PATCH v4 24/25] cmd: make MTD commands depend on MTD
Miquel Raynal
- [U-Boot] [PATCH v4 25/25] mtd: Makefile: deep cleanup
Miquel Raynal
- [U-Boot] [PATCH v4 12/25] mtd: ensure MTD and NOR drivers are compiled with ENV_IS_IN_FLASH
Miquel Raynal
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Miquel Raynal
- [U-Boot] [PATCH v4 12/25] mtd: ensure MTD and NOR drivers are compiled with ENV_IS_IN_FLASH
Miquel Raynal
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Miquel Raynal
- [U-Boot] [PATCH] board: ge: Use correct vpd_reader callback signature
Sebastian Reichel
- [U-Boot] [RFC PATCH] tools: add a generic config for native tools building
Tom Rini
- [U-Boot] [GIT PULL] u-boot-mips
Tom Rini
- [U-Boot] Please pull u-boot-dm (take 2)
Tom Rini
- [U-Boot] Please pull u-boot-rockchip
Tom Rini
- [U-Boot] [RFC] Monthly developer call?
Tom Rini
- [U-Boot] Please pull ARC changes
Tom Rini
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20181203
Tom Rini
- [U-Boot] [RESEND][PATCH] power: regulator: denied disable on always-on regulator
Tom Rini
- [U-Boot] Re : Re: [PATCH] exynos: imply SYS_THUMB_BUILD
Tom Rini
- [U-Boot] [PATCH] Revert "serial: ns16550: fix debug uart putc called before init"
Tom Rini
- [U-Boot] [U-Boot, v2, 1/4] arm: baltos: move the board to CONFIG_BLK
Tom Rini
- [U-Boot] [U-Boot,v2,2/4] arm: baltos: remove unused header
Tom Rini
- [U-Boot] [U-Boot, v2, 3/4] arm: baltos: move CONFIG_SYS_NAND_U_BOOT_OFFS to defconfig
Tom Rini
- [U-Boot] [U-Boot, v2, 4/4] arm: baltos: migrate Ethernet PHYs configuration to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v1] eeprom: Add device model based I2C support to eeprom command
Tom Rini
- [U-Boot] [U-Boot, v2] Kconfig: Migrate CONFIG_RTC_M41T62 define to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v2, 2/4] rtc: m41t62: Break i2c_write() arguments to fix checkpatch warning
Tom Rini
- [U-Boot] [U-Boot, v2, 3/4] rtc: m41t62: Extract common RTC handling code to facilitate DM conversion
Tom Rini
- [U-Boot] [U-Boot, v2, 4/4] rtc: m41t62: Convert the RTC driver to support the driver model (DM)
Tom Rini
- [U-Boot] [U-Boot, V4, 1/7] rsa: use new openssl API to create signature
Tom Rini
- [U-Boot] [U-Boot,V4,2/7] rsa: add a structure for the padding
Tom Rini
- [U-Boot] [U-Boot,V4,3/7] rsa: add support of padding pss
Tom Rini
- [U-Boot] [U-Boot, V4, 4/7] doc: uImage.FIT: signature.txt: add option padding
Tom Rini
- [U-Boot] [U-Boot, V4, 5/7] configs: sandbox: enable padding pss for rsa signature
Tom Rini
- [U-Boot] [U-Boot, V4, 6/7] test: vboot: add padding pss for rsa signature
Tom Rini
- [U-Boot] [U-Boot,V4,7/7] test: vboot: clean its file
Tom Rini
- [U-Boot] [U-Boot,v2,1/9] powerpc, mpc8xx: clear top of stack
Tom Rini
- [U-Boot] [U-Boot, v2, 2/9] board: MCR3000: Activate CONFIG_DM and CONFIG_OF_CONTROL
Tom Rini
- [U-Boot] [U-Boot, v2, 3/9] drivers: watchdog: add a DM driver for the MPC8xx watchdog
Tom Rini
- [U-Boot] [U-Boot,v2,4/9] board: MCR3000: use new DM watchdog
Tom Rini
- [U-Boot] [U-Boot,v2,5/9] drivers: serial: migrate mpc8xx to DM
Tom Rini
- [U-Boot] [U-Boot,v2,6/9] board: MCR3000: migrate to DM_SERIAL
Tom Rini
- [U-Boot] [U-Boot, v2, 7/9] drivers: serial: get rid of non DM mpc8xx driver
Tom Rini
- [U-Boot] [U-Boot,v2,8/9] board_r: fix build with DM_SPI
Tom Rini
- [U-Boot] [U-Boot,v2,9/9] spi, mpc8xx: migrate to DM_SPI
Tom Rini
- [U-Boot] [PULL] u-boot-sh/master
Tom Rini
- [U-Boot] [PULL] efi patch queue 2018-12-03
Tom Rini
- [U-Boot] [PULL] rpi patch queue 2018-12-03
Tom Rini
- [U-Boot] [GIT PULL] Xilinx patches for v2019.01
Tom Rini
- [U-Boot] [U-Boot, PATCHv3, 1/4] dm: MIGRATION: Add migration plan for DM_MMC
Tom Rini
- [U-Boot] [U-Boot, PATCHv3, 2/4] dm: MIGRATION: Add migration plan for DM_USB
Tom Rini
- [U-Boot] [U-Boot, PATCHv3, 3/4] dm: MIGRATION: Add migration plan for CONFIG_SATA
Tom Rini
- [U-Boot] [U-Boot, PATCHv3, 4/4] dm: MIGRATION: Update migration plan for BLK
Tom Rini
- [U-Boot] MAINTAINERS: board: qcom: db820c: update email.
Tom Rini
- [U-Boot] Revert "serial: ns16550: fix debug uart putc called before init"
Tom Rini
- [U-Boot] [ANN] U-Boot v2019.01-rc1 released
Tom Rini
- [U-Boot] [PATCH v2 2/6] board: ks2_evm: Enable the USB clocks if DM_USB is used
Tom Rini
- [U-Boot] [PATCH v2 3/6] ARM: dts: k2g-evm: enable USB0 and USB1
Tom Rini
- [U-Boot] [PATCH v2 6/6] configs: k2g_evm: Enable DFU on K2G EVM
Tom Rini
- [U-Boot] [PATCH v2 14/14] configs: am335x_boneblack_vboot: enable DM_USB and RNDIS boot in SPl
Tom Rini
- [U-Boot] [PULL] u-boot-sh/master
Tom Rini
- [U-Boot] [U-Boot, PATCHv3, 2/4] dm: MIGRATION: Add migration plan for DM_USB
Tom Rini
- [U-Boot] [PATCH] blk: Rework guard around part_init call
Tom Rini
- [U-Boot] [ANN] U-Boot v2019.01-rc1 released
Tom Rini
- [U-Boot] [PATCH] fdt: Add warning about CONFIG_OF_EMBED
Tom Rini
- [U-Boot] Please pull u-boot-video
Tom Rini
- [U-Boot] Please pull u-boot-riscv
Tom Rini
- [U-Boot] [PATCH 2/3] buildman: Add support for building with clang
Tom Rini
- [U-Boot] [PATCH 3/3] travis: Use buildman for building with clang
Tom Rini
- [U-Boot] [PATCH] arm: dts: am33xx: Sync dts with Linux 4.20.0
Tom Rini
- [U-Boot] [PATCH] fdt: Add warning about CONFIG_OF_EMBED
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [PATCH v1] fs: fat: dynamically allocate memory for temporary buffer
Tom Rini
- [U-Boot] [PATCH v3 0/4] Add Rock960 and Ficus 96Board support
Tom Rini
- [U-Boot] [PATCH v3 13/28] mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected
Tom Rini
- [U-Boot] [PATCH v1] fs: fat: dynamically allocate memory for temporary buffer
Tom Rini
- [U-Boot] [PATCH v3 0/4] Add Rock960 and Ficus 96Board support
Tom Rini
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Tom Rini
- [U-Boot] [PATCH] arm: mx5: Enable WDT and bootcounter on M53Menlo
Tom Rini
- [U-Boot] [PATCH] travis: Add check for configs without MAINTAINERS entries
Tom Rini
- [U-Boot] [PATCH] defconfigs: am335x_hs_evm: Sync HS and non-HS defconfigs
Tom Rini
- [U-Boot] [PATCH v2 1/7] spl: Kconfig: Drop the _SUPPORT postfix from SPL_DFU
Tom Rini
- [U-Boot] [PATCH v2 2/7] dfu: Make DFU support more SPL friendly
Tom Rini
- [U-Boot] [PATCH v2 3/7] dfu: Remove dependency on HUSH parser in SPL
Tom Rini
- [U-Boot] [PATCH v2 4/7] ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry point
Tom Rini
- [U-Boot] [PATCH v2 5/7] defconfigs: Add config for DRA7xx High Security EVM with USB Boot support
Tom Rini
- [U-Boot] [PATCH v2 6/7] defconfigs: Add config for AM57xx High Security EVM with USB/UART Boot support
Tom Rini
- [U-Boot] [PATCH v2 7/7] doc: ti-secure: Add ULO info for AM57xx/DRA7xx secure devices from TI
Tom Rini
- [U-Boot] Please pull u-boot-rockchip
Tom Rini
- [U-Boot] [PATCH] spl: fix build failure with !CONFIG_SPL_PCI_SUPPORT
Tom Rini
- [U-Boot] [PATCH v2] common: fdt_support: print hexadecimal numbers in debug
Tom Rini
- [U-Boot] [U-Boot, PATCHv3, 2/4] dm: MIGRATION: Add migration plan for DM_USB
Tom Rini
- [U-Boot] [PATCH] arm: mx5: Enable WDT and bootcounter on M53Menlo
Tom Rini
- [U-Boot] [PATCH v3 13/28] mtd: ensure MTD is compiled when ENV_IS_IN_FLASH is selected
Tom Rini
- [U-Boot] [PATCH v2] rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node
Tom Rini
- [U-Boot] [RESEND PATCH v3 04/19] configs: am335x: am57x: dra7x: Enable CONFIG_SPL_DM_SEQ_ALIAS
Tom Rini
- [U-Boot] [RESEND PATCH v3 07/19] am335x: Register the I2C controllers if DM_I2C is used.
Tom Rini
- [U-Boot] [RESEND PATCH v3 01/19] cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT
Tom Rini
- [U-Boot] [RESEND PATCH v3 08/19] dts: am43x: omap5: Add node for I2C in SPL
Tom Rini
- [U-Boot] [RESEND PATCH v3 05/19] i2c: omap24xx_i2c: Move away from SoC specific headers for reg offset
Tom Rini
- [U-Boot] [RESEND PATCH v3 06/19] i2c: omap24xx_i2c: Use platdata to probe the device
Tom Rini
- [U-Boot] [RESEND PATCH v3 10/19] power: make most tps drivers and the twl4030 driver compatible with DM_I2C
Tom Rini
- [U-Boot] [RESEND PATCH v3 09/19] omap: detect the board after DM is available
Tom Rini
- [U-Boot] [RESEND PATCH v3 11/19] ti: common: board_detect: Allow DM I2C without CONFIG_DM_I2C_COMPAT
Tom Rini
- [U-Boot] [RESEND PATCH v3 14/19] am57xx: remove non-DM I2C code
Tom Rini
- [U-Boot] [RESEND PATCH v3 13/19] ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL
Tom Rini
- [U-Boot] [RESEND PATCH v3 15/19] configs: dra7xx-evm: increase the size of the malloc's pool before relocation
Tom Rini
- [U-Boot] [RESEND PATCH v3 17/19] drivers: core: Add the option SPL_DM_DEVICE_REMOVE to the Kconfig
Tom Rini
- [U-Boot] [RESEND PATCH v3 19/19] dra7: Allow selecting a new dtb after board detection.
Tom Rini
- [U-Boot] [RESEND PATCH v3 00/19] DM_I2C_COMPAT removal for all ti platforms
Tom Rini
- [U-Boot] w1: fix occasional enumeration failure
Tom Rini
- [U-Boot] main: Drop more #ifdefs
Tom Rini
- [U-Boot] configs: stm32f746-disco: Fix stm32f746-disco boot
Tom Rini
- [U-Boot] fs: check FAT cluster size
Tom Rini
- [U-Boot] fs: fix FAT name extraction
Tom Rini
- [U-Boot] clk: Allow clock defaults to be set during re-reloc state for SPL only
Tom Rini
- [U-Boot] board: ti: ks2_evm: Over ride spl_get_load_buffer function
Tom Rini
- [U-Boot] [U-Boot,v5,1/4] dm: Add Hardware Spinlock class
Tom Rini
- [U-Boot] [U-Boot, v5, 2/4] clk: stm32: add hardware spinlock clock
Tom Rini
- [U-Boot] [U-Boot, v5, 3/4] hwspinlock: add stm32 hardware spinlock support
Tom Rini
- [U-Boot] [U-Boot, v5, 4/4] pinctrl: stm32: make pinctrl use hwspinlock
Tom Rini
- [U-Boot] [U-Boot, v2] ARM: at91: lds: add test for SPL binary size and bss size
Tom Rini
- [U-Boot] configs: am335x_hs_evm_uart: Add YMODEM SPL support for UART boot
Tom Rini
- [U-Boot] [U-Boot,v9,1/3] dma: move dma_ops to dma-uclass.h
Tom Rini
- [U-Boot] [U-Boot,v9,2/3] dma: add channels support
Tom Rini
- [U-Boot] [U-Boot,v9,3/3] test: dma: add dma-uclass test
Tom Rini
- [U-Boot] dts: am335x-pdu001: Fix polarity of card detection input
Tom Rini
- [U-Boot] arm: am335x-pdu001: Enable CONFIG_BLK and CONFIG_DM_MMC
Tom Rini
- [U-Boot] [U-Boot, v2, 1/3] serial: bcm6345: switch to raw I/O functions
Tom Rini
- [U-Boot] [U-Boot, v2, 2/3] arm: implement {in, out}_{16, 32} and {clr, set, clrset}bits_{16, 32}
Tom Rini
- [U-Boot] [U-Boot, v2, 3/3] serial: bcm6858: remove driver and switch to bcm6345
Tom Rini
- [U-Boot] [U-Boot, 1/5] pinctrl: stm32: Move gpio_dev list filling outside probe()
Tom Rini
- [U-Boot] [U-Boot, 2/5] gpio: stm32f7: Add gpio bank holes management
Tom Rini
- [U-Boot] [U-Boot, 3/5] gpio: stm32f7: Move STM32_GPIOS_PER_BANK into gpio.h
Tom Rini
- [U-Boot] [U-Boot,4/5] gpio: stm32f7: Remove CONFIG_CLK flag.
Tom Rini
- [U-Boot] [U-Boot, 5/5] pinctrl: stm32: Update stm32_pinctrl_get_gpio_dev()
Tom Rini
- [U-Boot] ensure active menuitem is inside menu
Tom Rini
- [U-Boot] ARM: DTS: Resync am3517-evm.dts with Linux 4.20
Tom Rini
- [U-Boot] travis: Bump ARC tools to arc-2018.09
Tom Rini
- [U-Boot] serial: omap: Add code for early debugging
Tom Rini
- [U-Boot] ARM: DTS: Resync LogicPD SOM-LV with Linux 4.20
Tom Rini
- [U-Boot] ARM: DTS: Resync LogicPD-Torpedo-37xx-devkit with Linux 4.20
Tom Rini
- [U-Boot] [U-Boot,1/3] ARM: DTS: da850: Sync from Linux 4.20
Tom Rini
- [U-Boot] [U-Boot, 2/3] ARM: dts: da850-lcdk: Sync from Linux 4.20
Tom Rini
- [U-Boot] [U-Boot, 3/3] ARM: DTS: da850-evm: Re-sync da850-evm.dts from Linux 4.20
Tom Rini
- [U-Boot] [U-Boot,RFC] spl/tpl: change banner into upper case
Tom Rini
- [U-Boot] arm: dts: am33xx: Sync dts with Linux 4.20.0
Tom Rini
- [U-Boot] [PATCHv2 1/3] cmd: Move the "dm" command from test/dm/ to cmd/
Tom Rini
- [U-Boot] [PATCHv2 2/3] test: Only descend into test/ when CONFIG_UNIT_TEST is enabled
Tom Rini
- [U-Boot] [PATCHv2 3/3] tools: add a generic config for native tools building
Tom Rini
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20181207
Tom Rini
- [U-Boot] Pull request: u-boot-sunxi/master
Tom Rini
- [U-Boot] New item at list end for backwards compatibility
Tom Rini
- [U-Boot] [U-Boot,1/2] lib: merge CRC16-CCITT into u-boot/crc.h
Tom Rini
- [U-Boot] [U-Boot, 2/2] Roll CRC16-CCITT into the hash infrastructure
Tom Rini
- [U-Boot] [PATCH v4 00/11] mtd/sf: Various fixes
Tom Rini
- [U-Boot] [PATCH] ARM: mvebu: restore license information in mv_ddr_plat.{c, h}
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] ARM: rockchip: rv1108: Fix booting with initramfs
Tom Rini
- [U-Boot] ARM: rockchip: rv1108: Fix booting with initramfs
Tom Rini
- [U-Boot] ARM: rockchip: rv1108: Fix booting with initramfs
Tom Rini
- [U-Boot] [PATCH] drivers: block: Allow to cache 4K blocks by default
Tom Rini
- [U-Boot] [PATCH v3 2/2] core: ofnode: Add ofnode_get_addr_size_index
Tom Rini
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Tom Rini
- [U-Boot] Please pull u-boot-x86
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PULL] u-boot-socfpga/master
Tom Rini
- [U-Boot] [PULL] u-boot-sh/master
Tom Rini
- [U-Boot] Please pull from u-boot-i2c
Tom Rini
- [U-Boot] [PATCH v4 12/25] mtd: ensure MTD and NOR drivers are compiled with ENV_IS_IN_FLASH
Tom Rini
- [U-Boot] [PATCH v2] rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node
Tom Rini
- [U-Boot] [BUG] ut overlay fails with v2018.03 and later on qemu-arm64_defconfig
Tom Rini
- [U-Boot] CONFIG_CMD_SETEXPR disabled in many defconfigs
Tom Rini
- [U-Boot] [PATCH 0/6] Add support for MIPS Creator CI20
Tom Rini
- [U-Boot] [PATCH 0/6] Add support for MIPS Creator CI20
Tom Rini
- [U-Boot] [PATCH 0/6] Add support for MIPS Creator CI20
Tom Rini
- [U-Boot] Port old board to Kconfig
Tom Rini
- [U-Boot] Please pull u-boot-rockchip/master (for-master-20181210)
Tom Rini
- [U-Boot] [GIT PULL] u-boot-mips
Tom Rini
- [U-Boot] Please pull fsl-qoriq master
Tom Rini
- [U-Boot] travis: Add check for configs without MAINTAINERS entries
Tom Rini
- [U-Boot] [PATCH v5 0/9] Fix CVE-2018-18440 and CVE-2018-18439
Tom Rini
- [U-Boot] policy regarding unused code
Tom Rini
- [U-Boot] policy regarding unused code
Tom Rini
- [U-Boot] [PATCH v5 0/9] Fix CVE-2018-18440 and CVE-2018-18439
Tom Rini
- [U-Boot] [PATCH v2 0/6] Add support for MIPS Creator CI20
Tom Rini
- [U-Boot] [PATCH 05/16] mtd: spi: Port SPI NOR framework from Linux
Tom Rini
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Tom Rini
- [U-Boot] [U-Boot,v2] qemu-arm: Enable VirtIO distro target
Tom Rini
- [U-Boot] qemu-arm: Add persistent environment support
Tom Rini
- [U-Boot] test: hexdump: fix misplaced return
Tom Rini
- [U-Boot] blk: Rework guard around part_init call
Tom Rini
- [U-Boot] fdt: Add warning about CONFIG_OF_EMBED
Tom Rini
- [U-Boot] defconfigs: am335x_hs_evm: Sync HS and non-HS defconfigs
Tom Rini
- [U-Boot] spl: fix build failure with !CONFIG_SPL_PCI_SUPPORT
Tom Rini
- [U-Boot] arm: am335x-pdu001: Move from embedded to separate DTB
Tom Rini
- [U-Boot] ARM: omap3_logic/omap35_logic: Move to DM_USB
Tom Rini
- [U-Boot] ARM: omap3logic: Remove legacy USB code in favor of DM_USB
Tom Rini
- [U-Boot] [U-Boot,1/1] test: overlay: NULL passed as fdt
Tom Rini
- [U-Boot] firmware: psci: introduce SPL_ARM_PSCI_FW
Tom Rini
- [U-Boot] am3517_evm: Use ttyS2 instead of ttyO2
Tom Rini
- [U-Boot] ARM: davinci: Orphan Spectrum Digital AM18xx EVM
Tom Rini
- [U-Boot] [PATCH 05/16] mtd: spi: Port SPI NOR framework from Linux
Tom Rini
- [U-Boot] buildman and "echo" output?
Tom Rini
- [U-Boot] Please pull from u-boot-i2c
Tom Rini
- [U-Boot] buildman and "echo" output?
Tom Rini
- [U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly
Tom Rini
- [U-Boot] [PATCH v5 0/9] Fix CVE-2018-18440 and CVE-2018-18439
Tom Rini
- [U-Boot] [PATCH] net: remove duplicate definition of ETHADDR_WILDCARD
Tom Rini
- [U-Boot] [PATCH] net: fix env flags for eth10addr and above
Tom Rini
- [U-Boot] [PATCH v1] tools: logos: crop Toradex logo slightly
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214
Tom Rini
- [U-Boot] [U-Boot, v2] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181214
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [PATCH] image: fix compiling without CMD_FDT
Tom Rini
- [U-Boot] [PATCH] image: fix compiling without CMD_FDT
Tom Rini
- [U-Boot] [PATCH v6 3/9] lib: lmb: reserving overlapping regions should fail
Tom Rini
- [U-Boot] [U-Boot, 1/1] tee: change return code for REE FS supplicant cmd
Tom Rini
- [U-Boot] hashtable: fix length calculation in hexport_r
Tom Rini
- [U-Boot] [U-Boot, PATCHv2, 1/3] cmd: Move the "dm" command from test/dm/ to cmd/
Tom Rini
- [U-Boot] [U-Boot, PATCHv2, 2/3] test: Only descend into test/ when CONFIG_UNIT_TEST is enabled
Tom Rini
- [U-Boot] [U-Boot, PATCHv2, 3/3] tools: add a generic config for native tools building
Tom Rini
- [U-Boot] poplar: add a co-maintainer for poplar board
Tom Rini
- [U-Boot] poplar: fix boot failure caused by serial driver change
Tom Rini
- [U-Boot] serial: serial_stm32: Add reset support
Tom Rini
- [U-Boot] [U-Boot, v1] tools: mtk_image: replace strncpy(d, s, sizeof(d)) with snprintf()
Tom Rini
- [U-Boot] [U-Boot, v2] syscon: update syscon_node_to_regmap to use the DM functions
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] Please pull u-boot-rockchip
Tom Rini
- [U-Boot] [PATCH V2] Restore compatibility of image type IDs
Tom Rini
- [U-Boot] Makefile: output migration warnings to stderr
Tom Rini
- [U-Boot] arm: ti: boot: Increase system partition size
Tom Rini
- [U-Boot] [PATCH] omap3: beagle: Enable DM_MMC and BLK for u-boot only, not SPL
Tom Rini
- [U-Boot] [ANN] U-Boot v2019.01-rc2 released
Tom Rini
- [U-Boot] Uboot send pull request
Tom Rini
- [U-Boot] [PULL] MIPS updates for v2019.01
Tom Rini
- [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20181219
Tom Rini
- [U-Boot] [PULL] u-boot-socfpga/master
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] Pull request: u-boot-spi/master
Tom Rini
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Tom Rini
- [U-Boot] [PATCH 3/3] arm: dts: Add MMC nodes for HiKey board
Tom Rini
- [U-Boot] Bogus message about SCSI during build
Tom Rini
- [U-Boot] [PATCH 2/2] dm: video: lcd: MIGRATION: Add migration plan for video
Tom Rini
- [U-Boot] [PATCH 2/2] dm: video: lcd: MIGRATION: Add migration plan for video
Tom Rini
- [U-Boot] i.MX8M layout, rephrased
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx: u-boot-imx-20181217
Tom Rini
- [U-Boot] [U-Boot,v2] net: macb: fix mapping of registers
Tom Rini
- [U-Boot] [PATCH v2 3/3] arm: dts: Add MMC nodes for HiKey board
Tom Rini
- [U-Boot] [PATCH] Add a github template telling people to not use pull requests there
Tom Rini
- [U-Boot] please pull u-boot-samsung master
Tom Rini
- [U-Boot] [U-Boot,v1] scripts/check-config.sh: Add usage()
Tom Rini
- [U-Boot] [U-Boot, v2, 1/1] tests: enable DT overlay tests by default
Tom Rini
- [U-Boot] [U-Boot, V2] ARM: mach-omap2: omap3: Fix GPIO clocking in SPL
Tom Rini
- [U-Boot] dm: pinctrl: Prevent (re-)configuring pins when already done before relocation
Tom Rini
- [U-Boot] api: storage: Fix enumeration of storage devices
Tom Rini
- [U-Boot] arm: K3: Fix usage of CONFIG_SYS_K3_KEY
Tom Rini
- [U-Boot] phy: Fix u-boot coruption when fixed-phy is used
Tom Rini
- [U-Boot] [U-Boot, 01/11] mt7623: fix a typo in include/configs/mt7623.h
Tom Rini
- [U-Boot] [U-Boot, 02/11] mt7629: use linux kernel compatible SMP initialization
Tom Rini
- [U-Boot] [U-Boot,1/1] doc: README.commands: sub-commands
Tom Rini
- [U-Boot] power: regulator: Return success on attempt to disable an always-on regulator
Tom Rini
- [U-Boot] Nokia N900: Broken comment after commit 278b90ce (configs: Migrate CONFIG_SYS_TEXT_BASE)
Tom Rini
- [U-Boot] [PATCH 5/5] omap3: igep00x0: Add Device Tree Support and DM_MMC driver
Tom Rini
- [U-Boot] Nokia N900: MTDPARTS_DEFAULT was removed in 43ede0bc (Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT)
Tom Rini
- [U-Boot] Nokia N900: Broken comment after commit 278b90ce (configs: Migrate CONFIG_SYS_TEXT_BASE)
Tom Rini
- [U-Boot] Nokia N900: MTDPARTS_DEFAULT was removed in 43ede0bc (Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT)
Tom Rini
- [U-Boot] Nokia N900: Broken comment after commit 278b90ce (configs: Migrate CONFIG_SYS_TEXT_BASE)
Tom Rini
- [U-Boot] Nokia N900: Broken comment after commit 278b90ce (configs: Migrate CONFIG_SYS_TEXT_BASE)
Tom Rini
- [U-Boot] Nokia N900: MTDPARTS_DEFAULT was removed in 43ede0bc (Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT)
Tom Rini
- [U-Boot] Nokia N900: MTDPARTS_DEFAULT was removed in 43ede0bc (Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT)
Tom Rini
- [U-Boot] [PULL 2019.01] efi patch queue 2018-12-27
Tom Rini
- [U-Boot] [GIT PULL] UniPhier updates for v2019.01
Tom Rini
- [U-Boot] [PATCH 1/1] usb: musb-new: sunxi: Fix null pointer access
Maxime Ripard
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Maxime Ripard
- [U-Boot] [PATCH] sunxi: H6: DRAM: avoid memcpy() on MMIO registers
Maxime Ripard
- [U-Boot] [PATCH] sunxi: update README.sunxi64
Maxime Ripard
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Maxime Ripard
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Maxime Ripard
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Maxime Ripard
- [U-Boot] [PATCH] sunxi: Allow booting from 128KB SD/eMMC offset
Maxime Ripard
- [U-Boot] [PATCH 0/2] mmc: Fix partition table init regression
Maxime Ripard
- [U-Boot] [RFC PATCH] tools: add a generic config for native tools building
Peter Robinson
- [U-Boot] [RFC PATCH] tools: add a generic config for native tools building
Peter Robinson
- [U-Boot] distro: add more efi dtb prefixes
Peter Robinson
- [U-Boot] [RFC PATCH] tools: add a generic config for native tools building
Peter Robinson
- [U-Boot] Some tegra cleanups and Kconfig migrations
Peter Robinson
- [U-Boot] Please pull u-boot-rockchip
Peter Robinson
- [U-Boot] [PATCH] tools: add a generic config for native tools building
Peter Robinson
- [U-Boot] [PATCH] net: mvgbe: fallback phy-mode to GMII
Stefan Roese
- [U-Boot] [PATCH v2 6/6] arm: mvebu: helios4: Reset uSOM onboard phy during board init
Stefan Roese
- [U-Boot] [PATCH v2 1/1] ARM: mvebu: a38x: sync ddr training code with mv_ddr-armada-18.09.02
Stefan Roese
- [U-Boot] [PATCH 1/1] net: mvneta: Add GPIO configuration support
Stefan Roese
- [U-Boot] [PATCH v3 1/6] arm: mvebu: helios4: mmc: move environment before 1M
Stefan Roese
- [U-Boot] [PATCH v3 2/6] arm: mvebu: helios4: Enable I2C and IO Expander
Stefan Roese
- [U-Boot] [PATCH v3 3/6] arm: mvebu: helios4: Enable mvebu GPIO
Stefan Roese
- [U-Boot] [PATCH v3 4/6] arm: mvebu: helios4: Reduce U-Boot image size
Stefan Roese
- [U-Boot] [PATCH v3 5/6] arm: mvebu: helios4: Enable SPI flash support
Stefan Roese
- [U-Boot] [PATCH v3 6/6] arm: mvebu: helios4: Reset uSOM onboard phy during board init
Stefan Roese
- [U-Boot] [U-Boot, PATCHv3, 2/4] dm: MIGRATION: Add migration plan for DM_USB
Stefan Roese
- [U-Boot] Issue with memcpy when booting a fitImage on SPEAr600
Stefan Roese
- [U-Boot] [PATCH v2 2/5] dts: switch spi-flash to jedec, spi-nor compatible
Stefan Roese
- [U-Boot] [PATCH] ARM: mvebu: define CONFIG_BLK for db-88f6820-amc
Stefan Roese
- [U-Boot] [PATCH] ARM: mvebu: sync Armada-38x dts with Linux 4.20
Stefan Roese
- [U-Boot] [PATCH v2 1/1] ARM: mvebu: a38x: sync ddr training code with mv_ddr-armada-18.09.02
Stefan Roese
- [U-Boot] [PATCH v3 0/6] Update support for Helios4 board
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] [PATCH 5/7] mips: mt76xx: gardena-smart-gateway: Read default speed and mode values from DT
Stefan Roese
- [U-Boot] [PATCH u-boot-marvell v3 09/10] board: turris_mox: Support 1 GB version of Turris Mox
Stefan Roese
- [U-Boot] [PATCH u-boot-marvell v3 06/10] watchdog: armada_37xx: Fix compliance with kernel's driver
Stefan Roese
- [U-Boot] MIPS (mt7688): EBase change in U-Boot breaks Linux
Stefan Roese
- [U-Boot] [PATCH u-boot-marvell v3 09/10] board: turris_mox: Support 1 GB version of Turris Mox
Stefan Roese
- [U-Boot] MIPS (mt7688): EBase change in U-Boot breaks Linux
Stefan Roese
- [U-Boot] [PATCH u-boot-marvell v3 09/10] board: turris_mox: Support 1 GB version of Turris Mox
Stefan Roese
- [U-Boot] [PATCH 09/16] sf_mtd: Simply mtd operations
Stefan Roese
- [U-Boot] [PATCH 05/16] mtd: spi: Port SPI NOR framework from Linux
Stefan Roese
- [U-Boot] [PATCH 09/16] sf_mtd: Simply mtd operations
Stefan Roese
- [U-Boot] MIPS (mt7688): EBase change in U-Boot breaks Linux
Stefan Roese
- [U-Boot] MIPS (mt7688): EBase change in U-Boot breaks Linux
Stefan Roese
- [U-Boot] MIPS (mt7688): EBase change in U-Boot breaks Linux
Stefan Roese
- [U-Boot] [PATCH] ARM: mvebu: remove out of date comment
Stefan Roese
- [U-Boot] [PATCH 00/16] SF: Migrate to Linux SPI NOR framework
Stefan Roese
- [U-Boot] MIPS (mt7688): EBase change in U-Boot breaks Linux
Stefan Roese
- [U-Boot] MIPS (mt7688): EBase change in U-Boot breaks Linux
Stefan Roese
- [U-Boot] [PATCH 1/2] mips: mt76xx: Flush d-cache in arch_misc_init() to solve d-cache issues
Stefan Roese
- [U-Boot] [PATCH 2/2] mips: mt76xx: linkit/gardena: Don't use CONFIG_OF_EMBED
Stefan Roese
- [U-Boot] [PATCH 1/2] mips: mt76xx: Flush d-cache in arch_misc_init() to solve d-cache issues
Stefan Roese
- [U-Boot] [PATCH] phy: Fix u-boot coruption when fixed-phy is used
Stefan Roese
- [U-Boot] [PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Stefan Roese
- [U-Boot] [PATCH] arm: configs: helios4: Change U-Boot offset on SPI Flash
Stefan Roese
- [U-Boot] [PATCH 1/1] arm64: mvebu: defconfig: enable CONFIG_CMD_NVME
Stefan Roese
- [U-Boot] [RFC PATCH] ARM: mvebu: add support for Allied Telesis x530
Stefan Roese
- [U-Boot] [PATCH] arm: configs: helios4: Change U-Boot offset on SPI Flash
Stefan Roese
- [U-Boot] [PATCH] ARM: mvebu: define CONFIG_BLK for db-88f6820-amc
Stefan Roese
- [U-Boot] [PATCH] ARM: mvebu: remove out of date comment
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] [PATCH v2 1/1] arm64: dts: marvell: mcbin: reserve PSCI area
Stefan Roese
- [U-Boot] [PATCH v2 1/1] arm64: mvebu: defconfig: enable CONFIG_CMD_NVME
Stefan Roese
- [U-Boot] Nokia N900: Broken comment after commit 278b90ce (configs: Migrate CONFIG_SYS_TEXT_BASE)
Pali Rohár
- [U-Boot] Nokia N900: MTDPARTS_DEFAULT was removed in 43ede0bc (Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT)
Pali Rohár
- [U-Boot] Nokia N900: Broken comment after commit 278b90ce (configs: Migrate CONFIG_SYS_TEXT_BASE)
Pali Rohár
- [U-Boot] Nokia N900: MTDPARTS_DEFAULT was removed in 43ede0bc (Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT)
Pali Rohár
- [U-Boot] Nokia N900: Broken comment after commit 278b90ce (configs: Migrate CONFIG_SYS_TEXT_BASE)
Pali Rohár
- [U-Boot] Nokia N900: MTDPARTS_DEFAULT was removed in 43ede0bc (Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT)
Pali Rohár
- [U-Boot] Nokia N900: Broken comment after commit 278b90ce (configs: Migrate CONFIG_SYS_TEXT_BASE)
Pali Rohár
- [U-Boot] Nokia N900: MTDPARTS_DEFAULT was removed in 43ede0bc (Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT)
Pali Rohár
- [U-Boot] Nokia N900: MTDPARTS_DEFAULT was removed in 43ede0bc (Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT)
Pali Rohár
- [U-Boot] [PATCH v2 0/3] serial: bcm6345: switch to raw I/O functions
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 1/3] serial: bcm6345: switch to raw I/O functions
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 2/3] arm: implement {in, out}_{16, 32} and {clr, set, clrset}bits_{16, 32}
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 3/3] serial: bcm6858: remove driver and switch to bcm6345
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 00/28] bmips: add iudma/enet support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 01/28] dma: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 02/28] bmips: bcm6338: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 03/28] bmips: bcm6348: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 04/28] bmips: bcm6358: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 05/28] bmips: bcm6368: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 06/28] bmips: bcm6328: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 07/28] bmips: bcm6362: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 08/28] bmips: bcm63268: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 09/28] bmips: bcm6318: add bcm6348-iudma support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 10/28] net: add support for bcm6348-enet
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 11/28] bmips: bcm6338: add support for bcm6348-enet
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 12/28] bmips: enable f at st1704 enet support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 13/28] bmips: bcm6348: add support for bcm6348-enet
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 14/28] bmips: enable ct-5361 enet support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 15/28] bmips: bcm6358: add support for bcm6348-enet
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 16/28] bmips: enable hg556a enet support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 17/28] bmips: enable nb4-ser enet support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 18/28] net: add support for bcm6368-enet
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 19/28] bmips: bcm6368: add support for bcm6368-enet
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 20/28] bmips: enable wap-5813n enet support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 21/28] bmips: bcm6328: add support for bcm6368-enet
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 22/28] bmips: enable ar-5387un enet support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 23/28] bmips: bcm6362: add support for bcm6368-enet
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 24/28] bmips: enable dgnd3700v2 enet support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 25/28] bmips: bcm63268: add support for bcm6368-enet
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 26/28] bmips: enable vr-3032u enet support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 27/28] bmips: bcm6318: add support for bcm6368-enet
Álvaro Fernández Rojas
- [U-Boot] [PATCH v11 28/28] bmips: enable ar-5315u enet support
Álvaro Fernández Rojas
- [U-Boot] [PATCH v2 1/1] dm: core: add functions to get/remap I/O addresses by name
Álvaro Fernández Rojas
- [U-Boot] [PATCH v3 1/1] dm: core: add functions to get/remap I/O addresses by name
Álvaro Fernández Rojas
- [U-Boot] [PATCH] bmips: swapping IO space isn't required
Álvaro Fernández Rojas
- [U-Boot] [PATCH] bmips: swapping IO space isn't required
Álvaro Fernández Rojas
- [U-Boot] [PATCH] bmips: bcm6838: fix device tree warning
Álvaro Fernández Rojas
- [U-Boot] [linux-sunxi] A20-olinuxino-micro hangs in U-boot if powered from MINI-USB only.
Diego Roversi
- [U-Boot] MIPS (mt7688): EBase change in U-Boot breaks Linux
Maciej W. Rozycki
- [U-Boot] a8011eb84d not working on V40 (Banana Pi M2 Berry)
Justus Roßmeier
- [U-Boot] [linux-sunxi] A20-olinuxino-micro hangs in U-boot if powered from MINI-USB only.
John S
- [U-Boot] [linux-sunxi] A20-olinuxino-micro hangs in U-boot if powered from MINI-USB only.
John S
- [U-Boot] [PATCH v3 0/4] Add Rock960 and Ficus 96Board support
Manivannan Sadhasivam
- [U-Boot] [PATCH 1/3] include: configs: Add gunzip size for HiKey board
Manivannan Sadhasivam
- [U-Boot] [PATCH 2/3] mmc: Convert HI6220 MMC driver to driver model
Manivannan Sadhasivam
- [U-Boot] [PATCH 3/3] arm: dts: Add MMC nodes for HiKey board
Manivannan Sadhasivam
- [U-Boot] [PATCH 3/3] arm: dts: Add MMC nodes for HiKey board
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 1/3] include: configs: Add gunzip size for HiKey board
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 2/3] mmc: Convert HI6220 MMC driver to driver model
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 3/3] arm: dts: Add MMC nodes for HiKey board
Manivannan Sadhasivam
- [U-Boot] [PATCH v2 3/3] arm: dts: Add MMC nodes for HiKey board
Manivannan Sadhasivam
- [U-Boot] [PATCH] ARM: rockchip: Add rv1108-elgin-r1 board support
Otavio Salvador
- [U-Boot] [RFC PATCH] tools: add a generic config for native tools building
Otavio Salvador
- [U-Boot] [U-Boot, v2, 2/6] ARM: rpi_*_defconfig: Add support to find UUID for filesystem
Otavio Salvador
- [U-Boot] [PATCH v4] pico-imx7d: Increase the CONFIG_ENV_OFFSET size
Otavio Salvador
- [U-Boot] Is mxsldr and mxsboot supported for imx7 processors
Otavio Salvador
- [U-Boot] [PATCH] tools: add a generic config for native tools building
Otavio Salvador
- [U-Boot] [PATCH] ARM: rockchip: rv1108: Fix booting with initramfs
Otavio Salvador
- [U-Boot] [PATCH] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Otavio Salvador
- [U-Boot] [PATCH] ARM: rockchip: rv1108: Fix booting with initramfs
Otavio Salvador
- [U-Boot] ARM: rockchip: rv1108: Fix booting with initramfs
Otavio Salvador
- [U-Boot] [PATCH 1/3] mx7: Do not call lcdif_power_down() in the SPL case
Otavio Salvador
- [U-Boot] [PATCH 2/3] pico-imx7d: Add LCD support
Otavio Salvador
- [U-Boot] [PATCH 3/3] logos: Add the TechNexion's logo
Otavio Salvador
- [U-Boot] [PATCH v2] imx6: apalis: Make the boot process more generic
Otavio Salvador
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Olliver Schinagl
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Olliver Schinagl
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Olliver Schinagl
- [U-Boot] [PATCH v3 11/31] blk: Call part_init() in the post_probe() method
Hannes Schmelzer
- [U-Boot] [PATCH v3 11/31] blk: Call part_init() in the post_probe() method
Hannes Schmelzer
- [U-Boot] [PATCH v3 11/31] blk: Call part_init() in the post_probe() method
Hannes Schmelzer
- [U-Boot] [RFC PATCH] spl/tpl: change banner into upper case
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 01/19] cmd: Kconfig: Do not include EEPROM if DM_I2C is used without DM_I2C_COMPAT
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 02/19] dm: i2c: Make i2c_get_chip_for_busnum() fail if the chip is not detected
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 03/19] dm: device: Allow using uclass_find_device_by_seq() without OF_CONTROL
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 04/19] configs: am335x: am57x: dra7x: Enable CONFIG_SPL_DM_SEQ_ALIAS
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 05/19] i2c: omap24xx_i2c: Move away from SoC specific headers for reg offset
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 06/19] i2c: omap24xx_i2c: Use platdata to probe the device
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 07/19] am335x: Register the I2C controllers if DM_I2C is used.
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 08/19] dts: am43x: omap5: Add node for I2C in SPL
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 09/19] omap: detect the board after DM is available
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 10/19] power: make most tps drivers and the twl4030 driver compatible with DM_I2C
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 11/19] ti: common: board_detect: Allow DM I2C without CONFIG_DM_I2C_COMPAT
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 12/19] configs: am335x_pdu001: remove CONFIG_DM_I2C_COMPAT
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 13/19] ti: remove usage of DM_I2C_COMPAT and don't disable DM_I2C in SPL
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 14/19] am57xx: remove non-DM I2C code
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 15/19] configs: dra7xx-evm: increase the size of the malloc's pool before relocation
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 16/19] lib: fdtdec: Add function re-setup the fdt more effeciently
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 17/19] drivers: core: Add the option SPL_DM_DEVICE_REMOVE to the Kconfig
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 18/19] drivers: core: nullify gd->dm_root after dm_uninit()
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 19/19] dra7: Allow selecting a new dtb after board detection.
Heiko Schocher
- [U-Boot] [PATCH] cmd: i2c: Fix help output of i2c command.
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c
Heiko Schocher
- [U-Boot] [RESEND PATCH v3 00/19] DM_I2C_COMPAT removal for all ti platforms
Heiko Schocher
- [U-Boot] Regression: dm: i2c: Make i2c_get_chip_for_busnum() fail if the chip is not detected
Heiko Schocher
- [U-Boot] u-boot: at91: wdt broken for smartweb and taurus board
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c
Heiko Schocher
- [U-Boot] [PATCH] i2c: xiic: Add Xilinx AXI I2C driver
Heiko Schocher
- [U-Boot] [PATCH 1/1] doc: README.iscsi: Open-iSCSI configuration
Heinrich Schuchardt
- [U-Boot] [BUG] sandbox_defconfig cannot be run anymore after 4a5b5e1a466d76f "sandbox: Update some drivers to work in SPL/TPL"
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] drivers: rtc: correctly convert seconds to time structure
Heinrich Schuchardt
- [U-Boot] [BUG] sandbox_defconfig cannot be run anymore after 4a5b5e1a466d76f "sandbox: Update some drivers to work in SPL/TPL"
Heinrich Schuchardt
- [U-Boot] distro: add more efi dtb prefixes
Heinrich Schuchardt
- [U-Boot] [BUG] ut overlay fails with v2018.03 and later on qemu-arm64_defconfig
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test: overlay: NULL passed as fdt
Heinrich Schuchardt
- [U-Boot] [BUG] Odroid-C2 does not boot with U-Boot master anymore
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: revert "Align runtime section to 64kb"
Heinrich Schuchardt
- [U-Boot] [BUG] Odroid-C2 does not boot with U-Boot master anymore
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: efi_connect_controller() use %pD
Heinrich Schuchardt
- [U-Boot] [PATCH] efi_loader: Make RTS relocation more robust
Heinrich Schuchardt
- [U-Boot] [PATCH v2] efi_loader: Make RTS relocation more robust
Heinrich Schuchardt
- [U-Boot] [PATCH 1/4] efi_loader: support non-volatile variable behavior
Heinrich Schuchardt
- [U-Boot] [PATCH 2/4] cmd: efishell: support -nv option to setvar sub-command
Heinrich Schuchardt
- [U-Boot] [PATCH 3/4] cmd: efishell: make Boot####/BootOrder variable non-volatile
Heinrich Schuchardt
- [U-Boot] [PATCH 4/4] efi_loader: bootmgr: make BootNext non-volatile
Heinrich Schuchardt
- [U-Boot] [BUG] build warnings for tools/mtk_image.c
Heinrich Schuchardt
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
Heinrich Schuchardt
- [U-Boot] [BeagleBone Black] Possible bug in U-Boot efi loader for BeagleBone Black
Heinrich Schuchardt
- [U-Boot] [BeagleBone Black] Possible bug in U-Boot efi loader for BeagleBone Black
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] test: tests for u16_strdup() and u16_strcpy()
Heinrich Schuchardt
- [U-Boot] [RESEND PATCH v2 1/6] lib: add u16_strcpy/strdup functions
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] tests: enable DT overlay tests by default
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] tests: enable DT overlay tests by default
Heinrich Schuchardt
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: efi_guid_t must be 64-bit aligned
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] efi_loader: efi_guid_t must be 64-bit aligned
Heinrich Schuchardt
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] tools: imx8image: use correct printf escape sequence
Heinrich Schuchardt
- [U-Boot] [BeagleBone Black] Possible bug in U-Boot efi loader for BeagleBone Black
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: efi_guid_t must be 64-bit aligned
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: struct efi_configuration_table
Heinrich Schuchardt
- [U-Boot] [PATCH v3 8/8] cmd: env: add "-e" option for handling UEFI variables
Heinrich Schuchardt
- [U-Boot] Unable to saveenv to MMC
Heinrich Schuchardt
- [U-Boot] [BeagleBone Black] Possible bug in U-Boot efi loader for BeagleBone Black
Heinrich Schuchardt
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] lib: crc32: mark static variable as __efi_runtime_data
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: signature of efi_set_virtual_address_map()
Heinrich Schuchardt
- [U-Boot] [PATCH v3 8/8] cmd: env: add "-e" option for handling UEFI variables
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] efi_loader: efi_add_runtime_mmio()
Heinrich Schuchardt
- [U-Boot] [PATCH v3 6/8] cmd: efishell: add dh command
Heinrich Schuchardt
- [U-Boot] [PATCH v3 3/8] cmd: efishell: add drivers command
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: add exception command
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] arm64: mvebu: defconfig: enable CONFIG_CMD_NVME
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] distro_bootcmd: add NVME support
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] doc: README.commands: sub-commands
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: add exception command
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] arm64: dts: marvell: mcbin: reserve PSCI area
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] arm64: dts: marvell: mcbin: reserve PSCI area
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] arm64: dts: marvell: mcbin: reserve PSCI area
Heinrich Schuchardt
- [U-Boot] [PATCH v3 1/1] arm64: dts: marvell: armada-ap806: reserve PSCI area
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1, for rc3] efi_selftest: block device: avoid read after free
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] efi_loader: efi_add_runtime_mmio()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: efi_add_runtime_mmio()
Heinrich Schuchardt
- [U-Boot] [RFC 1/1] efi_loader: refactor switch to hypervisor mode
Heinrich Schuchardt
- [U-Boot] [PATCH v3 3/8] cmd: efishell: add drivers command
Heinrich Schuchardt
- [U-Boot] [RFC 1/1] efi_loader: refactor switch to hypervisor mode
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] arm64: mvebu: defconfig: enable CONFIG_CMD_NVME
Heinrich Schuchardt
- [U-Boot] [RFC 1/1] efi_loader: refactor switch to hypervisor mode
Heinrich Schuchardt
- [U-Boot] [RFC 1/1] efi_loader: refactor switch to hypervisor mode
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] efi_loader: refactor switch to hypervisor mode
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: add exception command
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: use named constant for efi_dp_from_mem()
Heinrich Schuchardt
- [U-Boot] [PATCH 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior
Heinrich Schuchardt
- [U-Boot] [PATCH 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior
Heinrich Schuchardt
- [U-Boot] [PATCH] test: Use single quote consistently
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: LoadImage: always allocate new pages
Heinrich Schuchardt
- [U-Boot] [PATCH 0/5] efi_loader: rework loading and starting of images
Heinrich Schuchardt
- [U-Boot] [PATCH 1/5] efi_loader: LoadImage: always allocate new pages
Heinrich Schuchardt
- [U-Boot] [PATCH 2/5] efi_loader: set entry point in efi_load_pe()
Heinrich Schuchardt
- [U-Boot] [PATCH 3/5] efi_loader: avoid unnecessary pointer to long conversion
Heinrich Schuchardt
- [U-Boot] [PATCH 4/5] efi_loader: signature of StartImage and Exit
Heinrich Schuchardt
- [U-Boot] [PATCH 5/5] efi_loader: use efi_start_image() for bootefi
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] cmd: add exception command
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: CMD_BOOTEFI_HELLO_COMPILE in configs
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_selftest: allow building on ARMv7-M
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] doc: README.uefi: fix typos
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] doc: README.commands: fix type
Heinrich Schuchardt
- [U-Boot] [PATCH v2 1/1] efi_loader: move efi_init_obj_list() to a new efi_setup.c
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: refactor switch to non-secure mode
Heinrich Schuchardt
- [U-Boot] [PATCH v3 1/8] cmd: add efishell command
Heinrich Schuchardt
- [U-Boot] [PATCH v3 1/8] cmd: add efishell command
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: use const efi_guid_t * for variable services
Heinrich Schuchardt
- [U-Boot] [PATCH 1/1] efi_loader: efi_set_variable use const void *
Heinrich Schuchardt
- [U-Boot] [PATCH v3 1/8] cmd: add efishell command
Heinrich Schuchardt
- [U-Boot] Issue with memcpy when booting a fitImage on SPEAr600
Quentin Schulz
- [U-Boot] [PATCH v3 1/1] dm: core: add functions to get/remap I/O addresses by name
Daniel Schwierzeck
- [U-Boot] [PATCH] bmips: swapping IO space isn't required
Daniel Schwierzeck
- [U-Boot] [PATCH v11 00/28] bmips: add iudma/enet support
Daniel Schwierzeck
- [U-Boot] [PATCH v3 3/7] MSCC: add support for Ocelot SoCs
Daniel Schwierzeck
- [U-Boot] [PATCH v3 4/7] MSCC: add support for Luton SoCs
Daniel Schwierzeck
- [U-Boot] [PATCH v3 5/7] MSCC: add board support for the Ocelots based evaluation boards
Daniel Schwierzeck
- [U-Boot] [PATCH v3 7/7] MIPS: bootm: Add support for Vcore III linux kernel
Daniel Schwierzeck
- [U-Boot] [PATCH v2] gpio: mscc-bitbang-spi: Add a simple gpio driver for bitbgang spi
Daniel Schwierzeck
- [U-Boot] [PATCH v3] pinctrl: mscc: Add gpio and pinctrl driver for MSCC MIPS SoCs (VcoreIII based)
Daniel Schwierzeck
- [U-Boot] [PATCH] bmips: bcm6838: fix device tree warning
Daniel Schwierzeck
- [U-Boot] [PATCH] bmips: swapping IO space isn't required
Daniel Schwierzeck
- [U-Boot] [GIT PULL] u-boot-mips
Daniel Schwierzeck
- [U-Boot] [PATCH v2 0/6] Add support for MIPS Creator CI20
Daniel Schwierzeck
- [U-Boot] [PATCH v2 0/6] Add support for MIPS Creator CI20
Daniel Schwierzeck
- [U-Boot] MIPS (mt7688): EBase change in U-Boot breaks Linux
Daniel Schwierzeck
- [U-Boot] [PATCH 09/16] sf_mtd: Simply mtd operations
Daniel Schwierzeck
- [U-Boot] MIPS (mt7688): EBase change in U-Boot breaks Linux
Daniel Schwierzeck
- [U-Boot] MIPS (mt7688): EBase change in U-Boot breaks Linux
Daniel Schwierzeck
- [U-Boot] [PATCH v3 3/7] MSCC: add support for Ocelot SoCs
Daniel Schwierzeck
- [U-Boot] [PATCH v4 6/7] MSCC: add board support for the Luton based evaluation board
Daniel Schwierzeck
- [U-Boot] [PATCH] mips: ath79: fix DTC warnings
Daniel Schwierzeck
- [U-Boot] [PATCH] mips: xilfpga: fix DTC warnings
Daniel Schwierzeck
- [U-Boot] [PATCH] net: macb: fix mapping of registers
Daniel Schwierzeck
- [U-Boot] [PATCH v4 6/7] MSCC: add board support for the Luton based evaluation board
Daniel Schwierzeck
- [U-Boot] [PATCH v4 0/7] Add support for the SoCs found in Microsemi switches
Daniel Schwierzeck
- [U-Boot] [PATCH v3 0/5] Add support for MIPS Creator CI20
Daniel Schwierzeck
- [U-Boot] [PATCH 1/2] mips: mt76xx: Flush d-cache in arch_misc_init() to solve d-cache issues
Daniel Schwierzeck
- [U-Boot] [PATCH] MIPS: remove local_irq_[save|restore] from CP0 macros
Daniel Schwierzeck
- [U-Boot] [PULL] MIPS updates for v2019.01
Daniel Schwierzeck
- [U-Boot] [PATCH] MIPS: remove local_irq_[save|restore] from CP0 macros
Daniel Schwierzeck
- [U-Boot] [PATCH v2] net: macb: fix mapping of registers
Daniel Schwierzeck
- [U-Boot] [PATCH 1/6] mips: luton+ocelot: Remove board-specific config options
Daniel Schwierzeck
- [U-Boot] [PATCH v2 0/4] mips: mscc: Add multi-dtb support to luton+ocelot
Daniel Schwierzeck
- [U-Boot] [PATCH 1/6] mips: mscc_sgpio: Add the MSCC serial GPIO device (SIO)
Daniel Schwierzeck
- [U-Boot] [PATCH v2 1/6] mips: mscc_sgpio: Add the MSCC serial GPIO device (SIO)
Daniel Schwierzeck
- [U-Boot] [PATCH] spi: soft_spi: Fix null ptr when probing soft_spi.
Daniel Schwierzeck
- [U-Boot] [PATCH] pcm058: fix NAND flash not using badblock table
Harald Seiler
- [U-Boot] [PATCH v2] pcm058: fix NAND flash not using badblock table
Harald Seiler
- [U-Boot] [PATCH v2] pcm058: fix NAND flash not using badblock table
Harald Seiler
- [U-Boot] [PATCH v2] pcm058: fix NAND flash not using badblock table
Harald Seiler
- [U-Boot] [PATCH 1/5] omap3: igep00x0: Remove unmaintained IGEP0032 defconfig
Enric Balletbo i Serra
- [U-Boot] [PATCH 2/5] omap3: igep00x0: Remove USB support due DM_USB deadline
Enric Balletbo i Serra
- [U-Boot] [PATCH 3/5] omap3: igep00x0: Switch to using TI_COMMON_CMD_OPTION
Enric Balletbo i Serra
- [U-Boot] [PATCH 4/5] omap3: igep00x0: Switch to simple malloc in SPL
Enric Balletbo i Serra
- [U-Boot] [PATCH 5/5] omap3: igep00x0: Add Device Tree Support and DM_MMC driver
Enric Balletbo i Serra
- [U-Boot] [PATCH] am335x: sl50: Add Device Tree Support and DM_MMC driver
Enric Balletbo i Serra
- [U-Boot] [PATCH 1/2] igep003x: MAINTAINER: Remove myself as maintainer and add Javier
Enric Balletbo i Serra
- [U-Boot] [PATCH 2/2 (RFT)] am335x: igep003x: Add Device Tree Support and DM_MMC driver
Enric Balletbo i Serra
- [U-Boot] [PATCH 1/2] configs: igep: Define default mtdids/mtdparts
Enric Balletbo Serra
- [U-Boot] [PATCH 2/2] mtd: Get rid of board_mtdparts_default()
Enric Balletbo Serra
- [U-Boot] [PATCH 1/2] configs: igep: Define default mtdids/mtdparts
Enric Balletbo Serra
- [U-Boot] [PATCH 2/2] mtd: Get rid of board_mtdparts_default()
Enric Balletbo Serra
- [U-Boot] [PATCH v3 1/7] dm: serial: Add ->getconfig() callback
Andy Shevchenko
- [U-Boot] [PATCH v3 1/7] dm: serial: Add ->getconfig() callback
Andy Shevchenko
- [U-Boot] [PATCH 0/5] dm: serial: Fix up some serial API errors
Andy Shevchenko
- [U-Boot] [PATCH v1] tools: mtk_image: replace strncpy(d, s, sizeof(d)) with snprintf()
Andy Shevchenko
- [U-Boot] Bogus message about SCSI during build
Andy Shevchenko
- [U-Boot] [PATCH v1] scripts/check-config.sh: Add usage()
Andy Shevchenko
- [U-Boot] [PATCH v1 1/3] x86: edison: move CONFIG_CMD_PCI from header file to defconfig
Andy Shevchenko
- [U-Boot] [PATCH v1 2/3] x86: edison: move CONFIG_BOOTCOMMAND from header file to defconfig
Andy Shevchenko
- [U-Boot] [PATCH v1 3/3] x86: edison: Remove staled comments from configuration header
Andy Shevchenko
- [U-Boot] [PATCH v3] efi_loader: Reserve unaccessible memory
Baruch Siach
- [U-Boot] [PATCH v2 6/6] arm: mvebu: helios4: Reset uSOM onboard phy during board init
Baruch Siach
- [U-Boot] [PATCH v2 1/1] ARM: mvebu: a38x: sync ddr training code with mv_ddr-armada-18.09.02
Baruch Siach
- [U-Boot] [PATCH] ARM: mvebu: sync Armada-38x dts with Linux 4.20
Baruch Siach
- [U-Boot] [PATCH] tools: zynqmpimage: round up partition size
Michal Simek
- [U-Boot] [PATCH 1/2] net: phy: Move fixed link code to separate routine
Michal Simek
- [U-Boot] [PATCH] arm64: zynqmp: Add new header file for zcu104 RevC
Michal Simek
- [U-Boot] [PATCH] tools: zynqmpimage: round up partition size
Michal Simek
- [U-Boot] [PATCH 1/2] net: zynq_gem: Added 64-bit addressing support
Michal Simek
- [U-Boot] [PATCH 1/2] mtd: nand: arasan_nfc: Add support for nand multi chip select
Michal Simek
- [U-Boot] [PATCH 2/2] arm64: zynqmp: Enable 2 NAND chips for zc1751 dc2
Michal Simek
- [U-Boot] [GIT PULL] Xilinx patches for v2019.01
Michal Simek
- [U-Boot] [PATCH v2] tools: zynqmpimage: round up partition size
Michal Simek
- [U-Boot] [PATCH] usb: dwc3: Add missing dependency on MISC uclass
Michal Simek
- [U-Boot] [PATCH] mmc: zynq: Remove unused pwrseq variable
Michal Simek
- [U-Boot] [PATCH] usb: dwc3: Add missing dependency on MISC uclass
Michal Simek
- [U-Boot] [PATCH] usb: dwc3: Add missing dependency on MISC uclass
Michal Simek
- [U-Boot] [PATCH] zynq-gem: Flush cache before handing RX packet to receive handler
Michal Simek
- [U-Boot] [PATCH] zynq-gem: Flush cache before handing RX packet to receive handler
Michal Simek
- [U-Boot] [PATCH] zynq-gem: Flush cache before handing RX packet to receive handler
Michal Simek
- [U-Boot] [PATCH] tools: zynqmpimage: round up partition size
Michal Simek
- [U-Boot] [PATCH] phy: Fix u-boot coruption when fixed-phy is used
Michal Simek
- [U-Boot] [PATCH 1/2] travis: Setup QEMU_VERSION as variable
Michal Simek
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Michal Simek
- [U-Boot] [PATCH 2/2] travis: Wire Xilinx Versal Virt platform
Michal Simek
- [U-Boot] [PATCH 1/2] arm64: zynqmp: Do not protect zynqmp_pmufw_version()
Michal Simek
- [U-Boot] [PATCH 2/2] arm64: zynqmp: Protect board_late_init function
Michal Simek
- [U-Boot] [PATCH v5] zynq-gem: Use appropriate cache flush/invalidate for RX and TX
Michal Simek
- [U-Boot] [PATCH 1/1] zynq: Kconfig: extend the bootstrap malloc() pool
Michal Simek
- [U-Boot] [PATCH 2/2] net: phy: Add gmiitorgmii converter support
Michal Simek
- [U-Boot] [PATCH] phy: Fix u-boot coruption when fixed-phy is used
Michal Simek
- [U-Boot] [Fwd: [PATCH] mpc83xx: Add support for -msingle-pic-base]
Mario Six
- [U-Boot] [Fwd: [PATCH] mpc83xx: Add support for -msingle-pic-base]
Mario Six
- [U-Boot] i.MX8MQ-EVK with ext4 read support
Chris Spencer
- [U-Boot] i.MX8MQ-EVK with ext4 read support
Chris Spencer
- [U-Boot] [PATCH] imx: Add Makefile dependency for mkimage_fit_atf.sh
Christopher Spencer
- [U-Boot] [PATCH] imx: Add Makefile dependency for mkimage_fit_atf.sh
Christopher Spencer
- [U-Boot] r40 enable loading from spi
Ralph Spitzner
- [U-Boot] [PATCH v2 1/2] mtd/spi: Add JEDEC SFDP support in SPI framework
Rajat Srivastava
- [U-Boot] [PATCH] rockchip: rk3288: dts: remove 'vmmc' from emmc node
Heiko Stuebner
- [U-Boot] ARM: rockchip: rv1108: Fix booting with initramfs
Heiko Stuebner
- [U-Boot] [PATCH v6 02/27] env: allow flash and nand env driver to compile together
York Sun
- [U-Boot] [PATCH v6 03/27] env: sf: define API to override sf environment address
York Sun
- [U-Boot] [PATCH 1/2] AQUANTIA USXGMII autoneg enable
York Sun
- [U-Boot] [PATCH] mpc85xx: Add support for -msingle-pic-base
York Sun
- [U-Boot] [PATCH v6 00/27] TF-A Boot support for NXP Chassis 2 platforms
York Sun
- [U-Boot] [PATCH 1/4] scsi: ceva: add ls1046a soc support
York Sun
- [U-Boot] [PATCH 1/3] scsi: ceva: add ls1088a soc support
York Sun
- [U-Boot] [PATCH 1/3] scsi: ceva: add ls2080a soc support
York Sun
- [U-Boot] [PATCH] arm: ls1021a: Add timer_init() in board_init_f for SPL
York Sun
- [U-Boot] [PATCH] armv8: ls1088ardb_pb: Add support for board detection
York Sun
- [U-Boot] [PATCH] ls1088a: Move CONFIG_FSL_QSPI to defconfig
York Sun
- [U-Boot] [PATCH] board/freescale/vid: Add correction for ltc3882 read error.
York Sun
- [U-Boot] [PATCH][v2] armv8: lsch3: Add support of serdes3 module
York Sun
- [U-Boot] [PATCH] board/freescale/vid: Add vdd table for NXP LX2160A SoC
York Sun
- [U-Boot] [PATCH][v2] armv8:fsl-layerscape: Add support for Chassis 3.2
York Sun
- [U-Boot] [PATCH][v3] armv8: lx2160a: Add LX2160A SoC Support
York Sun
- [U-Boot] Please pull fsl-qoriq master
York Sun
- [U-Boot] Please pull fsl-qoriq master
York Sun
- [U-Boot] armv8: Secure Boot: Modify boot_a_script definition
York Sun
- [U-Boot] [PATCH v1] LS2080ardb: MMC: disable esdhc for dspi
York Sun
- [U-Boot] [PATCH v2] armv8: ls2080ardb: enable eSDHC pin mux support
York Sun
- [U-Boot] [PATCH v3 1/1] efi_loader: rework fdt handling in distro boot script
AKASHI Takahiro
- [U-Boot] [PATCH v2 03/14] efi_loader: bootmgr: allow for running a given load option
AKASHI Takahiro
- [U-Boot] [PATCH v2 04/14] cmd: add efishell command
AKASHI Takahiro
- [U-Boot] [PATCH v2 05/14] cmd: efishell: add devices command
AKASHI Takahiro
- [U-Boot] [PATCH v2 08/14] cmd: efishell: add memmap command
AKASHI Takahiro
- [U-Boot] [PATCH v2 10/14] cmd: bootefi: carve out fdt parameter handling
AKASHI Takahiro
- [U-Boot] [PATCH v2 12/14] cmd: run: add "-e" option to run an EFI application
AKASHI Takahiro
- [U-Boot] [PATCH v2 13/14] cmd: efishell: export uefi variable helper functions
AKASHI Takahiro
- [U-Boot] [PATCH v2] efi_loader: set image_base and image_size to correct values
AKASHI Takahiro
- [U-Boot] [PATCH] distro: not taint environment variables if possible
AKASHI Takahiro
- [U-Boot] [PATCH v2 2/3] efi_loader: enumerate disk devices every time
AKASHI Takahiro
- [U-Boot] [PATCH v2] efi_loader: set image_base and image_size to correct values
AKASHI Takahiro
- [U-Boot] [PATCH] hashtable: fix length calculation in hexport_r
AKASHI Takahiro
- [U-Boot] [PATCH 1/2] efi_loader: implement GetNextVariableName()
AKASHI Takahiro
- [U-Boot] [PATCH 2/2] efi_selftest: fix variables test for GetNextVariableName()
AKASHI Takahiro
- [U-Boot] [RESEND PATCH 0/2] uefi: support USB boot in distro boot
AKASHI Takahiro
- [U-Boot] [RESEND PATCH 1/2] ARM: qemu-arm: enable usb mass storage in default configuration
AKASHI Takahiro
- [U-Boot] [RESEND PATCH 2/2] ARM: qemu-arm: enable USB boot in distro boot with UEFI
AKASHI Takahiro
- [U-Boot] [RESEND PATCH v2 0/6] subject: efi_loader: add HII database protocol
AKASHI Takahiro
- [U-Boot] [RESEND PATCH v2 1/6] lib: add u16_strcpy/strdup functions
AKASHI Takahiro
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
AKASHI Takahiro
- [U-Boot] [RESEND PATCH v2 3/6] efi: hii: add guid package support
AKASHI Takahiro
- [U-Boot] [RESEND PATCH v2 4/6] efi: hii: add keyboard layout package support
AKASHI Takahiro
- [U-Boot] [RESEND PATCH v2 5/6] efi: hii: add HII config routing/access protocols
AKASHI Takahiro
- [U-Boot] [RESEND PATCH v2 6/6] efi_selftest: add HII database protocols test
AKASHI Takahiro
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
AKASHI Takahiro
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
AKASHI Takahiro
- [U-Boot] [PATCH] efi_loader: move efi_init_obj_list() to a new efi_setup.c
AKASHI Takahiro
- [U-Boot] [PATCH 0/5] efi_loader: run a specific efi application more easily
AKASHI Takahiro
- [U-Boot] [PATCH 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior
AKASHI Takahiro
- [U-Boot] [PATCH 2/5] efi_loader: bootmgr: allow for running a given load option
AKASHI Takahiro
- [U-Boot] [PATCH 3/5] cmd: bootefi: carve out fdt parameter handling
AKASHI Takahiro
- [U-Boot] [PATCH 4/5] cmd: bootefi: run an EFI application of a specific load option
AKASHI Takahiro
- [U-Boot] [PATCH 5/5] cmd: run: add "-e" option to run an EFI application
AKASHI Takahiro
- [U-Boot] [PATCH v3 0/8] cmd: add efishell for efi environment
AKASHI Takahiro
- [U-Boot] [PATCH v3 1/8] cmd: add efishell command
AKASHI Takahiro
- [U-Boot] [PATCH v3 2/8] cmd: efishell: add devices command
AKASHI Takahiro
- [U-Boot] [PATCH v3 3/8] cmd: efishell: add drivers command
AKASHI Takahiro
- [U-Boot] [PATCH v3 4/8] cmd: efishell: add images command
AKASHI Takahiro
- [U-Boot] [PATCH v3 5/8] cmd: efishell: add memmap command
AKASHI Takahiro
- [U-Boot] [PATCH v3 6/8] cmd: efishell: add dh command
AKASHI Takahiro
- [U-Boot] [PATCH v3 7/8] cmd: efishell: export uefi variable helper functions
AKASHI Takahiro
- [U-Boot] [PATCH v3 8/8] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
AKASHI Takahiro
- [U-Boot] [PATCH v3 8/8] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [PATCH v3 6/8] cmd: efishell: add dh command
AKASHI Takahiro
- [U-Boot] [PATCH v3 3/8] cmd: efishell: add drivers command
AKASHI Takahiro
- [U-Boot] [RESEND PATCH v2 2/6] efi_loader: Initial HII database protocols
AKASHI Takahiro
- [U-Boot] [PATCH v3 8/8] cmd: env: add "-e" option for handling UEFI variables
AKASHI Takahiro
- [U-Boot] [PATCH 1/5] efi_loader: bootmgr: support BootNext and BootCurrent variable behavior
AKASHI Takahiro
- [U-Boot] [PATCH 2/5] efi_loader: bootmgr: allow for running a given load option
AKASHI Takahiro
- [U-Boot] [PATCH 3/5] cmd: bootefi: carve out fdt parameter handling
AKASHI Takahiro
- [U-Boot] [PATCH 4/5] cmd: bootefi: run an EFI application of a specific load option
AKASHI Takahiro
- [U-Boot] [PATCH 5/5] cmd: run: add "-e" option to run an EFI application
AKASHI Takahiro
- [U-Boot] [PATCH] efi_loader: move efi_init_obj_list() to a new efi_setup.c
AKASHI Takahiro
- [U-Boot] [RESEND PATCH 1/2] ARM: qemu-arm: enable usb mass storage in default configuration
AKASHI Takahiro
- [U-Boot] [PATCH v2 05/14] cmd: efishell: add devices command
AKASHI Takahiro
- [U-Boot] [PATCH v2 10/14] cmd: bootefi: carve out fdt parameter handling
AKASHI Takahiro
- [U-Boot] [PATCH v2 13/14] cmd: efishell: export uefi variable helper functions
AKASHI Takahiro
- [U-Boot] [PATCH] mmc: dwmmc: Poll for iDMAC TX/RX interrupt
Ley Foon Tan
- [U-Boot] [PATCH v4 00/11] mtd/sf: Various fixes
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Jagan Teki
- [U-Boot] [linux-sunxi] r40 enable loading from spi
Jagan Teki
- [U-Boot] [linux-sunxi] [PATCH v3 0/9] Stop AXP from crashing when enabling LDO3
Jagan Teki
- [U-Boot] [PATCH] sunxi: update README.sunxi64
Jagan Teki
- [U-Boot] Pull request: u-boot-sunxi/master
Jagan Teki
- [U-Boot] [PATCH v2 3/5] mtd: sf_probe: remove spi-flash compatible
Jagan Teki
- [U-Boot] [RFC PATCH v2 00/11] SF: Migrate to Linux SPI NOR framework
Jagan Teki
- [U-Boot] [PATCH 1/7] spi: update management of default speed and mode
Jagan Teki
- [U-Boot] [PATCH 3/7] da850evm: sf: Read default speed and mode values from DT
Jagan Teki
- [U-Boot] [PATCH 6/7] env: Read default speed and mode values from DT
Jagan Teki
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Jagan Teki
- [U-Boot] [PATCH 05/16] mtd: spi: Port SPI NOR framework from Linux
Jagan Teki
- [U-Boot] [PATCH 07/16] mtd: spi: Remove unused files
Jagan Teki
- [U-Boot] [PATCH 10/16] configs: Get rid of SPI_FLASH_BAR
Jagan Teki
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Jagan Teki
- [U-Boot] [PATCH 11/16] configs: Remove SF_DUAL_FLASH
Jagan Teki
- [U-Boot] [PATCH 16/16] MAINTAINERS: Add an entry for SPI NOR
Jagan Teki
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Jagan Teki
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Jagan Teki
- [U-Boot] [PATCH 05/16] mtd: spi: Port SPI NOR framework from Linux
Jagan Teki
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Jagan Teki
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Jagan Teki
- [U-Boot] [PATCH 00/16] SF: Migrate to Linux SPI NOR framework
Jagan Teki
- [U-Boot] [PATCH 1/1] usb: musb-new: sunxi: Fix null pointer access
Jagan Teki
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Jagan Teki
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Jagan Teki
- [U-Boot] [PATCH 03/16] spi: Add non DM version of SPI_MEM
Jagan Teki
- [U-Boot] [PATCH] dm: MIGRATION: Update migration plan for SPI/SPI_FLASH
Jagan Teki
- [U-Boot] [PATCH 00/16] SF: Migrate to Linux SPI NOR framework
Jagan Teki
- [U-Boot] [PATCH 00/16] SF: Migrate to Linux SPI NOR framework
Jagan Teki
- [U-Boot] [PATCH 00/16] SF: Migrate to Linux SPI NOR framework
Jagan Teki
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Jagan Teki
- [U-Boot] [PATCH v4 06/10] dm: usb: create a new UCLASS ID for USB gadget devices
Jagan Teki
- [U-Boot] [PATCH 00/16] SF: Migrate to Linux SPI NOR framework
Jagan Teki
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Jagan Teki
- [U-Boot] [PATCH 2/2] dm: video: lcd: MIGRATION: Add migration plan for video
Jagan Teki
- [U-Boot] [linux-sunxi] CONFIG_DM_USB breakage on sunxi boards with musb?
Jagan Teki
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Jagan Teki
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Jagan Teki
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Jagan Teki
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Jagan Teki
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Jagan Teki
- [U-Boot] [PATCH 1/1] arm: sunxi: Add NULL pointer check
Jagan Teki
- [U-Boot] [PATCH] spi: soft_spi: Fix null ptr when probing soft_spi.
Jagan Teki
- [U-Boot] [PATCH] spi: cadence_qspi: remap iomem registers instead of just mapping
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] Pull request: u-boot-spi/master
Jagan Teki
- [U-Boot] [PATCH] dm: usb: gadget: Fix boot breakage on sunxi platforms
Jagan Teki
- [U-Boot] [linux-sunxi] [PATCH] Yet another old Hynix chip id.
Jagan Teki
- [U-Boot] [PATCH] dm: usb: gadget: Fix boot breakage on sunxi platforms
Jagan Teki
- [U-Boot] [PATCH] Add Hynix H27UBG8T2BTR id
Jagan Teki
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Jagan Teki
- [U-Boot] [PATCH] Add NFC register definitions for Allwinner A20 SoC
Jagan Teki
- [U-Boot] [PATCH v5 00/26] clk: Add Allwinner CLK, RESET support
Jagan Teki
- [U-Boot] [PATCH v5 01/26] clk: Add Allwinner A64 CLK driver
Jagan Teki
- [U-Boot] [PATCH v5 02/26] reset: Add Allwinner RESET driver
Jagan Teki
- [U-Boot] [PATCH v5 03/26] clk: sunxi: Add Allwinner H3/H5 CLK driver
Jagan Teki
- [U-Boot] [PATCH v5 04/26] clk: sunxi: Add Allwinner A10/A20 CLK driver
Jagan Teki
- [U-Boot] [PATCH v5 05/26] clk: sunxi: Add Allwinner A10s/A13 CLK driver
Jagan Teki
- [U-Boot] [PATCH v5 06/26] clk: sunxi: Add Allwinner A31 CLK driver
Jagan Teki
- [U-Boot] [PATCH v5 07/26] clk: sunxi: Add Allwinner A23/A33 CLK driver
Jagan Teki
- [U-Boot] [PATCH v5 08/26] clk: sunxi: Add Allwinner A83T CLK driver
Jagan Teki
- [U-Boot] [PATCH v5 09/26] clk: sunxi: Add Allwinner R40 CLK driver
Jagan Teki
- [U-Boot] [PATCH v5 10/26] clk: sunxi: Add Allwinner V3S CLK driver
Jagan Teki
- [U-Boot] [PATCH v5 11/26] clk: sunxi: Implement UART clocks
Jagan Teki
- [U-Boot] [PATCH v5 12/26] clk: sunxi: Implement UART resets
Jagan Teki
- [U-Boot] [PATCH v5 13/26] clk: sunxi: Add Allwinner H6 CLK driver
Jagan Teki
- [U-Boot] [PATCH v5 14/26] sunxi: A64: Update sun50i-a64-ccu.h
Jagan Teki
- [U-Boot] [PATCH v5 15/26] clk: sunxi: Add ccu clock tree support
Jagan Teki
- [U-Boot] [PATCH v5 16/26] sunxi: Enable CLK
Jagan Teki
- [U-Boot] [PATCH v5 17/26] phy: sun4i-usb: Use CLK and RESET support
Jagan Teki
- [U-Boot] [PATCH v5 18/26] reset: Add reset valid
Jagan Teki
- [U-Boot] [PATCH v5 19/26] musb-new: sunxi: Use CLK and RESET support
Jagan Teki
- [U-Boot] [PATCH v5 20/26] sunxi: usb: Switch to Generic host controllers
Jagan Teki
- [U-Boot] [PATCH v5 21/26] usb: host: Drop [e-o]hci-sunxi drivers
Jagan Teki
- [U-Boot] [PATCH v5 22/26] clk: sunxi: Implement SPI clocks
Jagan Teki
- [U-Boot] [PATCH v5 23/26] spi: sun4i: Add CLK support
Jagan Teki
- [U-Boot] [PATCH v5 24/26] clk: sunxi: Implement A64 SPI clocks, resets
Jagan Teki
- [U-Boot] [PATCH v5 25/26] spi: Add Allwinner A31 SPI driver
Jagan Teki
- [U-Boot] [PATCH v5 26/26] board: sopine: Enable SPI/SPI-FLASH
Jagan Teki
- [U-Boot] [PATCH v5 17/26] phy: sun4i-usb: Use CLK and RESET support
Jagan Teki
- [U-Boot] [PATCH] zynq-gem: Flush cache before handing RX packet to receive handler
Stefan Theil
- [U-Boot] [PATCH] zynq-gem: Flush cache before handing RX packet to receive handler
Stefan Theil
- [U-Boot] [PATCH] zynq-gem: Flush cache before handing RX packet to receive handler
Stefan Theil
- [U-Boot] [PATCH] zynq-gem: Flush cache before handing RX packet to receive handler
Stefan Theil
- [U-Boot] [PATCH v2] zynq-gem: Flush cache before handing RX packet to receive handler
Stefan Theil
- [U-Boot] [PATCH v3] zynq-gem: Use appropriate cache flush/invalidate for RX and TX
Stefan Theil
- [U-Boot] [PATCH] zynq-gem: Flush cache before handing RX packet to receive handler
Stefan Theil
- [U-Boot] [PATCH v4] zynq-gem: Use appropriate cache flush/invalidate for RX and TX
Stefan Theil
- [U-Boot] [PATCH v4] zynq-gem: Use appropriate cache flush/invalidate for RX and TX
Stefan Theil
- [U-Boot] [PATCH v4] zynq-gem: Use appropriate cache flush/invalidate for RX and TX
Stefan Theil
- [U-Boot] [PATCH v5] zynq-gem: Use appropriate cache flush/invalidate for RX and TX
Stefan Theil
- [U-Boot] [PATCH] qemu-arm: Add persistent environment support
Daniel Thompson
- [U-Boot] [PATCH] qemu-arm: Add persistent environment support
Daniel Thompson
- [U-Boot] [PATCH] mpc85xx: Add support for -msingle-pic-base
Joakim Tjernlund
- [U-Boot] Please pull u-boot-rockchip
Philipp Tomsich
- [U-Boot] [PATCH v3 5/5] arc: select BOUNCE_BUFFER for CMD_NAND on AXS10x
Philipp Tomsich
- [U-Boot] [PATCH v3 1/5] Kconfig: Migrate BOUNCE_BUFFER
Philipp Tomsich
- [U-Boot] [PATCH v3 1/5] Kconfig: Migrate BOUNCE_BUFFER
Philipp Tomsich
- [U-Boot] [PATCH] Revert "serial: ns16550: fix debug uart putc called before init"
Philipp Tomsich
- [U-Boot] about rk3399 boot speed
Philipp Tomsich
- [U-Boot] [PATCH] rockchip: rk3288: dts: remove 'vmmc' from emmc node
Philipp Tomsich
- [U-Boot] [PATCH] rockchip: rk322x: ram: enable DRAM init in SPL instead of TPL
Philipp Tomsich
- [U-Boot] [PATCH] cmd: i2c: Fix help output of i2c command.
Philipp Tomsich
- [U-Boot] Please pull u-boot-rockchip
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 4/4] rockchip: rk3399: Add Ficus EE board support
Philipp Tomsich
- [U-Boot] [PATCH] usb: dwc2-otg: make regs_phy (in platdata) a uintptr_t
Philipp Tomsich
- [U-Boot] [PATCH] usb: dwc2-otg: make regs_phy (in platdata) a uintptr_t
Philipp Tomsich
- [U-Boot] [RESENT PATCH 1/2] rockchip: rk3128: use ROCKCHIP_BOOT_MODE_REG to update reboot flag
Philipp Tomsich
- [U-Boot] [PATCH 1/4] rockchip: rk3399-puma: Cleanup vdd_log node in puma DTSI.
Philipp Tomsich
- [U-Boot] [PATCH 2/4] power: regulator: Allow PWM regulator to be omitted from SPL.
Philipp Tomsich
- [U-Boot] [PATCH 4/4] rockchip: puma-rk3399: Enable vdd-log during bootup.
Philipp Tomsich
- [U-Boot] [PATCH 3/4] rockchip: defconfig: puma-rk3399: enable PWM regulator
Philipp Tomsich
- [U-Boot] [PATCH] ARM: rockchip: rv1108: Fix booting with initramfs
Philipp Tomsich
- [U-Boot] [PATCH v2] rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node
Philipp Tomsich
- [U-Boot] [PATCH 05/19] riscv: Add a SYSCON driver for Core Local Interruptor
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 4/4] rockchip: rk3399: Add Ficus EE board support
Philipp Tomsich
- [U-Boot] [PATCH] Enable expression support for CONFIG_BOARD_SIZE_LIMIT
Philipp Tomsich
- [U-Boot] [PATCH v3 0/4] Add Rock960 and Ficus 96Board support
Philipp Tomsich
- [U-Boot] [PATCH] usb: dwc2-otg: make regs_phy (in platdata) a uintptr_t
Philipp Tomsich
- [U-Boot] [PATCH v3 0/4] Add Rock960 and Ficus 96Board support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 1/4] arm: dts: rockchip: add some common pin-settings to rk3399
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 2/4] rockchip: rk3399: Add common Rock960 family from Vamrs
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 3/4] rockchip: rk3399: Add Rock960 CE board support
Philipp Tomsich
- [U-Boot] [U-Boot, v3, 4/4] rockchip: rk3399: Add Ficus EE board support
Philipp Tomsich
- [U-Boot] Please pull u-boot-rockchip
Philipp Tomsich
- [U-Boot] [RESENT PATCH 1/2] rockchip: rk3128: use ROCKCHIP_BOOT_MODE_REG to update reboot flag
Philipp Tomsich
- [U-Boot] [PATCH] ARM: rockchip: rv1108: Fix booting with initramfs
Philipp Tomsich
- [U-Boot] [PATCH v2] rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node
Philipp Tomsich
- [U-Boot] rockchip: rk322x: ram: enable DRAM init in SPL instead of TPL
Philipp Tomsich
- [U-Boot] ARM: rockchip: Add rv1108-elgin-r1 board support
Philipp Tomsich
- [U-Boot] [PATCH 1/2] net: designware: fix tx packet length
Philipp Tomsich
- [U-Boot] ARM: rockchip: rv1108: Fix booting with initramfs
Philipp Tomsich
- [U-Boot] rockchip: rk322x: ram: enable DRAM init in SPL instead of TPL
Philipp Tomsich
- [U-Boot] [U-Boot, v5, 3/3] rockchip: rk3399-puma: enable fan53555 regulators in DTS
Philipp Tomsich
- [U-Boot] [U-Boot, v5, 2/3] rockchip: rk3399-puma: defconfig: enable FAN53555 regulator driver
Philipp Tomsich
- [U-Boot] [U-Boot,v5,1/3] power: add FAN53555 family support
Philipp Tomsich
- [U-Boot] [U-Boot, v2, 2/2] bootcount: add a DM RTC backing store for bootcount
Philipp Tomsich
- [U-Boot] [U-Boot,v2,1/2] bootcount: add uclass for bootcount
Philipp Tomsich
- [U-Boot] ARM: rockchip: rv1108: Fix booting with initramfs
Philipp Tomsich
- [U-Boot] Please pull u-boot-rockchip/master (for-master-20181210)
Philipp Tomsich
- [U-Boot] ARM: rockchip: rv1108: Fix booting with initramfs
Philipp Tomsich
- [U-Boot] [PATCH v1] rockchip: rk3399-puma: Remove obsolete DTS node 'vcc5v0_host'.
Philipp Tomsich
- [U-Boot] [PATCH v2 1/6] rockchip: rk3399-puma: Cleanup of vdd_log DTS entry.
Philipp Tomsich
- [U-Boot] [PATCH v2 0/6] rk3399-puma: Enable PWM regulator for RK3399-Q7
Philipp Tomsich
- [U-Boot] [PATCH v2] rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node
Philipp Tomsich
- [U-Boot] [PATCH] evb_rk3399: revert CONFIG_SYS_MMC_ENV_DEV to 0
Philipp Tomsich
- [U-Boot] [PATCH v2 3/6] rockchip: rk3399-puma: enable PWM regulator in Puma defconfig.
Philipp Tomsich
- [U-Boot] [PATCH v2 5/6] rockchip: rk3399: Add improved pinctrl driver.
Philipp Tomsich
- [U-Boot] [PATCH v2 4/6] dm: pinctrl: Add pinctrl_decode_pin_config_dm().
Philipp Tomsich
- [U-Boot] [PATCH v3] rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node
Philipp Tomsich
- [U-Boot] [PATCH] evb_rk3399: revert CONFIG_SYS_MMC_ENV_DEV to 0
Philipp Tomsich
- [U-Boot] [PATCH] Restore compatibility of image type IDs
Philipp Tomsich
- [U-Boot] [PATCH v2 1/2] bootcount: add uclass for bootcount
Philipp Tomsich
- [U-Boot] [PATCH] test: bootcount: add bootcount-uclass test
Philipp Tomsich
- [U-Boot] [PATCH v2 1/2] bootcount: add uclass for bootcount
Philipp Tomsich
- [U-Boot] [PATCH] MAINTAINERS: update NXP i.MX mail list address
Philipp Tomsich
- [U-Boot] [U-Boot, v1] rockchip: rk3399-puma: Remove obsolete DTS node 'vcc5v0_host'.
Philipp Tomsich
- [U-Boot] [U-Boot, v3] rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node
Philipp Tomsich
- [U-Boot] ARM: rockchip: Add rv1108-elgin-r1 board support
Philipp Tomsich
- [U-Boot] Please pull u-boot-rockchip
Philipp Tomsich
- [U-Boot] [PATCH v3 4/8] dm: pinctrl: Add pinctrl_decode_pin_config_dm().
Philipp Tomsich
- [U-Boot] [PATCH] rockchip: sdram-common: fix size for 4GB in 32bit SoC
Philipp Tomsich
- [U-Boot] [PATCH v3 5/8] rockchip: rk3399: Add improved pinctrl driver.
Philipp Tomsich
- [U-Boot] u-boot-rockchip: firefly-rk3288 hangs on: Loading Environment from MMC
Philipp Tomsich
- [U-Boot] [PATCH 3/3] video: rockchip: Use TrueType fonts with jerry
Philipp Tomsich
- [U-Boot] [PATCH 1/3] video: Add information about using TrueType fonts
Philipp Tomsich
- [U-Boot] [PATCH 2/3] video: Add a default TrueType font
Philipp Tomsich
- [U-Boot] [PATCH 0/4] rockchip: sound: Add support for sound on chromebook_jerry
Philipp Tomsich
- [U-Boot] [PATCH v2] rockchip: sdram-common: fix wrong size for 4GB in 32bit SoC
Philipp Tomsich
- [U-Boot] [PATCH v2] rockchip: sdram-common: fix wrong size for 4GB in 32bit SoC
Philipp Tomsich
- [U-Boot] [PATCH 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now
Philipp Tomsich
- [U-Boot] [PATCH 2/2] rockchip: Drop call to rockchip_dnl_mode_check() for now
Philipp Tomsich
- [U-Boot] [PATCH] tools: zynqmpimage: round up partition size
Michael Tretter
- [U-Boot] [PATCH v2] tools: zynqmpimage: round up partition size
Michael Tretter
- [U-Boot] [PATCH] tools: zynqmpimage: round up partition size
Michael Tretter
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Michael Trimarchi
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Michael Trimarchi
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Michael Nazzareno Trimarchi
- [U-Boot] [linux-sunxi] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
Michael Nazzareno Trimarchi
- [U-Boot] SPL variant of sunxi nand module
Michael Nazzareno Trimarchi
- [U-Boot] [PATCH 6/7] doc: android: Add simple guide for A/B updates
Ruslan Trofymenko
- [U-Boot] [PATCH v2 0/7] android: Implement A/B boot process
Ruslan Trofymenko
- [U-Boot] [PATCH v2 1/7] cmd: part: Add 'number' sub-command
Ruslan Trofymenko
- [U-Boot] [PATCH v2 2/7] disk: part: Extend API to get partition info
Ruslan Trofymenko
- [U-Boot] [PATCH v2 3/7] common: Implement A/B metadata
Ruslan Trofymenko
- [U-Boot] [PATCH v2 4/7] cmd: Add 'ab_select' command
Ruslan Trofymenko
- [U-Boot] [PATCH v2 5/7] test/py: Add base test case for A/B updates
Ruslan Trofymenko
- [U-Boot] [PATCH v2 6/7] doc: android: Add simple guide for A/B updates
Ruslan Trofymenko
- [U-Boot] [PATCH v2 7/7] env: am57xx: Implement A/B boot process
Ruslan Trofymenko
- [U-Boot] [PATCH] qemu-arm: Add persistent environment support
Tuomas Tynkkynen
- [U-Boot] [PATCH v3 1/3] Don't enable CONFIG_SPL_DM_USB for non-DM SPL
Marek Vasut
- [U-Boot] [PULL] u-boot-sh/master
Marek Vasut
- [U-Boot] [PATCH 01/13] ARM: dts: rmobile: Add soc label to Gen3
Marek Vasut
- [U-Boot] [PATCH 02/13] ARM: dts: rmobile: Extract RPC node to u-boot specific DT
Marek Vasut
- [U-Boot] [PATCH 03/13] ARM: dts: rmobile: Extract USB nodes on M3N
Marek Vasut
- [U-Boot] [PATCH 04/13] ARM: dts: rmobile: Extract SDHI nodes on M3N
Marek Vasut
- [U-Boot] [PATCH 05/13] ARM: dts: rmobile: Extract AVB node extras on V3M Eagle
Marek Vasut
- [U-Boot] [PATCH 06/13] ARM: dts: rmobile: Extract CPLD node on H3 and M3W ULCB
Marek Vasut
- [U-Boot] [PATCH 07/13] ARM: dts: rmobile: Extract SDHI extras on H3 and M3W ULCB
Marek Vasut
- [U-Boot] [PATCH 08/13] ARM: dts: rmobile: Extract SDHI extras on H3, M3W, M3N Salvator-X
Marek Vasut
- [U-Boot] [PATCH 09/13] ARM: dts: rmobile: Extract SDHI nodes on E3 Ebisu
Marek Vasut
- [U-Boot] [PATCH 10/13] ARM: dts: rmobile: Extract SCIF2 node on E3 Ebisu
Marek Vasut
- [U-Boot] [PATCH 11/13] ARM: dts: rmobile: Extract i2c6 on M2W Porter
Marek Vasut
- [U-Boot] [PATCH 12/13] ARM: dts: rmobile: Sync Gen2 DTs with Linux 4.19.6
Marek Vasut
- [U-Boot] [PATCH 13/13] ARM: dts: rmobile: Sync Gen3 DTs with Linux 4.19.6
Marek Vasut
- [U-Boot] [PATCH] arm: mx5: Enable WDT and bootcounter on M53Menlo
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Enable MMC extensions on Gen3
Marek Vasut
- [U-Boot] [PATCH V2 01/13] ARM: dts: rmobile: Add soc label to Gen3
Marek Vasut
- [U-Boot] [PATCH V2 02/13] ARM: dts: rmobile: Extract RPC node to u-boot specific DT
Marek Vasut
- [U-Boot] [PATCH V2 03/13] ARM: dts: rmobile: Extract USB nodes on M3N
Marek Vasut
- [U-Boot] [PATCH V2 04/13] ARM: dts: rmobile: Extract SDHI nodes on M3N
Marek Vasut
- [U-Boot] [PATCH V2 05/13] ARM: dts: rmobile: Extract AVB node extras on V3M Eagle
Marek Vasut
- [U-Boot] [PATCH V2 06/13] ARM: dts: rmobile: Extract CPLD node on H3 and M3W ULCB
Marek Vasut
- [U-Boot] [PATCH V2 07/13] ARM: dts: rmobile: Extract SDHI extras on H3 and M3W ULCB
Marek Vasut
- [U-Boot] [PATCH V2 08/13] ARM: dts: rmobile: Extract SDHI extras on H3, M3W, M3N Salvator-X
Marek Vasut
- [U-Boot] [PATCH V2 09/13] ARM: dts: rmobile: Extract SDHI nodes on E3 Ebisu
Marek Vasut
- [U-Boot] [PATCH V2 10/13] ARM: dts: rmobile: Extract SCIF2 node on E3 Ebisu
Marek Vasut
- [U-Boot] [PATCH V2 11/13] ARM: dts: rmobile: Extract i2c6 on M2W Porter
Marek Vasut
- [U-Boot] [PATCH V2 12/13] ARM: dts: rmobile: Sync Gen2 DTs with Linux 4.19.6
Marek Vasut
- [U-Boot] [PATCH V2 13/13] ARM: dts: rmobile: Sync Gen3 DTs with Linux 4.19.6
Marek Vasut
- [U-Boot] [PATCH V2] ARM: rmobile: Enable MMC extensions
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Set environment variable containing CPU type
Marek Vasut
- [U-Boot] [PATCH] ARM: rmobile: Drop unused macros from Gen3 boards
Marek Vasut
- [U-Boot] [PATCH] ARM: dts: Turn Salvator-X into Multi-DTB config
Marek Vasut
- [U-Boot] [PATCH] ARM: dts: Turn ULCB into Multi-DTB config
Marek Vasut
- [U-Boot] [PULL] u-boot-sh/master
Marek Vasut
- [U-Boot] [PATCH 1/1] usb: musb-new: sunxi: Fix null pointer access
Marek Vasut
- [U-Boot] [PATCH 1/1] usb: musb-new: sunxi: Fix null pointer access
Marek Vasut
- [U-Boot] [PATCH] usb: dwc3: Add missing dependency on MISC uclass
Marek Vasut
- [U-Boot] [PATCH] usb: dwc3: Add missing dependency on MISC uclass
Marek Vasut
- [U-Boot] [PATCH] usb: dwc3: Add missing dependency on MISC uclass
Marek Vasut
- [U-Boot] New item at list end for backwards compatibility
Marek Vasut
- [U-Boot] [PATCH] usb: dwc2-otg: make regs_phy (in platdata) a uintptr_t
Marek Vasut
- [U-Boot] [PATCH] arm: mx5: Enable WDT and bootcounter on M53Menlo
Marek Vasut
- [U-Boot] [PATCH V2] arm: mx5: Enable WDT and bootcounter on M53Menlo
Marek Vasut
- [U-Boot] [PATCH v2] pcm058: fix NAND flash not using badblock table
Marek Vasut
- [U-Boot] [PATCH] usb: musb-new: Add CONFIG_USB_MUSB_INIT_TIMEOUT
Marek Vasut
- [U-Boot] [PATCH v2] pcm058: fix NAND flash not using badblock table
Marek Vasut
- [U-Boot] [PATCH] usb: musb-new: Add CONFIG_USB_MUSB_INIT_TIMEOUT
Marek Vasut
- [U-Boot] [PATCH] usb: musb-new: Add CONFIG_USB_MUSB_INIT_TIMEOUT
Marek Vasut
- [U-Boot] [PATCH 1/3] ARM: rcar_gen3: fix protection area access error at Cortex-A53
Marek Vasut
- [U-Boot] [PATCH 2/3] ARM: rcar_gen3: fix protection area access error
Marek Vasut
- [U-Boot] [PATCH 3/3] ARM: rmobile: Fix to enable icache early in Gen3
Marek Vasut
- [U-Boot] [PATCH 1/2] net: designware: fix tx packet length
Marek Vasut
- [U-Boot] [PATCH] drivers: block: Allow to cache 4K blocks by default
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PULL] u-boot-socfpga/master
Marek Vasut
- [U-Boot] [PULL] u-boot-sh/master
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu (09.12.2018)
Marek Vasut
- [U-Boot] [PATCH v3 1/3] Don't enable CONFIG_SPL_DM_USB for non-DM SPL
Marek Vasut
- [U-Boot] [RESEND PATCH v3 1/3] Don't enable CONFIG_SPL_DM_USB for non-DM SPL
Marek Vasut
- [U-Boot] [RESEND PATCH v3 1/3] Don't enable CONFIG_SPL_DM_USB for non-DM SPL
Marek Vasut
- [U-Boot] [PATCH] Drivers: USB: MUSB: Remove legacy CONFIG_USB_DA8XX
Marek Vasut
- [U-Boot] [PATCH 1/6] misc: Add JZ47xx efuse driver
Marek Vasut
- [U-Boot] [PATCH 0/6] Add support for MIPS Creator CI20
Marek Vasut
- [U-Boot] [PATCH 1/6] misc: Add JZ47xx efuse driver
Marek Vasut
- [U-Boot] [PATCH] Drivers: USB: MUSB: Remove legacy CONFIG_USB_DA8XX
Marek Vasut
- [U-Boot] [RFC PATCH] usb: composite: Fix max packet size for USB3.0
Marek Vasut
- [U-Boot] [PATCH V2] Drivers: USB: Remove Legacy CONFIG_USB_DAVINCI
Marek Vasut
- [U-Boot] [PATCH V2] Drivers: USB: MUSB: Remove legacy CONFIG_USB_DA8XX
Marek Vasut
- [U-Boot] [PATCH] m53menlo: fix addmtd cmd in default environment
Marek Vasut
- [U-Boot] [PATCH] m53menlo: fix splashfile location
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu (13.12.2018)
Marek Vasut
- [U-Boot] [PATCH] usb: composite: Fix max packet size for USB3.0
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu (13.12.2018)
Marek Vasut
- [U-Boot] [PATCH 1/1] usb: musb-new: sunxi: Fix null pointer access
Marek Vasut
- [U-Boot] [PATCH 1/1] usb: musb-new: sunxi: Fix null pointer access
Marek Vasut
- [U-Boot] [PATCH 1/1] usb: musb-new: sunxi: Fix null pointer access
Marek Vasut
- [U-Boot] U-Boot test failures; rebase on master
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH v1 1/2] dm: usb: udc: Use SEQ_ALIAS to index the USB gadget ports
Marek Vasut
- [U-Boot] [PATCH v5 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table
Marek Vasut
- [U-Boot] [PATCH v5 0/4] Stratix10 FPGA reconfiguration support
Marek Vasut
- [U-Boot] [PATCH v6 4/4] arm: socfpga: stratix10: Enable Stratix10 FPGA Reconfiguration
Marek Vasut
- [U-Boot] [PATCH v6 0/4] Stratix10 FPGA reconfiguration support
Marek Vasut
- [U-Boot] [PATCH] i2c: xiic: Add Xilinx AXI I2C driver
Marek Vasut
- [U-Boot] [PATCH v6 0/4] Stratix10 FPGA reconfiguration support
Marek Vasut
- [U-Boot] [PATCH v6 4/4] arm: socfpga: stratix10: Enable Stratix10 FPGA Reconfiguration
Marek Vasut
- [U-Boot] [PATCH v6 4/4] arm: socfpga: stratix10: Enable Stratix10 FPGA Reconfiguration
Marek Vasut
- [U-Boot] [PATCH] i2c: xiic: Add Xilinx AXI I2C driver
Marek Vasut
- [U-Boot] [PATCH V2] i2c: xiic: Add Xilinx AXI I2C driver
Marek Vasut
- [U-Boot] [PATCH] drivers: block: Allow to cache 4K blocks by default
Marek Vasut
- [U-Boot] [PATCH] mmc: dwmmc: Poll for iDMAC TX/RX interrupt
Marek Vasut
- [U-Boot] [PATCH v8 0/5] Stratix10 FPGA reconfiguration support
Marek Vasut
- [U-Boot] [PULL] u-boot-socfpga/master
Marek Vasut
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Marek Vasut
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Marek Vasut
- [U-Boot] [PATCH] rsa: read out public_exponent value based on 32-bit alignment
Marek Vasut
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Marek Vasut
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Marek Vasut
- [U-Boot] [PATCH] rsa: read out public_exponent value based on 32-bit alignment
Marek Vasut
- [U-Boot] [PATCH v3] net: phy: add TSE PCS support to dwmac-socfpga
Marek Vasut
- [U-Boot] [PATCH 0/6] Add support for loading FPGA bitstream
Marek Vasut
- [U-Boot] [PATCH 2/6] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
Marek Vasut
- [U-Boot] [PATCH 1/6] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
Marek Vasut
- [U-Boot] [PATCH 3/6] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
Marek Vasut
- [U-Boot] [PATCH 4/6] ARM: dts: socfpga: Add missing SDMMC reset
Marek Vasut
- [U-Boot] [PATCH 5/6] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
Marek Vasut
- [U-Boot] [PATCH 6/6] ARM: socfpga: Synchronize the configuration for A10 SoCDK
Marek Vasut
- [U-Boot] [PATCH] dm: usb: gadget: Fix boot breakage on sunxi platforms
Marek Vasut
- [U-Boot] [PATCH v5 17/26] phy: sun4i-usb: Use CLK and RESET support
Marek Vasut
- [U-Boot] [PATCH v5 19/26] musb-new: sunxi: Use CLK and RESET support
Marek Vasut
- [U-Boot] [PATCH] sf: Add support for Macronix mx25u12835f
Vladimir Vid
- [U-Boot] [PATCH 1/7] spi: update management of default speed and mode
Petr Vorel
- [U-Boot] [PATCH 2/7] spi: add comment for spi_flash_probe_bus_cs function
Petr Vorel
- [U-Boot] [PATCH 3/7] da850evm: sf: Read default speed and mode values from DT
Petr Vorel
- [U-Boot] [PATCH 4/7] dfu: sf: Read default speed and mode values from DT
Petr Vorel
- [U-Boot] [PATCH 5/7] mips: mt76xx: gardena-smart-gateway: Read default speed and mode values from DT
Petr Vorel
- [U-Boot] [PATCH 6/7] env: Read default speed and mode values from DT
Petr Vorel
- [U-Boot] [PATCH 7/7] spi: remove define for SPI default SPEED and MODE
Petr Vorel
- [U-Boot] [PATCH 0/7] Remove defines for SPI default speed and mode
Petr Vorel
- [U-Boot] [PATCH] env: add flash_read function
Horatiu Vultur
- [U-Boot] [PATCH] env: add flash_read function
Horatiu Vultur
- [U-Boot] [PATCH v2] env: add spi_flash_read_env function
Horatiu Vultur
- [U-Boot] MIPS (mt7688): EBase change in U-Boot breaks Linux
Horatiu Vultur
- [U-Boot] MIPS (mt7688): EBase change in U-Boot breaks Linux
Horatiu Vultur
- [U-Boot] [PATCH] spi: soft_spi: Fix null ptr when probing soft_spi.
Horatiu Vultur
- [U-Boot] [PATCH 5/7] defconfigs: Add config for DRA7xx High Security EVM with UART/USB Boot support
Lokesh Vutla
- [U-Boot] [PATCH 6/7] defconfigs: Add config for AM57xx High Security EVM with UART/USB Boot support
Lokesh Vutla
- [U-Boot] [PATCH 6/7] defconfigs: Add config for AM57xx High Security EVM with UART/USB Boot support
Lokesh Vutla
- [U-Boot] [PATCH v2 0/7] Add USB boot to HS DRA7xx/AM57xx
Lokesh Vutla
- [U-Boot] [PATCH v2] common: fdt_support: print hexadecimal numbers in debug
Lokesh Vutla
- [U-Boot] [PATCH] spl: fix build failure with !CONFIG_SPL_PCI_SUPPORT
Lokesh Vutla
- [U-Boot] [PATCH v3 2/2] core: ofnode: Add ofnode_get_addr_size_index
Lokesh Vutla
- [U-Boot] [GIT] Pull request: u-boot-dfu (13.12.2018)
Lokesh Vutla
- [U-Boot] [PATCH] am57xx_evm_defconfig: Enable YMODEM support
Lokesh Vutla
- [U-Boot] [PATCH] arm: K3: Fix usage of CONFIG_SYS_K3_KEY
Lokesh Vutla
- [U-Boot] [PATCH] power: regulator: Return success on attempt to disable an always-on regulator
Lokesh Vutla
- [U-Boot] [PATCH] power: regulator: Return success on attempt to disable an always-on regulator
Lokesh Vutla
- [U-Boot] [PATCH] power: regulator: Return success on attempt to disable an always-on regulator
Lokesh Vutla
- [U-Boot] u-boot-video/master fails test/py ut_dm_rtc_set_get
Stephen Warren
- [U-Boot] u-boot-video/master fails test/py ut_dm_rtc_set_get
Stephen Warren
- [U-Boot] Regression: dm: i2c: Make i2c_get_chip_for_busnum() fail if the chip is not detected
Stephen Warren
- [U-Boot] Regression: dm: i2c: Make i2c_get_chip_for_busnum() fail if the chip is not detected
Stephen Warren
- [U-Boot] Regression: dm: i2c: Make i2c_get_chip_for_busnum() fail if the chip is not detected
Stephen Warren
- [U-Boot] Regression: dm: i2c: Make i2c_get_chip_for_busnum() fail if the chip is not detected
Stephen Warren
- [U-Boot] Regression: dm: i2c: Make i2c_get_chip_for_busnum() fail if the chip is not detected
Stephen Warren
- [U-Boot] Please pull from u-boot-i2c
Stephen Warren
- [U-Boot] U-Boot test failures; rebase on master
Stephen Warren
- [U-Boot] [PATCH v8 10/10] arm: bootm: fix sp detection at end of address range
Stephen Warren
- [U-Boot] qemu x86 ide device not probing automatically with 2018.11
Joshua Watt
- [U-Boot] Unable to saveenv to MMC
Lothar Waßmann
- [U-Boot] list files on tftp / large kernel-image
Lothar Waßmann
- [U-Boot] SPL boot on linaro qemu
Matthew Weber
- [U-Boot] [PATCH v2 3/3] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin
Martyn Welch
- [U-Boot] [PATCH v2 3/3] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin
Martyn Welch
- [U-Boot] [PATCH v3 1/3] Don't enable CONFIG_SPL_DM_USB for non-DM SPL
Martyn Welch
- [U-Boot] [PATCH v3 2/3] Enable FEC driver to retrieve PHY address from device tree
Martyn Welch
- [U-Boot] [PATCH v3 3/3] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin
Martyn Welch
- [U-Boot] [PATCH v3 1/3] Don't enable CONFIG_SPL_DM_USB for non-DM SPL
Martyn Welch
- [U-Boot] [RESEND PATCH v3 1/3] Don't enable CONFIG_SPL_DM_USB for non-DM SPL
Martyn Welch
- [U-Boot] [RESEND PATCH v3 2/3] Enable FEC driver to retrieve PHY address from device tree
Martyn Welch
- [U-Boot] [RESEND PATCH v3 3/3] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin
Martyn Welch
- [U-Boot] [RESEND PATCH v3 3/3] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin
Martyn Welch
- [U-Boot] [RESEND PATCH v3 1/3] Don't enable CONFIG_SPL_DM_USB for non-DM SPL
Martyn Welch
- [U-Boot] [PATCH v4 1/2] Enable FEC driver to retrieve PHY address from device tree
Martyn Welch
- [U-Boot] [PATCH v4 2/2] imx: Add PHYTEC phyBOARD-i.MX6UL-Segin
Martyn Welch
- [U-Boot] [PATCH 1/1] tee: change return code for REE FS supplicant cmd
Jens Wiklander
- [U-Boot] [PATCH 1/3] buildman/toolchain.py: update versions
Trevor Woerner
- [U-Boot] [RFC] Monthly developer call?
Trevor Woerner
- [U-Boot] [PATCH] ARM: at91: Fix 'boot.bin' generation when CONFIG_SD_BOOT is enabled
Derald Woods
- [U-Boot] [PATCH] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
Derald Woods
- [U-Boot] boot.bin on SD Card for SAMA5D3 Xplained
Derald D. Woods
- [U-Boot] [PATCH] ARM: at91: Fix 'boot.bin' generation when CONFIG_SD_BOOT is enabled
Derald D. Woods
- [U-Boot] [PATCH] ARM: at91: Fix 'boot.bin' generation when CONFIG_SD_BOOT is enabled
Derald D. Woods
- [U-Boot] [PATCH] ARM: at91: Fix 'boot.bin' generation when CONFIG_SD_BOOT is enabled
Derald D. Woods
- [U-Boot] [PATCH] ARM: at91: Convert SPL_GENERATE_ATMEL_PMECC_HEADER to Kconfig
Derald D. Woods
- [U-Boot] U-Boot 2018.09 imx6ull mass storage issue
Michał Wołowik
- [U-Boot] [PATCH v3 5/8] rockchip: rk3399: Add improved pinctrl driver.
David Wu
- [U-Boot] [PATCH v3 5/8] rockchip: rk3399: Add improved pinctrl driver.
David Wu
- [U-Boot] [PATCH v3 5/8] rockchip: rk3399: Add improved pinctrl driver.
David Wu
- [U-Boot] [PATCH v4 0/7] Fix CVE-2018-18440 and CVE-2018-18439
Frank Wunderlich
- [U-Boot] [PATCH v4 0/7] Fix CVE-2018-18440 and CVE-2018-18439
Frank Wunderlich
- [U-Boot] add default-option to bootmenu
Frank Wunderlich
- [U-Boot] list files on tftp / large kernel-image
Frank Wunderlich
- [U-Boot] list files on tftp / large kernel-image
Frank Wunderlich
- [U-Boot] Fw: Aw: Re: [PATCH v4 0/7] Fix CVE-2018-18440 and CVE-2018-18439
Frank Wunderlich
- [U-Boot] list files on tftp / large kernel-image
Frank Wunderlich
- [U-Boot] [PATCH v4 0/7] Fix CVE-2018-18440 and CVE-2018-18439
Frank Wunderlich
- [U-Boot] add default-option to bootmenu
Frank Wunderlich
- [U-Boot] ensure active menuitem is inside menu
Frank Wunderlich
- [U-Boot] ensure active menuitem is inside menu
Frank Wunderlich
- [U-Boot] adding saveenv-command for bananapi r2
Frank Wunderlich
- [U-Boot] adding saveenv-command for bananapi r2
Frank Wunderlich
- [U-Boot] [PATCH v2] adding saveenv-command for bananapi r2
Frank Wunderlich
- [U-Boot] Unable to saveenv to MMC
Frank Wunderlich
- [U-Boot] [PATCH v8 10/10] arm: bootm: fix sp detection at end of address range
Frank Wunderlich
- [U-Boot] getting usb working
Frank Wunderlich
- [U-Boot] getting usb working
Frank Wunderlich
- [U-Boot] [PATCH 05/11] ethernet: MediaTek: add ethernet driver for MediaTek ARM-based SoCs
Frank Wunderlich
- [U-Boot] [PATCH 05/11] ethernet: MediaTek: add ethernet driver for MediaTek ARM-based SoCs
Frank Wunderlich
- [U-Boot] [PATCH 05/11] ethernet: MediaTek: add ethernet driver for MediaTek ARM-based SoCs
Frank Wunderlich
- [U-Boot] list files on tftp / large kernel-image
Frank Wunderlich
- [U-Boot] list files on tftp / large kernel-image
Frank Wunderlich
- [U-Boot] list files on tftp / large kernel-image
Frank Wunderlich
- [U-Boot] list files on tftp / large kernel-image
Frank Wunderlich
- [U-Boot] list files on tftp / large kernel-image
Frank Wunderlich
- [U-Boot] list files on tftp / large kernel-image
Frank Wunderlich
- [U-Boot] [PATCH v9 10/10] arm: bootm: fix sp detection at end of address range
Frank Wunderlich
- [U-Boot] [PATCH v9 10/10] arm: bootm: fix sp detection at end of address range
Frank Wunderlich
- [U-Boot] [PATCH 20/21] Add inttypes.h
Masahiro Yamada
- [U-Boot] [PATCH 0/9] ARM: dts: uniphier: updates for v2019.01
Masahiro Yamada
- [U-Boot] [PATCH 1/9] ARM: uniphier: do not modify bootcmd environment variable at run-time
Masahiro Yamada
- [U-Boot] [PATCH 2/9] ARM: uniphier: allow to source boot script before distro-boot
Masahiro Yamada
- [U-Boot] [PATCH 3/9] ARM: uniphier: add CONFIG_PREBOOT
Masahiro Yamada
- [U-Boot] [PATCH 4/9] linux/kernel.h: import DIV_ROUND_CLOSEST_ULL from Linux
Masahiro Yamada
- [U-Boot] [PATCH 5/9] mtd: rawnand: denali_dt: add more clocks based on IP datasheet
Masahiro Yamada
- [U-Boot] [PATCH 6/9] mtd: rawnand: denali: optimize timing parameters for data interface
Masahiro Yamada
- [U-Boot] [PATCH 7/9] mtd: rawnand: denali: fix a race condition when DMA is kicked
Masahiro Yamada
- [U-Boot] [PATCH 8/9] clk: uniphier: add NAND 200MHz clock
Masahiro Yamada
- [U-Boot] [PATCH 9/9] ARM: uniphier: dts: sync with Linux 4.20-rc7
Masahiro Yamada
- [U-Boot] [GIT PULL] UniPhier updates for v2019.01
Masahiro Yamada
- [U-Boot] [PATCH v2] rockchip: rk3399: Initialize CPU B clock.
Kever Yang
- [U-Boot] [PATCH] rockchip: rk3288: dts: remove 'vmmc' from emmc node
Kever Yang
- [U-Boot] Please pull u-boot-dm
Kever Yang
- [U-Boot] [PATCH] Revert "serial: ns16550: fix debug uart putc called before init"
Kever Yang
- [U-Boot] about rk3399 boot speed
Kever Yang
- [U-Boot] [PATCH] rockchip: rk3288: dts: remove 'vmmc' from emmc node
Kever Yang
- [U-Boot] Uboot File not found in MMC
Kever Yang
- [U-Boot] [ANN] U-Boot v2019.01-rc1 released
Kever Yang
- [U-Boot] [ANN] U-Boot v2019.01-rc1 released
Kever Yang
- [U-Boot] [PATCH] rockchip: rk322x: ram: enable DRAM init in SPL instead of TPL
Kever Yang
- [U-Boot] [PATCH] rockchip: rk3288: dts: remove 'vmmc' from emmc node
Kever Yang
- [U-Boot] [PATCH v2] rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node
Kever Yang
- [U-Boot] [PATCH v2] rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node
Kever Yang
- [U-Boot] [PATCH v2] rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node
Kever Yang
- [U-Boot] [PATCH v2] rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node
Kever Yang
- [U-Boot] [PATCH v3] rockchip: rk3288-evb: dts: remove 'vmmc' from emmc node
Kever Yang
- [U-Boot] [PATCH] board: rockchip: rk3399: add Rockpro64 board support
Kever Yang
- [U-Boot] [PATCH 1/2] rockchip: rk3036: ram: update license
Kever Yang
- [U-Boot] [PATCH 2/2] rockchip: ram: update license for sdram driver
Kever Yang
- [U-Boot] u-boot-rockchip: firefly-rk3288 hangs on: Loading Environment from MMC
Kever Yang
- [U-Boot] [PATCH] rockchip: sdram-common: fix size for 4GB in 32bit SoC
Kever Yang
- [U-Boot] [PATCH v3 5/8] rockchip: rk3399: Add improved pinctrl driver.
Kever Yang
- [U-Boot] [PATCH] rockchip: sdram-common: fix size for 4GB in 32bit SoC
Kever Yang
- [U-Boot] [PATCH v2] rockchip: sdram-common: fix wrong size for 4GB in 32bit SoC
Kever Yang
- [U-Boot] U-boot issues on Raspberry Pi 3B
Takashi Yoshi
- [U-Boot] [PATCH v1] mmc: fsl_esdhc: make get_cd work well in dm_mmc_ops
Yinbo Zhu
- [U-Boot] SPL debug messages (All of them!) - how?
Nikolai Zhubr
- [U-Boot] SPL debug messages (All of them!) - how?
Nikolai Zhubr
- [U-Boot] SPL debug messages (All of them!) - how?
Nikolai Zhubr
- [U-Boot] SPL variant of sunxi nand module
Nikolai Zhubr
- [U-Boot] SPL variant of sunxi nand module
Nikolai Zhubr
- [U-Boot] [PATCH] Yet another old Hynix chip id.
Nikolai Zhubr
- [U-Boot] SPL variant of sunxi nand module
Nikolai Zhubr
- [U-Boot] SPL variant of sunxi nand module
Nikolai Zhubr
- [U-Boot] SPL variant of sunxi nand module
Nikolai Zhubr
- [U-Boot] SPL variant of sunxi nand module
Nikolai Zhubr
- [U-Boot] A20-olinuxino-micro hangs in U-boot if powered from MINI-USB only.
Nikolai Zhubr
- [U-Boot] [linux-sunxi] A20-olinuxino-micro hangs in U-boot if powered from MINI-USB only.
Nikolai Zhubr
- [U-Boot] [linux-sunxi] A20-olinuxino-micro hangs in U-boot if powered from MINI-USB only.
Nikolai Zhubr
- [U-Boot] [PATCH] Add Hynix H27UBG8T2BTR id
Nikolai Zhubr
- [U-Boot] [PATCH] Add NFC register definitions for Allwinner A20 SoC
Nikolai Zhubr
- [U-Boot] [linux-sunxi] [PATCH] Add NFC register definitions for Allwinner A20 SoC
Nikolai Zhubr
- [U-Boot] [linux-sunxi] A20-olinuxino-micro hangs in U-boot if powered from MINI-USB only.
Nikolai Zhubr
- [U-Boot] SPL variant of sunxi nand module
Nikolai Zhubr
- [U-Boot] [PATCH] Add Hynix H27UBG8T2BTR id
Nikolai Zhubr
- [U-Boot] Uboot send pull request
uboot at andestech.com
- [U-Boot] Uboot send pull request
uboot at andestech.com
- [U-Boot] fighting with unreliable designware-based 1G debug port
rpjday at crashcourse.ca
- [U-Boot] ARP Retry count exceeded
den4ya
- [U-Boot] [PATCH v3 1/1] dm: core: add functions to get/remap I/O addresses by name
sjg at google.com
- [U-Boot] [PATCH] binman: Add myself as maintainer
sjg at google.com
- [U-Boot] [PATCH] dm: (re)sort uclass ids alphabetically
sjg at google.com
- [U-Boot] [PATCH] dm: rtc: Fix function name in comment
sjg at google.com
- [U-Boot] [PATCH 19/21] Add UINT32_MAX and UINT64_MAX
sjg at google.com
- [U-Boot] [PATCH 20/21] Add inttypes.h
sjg at google.com
- [U-Boot] [PATCH 17/21] time: Update mdelay() to delay in one large chunk
sjg at google.com
- [U-Boot] [PATCH 16/21] video: backlight: Fix log message in enable_sequence()
sjg at google.com
- [U-Boot] [PATCH 14/21] cros_ec: Adjust to use v1 vboot context only
sjg at google.com
- [U-Boot] [PATCH 15/21] input: i8042: Use remove() instead of exported functions
sjg at google.com
- [U-Boot] [PATCH 13/21] cros: Correct a printf() string and comment
sjg at google.com
- [U-Boot] [PATCH 12/21] tpm: Fix a logging warning in unpack_byte_string()
sjg at google.com
- [U-Boot] [PATCH 11/21] tpm: Add non-volatile index attributes needed for v2
sjg at google.com
- [U-Boot] [PATCH 10/21] tpm: Export tpm_clear_and_reenable()
sjg at google.com
- [U-Boot] [PATCH 09/21] tpm: Remove use of build-time TPM versions
sjg at google.com
- [U-Boot] [PATCH 07/21] sandbox: Use 'extras' to specify 'head' files
sjg at google.com
- [U-Boot] [PATCH 06/21] sandbox: Zero the ram buffer on startup
sjg at google.com
- [U-Boot] [PATCH 05/21] sandbox: sysreset: Update to support power-on reset
sjg at google.com
- [U-Boot] [PATCH 04/21] sandbox: net: Correct name copy in eth_raw_bus_post_bind()
sjg at google.com
- [U-Boot] [PATCH 03/21] sandbox: physmem: Use mapping to support sandbox
sjg at google.com
- [U-Boot] [PATCH 01/21] sandbox: Fix up the debug message for the image filename
sjg at google.com
- [U-Boot] [PATCH 02/21] sandbox: Check the filename in jump_to_image_no_args()
sjg at google.com
- [U-Boot] [PATCH 3/3] buildman/toolchain.py: handle inconsistent tarball names
sjg at google.com
- [U-Boot] [PATCH v3 7/7] x86: acpi: Generate SPCR table
sjg at google.com
- [U-Boot] [PATCH v3 6/7] x86: acpi: Add SPCR table description
sjg at google.com
- [U-Boot] [PATCH v3 5/7] serial: ns16550: Provide ->getinfo() implementation
sjg at google.com
- [U-Boot] [PATCH v3 4/7] serial: ns16550: Read reg-io-width from device tree
sjg at google.com
- [U-Boot] [PATCH v3 3/7] serial: ns16550: Group reg_* members of ns16550_platdata
sjg at google.com
- [U-Boot] [PATCH v3 2/7] dm: serial: Introduce ->getinfo() callback
sjg at google.com
- [U-Boot] [PATCH v3 1/7] dm: serial: Add ->getconfig() callback
sjg at google.com
- [U-Boot] [PATCH 17/30] dm: sound: wm8994: Drop wm8994_i2c_init()
sjg at google.com
- [U-Boot] [PATCH 18/30] dm: sound: Fix up header ordering
sjg at google.com
- [U-Boot] [PATCH 16/30] dm: sound: max98095: Drop g_codec_info and g_max98095_info
sjg at google.com
- [U-Boot] [PATCH 15/30] dm: sound: wm8994: Drop g_codec_info and g_wm8994_info
sjg at google.com
- [U-Boot] [PATCH 14/30] dm: sound: max98095: Drop global i2c-address variable
sjg at google.com
- [U-Boot] [PATCH 13/30] dm: sound: wm8994: Drop global i2c-address variable
sjg at google.com
- [U-Boot] [PATCH 12/30] dm: sound: max98095: Split out interface setup code
sjg at google.com
- [U-Boot] [PATCH 11/30] dm: sound: wm899c: Split out interface setup code
sjg at google.com
- [U-Boot] [PATCH 10/30] dm: sound: wm8994: Create a new common init function
sjg at google.com
- [U-Boot] [PATCH 08/30] dm: sound: wm8994: Pass private data to internal functions
sjg at google.com
- [U-Boot] [PATCH 09/30] dm: sound: max98095: Pass private data to internal functions
sjg at google.com
- [U-Boot] [PATCH 07/30] dm: sound: Drop codec_type
sjg at google.com
- [U-Boot] [PATCH 05/30] dm: sound: Drop unused pre-device-tree code
sjg at google.com
- [U-Boot] [PATCH 06/30] dm: sound: samsung: Rename i2stx_info to samsung_i2s_priv
sjg at google.com
- [U-Boot] [PATCH 04/30] dm: sound: Rename en_sound_codec to sound_codec
sjg at google.com
- [U-Boot] [PATCH 03/30] dm: sound: samsung: Make local function static
sjg at google.com
- [U-Boot] [PATCH 02/30] snow: Expand U-Boot size
sjg at google.com
- [U-Boot] [PATCH 01/30] sandbox: Increase the pre-relocation memory
sjg at google.com
- [U-Boot] [PATCH v2 22/22] dm: sound: Use the correct number of channels for sound
sjg at google.com
- [U-Boot] [PATCH v2 21/22] dm: sandbox: Allow selection of sample rate and channels
sjg at google.com
- [U-Boot] [PATCH v2 20/22] dm: sound: max98095: Tidy up error codes
sjg at google.com
- [U-Boot] [PATCH v2 19/22] dm: sound: Fix license headers
sjg at google.com
- [U-Boot] [PATCH v2 18/22] dm: sound: Complete migration to driver model
sjg at google.com
- [U-Boot] [PATCH v2 17/22] dm: exynos: Drop CONFIG_DM_I2C_COMPAT
sjg at google.com
- [U-Boot] [PATCH v2 16/22] dm: sandbox: sound: Convert to use driver model
sjg at google.com
- [U-Boot] [PATCH v2 15/22] dm: exynos: sound: Convert to use driver model
sjg at google.com
- [U-Boot] [PATCH v2 14/22] dm: sound: exynos: Add support for max98090
sjg at google.com
- [U-Boot] [PATCH v2 13/22] dm: sound: Move common code out of maxim98095
sjg at google.com
- [U-Boot] [PATCH v2 12/22] exynos: Add support for exynos5420 i2s pinmux
sjg at google.com
- [U-Boot] [PATCH v2 11/22] exynos: Add proid_is_exynos542x() for common 542x
sjg at google.com
- [U-Boot] [PATCH v2 10/22] dm: sound: Add conversion to driver model
sjg at google.com
- [U-Boot] [PATCH v2 09/22] dm: sound: Start i2c IDs from 0
sjg at google.com
- [U-Boot] [PATCH v2 08/22] dm: core: Add a function to read into a unsigned int
sjg at google.com
- [U-Boot] [PATCH v2 07/22] dm: sound: Create a uclass for sound
sjg at google.com
- [U-Boot] [PATCH v2 06/22] dm: sandbox: Update sound to use two buffers
sjg at google.com
- [U-Boot] [PATCH v2 05/22] dm: sound: Create a uclass for i2s
sjg at google.com
- [U-Boot] [PATCH v2 04/22] dm: sound: Create a uclass for audio codecs
sjg at google.com
- [U-Boot] [PATCH v2 03/22] dm: sound: Rename samsung_i2s_priv to i2s_uc_priv
sjg at google.com
- [U-Boot] [PATCH v2 02/22] dm: sound: Create an option to use driver model for sound
sjg at google.com
- [U-Boot] [PATCH v2 01/22] dm: sound: exynos: Correct codec bus addresses
sjg at google.com
- [U-Boot] [PATCH] test: dm: regmap: Fix the long test delay
sjg at google.com
- [U-Boot] [PATCH v2] common: fdt_support: print hexadecimal numbers in debug
sjg at google.com
- [U-Boot] [PATCH] dm: Tidy up 'dm tree' output when there are many devices
sjg at google.com
- [U-Boot] [PATCH 3/3] travis: Use buildman for building with clang
sjg at google.com
- [U-Boot] [PATCH 2/3] buildman: Add support for building with clang
sjg at google.com
- [U-Boot] [PATCH 1/3] buildman: Drop comment about Ctrl-C problem
sjg at google.com
- [U-Boot] [PATCH] sandbox: add memset_io(..), memcpy_fromio(..) and memcpy_toio(..)
sjg at google.com
- [U-Boot] [PATCH 18/21] log: Check printf() arguments
sjg at google.com
- [U-Boot] [PATCH v6 0/4] Stratix10 FPGA reconfiguration support
chee.hong.ang at intel.com
- [U-Boot] [PATCH v6 1/4] arm: socfpga: stratix10: Add macros for mailbox's arguments
chee.hong.ang at intel.com
- [U-Boot] [PATCH v6 2/4] arm: socfpga: stratix10: Add Stratix 10 FPGA Reconfiguration Driver
chee.hong.ang at intel.com
- [U-Boot] [PATCH v6 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table
chee.hong.ang at intel.com
- [U-Boot] [PATCH v6 4/4] arm: socfpga: stratix10: Enable Stratix10 FPGA Reconfiguration
chee.hong.ang at intel.com
- [U-Boot] [PATCH v7 0/4] Stratix10 FPGA reconfiguration support
chee.hong.ang at intel.com
- [U-Boot] [PATCH v7 1/4] arm: socfpga: stratix10: Add macros for mailbox's arguments
chee.hong.ang at intel.com
- [U-Boot] [PATCH v7 2/4] arm: socfpga: stratix10: Add Stratix 10 FPGA Reconfiguration Driver
chee.hong.ang at intel.com
- [U-Boot] [PATCH v7 3/4] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table
chee.hong.ang at intel.com
- [U-Boot] [PATCH v7 4/4] arm: socfpga: stratix10: Enable Stratix10 FPGA Reconfiguration
chee.hong.ang at intel.com
- [U-Boot] [PATCH v8 0/5] Stratix10 FPGA reconfiguration support
chee.hong.ang at intel.com
- [U-Boot] [PATCH v8 1/5] arm: socfpga: stratix10: Add generic FPGA reconfig mailbox API for S10
chee.hong.ang at intel.com
- [U-Boot] [PATCH v8 2/5] arm: socfpga: stratix10: Add macros for mailbox's arguments
chee.hong.ang at intel.com
- [U-Boot] [PATCH v8 3/5] arm: socfpga: stratix10: Add Stratix 10 FPGA Reconfiguration Driver
chee.hong.ang at intel.com
- [U-Boot] [PATCH v8 4/5] arm: socfpga: stratix10: Add Stratix10 FPGA into FPGA device table
chee.hong.ang at intel.com
- [U-Boot] [PATCH v8 5/5] arm: socfpga: stratix10: Enable Stratix10 FPGA Reconfiguration
chee.hong.ang at intel.com
- [U-Boot] [PATCH] misc: fs_loader: Switching private data allocation to DM auto allocation
tien.fong.chee at intel.com
- [U-Boot] [PATCH] Add support for initializing MMC
tien.fong.chee at intel.com
- [U-Boot] [PATCH] Add support for initializing MMC
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2] Add support for initializing MMC
tien.fong.chee at intel.com
- [U-Boot] [PATCH v2] misc: fs_loader: Add support for initializing MMC
tien.fong.chee at intel.com
- [U-Boot] [PATCH 0/6] Add support for loading FPGA bitstream
tien.fong.chee at intel.com
- [U-Boot] [PATCH 1/6] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10
tien.fong.chee at intel.com
- [U-Boot] [PATCH 2/6] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading
tien.fong.chee at intel.com
- [U-Boot] [PATCH 3/6] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK
tien.fong.chee at intel.com
- [U-Boot] [PATCH 4/6] ARM: dts: socfpga: Add missing SDMMC reset
tien.fong.chee at intel.com
- [U-Boot] [PATCH 5/6] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs
tien.fong.chee at intel.com
- [U-Boot] [PATCH 6/6] ARM: socfpga: Synchronize the configuration for A10 SoCDK
tien.fong.chee at intel.com
- [U-Boot] UBIFS Problems with U-boot 2018.1 & 4.14 Linux
jbd1986
- [U-Boot] boot.bin on SD Card for SAMA5D3 Xplained
Eugen.Hristev at microchip.com
- [U-Boot] boot.bin on SD Card for SAMA5D3 Xplained
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH] ARM: at91: Fix 'boot.bin' generation when CONFIG_SD_BOOT is enabled
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH] ARM: at91: Fix 'boot.bin' generation when CONFIG_SD_BOOT is enabled
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH] ARM: at91: Fix 'boot.bin' generation when CONFIG_SD_BOOT is enabled
Eugen.Hristev at microchip.com
- [U-Boot] [PATCH 1/6] mips: luton+ocelot: Remove board-specific config options
Lars.Povlsen at microchip.com
- [U-Boot] [PATCH 1/6] mips: mscc_sgpio: Add the MSCC serial GPIO device (SIO)
Lars.Povlsen at microchip.com
- [U-Boot] [PATCH] armv8: fsl-layerscape: properly configure qdma ICID
laurentiu.tudor at nxp.com
- [U-Boot] Unable to saveenv to MMC
frank-w at public-files.de
- [U-Boot] about rk3399 boot speed
klaus.goger at theobroma-systems.com
- [U-Boot] [PATCH] am57xx_evm_defconfig: Enable YMODEM support
yan-liu at ti.com
- [U-Boot] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
karlp at tweak.net.au
- [U-Boot] [PATCH] Revert "sunxi: board: Print error after power initialization fails"
karlp at tweak.net.au
- [U-Boot] Uboot File not found in MMC
Kasiviswanathan.Venkatakrishnan at us.fujitsu.com
- [U-Boot] Uboot File not found in MMC
Kasiviswanathan.Venkatakrishnan at us.fujitsu.com
- [U-Boot] Uboot File not found in MMC
Kasiviswanathan.Venkatakrishnan at us.fujitsu.com
- [U-Boot] [PATCH] imx6: apalis: Make the boot process more generic
Petr Štetiar
- [U-Boot] U-Boot 2019.01-rc1-00337-g42cc2cf partition table issues on imx6
Petr Štetiar
- [U-Boot] U-Boot 2019.01-rc1-00337-g42cc2cf partition table issues on imx6
Petr Štetiar
- [U-Boot] [PATCH v2] imx6: apalis: Make the boot process more generic
Petr Štetiar
- [U-Boot] network not work with u-boot
张国富
Last message date:
Mon Dec 31 19:31:19 UTC 2018
Archived on: Tue Jan 1 05:10:00 UTC 2019
This archive was generated by
Pipermail 0.09 (Mailman edition).